ath11k.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855
@ 2021-11-11  6:53 Wen Gong
  2021-11-15 12:33 ` Kalle Valo
  2021-11-17  7:30 ` Kalle Valo
  0 siblings, 2 replies; 3+ messages in thread
From: Wen Gong @ 2021-11-11  6:53 UTC (permalink / raw)
  To: ath11k; +Cc: linux-wireless, quic_wgong

Currently ath11k only support string type with bus, chip id and board id
such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and
"bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in
board-2.bin. For WCN6855, it is not enough to distinguish all different
chips.

This is to add a new string type which include bus, chip id, board id,
vendor, device, subsystem-vendor and subsystem-device for WCN6855.

ath11k will first load board-2.bin and search in it for the board data
with the above parameters, if matched one board data, then download it
to firmware, if not matched any one, then ath11k will download the file
board.bin to firmware.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
---
v2: remove the mask of chip id and board id in ath11k_core_create_board_name()

 drivers/net/wireless/ath/ath11k/core.c | 27 ++++++++++++++++++++------
 drivers/net/wireless/ath/ath11k/core.h | 13 +++++++++++++
 drivers/net/wireless/ath/ath11k/pci.c  | 10 ++++++++++
 3 files changed, 44 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 2012b0170e3c..3ac0dca997e1 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -473,11 +473,26 @@ static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
 		scnprintf(variant, sizeof(variant), ",variant=%s",
 			  ab->qmi.target.bdf_ext);
 
-	scnprintf(name, name_len,
-		  "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s",
-		  ath11k_bus_str(ab->hif.bus),
-		  ab->qmi.target.chip_id,
-		  ab->qmi.target.board_id, variant);
+	switch (ab->id.bdf_search) {
+	case ATH11K_BDF_SEARCH_BUS_AND_BOARD:
+		scnprintf(name, name_len,
+			  "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%04x,qmi-board-id=%04x%s",
+			  ath11k_bus_str(ab->hif.bus),
+			  ab->id.vendor, ab->id.device,
+			  ab->id.subsystem_vendor,
+			  ab->id.subsystem_device,
+			  ab->qmi.target.chip_id,
+			  ab->qmi.target.board_id,
+			  variant);
+		break;
+	default:
+		scnprintf(name, name_len,
+			  "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s",
+			  ath11k_bus_str(ab->hif.bus),
+			  ab->qmi.target.chip_id,
+			  ab->qmi.target.board_id, variant);
+		break;
+	}
 
 	ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot using board name '%s'\n", name);
 
@@ -716,7 +731,7 @@ int ath11k_core_fetch_board_data_api_1(struct ath11k_base *ab,
 	return 0;
 }
 
-#define BOARD_NAME_SIZE 100
+#define BOARD_NAME_SIZE 200
 int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd)
 {
 	char boardname[BOARD_NAME_SIZE];
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index dcc54d4cc096..81680da96156 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -54,6 +54,11 @@ enum ath11k_supported_bw {
 	ATH11K_BW_160	= 3,
 };
 
+enum ath11k_bdf_search {
+	ATH11K_BDF_SEARCH_DEFAULT,
+	ATH11K_BDF_SEARCH_BUS_AND_BOARD,
+};
+
 enum wme_ac {
 	WME_AC_BE,
 	WME_AC_BK,
@@ -893,6 +898,14 @@ struct ath11k_base {
 
 	struct completion htc_suspend;
 
+	struct {
+		enum ath11k_bdf_search bdf_search;
+		u32 vendor;
+		u32 device;
+		u32 subsystem_vendor;
+		u32 subsystem_device;
+	} id;
+
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
 };
diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index f262950ee414..a2acda28d35f 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -1430,6 +1430,15 @@ static int ath11k_pci_probe(struct pci_dev *pdev,
 		goto err_free_core;
 	}
 
+	ath11k_dbg(ab, ATH11K_DBG_BOOT, "pci probe %04x:%04x %04x:%04x\n",
+		   pdev->vendor, pdev->device,
+		   pdev->subsystem_vendor, pdev->subsystem_device);
+
+	ab->id.vendor = pdev->vendor;
+	ab->id.device = pdev->device;
+	ab->id.subsystem_vendor = pdev->subsystem_vendor;
+	ab->id.subsystem_device = pdev->subsystem_device;
+
 	switch (pci_dev->device) {
 	case QCA6390_DEVICE_ID:
 		ath11k_pci_read_hw_version(ab, &soc_hw_version_major,
@@ -1452,6 +1461,7 @@ static int ath11k_pci_probe(struct pci_dev *pdev,
 		ab->hw_rev = ATH11K_HW_QCN9074_HW10;
 		break;
 	case WCN6855_DEVICE_ID:
+		ab->id.bdf_search = ATH11K_BDF_SEARCH_BUS_AND_BOARD;
 		ath11k_pci_read_hw_version(ab, &soc_hw_version_major,
 					   &soc_hw_version_minor);
 		switch (soc_hw_version_major) {
-- 
2.31.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855
  2021-11-11  6:53 [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855 Wen Gong
@ 2021-11-15 12:33 ` Kalle Valo
  2021-11-17  7:30 ` Kalle Valo
  1 sibling, 0 replies; 3+ messages in thread
From: Kalle Valo @ 2021-11-15 12:33 UTC (permalink / raw)
  To: Wen Gong; +Cc: ath11k, linux-wireless

Wen Gong <quic_wgong@quicinc.com> writes:

> Currently ath11k only support string type with bus, chip id and board id
> such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and
> "bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in
> board-2.bin. For WCN6855, it is not enough to distinguish all different
> chips.
>
> This is to add a new string type which include bus, chip id, board id,
> vendor, device, subsystem-vendor and subsystem-device for WCN6855.
>
> ath11k will first load board-2.bin and search in it for the board data
> with the above parameters, if matched one board data, then download it
> to firmware, if not matched any one, then ath11k will download the file
> board.bin to firmware.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
>
> Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
> Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
> ---
> v2: remove the mask of chip id and board id in ath11k_core_create_board_name()
>
>  drivers/net/wireless/ath/ath11k/core.c | 27 ++++++++++++++++++++------
>  drivers/net/wireless/ath/ath11k/core.h | 13 +++++++++++++
>  drivers/net/wireless/ath/ath11k/pci.c  | 10 ++++++++++
>  3 files changed, 44 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
> index 2012b0170e3c..3ac0dca997e1 100644
> --- a/drivers/net/wireless/ath/ath11k/core.c
> +++ b/drivers/net/wireless/ath/ath11k/core.c
> @@ -473,11 +473,26 @@ static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
>  		scnprintf(variant, sizeof(variant), ",variant=%s",
>  			  ab->qmi.target.bdf_ext);
>  
> -	scnprintf(name, name_len,
> -		  "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s",
> -		  ath11k_bus_str(ab->hif.bus),
> -		  ab->qmi.target.chip_id,
> -		  ab->qmi.target.board_id, variant);
> +	switch (ab->id.bdf_search) {
> +	case ATH11K_BDF_SEARCH_BUS_AND_BOARD:
> +		scnprintf(name, name_len,
> +			  "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%04x,qmi-board-id=%04x%s",

For consistency I changed qmi-chip-id and qmi-board-id to use %d, like
before:

 "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%d,qmi-board-id=%d%s",

This is now in the pending branch.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855
  2021-11-11  6:53 [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855 Wen Gong
  2021-11-15 12:33 ` Kalle Valo
@ 2021-11-17  7:30 ` Kalle Valo
  1 sibling, 0 replies; 3+ messages in thread
From: Kalle Valo @ 2021-11-17  7:30 UTC (permalink / raw)
  To: Wen Gong; +Cc: ath11k, linux-wireless, quic_wgong

Wen Gong <quic_wgong@quicinc.com> wrote:

> Currently ath11k only support string type with bus, chip id and board id
> such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and
> "bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in
> board-2.bin. For WCN6855, it is not enough to distinguish all different
> chips.
> 
> This is to add a new string type which include bus, chip id, board id,
> vendor, device, subsystem-vendor and subsystem-device for WCN6855.
> 
> ath11k will first load board-2.bin and search in it for the board data
> with the above parameters, if matched one board data, then download it
> to firmware, if not matched any one, then ath11k will download the file
> board.bin to firmware.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
> 
> Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
> Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

fc95d10ac41d ath11k: add string type to search board data in board-2.bin for WCN6855

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20211111065340.20187-1-quic_wgong@quicinc.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-11-17  7:30 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-11  6:53 [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855 Wen Gong
2021-11-15 12:33 ` Kalle Valo
2021-11-17  7:30 ` Kalle Valo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).