From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
Anilkumar Kolli <akolli@codeaurora.org>,
Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 2/3] ath11k: add software monitor ring descriptor for full monitor
Date: Wed, 21 Jul 2021 20:19:04 +0300 [thread overview]
Message-ID: <20210721171905.61838-3-jouni@codeaurora.org> (raw)
In-Reply-To: <20210721171905.61838-1-jouni@codeaurora.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
In full monitor mode, monitor destination ring is read in
software monitor ring descriptor format instead of
reo_entrance_ring format. Add new sw_mon_ring descriptor.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/hal_desc.h | 19 ++++++++++
drivers/net/wireless/ath/ath11k/hal_rx.c | 44 ++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/hal_rx.h | 17 +++++++++
3 files changed, 80 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/hal_desc.h b/drivers/net/wireless/ath/ath11k/hal_desc.h
index d54ec6aa6281..0be0e8939783 100644
--- a/drivers/net/wireless/ath/ath11k/hal_desc.h
+++ b/drivers/net/wireless/ath/ath11k/hal_desc.h
@@ -856,6 +856,25 @@ struct hal_reo_entrance_ring {
* this ring has looped around the ring.
*/
+#define HAL_SW_MON_RING_INFO0_RXDMA_PUSH_REASON GENMASK(1, 0)
+#define HAL_SW_MON_RING_INFO0_RXDMA_ERROR_CODE GENMASK(6, 2)
+#define HAL_SW_MON_RING_INFO0_MPDU_FRAG_NUMBER GENMASK(10, 7)
+#define HAL_SW_MON_RING_INFO0_FRAMELESS_BAR BIT(11)
+#define HAL_SW_MON_RING_INFO0_STATUS_BUF_CNT GENMASK(15, 12)
+#define HAL_SW_MON_RING_INFO0_END_OF_PPDU BIT(16)
+
+#define HAL_SW_MON_RING_INFO1_PHY_PPDU_ID GENMASK(15, 0)
+#define HAL_SW_MON_RING_INFO1_RING_ID GENMASK(27, 20)
+#define HAL_SW_MON_RING_INFO1_LOOPING_COUNT GENMASK(31, 28)
+
+struct hal_sw_monitor_ring {
+ struct ath11k_buffer_addr buf_addr_info;
+ struct rx_mpdu_desc rx_mpdu_info;
+ struct ath11k_buffer_addr status_buf_addr_info;
+ u32 info0;
+ u32 info1;
+} __packed;
+
#define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER GENMASK(15, 0)
#define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED BIT(16)
diff --git a/drivers/net/wireless/ath/ath11k/hal_rx.c b/drivers/net/wireless/ath/ath11k/hal_rx.c
index 325055ca41ab..f072c95e7434 100644
--- a/drivers/net/wireless/ath/ath11k/hal_rx.c
+++ b/drivers/net/wireless/ath/ath11k/hal_rx.c
@@ -1184,3 +1184,47 @@ void ath11k_hal_rx_reo_ent_buf_paddr_get(void *rx_desc, dma_addr_t *paddr,
*pp_buf_addr = (void *)buf_addr_info;
}
+
+void
+ath11k_hal_rx_sw_mon_ring_buf_paddr_get(void *rx_desc,
+ struct hal_sw_mon_ring_entries *sw_mon_entries)
+{
+ struct hal_sw_monitor_ring *sw_mon_ring = rx_desc;
+ struct ath11k_buffer_addr *buf_addr_info;
+ struct ath11k_buffer_addr *status_buf_addr_info;
+ struct rx_mpdu_desc *rx_mpdu_desc_info_details;
+
+ rx_mpdu_desc_info_details = &sw_mon_ring->rx_mpdu_info;
+
+ sw_mon_entries->msdu_cnt = FIELD_GET(RX_MPDU_DESC_INFO0_MSDU_COUNT,
+ rx_mpdu_desc_info_details->info0);
+
+ buf_addr_info = &sw_mon_ring->buf_addr_info;
+ status_buf_addr_info = &sw_mon_ring->status_buf_addr_info;
+
+ sw_mon_entries->mon_dst_paddr = (((u64)FIELD_GET(BUFFER_ADDR_INFO1_ADDR,
+ buf_addr_info->info1)) << 32) |
+ FIELD_GET(BUFFER_ADDR_INFO0_ADDR,
+ buf_addr_info->info0);
+
+ sw_mon_entries->mon_status_paddr =
+ (((u64)FIELD_GET(BUFFER_ADDR_INFO1_ADDR,
+ status_buf_addr_info->info1)) << 32) |
+ FIELD_GET(BUFFER_ADDR_INFO0_ADDR,
+ status_buf_addr_info->info0);
+
+ sw_mon_entries->mon_dst_sw_cookie = FIELD_GET(BUFFER_ADDR_INFO1_SW_COOKIE,
+ buf_addr_info->info1);
+
+ sw_mon_entries->mon_status_sw_cookie = FIELD_GET(BUFFER_ADDR_INFO1_SW_COOKIE,
+ status_buf_addr_info->info1);
+
+ sw_mon_entries->status_buf_count = FIELD_GET(HAL_SW_MON_RING_INFO0_STATUS_BUF_CNT,
+ sw_mon_ring->info0);
+
+ sw_mon_entries->dst_buf_addr_info = buf_addr_info;
+ sw_mon_entries->status_buf_addr_info = status_buf_addr_info;
+
+ sw_mon_entries->ppdu_id =
+ FIELD_GET(HAL_SW_MON_RING_INFO1_PHY_PPDU_ID, sw_mon_ring->info1);
+}
diff --git a/drivers/net/wireless/ath/ath11k/hal_rx.h b/drivers/net/wireless/ath/ath11k/hal_rx.h
index 0f1f04b812b9..8db420ef6351 100644
--- a/drivers/net/wireless/ath/ath11k/hal_rx.h
+++ b/drivers/net/wireless/ath/ath11k/hal_rx.h
@@ -77,6 +77,20 @@ enum hal_rx_mon_status {
HAL_RX_MON_STATUS_BUF_DONE,
};
+struct hal_sw_mon_ring_entries {
+ dma_addr_t mon_dst_paddr;
+ dma_addr_t mon_status_paddr;
+ u32 mon_dst_sw_cookie;
+ u32 mon_status_sw_cookie;
+ void *dst_buf_addr_info;
+ void *status_buf_addr_info;
+ u16 ppdu_id;
+ u8 status_buf_count;
+ u8 msdu_cnt;
+ bool end_of_ppdu;
+ bool drop_ppdu;
+};
+
struct hal_rx_mon_ppdu_info {
u32 ppdu_id;
u32 ppdu_ts;
@@ -331,6 +345,9 @@ void ath11k_hal_rx_reo_ent_buf_paddr_get(void *rx_desc,
dma_addr_t *paddr, u32 *sw_cookie,
void **pp_buf_addr_info, u8 *rbm,
u32 *msdu_cnt);
+void
+ath11k_hal_rx_sw_mon_ring_buf_paddr_get(void *rx_desc,
+ struct hal_sw_mon_ring_entries *sw_mon_ent);
enum hal_rx_mon_status
ath11k_hal_rx_parse_mon_status(struct ath11k_base *ab,
struct hal_rx_mon_ppdu_info *ppdu_info,
--
2.25.1
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2021-07-21 17:20 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-21 17:19 [PATCH 0/3] ath11k: add full monitor mode support for QCN9074 Jouni Malinen
2021-07-21 17:19 ` [PATCH 1/3] ath11k: add htt cmd to enable full monitor mode Jouni Malinen
2021-09-24 11:42 ` Kalle Valo
2021-09-27 4:19 ` akolli
2021-09-28 6:56 ` Kalle Valo
2021-09-30 6:47 ` Anilkumar Kolli
2021-10-04 4:23 ` Anilkumar Kolli
2021-09-24 13:52 ` Kalle Valo
2021-09-27 4:31 ` Anilkumar Kolli
2021-07-21 17:19 ` Jouni Malinen [this message]
2021-07-21 17:19 ` [PATCH 3/3] ath11k: process full monitor mode rx support Jouni Malinen
2021-11-12 7:52 ` Kalle Valo
2021-12-08 13:13 ` Anilkumar Kolli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210721171905.61838-3-jouni@codeaurora.org \
--to=jouni@codeaurora.org \
--cc=akolli@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).