Re: Crash in acpi_ns_validate_handle triggered by soundwire on Linux 5.10

["Rafael J. Wysocki" <rafael@kernel.org>]

On Thu, Jan 28, 2021 at 2:29 PM Marcin Ślusarz <marcin.slusarz@gmail.com> wrote:
>
> czw., 28 sty 2021 o 13:13 Rafael J. Wysocki <rafael@kernel.org> napisał(a):
> >
> > On Wed, Jan 27, 2021 at 8:19 PM Marcin Ślusarz <marcin.slusarz@gmail.com> wrote:
> > >
> > > śr., 27 sty 2021 o 18:28 Pierre-Louis Bossart
> > > <pierre-louis.bossart@linux.intel.com> napisał(a):
> > > > > Weird, I can't reproduce this problem with my self-compiled kernel :/
> > > > > I don't even see soundwire modules loaded in. Manually loading them of course
> > > > > doesn't do much.
> > > > >
> > > > > Previously I could boot into the "faulty" kernel by using "recovery mode", but
> > > > > I can't do that anymore - it crashes too.
> > > > >
> > > > > Maybe there's some kind of race and this bug depends on some specific
> > > > > ordering of events?
> > > >
> > > > missing Kconfig?
> > > > You need CONFIG_SOUNDWIRE and CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE
> > > > selected to enter this sdw_intel_acpi_scan() routine.
> > >
> > > It was a PEBKAC, but a slightly different one. I won't bore you with
> > > (embarrassing) details ;).
> > >
> > > I reproduced the problem, tested both your and Rafael's patches
> > > and the kernel still crashes, with the same stack trace.
> > > (Yes, I'm sure I booted the right kernel :)
> > >
> > > Why "recovery mode" stopped working (or worked previously) is still a mystery.
> >
> > So for clarity, you've tried this:
> >
> > static int snd_intel_dsp_check_soundwire(struct pci_dev *pci)
> > {
> >     struct sdw_intel_acpi_info info;
> >     acpi_handle handle;
> >     int ret;
> >
> >     handle = ACPI_HANDLE(&pci->dev);
> >     if (!handle)
> >         return -ENODEV;
> >
> > and it has not made a difference?
>
> yes, I tried the same and it made no difference
>
> >
> > And the relevant part of the trace is:
> >
> > RIP: 0010:acpi_ns_validate_handle+0x1a/0x23
> > Code: 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 1f 44 00 00
> > 48 8d 57 ff 48 89 f8 48 83 fa fd 76 08 48 8b 05 0c b8 67 01 c3 <80> 7f
> > 08 0f 74 02 31 c0 c3 0f 1f 44 00 00 48 8b 3d f6 b7 67 01 e8
> > RSP: 0000:ffffc388807c7b20 EFLAGS: 00010213
> > RAX: 0000000000000048 RBX: ffffc388807c7b70 RCX: 0000000000000000
> > RDX: 0000000000000047 RSI: 0000000000000246 RDI: 0000000000000048
> > RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
> > R10: ffffffffc0f5f4d1 R11: ffffffff8f0cb268 R12: 0000000000001001
> > R13: ffffffff8e33b160 R14: 0000000000000048 R15: 0000000000000000
> > FS:  00007f24548288c0(0000) GS:ffff9f781fb80000(0000) knlGS:0000000000000000
> > CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: 0000000000000050 CR3: 0000000106158004 CR4: 0000000000770ee0
> > PKRU: 55555554
> > Call Trace:
> >  acpi_get_data_full+0x4d/0x92
> >  acpi_bus_get_device+0x1f/0x40
> >  sdw_intel_acpi_scan+0x59/0x230 [soundwire_intel]
> >  ? strstr+0x22/0x60
> >  ? dmi_matches+0x76/0xe0
> >  snd_intel_dsp_driver_probe.cold+0xaf/0x163 [snd_intel_dspcfg]
> >  azx_probe+0x7a/0x970 [snd_hda_intel]
> >  local_pci_probe+0x42/0x80
> >  ? _cond_resched+0x16/0x40
> >  pci_device_probe+0xfd/0x1b0
> >
> > so it looks like we got to sdw_intel_acpi_scan() with a non-NULL, but
> > otherwise invalid parent_handle which then was passed to
> > acpi_bus_get_device().  Subsequently it got to acpi_get_data_full()
> > and acpi_ns_validate_handle() that crashed, because it tried to
> > dereference it via ACPI_GET_DESCRIPTOR_TYPE().
> >
> > To debug it further, can you please modify
> > snd_intel_dsp_check_soundwire() to read like this:
> >
> > static int snd_intel_dsp_check_soundwire(struct pci_dev *pci)
> > {
> >     struct sdw_intel_acpi_info info;
> >     struct acpi_device *adev = NULL;
> >     acpi_handle handle;
> >     int ret;
> >
> >     handle = ACPI_HANDLE(&pci->dev);
> >     if (!handle)
> >         return -ENODEV;
> >
> >     if (acpi_bus_get_device(handle, &adev))
> >         return -ENODEV;
> >
> > and see what happens then?
>
> still, the same crash
>
> just to be sure, I added printks there and none of these 2 error paths are hit,
> but my printk after these changes is hit

So we have a valid ACPI handle for the given parent PCI device.

OK, please try to run this with the ACPICA debug enabled as mentioned
in one of the previous messages.

Something fishy seems to be going on in there.