ath10k.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org
Subject: [RFC PATCH 10/15] pwrseq: add support for QCA BT+WiFi power sequencer
Date: Tue, 17 Aug 2021 03:55:02 +0300	[thread overview]
Message-ID: <20210817005507.1507580-11-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210817005507.1507580-1-dmitry.baryshkov@linaro.org>

Add support for power sequencer used in the Qualcomm BT+WiFi SoCs. They
require several external volate regulators and some of them use separate
BT and WiFi enable GPIO pins. This code is mostly extracted from the
hci_qca.c bluetooth driver and ath10k WiFi driver. Instead of having
each of them manage pins, different requirements, regulator types, move
this knowledge to the common power sequencer driver. Currently original
drivers are not stripped from the regulator code, this will be done
later (to keep compatibility with the old device trees).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/power/pwrseq/Kconfig      |  14 ++
 drivers/power/pwrseq/Makefile     |   1 +
 drivers/power/pwrseq/pwrseq_qca.c | 290 ++++++++++++++++++++++++++++++
 3 files changed, 305 insertions(+)
 create mode 100644 drivers/power/pwrseq/pwrseq_qca.c

diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index 36339a456b03..990c3164144e 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -19,6 +19,20 @@ config PWRSEQ_EMMC
 	  This driver can also be built as a module. If so, the module
 	  will be called pwrseq_emmc.
 
+config PWRSEQ_QCA
+	tristate "Power Sequencer for Qualcomm WiFi + BT SoCs"
+	depends on OF
+	help
+	  If you say yes to this option, support will be included for Qualcomm
+	  WCN399x,QCA639x,QCA67xx families of hybrid WiFi and Bluetooth SoCs.
+	  Note, this driver supports only power control for these SoC, you
+	  still have to enable individual Bluetooth and WiFi drivers. This
+	  driver is only necessary on ARM platforms with these chips. PCIe
+	  cards handle power sequencing on their own.
+
+	  Say M here if you want to include support for Qualcomm WiFi+BT SoCs
+	  as a module. This will build a module called "pwrseq_qca".
+
 config PWRSEQ_SD8787
 	tristate "HW reset support for SD8787 BT + Wifi module"
 	depends on OF
diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile
index 6f359d228843..556bf5582d47 100644
--- a/drivers/power/pwrseq/Makefile
+++ b/drivers/power/pwrseq/Makefile
@@ -6,5 +6,6 @@
 obj-$(CONFIG_PWRSEQ) += core.o
 
 obj-$(CONFIG_PWRSEQ_EMMC)	+= pwrseq_emmc.o
+obj-$(CONFIG_PWRSEQ_QCA)	+= pwrseq_qca.o
 obj-$(CONFIG_PWRSEQ_SD8787)	+= pwrseq_sd8787.o
 obj-$(CONFIG_PWRSEQ_SIMPLE)	+= pwrseq_simple.o
diff --git a/drivers/power/pwrseq/pwrseq_qca.c b/drivers/power/pwrseq/pwrseq_qca.c
new file mode 100644
index 000000000000..3421a4821126
--- /dev/null
+++ b/drivers/power/pwrseq/pwrseq_qca.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ *
+ * Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ *
+ * Power Sequencer for Qualcomm WiFi + BT SoCs
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pwrseq/driver.h>
+#include <linux/regulator/consumer.h>
+
+/*
+ * Voltage regulator information required for configuring the
+ * QCA WiFi+Bluetooth chipset
+ */
+struct qca_vreg {
+	const char *name;
+	unsigned int load_uA;
+};
+
+struct qca_device_data {
+	struct qca_vreg vddio;
+	struct qca_vreg *vregs;
+	size_t num_vregs;
+	bool has_bt_en;
+	bool has_wifi_en;
+};
+
+struct pwrseq_qca;
+struct pwrseq_qca_one {
+	struct pwrseq_qca *common;
+	struct gpio_desc *enable;
+};
+
+#define PWRSEQ_QCA_WIFI 0
+#define PWRSEQ_QCA_BT 1
+
+#define PWRSEQ_QCA_MAX 2
+
+struct pwrseq_qca {
+	struct regulator *vddio;
+	struct gpio_desc *sw_ctrl;
+	struct pwrseq_qca_one pwrseq_qcas[PWRSEQ_QCA_MAX];
+	int num_vregs;
+	struct regulator_bulk_data vregs[];
+};
+
+static int pwrseq_qca_power_on(struct pwrseq *pwrseq)
+{
+	struct pwrseq_qca_one *qca_one = pwrseq_get_data(pwrseq);
+	int ret;
+
+	if (qca_one->common->vddio) {
+		ret = regulator_enable(qca_one->common->vddio);
+		if (ret)
+			return ret;
+	}
+
+	ret = regulator_bulk_enable(qca_one->common->num_vregs, qca_one->common->vregs);
+	if (ret)
+		goto vddio_off;
+
+	if (qca_one->enable) {
+		gpiod_set_value_cansleep(qca_one->enable, 0);
+		msleep(50);
+		gpiod_set_value_cansleep(qca_one->enable, 1);
+		msleep(150);
+	}
+
+	if (qca_one->common->sw_ctrl) {
+		bool sw_ctrl_state = gpiod_get_value_cansleep(qca_one->common->sw_ctrl);
+		dev_dbg(&pwrseq->dev, "SW_CTRL is %d", sw_ctrl_state);
+	}
+
+	return 0;
+
+vddio_off:
+	regulator_disable(qca_one->common->vddio);
+
+	return ret;
+}
+
+static void pwrseq_qca_power_off(struct pwrseq *pwrseq)
+{
+	struct pwrseq_qca_one *qca_one = pwrseq_get_data(pwrseq);
+
+	if (qca_one->enable) {
+		gpiod_set_value_cansleep(qca_one->enable, 0);
+		msleep(50);
+	}
+
+	regulator_bulk_disable(qca_one->common->num_vregs, qca_one->common->vregs);
+	regulator_disable(qca_one->common->vddio);
+
+	if (qca_one->common->sw_ctrl) {
+		bool sw_ctrl_state = gpiod_get_value_cansleep(qca_one->common->sw_ctrl);
+		dev_dbg(&pwrseq->dev, "SW_CTRL is %d", sw_ctrl_state);
+	}
+}
+
+static const struct pwrseq_ops pwrseq_qca_ops = {
+	.power_on = pwrseq_qca_power_on,
+	.power_off = pwrseq_qca_power_off,
+};
+
+static int pwrseq_qca_regulators_init(struct device *dev, struct pwrseq_qca *pwrseq_qca,
+		const struct qca_device_data *data)
+{
+	int ret, i;
+
+	pwrseq_qca->vddio = devm_regulator_get(dev, data->vddio.name);
+	if (IS_ERR(pwrseq_qca->vddio))
+		return PTR_ERR(pwrseq_qca->vddio);
+
+	ret = regulator_set_load(pwrseq_qca->vddio, data->vddio.load_uA);
+	if (ret)
+		return ret;
+
+	pwrseq_qca->num_vregs = data->num_vregs;
+
+	for (i = 0; i < pwrseq_qca->num_vregs; i++)
+		pwrseq_qca->vregs[i].supply = data->vregs[i].name;
+
+	ret = devm_regulator_bulk_get(dev, pwrseq_qca->num_vregs, pwrseq_qca->vregs);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < pwrseq_qca->num_vregs; i++) {
+		if (!data->vregs[i].load_uA)
+			continue;
+
+		ret = regulator_set_load(pwrseq_qca->vregs[i].consumer, data->vregs[i].load_uA);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int pwrseq_qca_probe(struct platform_device *pdev)
+{
+	struct pwrseq_qca *pwrseq_qca;
+	struct pwrseq *pwrseq;
+	struct pwrseq_provider *provider;
+	struct device *dev = &pdev->dev;
+	struct pwrseq_onecell_data *onecell;
+	const struct qca_device_data *data;
+	int ret, i;
+
+	data = device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	pwrseq_qca = devm_kzalloc(dev, struct_size(pwrseq_qca, vregs, data->num_vregs), GFP_KERNEL);
+	if (!pwrseq_qca)
+		return -ENOMEM;
+
+	onecell = devm_kzalloc(dev, struct_size(onecell, pwrseqs, PWRSEQ_QCA_MAX), GFP_KERNEL);
+	if (!onecell)
+		return -ENOMEM;
+
+	ret = pwrseq_qca_regulators_init(dev, pwrseq_qca, data);
+	if (ret)
+		return ret;
+
+	if (data->has_wifi_en) {
+		pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable = devm_gpiod_get(dev, "wifi-enable", GPIOD_OUT_LOW);
+		if (IS_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable)) {
+			return dev_err_probe(dev, PTR_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable),
+					"failed to acquire WIFI enable GPIO\n");
+		}
+	}
+
+	if (data->has_bt_en) {
+		pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable = devm_gpiod_get(dev, "bt-enable", GPIOD_OUT_LOW);
+		if (IS_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable)) {
+			return dev_err_probe(dev, PTR_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable),
+					"failed to acquire BT enable GPIO\n");
+		}
+	}
+
+	pwrseq_qca->sw_ctrl = devm_gpiod_get_optional(dev, "swctrl", GPIOD_IN);
+	if (IS_ERR(pwrseq_qca->sw_ctrl)) {
+		return dev_err_probe(dev, PTR_ERR(pwrseq_qca->sw_ctrl),
+				"failed to acquire SW_CTRL gpio\n");
+	} else if (!pwrseq_qca->sw_ctrl)
+		dev_info(dev, "No SW_CTRL gpio\n");
+
+	for (i = 0; i < PWRSEQ_QCA_MAX; i++) {
+		pwrseq_qca->pwrseq_qcas[i].common = pwrseq_qca;
+
+		pwrseq = devm_pwrseq_create(dev, &pwrseq_qca_ops, &pwrseq_qca->pwrseq_qcas[i]);
+		if (IS_ERR(pwrseq))
+			return PTR_ERR(pwrseq);
+
+		onecell->pwrseqs[i] = pwrseq;
+	}
+
+	onecell->num = PWRSEQ_QCA_MAX;
+
+	provider = devm_of_pwrseq_provider_register(dev, of_pwrseq_xlate_onecell, onecell);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct qca_device_data qca_soc_data_qca6390 = {
+	.vddio = { "vddio", 20000 },
+	.vregs = (struct qca_vreg []) {
+		/* 2.0 V */
+		{ "vddpcie2", 15000 },
+		{ "vddrfa3", 400000 },
+
+		/* 0.95 V */
+		{ "vddaon", 100000 },
+		{ "vddpmu", 1250000 },
+		{ "vddrfa1", 200000 },
+
+		/* 1.35 V */
+		{ "vddrfa2", 400000 },
+		{ "vddpcie1", 35000 },
+	},
+	.num_vregs = 7,
+	.has_bt_en = true,
+	.has_wifi_en = true,
+};
+
+/* Shared between wcn3990 and wcn3991 */
+static const struct qca_device_data qca_soc_data_wcn3990 = {
+	.vddio = { "vddio", 15000 },
+	.vregs = (struct qca_vreg []) {
+		{ "vddxo", 80000  },
+		{ "vddrfa", 300000 },
+		{ "vddch0", 450000 },
+		{ "vddch1", 450000 },
+	},
+	.num_vregs = 4,
+};
+
+static const struct qca_device_data qca_soc_data_wcn3998 = {
+	.vddio = { "vddio", 10000 },
+	.vregs = (struct qca_vreg []) {
+		{ "vddxo", 80000  },
+		{ "vddrfa", 300000 },
+		{ "vddch0", 450000 },
+		{ "vddch1", 450000 },
+	},
+	.num_vregs = 4,
+};
+
+static const struct qca_device_data qca_soc_data_wcn6750 = {
+	.vddio = { "vddio", 5000 },
+	.vregs = (struct qca_vreg []) {
+		{ "vddaon", 26000 },
+		{ "vddbtcxmx", 126000 },
+		{ "vddrfacmn", 12500 },
+		{ "vddrfa0p8", 102000 },
+		{ "vddrfa1p7", 302000 },
+		{ "vddrfa1p2", 257000 },
+		{ "vddrfa2p2", 1700000 },
+		{ "vddasd", 200 },
+	},
+	.num_vregs = 8,
+	.has_bt_en = true,
+	.has_wifi_en = true,
+};
+
+static const struct of_device_id pwrseq_qca_of_match[] = {
+	{ .compatible = "qcom,qca6390-pwrseq", .data = &qca_soc_data_qca6390 },
+	{ .compatible = "qcom,wcn3990-pwrseq", .data = &qca_soc_data_wcn3990 },
+	{ .compatible = "qcom,wcn3991-pwrseq", .data = &qca_soc_data_wcn3990 },
+	{ .compatible = "qcom,wcn3998-pwrseq", .data = &qca_soc_data_wcn3998 },
+	{ .compatible = "qcom,wcn6750-pwrseq", .data = &qca_soc_data_wcn6750 },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, pwrseq_qca_of_match);
+
+static struct platform_driver pwrseq_qca_driver = {
+	.probe = pwrseq_qca_probe,
+	.driver = {
+		.name = "pwrseq_qca",
+		.of_match_table = pwrseq_qca_of_match,
+	},
+};
+
+module_platform_driver(pwrseq_qca_driver);
+MODULE_LICENSE("GPL v2");
-- 
2.30.2


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2021-08-17  0:56 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-17  0:54 [RFC PATCH 00/15] create power sequencing subsystem Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 01/15] power: add power sequencer subsystem Dmitry Baryshkov
2021-08-19 23:37   ` Bjorn Andersson
2021-08-17  0:54 ` [RFC PATCH 02/15] pwrseq: port MMC's pwrseq drivers to new pwrseq subsystem Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 03/15] mmc: core: switch " Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 04/15] ath10k: add support for pwrseq sequencing Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 05/15] Bluetooth: hci_qca: merge qca_power into qca_serdev Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 06/15] Bluetooth: hci_qca: merge init paths Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 07/15] Bluetooth: hci_qca: merge qca_power_on with qca_regulators_init Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 08/15] Bluetooth: hci_qca: futher rework of power on/off handling Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 09/15] Bluetooth: hci_qca: add support for pwrseq Dmitry Baryshkov
2021-08-17  0:55 ` Dmitry Baryshkov [this message]
2021-08-19 23:18   ` [RFC PATCH 10/15] pwrseq: add support for QCA BT+WiFi power sequencer Bjorn Andersson
2021-08-20  8:10     ` Dmitry Baryshkov
2021-08-20 16:35       ` Bjorn Andersson
2021-08-17  0:55 ` [RFC PATCH 11/15] arm64: dts: qcom: sdm845-db845c: switch bt+wifi to qca " Dmitry Baryshkov
2021-08-19 23:40   ` Bjorn Andersson
2021-08-17  0:55 ` [RFC PATCH 12/15] arm64: dts: qcom: qrb5165-rb5: add bluetooth support Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 13/15] arm64: dts: qcom: sdm845-db845c: add second channel support to qca power sequencer Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 14/15] WIP: PCI: qcom: use pwrseq to power up bus devices Dmitry Baryshkov
2021-08-19 23:44   ` Bjorn Andersson
2021-08-20  8:50     ` Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 15/15] WIP: arm64: dts: qcom: qrb5165-rb5: add bus-pwrseq property to pcie0 Dmitry Baryshkov
2021-08-19 15:23 ` [RFC PATCH 00/15] create power sequencing subsystem Marcel Holtmann
2021-08-20 13:08   ` Dmitry Baryshkov
2021-08-20 17:02     ` Bjorn Andersson
2021-08-20 18:06       ` Dmitry Baryshkov
2021-08-21  6:50     ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210817005507.1507580-11-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=ath10k@lists.infradead.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=johan.hedberg@gmail.com \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=netdev@vger.kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).