* ath10k-firmware: QCA4019 hw1.0: Add ZTE MF289F rev. AT1/AT2 (2.4G/5.8G) specific BDF @ 2022-08-17 9:32 Giammarco Marzano 2023-03-17 11:38 ` Kalle Valo 0 siblings, 1 reply; 4+ messages in thread From: Giammarco Marzano @ 2022-08-17 9:32 UTC (permalink / raw) To: ath10k [-- Attachment #1: Type: text/plain, Size: 1063 bytes --] Hi, this file is for add definition for ZTE MF289F. The device is currently under review as PR on OpenWRT: https://github.com/openwrt/openwrt/pull/10418 Please ignore my email of 3 August, this board binary add support for 5Ghz on AT2 version with correct calibration data. * description for what hardware this is: - it is a IPQ4019 based board - one QCA4019 radio is used as 2.4GHz radio - one QCA4019 radio is used as 5Ghz radio in AT2 revision - one QCA9984 radio is used as 5GHz radio in AT1 revision * origin of the board file: taken from stock firmware image * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) - QCA4019 hw1.0 + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f md5sum: 175139f44d2ae01c2b23e093d571e962 + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f md5sum: 175139f44d2ae01c2b23e093d571e962 * attach the actual board file (board.bin) - The name of the file is equal to the first id string in the board-2.bin (minus the ".bin") Kind regards, Giammarco [-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f.bin --] [-- Type: application/macbinary, Size: 24308 bytes --] [-- Attachment #3: Type: text/plain, Size: 146 bytes --] _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Add ZTE MF289F rev. AT1/AT2 (2.4G/5.8G) specific BDF 2022-08-17 9:32 ath10k-firmware: QCA4019 hw1.0: Add ZTE MF289F rev. AT1/AT2 (2.4G/5.8G) specific BDF Giammarco Marzano @ 2023-03-17 11:38 ` Kalle Valo 2023-07-01 15:07 ` [v2] " Christian Lamparter 0 siblings, 1 reply; 4+ messages in thread From: Kalle Valo @ 2023-03-17 11:38 UTC (permalink / raw) To: Giammarco Marzano; +Cc: ath10k Giammarco Marzano <giammarco.marzano@gmail.com> writes: > this file is for add definition for ZTE MF289F. > > The device is currently under review as PR on OpenWRT: > https://github.com/openwrt/openwrt/pull/10418 > > Please ignore my email of 3 August, this board binary add support for > 5Ghz on AT2 version with correct calibration data. > > * description for what hardware this is: > > - it is a IPQ4019 based board > - one QCA4019 radio is used as 2.4GHz radio > - one QCA4019 radio is used as 5Ghz radio in AT2 revision > - one QCA9984 radio is used as 5GHz radio in AT1 revision > > * origin of the board file: taken from stock firmware image > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f > md5sum: 175139f44d2ae01c2b23e093d571e962 > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f > md5sum: 175139f44d2ae01c2b23e093d571e962 > > > * attach the actual board file (board.bin) > > - The name of the file is equal to the first id string in the board-2.bin > (minus the ".bin") Note: There was only board file attached but the text listed two. Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f Changed: Deleted: 1 board image(s) added, 0 changed, 0 deleted, 117 in total https://github.com/kvalo/ath10k-firmware/commit/5ff99d697bc686a3b77d7644b61aadfa3b1c5c3f -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
* [v2] ath10k-firmware: QCA4019 hw1.0: Add ZTE MF289F rev. AT1/AT2 (2.4G/5.8G) specific BDF 2023-03-17 11:38 ` Kalle Valo @ 2023-07-01 15:07 ` Christian Lamparter 2023-07-19 15:19 ` Kalle Valo 0 siblings, 1 reply; 4+ messages in thread From: Christian Lamparter @ 2023-07-01 15:07 UTC (permalink / raw) To: Kalle Valo, Giammarco Marzano, Georgios Kourachanis; +Cc: ath10k [-- Attachment #1: Type: text/plain, Size: 2817 bytes --] On 3/17/23 12:38, Kalle Valo wrote: > Giammarco Marzano <giammarco.marzano@gmail.com> writes: > >> this file is for add definition for ZTE MF289F. >> >> The device is currently under review as PR on OpenWRT: >> https://github.com/openwrt/openwrt/pull/10418 >> >> Please ignore my email of 3 August, this board binary add support for >> 5Ghz on AT2 version with correct calibration data. >> >> * description for what hardware this is: >> >> - it is a IPQ4019 based board >> - one QCA4019 radio is used as 2.4GHz radio >> - one QCA4019 radio is used as 5Ghz radio in AT2 revision >> - one QCA9984 radio is used as 5GHz radio in AT1 revision >> >> * origin of the board file: taken from stock firmware image >> >> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) >> >> - QCA4019 hw1.0 >> >> + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f >> md5sum: 175139f44d2ae01c2b23e093d571e962 >> + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f >> md5sum: 175139f44d2ae01c2b23e093d571e962 >> >> >> * attach the actual board file (board.bin) >> >> - The name of the file is equal to the first id string in the board-2.bin >> (minus the ".bin") > > Note: There was only board file attached but the text listed two. I can tell you what happen. This is thanks to the following OpenWrt Pull Request: <https://github.com/openwrt/openwrt/pull/13019> But back to Giammarco Marzano mail: His bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f.bin contained a packed "board-2.bin". So, the board-2.bin ended up within the linux-firmware's board-2.bin: <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/ath10k/QCA4019/hw1.0/board-2.bin> See at offset 14c360. There's an QCA-ATH10K-BOARD string. I don't think ath10k supports board-2.bin within board-2.bin. I've added the extracted the two board files within and attached them including the note to this mail after the === separator. (also fixed the md5sums) === * description for what hardware this is: - it is a IPQ4019 based board - one QCA4019 radio is used as 2.4GHz radio - one QCA4019 radio is used as 5Ghz radio in AT2 revision - one QCA9984 radio is used as 5GHz radio in AT1 revision * origin of the board file: taken from stock firmware image * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) - QCA4019 hw1.0 + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f md5sum: f0243c9d7b45bb0ffe3e58c27e71fe80 + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f md5sum: e0fd5376d24f0c2c3c49ba2a7fc37376 * attach the actual board file (board.bin) - The name of the file is equal to the first id string in the board-2.bin (minus the ".bin") Regards, Christian [-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f.bin --] [-- Type: application/octet-stream, Size: 12064 bytes --] [-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f.bin --] [-- Type: application/octet-stream, Size: 12064 bytes --] [-- Attachment #4: Type: text/plain, Size: 146 bytes --] _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [v2] ath10k-firmware: QCA4019 hw1.0: Add ZTE MF289F rev. AT1/AT2 (2.4G/5.8G) specific BDF 2023-07-01 15:07 ` [v2] " Christian Lamparter @ 2023-07-19 15:19 ` Kalle Valo 0 siblings, 0 replies; 4+ messages in thread From: Kalle Valo @ 2023-07-19 15:19 UTC (permalink / raw) To: Christian Lamparter; +Cc: Giammarco Marzano, Georgios Kourachanis, ath10k Christian Lamparter <chunkeey@gmail.com> writes: > On 3/17/23 12:38, Kalle Valo wrote: >> Giammarco Marzano <giammarco.marzano@gmail.com> writes: >> >>> this file is for add definition for ZTE MF289F. >>> >>> The device is currently under review as PR on OpenWRT: >>> https://github.com/openwrt/openwrt/pull/10418 >>> >>> Please ignore my email of 3 August, this board binary add support for >>> 5Ghz on AT2 version with correct calibration data. >>> >>> * description for what hardware this is: >>> >>> - it is a IPQ4019 based board >>> - one QCA4019 radio is used as 2.4GHz radio >>> - one QCA4019 radio is used as 5Ghz radio in AT2 revision >>> - one QCA9984 radio is used as 5GHz radio in AT1 revision >>> >>> * origin of the board file: taken from stock firmware image >>> >>> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) >>> >>> - QCA4019 hw1.0 >>> >>> + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f >>> md5sum: 175139f44d2ae01c2b23e093d571e962 >>> + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f >>> md5sum: 175139f44d2ae01c2b23e093d571e962 >>> >>> >>> * attach the actual board file (board.bin) >>> >>> - The name of the file is equal to the first id string in the board-2.bin >>> (minus the ".bin") >> Note: There was only board file attached but the text listed two. > > I can tell you what happen. This is thanks to the following OpenWrt > Pull Request: <https://github.com/openwrt/openwrt/pull/13019> > > But back to Giammarco Marzano mail: > His bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f.bin > contained a packed "board-2.bin". So, the board-2.bin ended up > within the linux-firmware's board-2.bin: > > <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/ath10k/QCA4019/hw1.0/board-2.bin> > See at offset 14c360. There's an QCA-ATH10K-BOARD string. I don't > think ath10k supports board-2.bin within board-2.bin. Yeah, board-2.bin within board-2.bin is not supported :) > I've added the extracted the two board files within and attached > them including the note to this mail after the === separator. > (also fixed the md5sums) Thanks for catching and fixing this. I should have been more careful. > === > > * description for what hardware this is: > > - it is a IPQ4019 based board > - one QCA4019 radio is used as 2.4GHz radio > - one QCA4019 radio is used as 5Ghz radio in AT2 revision > - one QCA9984 radio is used as 5GHz radio in AT1 revision > > * origin of the board file: taken from stock firmware image > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f > md5sum: f0243c9d7b45bb0ffe3e58c27e71fe80 > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f > md5sum: e0fd5376d24f0c2c3c49ba2a7fc37376 > > > * attach the actual board file (board.bin) > > - The name of the file is equal to the first id string in the board-2.bin > (minus the ".bin") Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f Changed: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f Deleted: 1 board image(s) added, 1 changed, 0 deleted, 148 in total https://github.com/kvalo/ath10k-firmware/commit/0bf43f8decd3ae5bb9f27c3a44f54b3fa23aaa31 -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-07-19 15:19 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-08-17 9:32 ath10k-firmware: QCA4019 hw1.0: Add ZTE MF289F rev. AT1/AT2 (2.4G/5.8G) specific BDF Giammarco Marzano 2023-03-17 11:38 ` Kalle Valo 2023-07-01 15:07 ` [v2] " Christian Lamparter 2023-07-19 15:19 ` Kalle Valo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).