[PATCH 3/6] drm/amdgpu: add a compute pipe reset for RS64

[PATCH 3/6] drm/amdgpu: add a compute pipe reset for RS64

[Horace Chen]

[Why]
Under SR-IOV, we are not sure whether pipe status is
good or not when doing initialization. The compute engine
maybe fail to bringup if pipe status is bad.

[How]
Do an RS64 pipe reset for MEC before we do initialization.
Also apply to bare-metal.

Signed-off-by: Horace Chen <horace.chen@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
index 0d8193b30fc5..75556370028e 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
@@ -2754,6 +2754,21 @@ static void gfx_v11_0_config_gfx_rs64(struct amdgpu_device *adev)
 					mec_hdr->ucode_start_addr_hi >> 2);
 	}
 	soc21_grbm_select(adev, 0, 0, 0, 0);
+
+	/* reset mec pipe */
+	tmp = RREG32_SOC15(GC, 0, regCP_MEC_RS64_CNTL);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE0_RESET, 1);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE1_RESET, 1);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE2_RESET, 1);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE3_RESET, 1);
+	WREG32_SOC15(GC, 0, regCP_MEC_RS64_CNTL, tmp);
+
+	/* clear mec pipe reset */
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE0_RESET, 0);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE1_RESET, 0);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE2_RESET, 0);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE3_RESET, 0);
+	WREG32_SOC15(GC, 0, regCP_MEC_RS64_CNTL, tmp);
 }
 
 static int gfx_v11_0_wait_for_rlc_autoload_complete(struct amdgpu_device *adev)
-- 
2.25.1