ath10k.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* Compex WLE600VX AP mode 5GHz doesn't work since kernel 5.6
@ 2020-04-12  9:10 svp
  2020-04-16 12:32 ` Kalle Valo
  0 siblings, 1 reply; 7+ messages in thread
From: svp @ 2020-04-12  9:10 UTC (permalink / raw)
  To: ath10k

Hi!
I need help with my softAP installation.
Compex WLE600VX miniPCIe card can't start at 5GHz AP mode after update to kernel 
5.6 on ArchLinux
With kernel 5.5.x and LTS all is OK
Some logs and details is in this ArchLinux forum topic 
https://bbs.archlinux.org/viewtopic.php?id=254535

 >lspci -k
06:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless 
Network Adapter
         Kernel driver in use: ath10k_pci
         Kernel modules: ath10k_pci

 >iw list | grep -A 15 Frequencies:
                 Frequencies:
                         * 2412 MHz [1] (20.0 dBm)
                         * 2417 MHz [2] (20.0 dBm)
                         * 2422 MHz [3] (20.0 dBm)
                         * 2427 MHz [4] (20.0 dBm)
                         * 2432 MHz [5] (20.0 dBm)
                         * 2437 MHz [6] (20.0 dBm)
                         * 2442 MHz [7] (20.0 dBm)
                         * 2447 MHz [8] (20.0 dBm)
                         * 2452 MHz [9] (20.0 dBm)
                         * 2457 MHz [10] (20.0 dBm)
                         * 2462 MHz [11] (20.0 dBm)
                         * 2467 MHz [12] (disabled)
                         * 2472 MHz [13] (disabled)
                         * 2484 MHz [14] (disabled)
         Band 2:
--
                 Frequencies:
                         * 5180 MHz [36] (20.0 dBm) (no IR)
                         * 5200 MHz [40] (20.0 dBm) (no IR)
                         * 5220 MHz [44] (20.0 dBm) (no IR)
                         * 5240 MHz [48] (20.0 dBm) (no IR)
                         * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
                         * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
                         * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
                         * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
                         * 5500 MHz [100] (disabled)
                         * 5520 MHz [104] (disabled)
                         * 5540 MHz [108] (disabled)
                         * 5560 MHz [112] (disabled)
                         * 5580 MHz [116] (disabled)
                         * 5600 MHz [120] (disabled)
                         * 5620 MHz [124] (disabled)

 >iw reg get
global
country RU: DFS-ETSI
         (2402 - 2482 @ 40), (N/A, 20), (N/A)
         (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
         (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
         (5650 - 5730 @ 80), (N/A, 30), (0 ms), DFS
         (5735 - 5835 @ 80), (N/A, 30), (N/A)
         (57000 - 66000 @ 2160), (N/A, 40), (N/A)

 >hostapd.conf

interface=wlan0
driver=nl80211
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=NNN
### IEEE 802.11
hw_mode=a
channel=44
max_num_sta=128
auth_algs=1
disassoc_low_ack=1
### DFS
ieee80211h=1
ieee80211d=1
country_code=RU
### IEEE 802.11n
ieee80211n=1
ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]
### IEEE 802.11ac
ieee80211ac=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
vht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP7][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]
### WPA/IEEE 802.11i
wpa=2
wpa_key_mgmt=SAE WPA-PSK WPA-PSK-SHA256
wpa_passphrase=xxx
wpa_pairwise=CCMP
sae_password=xxx
ieee80211w=1
macaddr_acl=1
accept_mac_file=/etc/hostapd/hostapd.accept
### hostapd event logger configuration
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
### WMM
wmm_enabled=1
uapsd_advertisement_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
### TX queue parameters
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5


Best regards,
Sergey


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 7+ messages in thread
* Re: Compex WLE600VX AP mode 5GHz doesn't work since kernel 5.6
@ 2020-05-24  2:37 Michael Berg
  2020-05-27 16:58 ` Brian Norris
  0 siblings, 1 reply; 7+ messages in thread
From: Michael Berg @ 2020-05-24  2:37 UTC (permalink / raw)
  To: ath10k, nick, wgong, kvalo

More follow up on the following patch that broke 5GHz AP mode on Compex
cards
https://github.com/torvalds/linux/commit/2dc016599cfa9672a147528ca26d70c3654a5423

I just downloaded and checked the linux-5.7-rc6 kernel source,
and the problematic code is still in drivers/net/wireless/ath/regd.c.

Are they any updates on when this patch will be corrected/reverted?

Thank you for you time.

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2020-06-22 23:07 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-12  9:10 Compex WLE600VX AP mode 5GHz doesn't work since kernel 5.6 svp
2020-04-16 12:32 ` Kalle Valo
2020-04-23  7:04   ` Wen Gong
2020-05-24  2:37 Michael Berg
2020-05-27 16:58 ` Brian Norris
2020-06-22 22:57   ` Nick Marriott
2020-06-22 23:07     ` Brian Norris

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).