[PATCH v6 0/3] Add support for es8388 and hdmi audio on the rock2

[PATCH v6 0/3] Add support for es8388 and hdmi audio on the rock2

[Romain Perier]

This set of patches adds a machine driver for rk3288-based boards that have
the built-in HDMI audio and a generic analog output. It also adds slave mode
to the es8328 driver that currently only supported the master mode. Then, it
adds the required DT definitions to link rockchip-i2s to the es8388 analog
output and to hdmi audio.

This work is based on the initial work that was done by Sjoerd Simons
<sjoerd.simons@collabora.co.uk> with some improvements, changes and more
commits.

Changes in v6:
 - Fixed bad error handling for gpio in rk3288_analog_hdmi.c
 - Removed message duplication in rk_hw_params(), in rk3288_analog_hdmi.c
 - Removed patch 1/4 (from the previous series), as it has been merged
Changes in v5:
 - Fixed coding style issue in patch 2/4 (the switch case).
 - Moved the code for the master mode and the slave mode into the switch case for patch 2/4
 - Fixed error handling for patch 3/4
Changes in v4:
 - Add support for multi codecs in the asoc machine driver, so the driver
   matches the hw architecture (analog and hdmi audio are connected on
   the same i2s line)
 - Renamed the driver to rk3288-hdmi-analog.c and changed its
   documentation
 - Add built-in support for hdmi audio in this driver
 - Add support for the property 'rockchip,routing'

Changes in v3:
 - Cosmetic changes in rockchip_es8388.c
 - Added missing email to MODULE_AUTHOR in rockchip_es8388.c
Changes in v2:
 - Fixed wrong use of the data structure i2c_device_id
 - Fixed wrong dependencies for SND_SOC_ROCKCHIP_ES8388

Romain Perier (3):
  ASoC: es8328: Add support for slave mode
  ASoC: rockchip: Add machine driver for RK3288 boards that use
    analog/HDMI
  arm: dts: Add support for ES8388 to the Radxa Rock 2

 .../bindings/sound/rockchip,rk3288-hdmi-analog.txt |  36 +++
 arch/arm/boot/dts/rk3288-rock2-square.dts          |  39 +++
 sound/soc/codecs/es8328.c                          |  20 +-
 sound/soc/rockchip/Kconfig                         |  10 +
 sound/soc/rockchip/Makefile                        |   2 +
 sound/soc/rockchip/rk3288_hdmi_analog.c            | 299 +++++++++++++++++++++
 6 files changed, 400 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt
 create mode 100644 sound/soc/rockchip/rk3288_hdmi_analog.c

-- 
2.9.3

[PATCH v6 1/3] ASoC: es8328: Add support for slave mode

[Romain Perier]

Currently, the function that changes the DAI format only supports master
mode. Trying to use a slave mode exits the function with -EINVAL and
leave the codec misconfigured. This commits adds support for enabling
the slave mode.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
---

Changes in v6: None
Changes in v5:
 - Fixed coding style issue for the switch case
 - Moved the code for master mode and slave mode to the switch case

Changes in v4: None
Changes in v3: None
Changes in v2: None

 sound/soc/codecs/es8328.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c
index 37722194..3f84fbd 100644
--- a/sound/soc/codecs/es8328.c
+++ b/sound/soc/codecs/es8328.c
@@ -589,9 +589,21 @@ static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	u8 dac_mode = 0;
 	u8 adc_mode = 0;
 
-	/* set master/slave audio interface */
-	if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBM_CFM)
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Master serial port mode, with BCLK generated automatically */
+		snd_soc_update_bits(codec, ES8328_MASTERMODE,
+				    ES8328_MASTERMODE_MSC,
+				    ES8328_MASTERMODE_MSC);
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Slave serial port mode */
+		snd_soc_update_bits(codec, ES8328_MASTERMODE,
+				    ES8328_MASTERMODE_MSC, 0);
+		break;
+	default:
 		return -EINVAL;
+	}
 
 	/* interface format */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
@@ -620,10 +632,6 @@ static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	snd_soc_update_bits(codec, ES8328_ADCCONTROL4,
 			ES8328_ADCCONTROL4_ADCFORMAT_MASK, adc_mode);
 
-	/* Master serial port mode, with BCLK generated automatically */
-	snd_soc_update_bits(codec, ES8328_MASTERMODE,
-			ES8328_MASTERMODE_MSC, ES8328_MASTERMODE_MSC);
-
 	return 0;
 }
 
-- 
2.9.3

[PATCH v6 2/3] ASoC: rockchip: Add machine driver for RK3288 boards that use analog/HDMI

[Romain Perier]

The driver is used for Rockchip rk3288-based boards using a configurable
analog output (can be an headphone) and the built-in HDMI audio output
that is part of the RK3288 SoCs and use the Alsa HDMI codec driver. For
some rk3288-based boards the analog output and the hdmi audio are plugged
on the same i2s line, so we have to do the same in the driver by using a
DAI link CPU to multicodecs. This configuration can be found for example
on the Radxa Rock2 or the Firefly-RK3288.

This commit is based on the initial work that was done by Sjoerd Simons
<sjoerd.simons@collabora.com> with some improvements.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
---

Changes in v6:
- Fixed bad error handling for gpios in the probe function
- Replaced 'codec clock' by 'cpu clock' for set_sysclk for cpu_dai
Changes in v5:
- Fixed error handling for gpios in the probe function
Changes in v4:
- Added support for multi codecs in the asoc machine driver, so the driver
  matches the hw architecture (analog and hdmi audio are connected on
  the same i2s line)
- Renamed the driver to rk3288-hdmi-analog.c
- Changed some variables names due to this renaming
- Changed the documentation
- Added built-in support for hdmi audio in this driver
- Added support for the property 'rockchip,routing'

Changes in v3:
- Cosmetic changes
- Added missing email to MODULE_AUTHOR
Changes in v2:
- Fixed wrong dependencies for SND_SOC_ROCKCHIP_ES8388, SND_SOC_ROCKCHIP_I2S
  was selected with unmet direct dependencies

 .../bindings/sound/rockchip,rk3288-hdmi-analog.txt |  36 +++
 sound/soc/rockchip/Kconfig                         |  10 +
 sound/soc/rockchip/Makefile                        |   2 +
 sound/soc/rockchip/rk3288_hdmi_analog.c            | 299 +++++++++++++++++++++
 4 files changed, 347 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt
 create mode 100644 sound/soc/rockchip/rk3288_hdmi_analog.c

diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt
new file mode 100644
index 0000000..2539e1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt
@@ -0,0 +1,36 @@
+ROCKCHIP RK3288 with HDMI and analog audio
+
+Required properties:
+- compatible: "rockchip,rk3288-hdmi-analog"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+  connected to the CODEC
+- rockchip,audio-codec: The phandle of the analog audio codec.
+- rockchip,routing: A list of the connections between audio components.
+		    Each entry is a pair of strings, the first being the
+		    connection's sink, the second being the connection's
+		    source. For this driver the first string should always be
+		    "Analog".
+
+Optionnal properties:
+- rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the
+  headphone (when the analog output is an headphone).
+- rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone
+  (when the analog output is an headphone).
+- pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+
+sound {
+	compatible = "rockchip,rockchip-audio-es8388";
+	rockchip,model = "Analog audio output";
+	rockchip,i2s-controller = <&i2s>;
+	rockchip,audio-codec = <&es8388>;
+	rockchip,routing = "Analog", "LOUT2",
+			   "Analog", "ROUT2";
+	rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+	rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&headphone>;
+};
+
diff --git a/sound/soc/rockchip/Kconfig b/sound/soc/rockchip/Kconfig
index c783f9a..fc61f93 100644
--- a/sound/soc/rockchip/Kconfig
+++ b/sound/soc/rockchip/Kconfig
@@ -42,6 +42,16 @@ config SND_SOC_ROCKCHIP_RT5645
 	  Say Y or M here if you want to add support for SoC audio on Rockchip
 	  boards using the RT5645/RT5650 codec, such as Veyron.
 
+config SND_SOC_RK3288_HDMI_ANALOG
+	tristate "ASoC support multiple codecs for Rockchip RK3288 boards"
+	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP
+	select SND_SOC_ROCKCHIP_I2S
+	select SND_SOC_ES8328_I2C
+	select SND_SOC_HDMI_CODEC
+	help
+	  Say Y or M here if you want to add support for SoC audio on Rockchip
+	  RK3288 boards using an analog output and the built-in HDMI audio.
+
 config SND_SOC_RK3399_GRU_SOUND
 	tristate "ASoC support multiple codecs for Rockchip RK3399 GRU boards"
 	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP && SPI
diff --git a/sound/soc/rockchip/Makefile b/sound/soc/rockchip/Makefile
index 84e5c7c..991f91b 100644
--- a/sound/soc/rockchip/Makefile
+++ b/sound/soc/rockchip/Makefile
@@ -7,8 +7,10 @@ obj-$(CONFIG_SND_SOC_ROCKCHIP_SPDIF) += snd-soc-rockchip-spdif.o
 
 snd-soc-rockchip-max98090-objs := rockchip_max98090.o
 snd-soc-rockchip-rt5645-objs := rockchip_rt5645.o
+snd-soc-rk3288-hdmi-analog-objs := rk3288_hdmi_analog.o
 snd-soc-rk3399-gru-sound-objs := rk3399_gru_sound.o
 
 obj-$(CONFIG_SND_SOC_ROCKCHIP_MAX98090) += snd-soc-rockchip-max98090.o
 obj-$(CONFIG_SND_SOC_ROCKCHIP_RT5645) += snd-soc-rockchip-rt5645.o
+obj-$(CONFIG_SND_SOC_RK3288_HDMI_ANALOG) += snd-soc-rk3288-hdmi-analog.o
 obj-$(CONFIG_SND_SOC_RK3399_GRU_SOUND) += snd-soc-rk3399-gru-sound.o
diff --git a/sound/soc/rockchip/rk3288_hdmi_analog.c b/sound/soc/rockchip/rk3288_hdmi_analog.c
new file mode 100644
index 0000000..b60abf3
--- /dev/null
+++ b/sound/soc/rockchip/rk3288_hdmi_analog.c
@@ -0,0 +1,299 @@
+/*
+ * Rockchip machine ASoC driver for RK3288 boards that have an HDMI and analog
+ * audio output
+ *
+ * Copyright (c) 2016, Collabora Ltd.
+ *
+ * Authors: Sjoerd Simons <sjoerd.simons@collabora.com>,
+ *	    Romain Perier <romain.perier@collabora.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "rockchip_i2s.h"
+
+#define DRV_NAME "rk3288-snd-hdmi-analog"
+
+struct rk_drvdata {
+	int gpio_hp_en;
+	int gpio_hp_det;
+};
+
+static int rk_hp_power(struct snd_soc_dapm_widget *w,
+		       struct snd_kcontrol *k, int event)
+{
+	struct rk_drvdata *machine = snd_soc_card_get_drvdata(w->dapm->card);
+
+	if (!gpio_is_valid(machine->gpio_hp_en))
+		return 0;
+
+	gpio_set_value_cansleep(machine->gpio_hp_en,
+				SND_SOC_DAPM_EVENT_ON(event));
+
+	return 0;
+}
+
+static struct snd_soc_jack headphone_jack;
+static struct snd_soc_jack_pin headphone_jack_pins[] = {
+	{
+		.pin = "Analog",
+		.mask = SND_JACK_HEADPHONE
+	},
+};
+
+static const struct snd_soc_dapm_widget rk_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Analog", rk_hp_power),
+	SND_SOC_DAPM_LINE("HDMI", NULL),
+};
+
+static const struct snd_kcontrol_new rk_mc_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Analog"),
+	SOC_DAPM_PIN_SWITCH("HDMI"),
+};
+
+static int rk_hw_params(struct snd_pcm_substream *substream,
+			struct snd_pcm_hw_params *params)
+{
+	int ret = 0;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int mclk;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 24000:
+	case 32000:
+	case 48000:
+	case 64000:
+	case 96000:
+		mclk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+	case 88200:
+		mclk = 11289600;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, 0, mclk,
+				     SND_SOC_CLOCK_OUT);
+
+	if (ret && ret != -ENOTSUPP) {
+		dev_err(codec_dai->dev, "Can't set cpu clock %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk,
+				     SND_SOC_CLOCK_IN);
+	if (ret && ret != -ENOTSUPP) {
+		dev_err(codec_dai->dev, "Can't set codec clock %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_jack_gpio rk_hp_jack_gpio = {
+	.name = "Headphone detection",
+	.report = SND_JACK_HEADPHONE,
+	.debounce_time = 150
+};
+
+static int rk_init(struct snd_soc_pcm_runtime *runtime)
+{
+	struct rk_drvdata *machine = snd_soc_card_get_drvdata(runtime->card);
+
+	/* Enable Headset Jack detection */
+	if (gpio_is_valid(machine->gpio_hp_det)) {
+		snd_soc_card_jack_new(runtime->card, "Headphone Jack",
+				      SND_JACK_HEADPHONE, &headphone_jack,
+				      headphone_jack_pins,
+				      ARRAY_SIZE(headphone_jack_pins));
+		rk_hp_jack_gpio.gpio = machine->gpio_hp_det;
+		snd_soc_jack_add_gpios(&headphone_jack, 1, &rk_hp_jack_gpio);
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops rk_ops = {
+	.hw_params = rk_hw_params,
+};
+
+static struct snd_soc_dai_link_component rk_codecs[] = {
+	{ },
+	{
+		.name = "hdmi-audio-codec.2.auto",
+		.dai_name = "hdmi-hifi.0",
+	},
+};
+
+static struct snd_soc_dai_link rk_dailink = {
+	.name = "Codecs",
+	.stream_name = "Audio",
+	.init = rk_init,
+	.ops = &rk_ops,
+	.codecs = rk_codecs,
+	.num_codecs = ARRAY_SIZE(rk_codecs),
+	/* Set codecs as slave */
+	.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBS_CFS,
+};
+
+static struct snd_soc_card snd_soc_card_rk = {
+	.name = "ROCKCHIP-I2S",
+	.dai_link = &rk_dailink,
+	.num_links = 1,
+	.num_aux_devs = 0,
+	.dapm_widgets = rk_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(rk_dapm_widgets),
+	.controls = rk_mc_controls,
+	.num_controls = ARRAY_SIZE(rk_mc_controls),
+};
+
+static int snd_rk_mc_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct snd_soc_card *card = &snd_soc_card_rk;
+	struct device_node *np = pdev->dev.of_node;
+	struct rk_drvdata *machine;
+	struct of_phandle_args args;
+
+	machine = devm_kzalloc(&pdev->dev, sizeof(struct rk_drvdata),
+			       GFP_KERNEL);
+	if (!machine)
+		return -ENOMEM;
+
+	card->dev = &pdev->dev;
+
+	machine->gpio_hp_det = of_get_named_gpio(np,
+		"rockchip,hp-det-gpios", 0);
+	if (!gpio_is_valid(machine->gpio_hp_det) && machine->gpio_hp_det != -ENODEV)
+		return machine->gpio_hp_det;
+
+	machine->gpio_hp_en = of_get_named_gpio(np,
+		"rockchip,hp-en-gpios", 0);
+	if (!gpio_is_valid(machine->gpio_hp_en) && machine->gpio_hp_en != -ENODEV)
+		return machine->gpio_hp_en;
+
+	if (gpio_is_valid(machine->gpio_hp_en)) {
+		ret = devm_gpio_request_one(&pdev->dev, machine->gpio_hp_en,
+					    GPIOF_OUT_INIT_LOW, "hp_en");
+		if (ret) {
+			dev_err(card->dev, "cannot get hp_en gpio\n");
+			return ret;
+		}
+	}
+
+	ret = snd_soc_of_parse_card_name(card, "rockchip,model");
+	if (ret) {
+		dev_err(card->dev, "SoC parse card name failed %d\n", ret);
+		return ret;
+	}
+
+	rk_dailink.codecs[0].of_node = of_parse_phandle(np,
+							"rockchip,audio-codec",
+							0);
+	if (!rk_dailink.codecs[0].of_node) {
+		dev_err(&pdev->dev,
+			"Property 'rockchip,audio-codec' missing or invalid\n");
+		return -EINVAL;
+	}
+	ret = of_parse_phandle_with_fixed_args(np, "rockchip,audio-codec",
+					       0, 0, &args);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Unable to parse property 'rockchip,audio-codec'\n");
+		return ret;
+	}
+
+	ret = snd_soc_get_dai_name(&args, &rk_dailink.codecs[0].dai_name);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to get codec_dai_name\n");
+		return ret;
+	}
+
+	rk_dailink.cpu_of_node = of_parse_phandle(np, "rockchip,i2s-controller",
+						  0);
+	if (!rk_dailink.cpu_of_node) {
+		dev_err(&pdev->dev,
+			"Property 'rockchip,i2s-controller' missing or invalid\n");
+		return -EINVAL;
+	}
+
+	rk_dailink.platform_of_node = rk_dailink.cpu_of_node;
+
+	ret = snd_soc_of_parse_audio_routing(card, "rockchip,routing");
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Unable to parse 'rockchip,routing' property\n");
+		return ret;
+	}
+
+	snd_soc_card_set_drvdata(card, machine);
+
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
+	if (ret == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Soc register card failed %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, card);
+
+	return ret;
+}
+
+static const struct of_device_id rockchip_sound_of_match[] = {
+	{ .compatible = "rockchip,rk3288-hdmi-analog", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_sound_of_match);
+
+static struct platform_driver rockchip_sound_driver = {
+	.probe = snd_rk_mc_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.pm = &snd_soc_pm_ops,
+		.of_match_table = rockchip_sound_of_match,
+	},
+};
+
+module_platform_driver(rockchip_sound_driver);
+
+MODULE_AUTHOR("Sjoerd Simons <sjoerd.simons@collabora.com>");
+MODULE_DESCRIPTION("Rockchip RK3288 machine ASoC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
-- 
2.9.3

[PATCH v6 3/3] arm: dts: Add support for ES8388 to the Radxa Rock 2

[Romain Perier]

This commit adds the DT definition of the es8388 i2c device
found at address 0x10. It also adds the definition for connecting
the Rockchip I2S to the es8388 analog output.

This commit is based on the initial work that was done by Sjoerd Simons
<sjoerd.simons@collabora.com> with some improvements.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
---

Changes in v6: None
Changes in v5: None
Changes in v4:
 - Updated to the new DT binding
 - Added the property 'rockchip,routing'
 - Renamed the node sound_es8388 to sound_i2s
Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/rk3288-rock2-square.dts | 39 +++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index dd3ad2e..6b176b8 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -86,6 +86,19 @@
 		#sound-dai-cells = <0>;
 	};
 
+	sound_i2s {
+		compatible = "rockchip,rk3288-hdmi-analog";
+		rockchip,model = "I2S";
+		rockchip,i2s-controller = <&i2s>;
+		rockchip,audio-codec = <&es8388>;
+		rockchip,routing = "Analog", "LOUT2",
+				   "Analog", "ROUT2";
+		rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+		rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&headphone>;
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&hym8563>;
@@ -173,10 +186,29 @@
 	};
 };
 
+&i2c2 {
+	status = "okay";
+
+	es8388: es8388@10 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x10>;
+		AVDD-supply = <&vcca_codec>;
+		DVDD-supply = <&vcca_codec>;
+		HPVDD-supply = <&vcca_codec>;
+		PVDD-supply = <&vcca_codec>;
+		clocks = <&cru SCLK_I2S0_OUT>;
+		clock-names = "i2s_clk_out";
+	};
+};
+
 &i2c5 {
 	status = "okay";
 };
 
+&i2s {
+	status = "okay";
+};
+
 &pinctrl {
 	ir {
 		ir_int: ir-int {
@@ -190,6 +222,13 @@
 		};
 	};
 
+	sound {
+		headphone: headphone {
+			rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
-- 
2.9.3

Re: [PATCH v6 3/3] arm: dts: Add support for ES8388 to the Radxa Rock 2

[Heiko Stuebner]

Hi Romain,

Am Donnerstag, 26. Januar 2017, 14:23:15 CET schrieb Romain Perier:
> This commit adds the DT definition of the es8388 i2c device
> found at address 0x10. It also adds the definition for connecting
> the Rockchip I2S to the es8388 analog output.
> 
> This commit is based on the initial work that was done by Sjoerd Simons
> <sjoerd.simons@collabora.com> with some improvements.
> 
> Signed-off-by: Romain Perier <romain.perier@collabora.com>
> ---
> 
> Changes in v6: None
> Changes in v5: None
> Changes in v4:
>  - Updated to the new DT binding
>  - Added the property 'rockchip,routing'
>  - Renamed the node sound_es8388 to sound_i2s
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/boot/dts/rk3288-rock2-square.dts | 39
> +++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts
> b/arch/arm/boot/dts/rk3288-rock2-square.dts index dd3ad2e..6b176b8 100644
> --- a/arch/arm/boot/dts/rk3288-rock2-square.dts
> +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
> @@ -86,6 +86,19 @@
>  		#sound-dai-cells = <0>;
>  	};
> 
> +	sound_i2s {
> +		compatible = "rockchip,rk3288-hdmi-analog";
> +		rockchip,model = "I2S";

Are you sure "I2S" is not to generic? Don't know enough about sound, but 
remember this somehow matching against possible alsa ucm profiles.

So this could maybe produce conflicts with such a generic name?


> +		rockchip,i2s-controller = <&i2s>;
> +		rockchip,audio-codec = <&es8388>;
> +		rockchip,routing = "Analog", "LOUT2",
> +				   "Analog", "ROUT2";
> +		rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
> +		rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&headphone>;
> +	};
> +
>  	sdio_pwrseq: sdio-pwrseq {
>  		compatible = "mmc-pwrseq-simple";
>  		clocks = <&hym8563>;
> @@ -173,10 +186,29 @@
>  	};
>  };
> 
> +&i2c2 {
> +	status = "okay";
> +
> +	es8388: es8388@10 {
> +		compatible = "everest,es8388", "everest,es8328";
> +		reg = <0x10>;
> +		AVDD-supply = <&vcca_codec>;
> +		DVDD-supply = <&vcca_codec>;

According to the schematics I have, this comes from
	vccio_codec
and thus from vcc_io

So please give the regulator node simply a second phandle, like
	vcc_io: vccio_codec: REG2 {

and reference the correct regulator here.
See DCDC_REG4 in rk3288-veyron.dtsi for reference.


> +		HPVDD-supply = <&vcca_codec>;
> +		PVDD-supply = <&vcca_codec>;

vccio_codec as well


> +		clocks = <&cru SCLK_I2S0_OUT>;
> +		clock-names = "i2s_clk_out";
> +	};
> +};
> +
>  &i2c5 {
>  	status = "okay";
>  };
> 
> +&i2s {
> +	status = "okay";
> +};
> +
>  &pinctrl {
>  	ir {
>  		ir_int: ir-int {
> @@ -190,6 +222,13 @@
>  		};
>  	};
> 
> +	sound {
> +		headphone: headphone {
> +			rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<7 7 RK_FUNC_GPIO &pcfg_pull_none>;

please use real pin names from schematics fro pinctrl entries when they are 
known. This makes greping for things easier.

So please two separate definitions, "hp_det" and "phone_ctl".


Heiko

Re: [PATCH v6 3/3] arm: dts: Add support for ES8388 to the Radxa Rock 2

[Romain Perier]

Hi Heiko,

Le 31/01/2017 à 14:23, Heiko Stuebner a écrit :
> Hi Romain,
>
> Am Donnerstag, 26. Januar 2017, 14:23:15 CET schrieb Romain Perier:
>> This commit adds the DT definition of the es8388 i2c device
>> found at address 0x10. It also adds the definition for connecting
>> the Rockchip I2S to the es8388 analog output.
>>
>> This commit is based on the initial work that was done by Sjoerd Simons
>> <sjoerd.simons@collabora.com> with some improvements.
>>
>> Signed-off-by: Romain Perier <romain.perier@collabora.com>
>> ---
>>
>> Changes in v6: None
>> Changes in v5: None
>> Changes in v4:
>>  - Updated to the new DT binding
>>  - Added the property 'rockchip,routing'
>>  - Renamed the node sound_es8388 to sound_i2s
>> Changes in v3: None
>> Changes in v2: None
>>
>>  arch/arm/boot/dts/rk3288-rock2-square.dts | 39
>> +++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts
>> b/arch/arm/boot/dts/rk3288-rock2-square.dts index dd3ad2e..6b176b8 100644
>> --- a/arch/arm/boot/dts/rk3288-rock2-square.dts
>> +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
>> @@ -86,6 +86,19 @@
>>  		#sound-dai-cells = <0>;
>>  	};
>>
>> +	sound_i2s {
>> +		compatible = "rockchip,rk3288-hdmi-analog";
>> +		rockchip,model = "I2S";
> Are you sure "I2S" is not to generic? Don't know enough about sound, but 
> remember this somehow matching against possible alsa ucm profiles.
>
> So this could maybe produce conflicts with such a generic name?

>From what I understood this is the name of the card that will be shown
by Alsa, including these displayed by aplay -L . The problem is this
driver will connect a cpu dai to multicodecs, one of these is an analog
output while the other one is a digital output... I am not sure that we
can really expose a different name.


>
>
>> +		rockchip,i2s-controller = <&i2s>;
>> +		rockchip,audio-codec = <&es8388>;
>> +		rockchip,routing = "Analog", "LOUT2",
>> +				   "Analog", "ROUT2";
>> +		rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
>> +		rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&headphone>;
>> +	};
>> +
>>  	sdio_pwrseq: sdio-pwrseq {
>>  		compatible = "mmc-pwrseq-simple";
>>  		clocks = <&hym8563>;
>> @@ -173,10 +186,29 @@
>>  	};
>>  };
>>
>> +&i2c2 {
>> +	status = "okay";
>> +
>> +	es8388: es8388@10 {
>> +		compatible = "everest,es8388", "everest,es8328";
>> +		reg = <0x10>;
>> +		AVDD-supply = <&vcca_codec>;
>> +		DVDD-supply = <&vcca_codec>;
> According to the schematics I have, this comes from
> 	vccio_codec
> and thus from vcc_io
>
> So please give the regulator node simply a second phandle, like
> 	vcc_io: vccio_codec: REG2 {

Ok.

>
> and reference the correct regulator here.
> See DCDC_REG4 in rk3288-veyron.dtsi for reference.
>
>
>> +		HPVDD-supply = <&vcca_codec>;
>> +		PVDD-supply = <&vcca_codec>;
> vccio_codec as well

OK

>
>
>> +		clocks = <&cru SCLK_I2S0_OUT>;
>> +		clock-names = "i2s_clk_out";
>> +	};
>> +};
>> +
>>  &i2c5 {
>>  	status = "okay";
>>  };
>>
>> +&i2s {
>> +	status = "okay";
>> +};
>> +
>>  &pinctrl {
>>  	ir {
>>  		ir_int: ir-int {
>> @@ -190,6 +222,13 @@
>>  		};
>>  	};
>>
>> +	sound {
>> +		headphone: headphone {
>> +			rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>,
>> +					<7 7 RK_FUNC_GPIO &pcfg_pull_none>;
> please use real pin names from schematics fro pinctrl entries when they are 
> known. This makes greping for things easier.
>
> So please two separate definitions, "hp_det" and "phone_ctl".

Ok, I will change that.

Thanks,
Romain