* Re: ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 specific BDFs
[not found] ` <1182738771.2553046.1600182130121@mail.yahoo.com>
@ 2020-09-19 15:03 ` Christian Lamparter
2020-11-04 16:45 ` Kalle Valo
0 siblings, 1 reply; 3+ messages in thread
From: Christian Lamparter @ 2020-09-19 15:03 UTC (permalink / raw)
To: Hans Geiblinger, ath10k
Hello,
On 2020-09-15 17:02, Hans Geiblinger wrote:
> The support for this device is currently being added into OpenWrt. This AP requires
> two special BDFs to get the Wi-Fi PHYs working (correctly).
>
> * description for what hardware this is:
>
> - it is a IPQ4019 based board
> - one QCA40xx radio is used as 2.4GHz radio
> - one QCA40xx radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you
> downloaded)
>
> - boarddata files were taken from OEM LinksysFW_MR8300_1.1.7.201281_prod.img
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
> - QCA4019 hw1.0
>
> +bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc
> SHA256: 0A8E9DBBD12A87AEDACA743B21756014F80C91FB4D1AB7FF7D1E7F059398522B
> +bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc
> SHA256: A6DAF207C79BC6E0106ECD5231B5F127A36ED0A1AF5B324C5949CC07DA3CC925
Please use the md5sums: <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
(Initially the checksums were sha256, but the tools already had the md5sum integrated.
From what I know Kalle uses the checksum just to check that nothing got corrupted when
importing the mails)
> * attach the actual board file (board.bin)
>
> - All eight bin files have been included. For OpenWRT we will be using the "fcc" variant.
you might as well only post the fcc variants in that case.
> - The name of the files are equal to the id string in the board-2.bin
> (minus the ".bin")
Cheers,
Christian
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 specific BDFs
2020-09-19 15:03 ` ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 specific BDFs Christian Lamparter
@ 2020-11-04 16:45 ` Kalle Valo
0 siblings, 0 replies; 3+ messages in thread
From: Kalle Valo @ 2020-11-04 16:45 UTC (permalink / raw)
To: Christian Lamparter; +Cc: Hans Geiblinger, ath10k
Christian Lamparter <chunkeey@gmail.com> writes:
> Hello,
>
> On 2020-09-15 17:02, Hans Geiblinger wrote:
>> The support for this device is currently being added into OpenWrt. This AP requires
>> two special BDFs to get the Wi-Fi PHYs working (correctly).
>>
>> * description for what hardware this is:
>>
>> - it is a IPQ4019 based board
>> - one QCA40xx radio is used as 2.4GHz radio
>> - one QCA40xx radio is used as 5GHz radio
>>
>> * origin of the board file (did you create it yourself or where you
>> downloaded)
>>
>> - boarddata files were taken from OEM LinksysFW_MR8300_1.1.7.201281_prod.img
>>
>> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>>
>> - QCA4019 hw1.0
>>
>> +bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc
>> SHA256: 0A8E9DBBD12A87AEDACA743B21756014F80C91FB4D1AB7FF7D1E7F059398522B
>> +bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc
>> SHA256: A6DAF207C79BC6E0106ECD5231B5F127A36ED0A1AF5B324C5949CC07DA3CC925
> Please use the md5sums:
> <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
>
> (Initially the checksums were sha256, but the tools already had the
> md5sum integrated. From what I know Kalle uses the checksum just to
> check that nothing got corrupted when importing the mails)
Correct, the main purpose of the checksums is to avoid any corruption.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
* ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 specific BDFs
[not found] <797408493.2527611.1600182767989.ref@mail.yahoo.com>
@ 2020-09-15 15:12 ` Hans Geiblinger
0 siblings, 0 replies; 3+ messages in thread
From: Hans Geiblinger @ 2020-09-15 15:12 UTC (permalink / raw)
To: ath10k
[-- Attachment #1: Type: text/plain, Size: 1053 bytes --]
Hi,
The support for this device is currently being added into OpenWrt. This AP requires
two special BDFs to get the Wi-Fi PHYs working (correctly).
* description for what hardware this is:
- it is a IPQ4019 based board
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file
- boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img
* ids to be used with the board file
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc
SHA256: 0A8E9DBBD12A87AEDACA743B21756014F80C91FB4D1AB7FF7D1E7F059398522B
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc
SHA256: A6DAF207C79BC6E0106ECD5231B5F127A36ED0A1AF5B324C5949CC07DA3CC925
* attach the actual board file
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Hans
[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-11-04 16:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1182738771.2553046.1600182130121.ref@mail.yahoo.com>
[not found] ` <1182738771.2553046.1600182130121@mail.yahoo.com>
2020-09-19 15:03 ` ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 specific BDFs Christian Lamparter
2020-11-04 16:45 ` Kalle Valo
[not found] <797408493.2527611.1600182767989.ref@mail.yahoo.com>
2020-09-15 15:12 ` Hans Geiblinger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).