* [ath9k-devel] problem with setting MCS code for rate in ath9k
@ 2012-06-05 11:54 Kamran Nishat
2012-06-05 14:54 ` Kamran Nishat
0 siblings, 1 reply; 2+ messages in thread
From: Kamran Nishat @ 2012-06-05 11:54 UTC (permalink / raw)
To: ath9k-devel
root at wireless2:/sys/kernel/debug/ieee80211/phy0/ath9k# cat ../rc/name
minstrel_ht
root at wireless2:/sys/kernel/debug/ieee80211/phy0/ath9k# echo 15 >
fix_mcs_rate
SSID: wireless
freq: 2412
RX: 2068030 bytes (14072 packets)
TX: 2439 bytes (83 packets)
signal: -58 dBm
tx bitrate: 130.0 MBit/s MCS 15
bss flags: short-preamble
dtim period: 0
beacon int: 102
root at wireless2:/sys/kernel/debug/ieee80211/phy0/ath9k# iw dev wlan0 link
Connected to 00:23:04:c8:8d:90 (on wlan0)
SSID: wireless
freq: 2412
RX: 2068620 bytes (14076 packets)
TX: 2439 bytes (83 packets)
signal: -57 dBm
tx bitrate: 130.0 MBit/s MCS 15
bss flags: short-preamble
dtim period: 0
beacon int: 102
root at wireless2:/sys/kernel/debug/ieee80211/phy0/ath9k# iw dev wlan0 link
Connected to 00:23:04:c8:8d:90 (on wlan0)
SSID: wireless
freq: 2412
RX: 2082419 bytes (14170 packets)
TX: 2487 bytes (85 packets)
signal: -57 dBm
tx bitrate: 1.0 MBit/s
bss flags: short-preamble
dtim period: 0
beacon int: 102
As you can see after the patch you provided us it is setting rate to MCS
code then it changes it to 1.0 MBit/s
So what should we do
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120605/d1fd0835/attachment.htm
^ permalink raw reply [flat|nested] 2+ messages in thread
* [ath9k-devel] problem with setting MCS code for rate in ath9k
2012-06-05 11:54 [ath9k-devel] problem with setting MCS code for rate in ath9k Kamran Nishat
@ 2012-06-05 14:54 ` Kamran Nishat
0 siblings, 0 replies; 2+ messages in thread
From: Kamran Nishat @ 2012-06-05 14:54 UTC (permalink / raw)
To: ath9k-devel
Thanks a lot, it is working now.
On Tue, Jun 5, 2012 at 5:54 PM, Kamran Nishat <kamran.nishat@gmail.com>wrote:
> root at wireless2:/sys/kernel/debug/ieee80211/phy0/ath9k# cat ../rc/name
> minstrel_ht
>
> root at wireless2:/sys/kernel/debug/ieee80211/phy0/ath9k# echo 15 >
> fix_mcs_rate
>
> SSID: wireless
> freq: 2412
> RX: 2068030 bytes (14072 packets)
> TX: 2439 bytes (83 packets)
> signal: -58 dBm
> tx bitrate: 130.0 MBit/s MCS 15
>
> bss flags: short-preamble
> dtim period: 0
> beacon int: 102
> root at wireless2:/sys/kernel/debug/ieee80211/phy0/ath9k# iw dev wlan0 link
> Connected to 00:23:04:c8:8d:90 (on wlan0)
> SSID: wireless
> freq: 2412
> RX: 2068620 bytes (14076 packets)
> TX: 2439 bytes (83 packets)
> signal: -57 dBm
> tx bitrate: 130.0 MBit/s MCS 15
>
> bss flags: short-preamble
> dtim period: 0
> beacon int: 102
> root at wireless2:/sys/kernel/debug/ieee80211/phy0/ath9k# iw dev wlan0 link
> Connected to 00:23:04:c8:8d:90 (on wlan0)
> SSID: wireless
> freq: 2412
> RX: 2082419 bytes (14170 packets)
> TX: 2487 bytes (85 packets)
> signal: -57 dBm
> tx bitrate: 1.0 MBit/s
>
> bss flags: short-preamble
> dtim period: 0
> beacon int: 102
>
>
> As you can see after the patch you provided us it is setting rate to MCS
> code then it changes it to 1.0 MBit/s
> So what should we do
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120605/b758bc5d/attachment.htm
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-06-05 14:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-05 11:54 [ath9k-devel] problem with setting MCS code for rate in ath9k Kamran Nishat
2012-06-05 14:54 ` Kamran Nishat
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).