From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH/RFC 5/6] arm64: dts: renesas: Add support for H3ULCB with R-Car H3Ne-1.7G Date: Wed, 20 Jul 2022 10:08:06 +0200 [thread overview] Message-ID: <b2ab76c44d0cb298e6f801e4c0c63bbb8b0ae03e.1656072871.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1656072871.git.geert+renesas@glider.be> Add support for the Renesas R-Car Starter Kit Premier equipped with an R-Car H3Ne-1.7G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/renesas/Makefile | 1 + arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts | 53 +++++++++++++++++++ 2 files changed, 54 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index b83a5fcad1f3a4ba..68f64649f9fc362d 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779mb-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779mb-ulcb.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts new file mode 100644 index 0000000000000000..f17aa4b824abe6a6 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car + * H3Ne-1.7G + * + * Copyright (C) 2022 Glider bv + * + * Based on r8a77951-ulcb.dts + * Copyright (C) 2016 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a779mb.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas H3ULCB board based on r8a779mb"; + compatible = "renesas,h3ulcb", "renesas,r8a779mb", "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 4>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH/RFC 5/6] arm64: dts: renesas: Add support for H3ULCB with R-Car H3Ne-1.7G Date: Wed, 20 Jul 2022 10:08:06 +0200 [thread overview] Message-ID: <b2ab76c44d0cb298e6f801e4c0c63bbb8b0ae03e.1656072871.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1656072871.git.geert+renesas@glider.be> Add support for the Renesas R-Car Starter Kit Premier equipped with an R-Car H3Ne-1.7G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/renesas/Makefile | 1 + arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts | 53 +++++++++++++++++++ 2 files changed, 54 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index b83a5fcad1f3a4ba..68f64649f9fc362d 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779mb-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779mb-ulcb.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts new file mode 100644 index 0000000000000000..f17aa4b824abe6a6 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779mb-ulcb.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car + * H3Ne-1.7G + * + * Copyright (C) 2022 Glider bv + * + * Based on r8a77951-ulcb.dts + * Copyright (C) 2016 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a779mb.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas H3ULCB board based on r8a779mb"; + compatible = "renesas,h3ulcb", "renesas,r8a779mb", "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 4>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-07-20 8:08 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-20 8:08 [PATCH 0/6] arm64: dts: renesas: Add support for R-Car H3Ne-1.7G Geert Uytterhoeven 2022-07-20 8:08 ` Geert Uytterhoeven 2022-07-20 8:08 ` [PATCH 1/6] dt-bindings: arm: renesas: Document R-Car H3Ne-1.7G SoC and boards Geert Uytterhoeven 2022-07-20 8:08 ` Geert Uytterhoeven 2022-07-20 13:03 ` Krzysztof Kozlowski 2022-07-20 13:03 ` Krzysztof Kozlowski 2022-07-20 8:08 ` [PATCH 2/6] soc: renesas: Identify R-Car H3Ne-1.7G Geert Uytterhoeven 2022-07-20 8:08 ` Geert Uytterhoeven 2022-07-20 8:08 ` [PATCH 3/6] arm64: dts: renesas: Add Renesas R8A779MB SoC support Geert Uytterhoeven 2022-07-20 8:08 ` Geert Uytterhoeven 2022-07-20 8:08 ` [PATCH/RFC 4/6] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3Ne-1.7G Geert Uytterhoeven 2022-07-20 8:08 ` Geert Uytterhoeven 2022-07-20 8:08 ` Geert Uytterhoeven [this message] 2022-07-20 8:08 ` [PATCH/RFC 5/6] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven 2022-07-20 8:08 ` [PATCH/RFC 6/6] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven 2022-07-20 8:08 ` Geert Uytterhoeven 2022-07-21 0:24 ` [PATCH 0/6] arm64: dts: renesas: Add support for " Yoshihiro Shimoda 2022-07-21 0:24 ` Yoshihiro Shimoda
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=b2ab76c44d0cb298e6f801e4c0c63bbb8b0ae03e.1656072871.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.