[B.A.T.M.A.N.] [PATCH 00/21] pull request for net-next: batman-adv 2019-02-13

[B.A.T.M.A.N.] [PATCH 00/21] pull request for net-next: batman-adv 2019-02-13

[Simon Wunderlich]

Hi David,

here is another pull request for batman-adv to go into net-next. The main
patchset is Svens netlink restructure series, which was also discussed on netdev
for quite some time now and should be ready to be integrated.

Please pull or let me know of any problem!

Thank you,
      Simon

The following changes since commit 7a79d717e0817610932ce3b7b6033ea06ee1d577:

  batman-adv: Update copyright years for 2019 (2019-01-04 11:04:24 +0100)

are available in the git repository at:

  git://git.open-mesh.org/linux-merge.git tags/batadv-next-for-davem-20190213

for you to fetch changes up to 7e6f461efe2554e35b740f3faea2994fc9551947:

  batman-adv: Trigger genl notification on sysfs config change (2019-02-09 14:28:15 +0100)

----------------------------------------------------------------
This feature/cleanup patchset includes the following patches:

 - fix memory leak in in batadv_dat_put_dhcp, by Martin Weinelt

 - fix typo, by Sven Eckelmann

 - netlink restructuring patch series (part 2), by Sven Eckelmann
   (19 patches)

----------------------------------------------------------------
Martin Weinelt (1):
      batman-adv: fix memory leak in in batadv_dat_put_dhcp

Sven Eckelmann (20):
      batman-adv: Fix typo "reseved" -> "reserved"
      batman-adv: Move common genl doit code pre/post hooks
      batman-adv: Prepare framework for mesh genl config
      batman-adv: Prepare framework for hardif genl config
      batman-adv: Prepare framework for vlan genl config
      batman-adv: Add aggregated_ogms mesh genl configuration
      batman-adv: Add ap_isolation mesh/vlan genl configuration
      batman-adv: Add bonding mesh genl configuration
      batman-adv: Add bridge_loop_avoidance mesh genl configuration
      batman-adv: Add distributed_arp_table mesh genl configuration
      batman-adv: Add fragmentation mesh genl configuration
      batman-adv: Add gateway mesh genl configuration
      batman-adv: Add hop_penalty mesh genl configuration
      batman-adv: Add log_level mesh genl configuration
      batman-adv: Add multicast forceflood mesh genl configuration
      batman-adv: Add network_coding mesh genl configuration
      batman-adv: Add orig_interval mesh genl configuration
      batman-adv: Add elp_interval hardif genl configuration
      batman-adv: Add throughput_override hardif genl configuration
      batman-adv: Trigger genl notification on sysfs config change

 include/uapi/linux/batadv_packet.h     |    2 +-
 include/uapi/linux/batman_adv.h        |  190 +++++-
 net/batman-adv/distributed-arp-table.c |    2 +
 net/batman-adv/gateway_client.c        |    1 -
 net/batman-adv/gateway_common.c        |    1 +
 net/batman-adv/gateway_common.h        |    6 -
 net/batman-adv/netlink.c               | 1080 ++++++++++++++++++++++++++++----
 net/batman-adv/netlink.h               |    6 +
 net/batman-adv/soft-interface.c        |    2 +-
 net/batman-adv/sysfs.c                 |   64 +-
 10 files changed, 1206 insertions(+), 148 deletions(-)

[B.A.T.M.A.N.] [PATCH 01/21] batman-adv: fix memory leak in in batadv_dat_put_dhcp

[Simon Wunderlich]

From: Martin Weinelt <martin@linuxlounge.net>

batadv_dat_put_dhcp is creating a new ARP packet via
batadv_dat_arp_create_reply and tries to forward it via
batadv_dat_send_data to different peers in the DHT. The original skb is not
consumed by batadv_dat_send_data and thus has to be consumed by the caller.

Fixes: b61ec31c8575 ("batman-adv: Snoop DHCPACKs for DAT")
Signed-off-by: Martin Weinelt <martin@linuxlounge.net>
[sven@narfation.org: add commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 net/batman-adv/distributed-arp-table.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c
index 899ab051ffce..310a4f353008 100644
--- a/net/batman-adv/distributed-arp-table.c
+++ b/net/batman-adv/distributed-arp-table.c
@@ -1711,6 +1711,8 @@ static void batadv_dat_put_dhcp(struct batadv_priv *bat_priv, u8 *chaddr,
 	batadv_dat_send_data(bat_priv, skb, yiaddr, vid, BATADV_P_DAT_DHT_PUT);
 	batadv_dat_send_data(bat_priv, skb, ip_dst, vid, BATADV_P_DAT_DHT_PUT);
 
+	consume_skb(skb);
+
 	batadv_dbg(BATADV_DBG_DAT, bat_priv,
 		   "Snooped from outgoing DHCPACK (server address): %pI4, %pM (vid: %i)\n",
 		   &ip_dst, hw_dst, batadv_print_vid(vid));
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 02/21] batman-adv: Fix typo "reseved" -> "reserved"

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

checkpatch.pl complains since commit 45e417022023 ("scripts/spelling.txt:
add more spellings to spelling.txt") about an additional spelling mistake
in batman-adv:`

  CHECK: 'reseved' may be misspelled - perhaps 'reserved'?
  #232: FILE: include/uapi/linux/batadv_packet.h:232:
  + * @flags: reseved for routing relevant flags - currently always 0

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batadv_packet.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h
index 7eb2936a8e22..c99336f4eefe 100644
--- a/include/uapi/linux/batadv_packet.h
+++ b/include/uapi/linux/batadv_packet.h
@@ -229,7 +229,7 @@ struct batadv_ogm_packet {
  * @packet_type: batman-adv packet type, part of the general header
  * @version: batman-adv protocol version, part of the general header
  * @ttl: time to live for this packet, part of the general header
- * @flags: reseved for routing relevant flags - currently always 0
+ * @flags: reserved for routing relevant flags - currently always 0
  * @seqno: sequence number
  * @orig: originator mac address
  * @tvlv_len: length of the appended tvlv buffer (in bytes)
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 03/21] batman-adv: Move common genl doit code pre/post hooks

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks")
intoduced a mechanism to run specific code for doit hooks before/after the
hooks are run. Since all doit hooks are requiring the batadv softif, it
should be retrieved/freed in these helpers to simplify the code.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 net/batman-adv/netlink.c | 143 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 100 insertions(+), 43 deletions(-)

diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 5fe833cc9507..e56c40d1bfe0 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -20,8 +20,10 @@
 #include "main.h"
 
 #include <linux/atomic.h>
+#include <linux/bitops.h>
 #include <linux/byteorder/generic.h>
 #include <linux/cache.h>
+#include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/export.h>
 #include <linux/genetlink.h>
@@ -54,6 +56,8 @@
 #include "tp_meter.h"
 #include "translation-table.h"
 
+struct net;
+
 struct genl_family batadv_netlink_family;
 
 /* multicast groups */
@@ -61,6 +65,18 @@ enum batadv_netlink_multicast_groups {
 	BATADV_NL_MCGRP_TPMETER,
 };
 
+/**
+ * enum batadv_genl_ops_flags - flags for genl_ops's internal_flags
+ */
+enum batadv_genl_ops_flags {
+	/**
+	 * @BATADV_FLAG_NEED_MESH: request requires valid soft interface in
+	 *  attribute BATADV_ATTR_MESH_IFINDEX and expects a pointer to it to be
+	 *  saved in info->user_ptr[0]
+	 */
+	BATADV_FLAG_NEED_MESH = BIT(0),
+};
+
 static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
 	[BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER },
 };
@@ -329,40 +345,24 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst,
 static int
 batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
 {
-	struct net *net = genl_info_net(info);
-	struct net_device *soft_iface;
-	struct batadv_priv *bat_priv;
+	struct batadv_priv *bat_priv = info->user_ptr[0];
 	struct sk_buff *msg = NULL;
 	u32 test_length;
 	void *msg_head;
-	int ifindex;
 	u32 cookie;
 	u8 *dst;
 	int ret;
 
-	if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
-		return -EINVAL;
-
 	if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS])
 		return -EINVAL;
 
 	if (!info->attrs[BATADV_ATTR_TPMETER_TEST_TIME])
 		return -EINVAL;
 
-	ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
-	if (!ifindex)
-		return -EINVAL;
-
 	dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);
 
 	test_length = nla_get_u32(info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]);
 
-	soft_iface = dev_get_by_index(net, ifindex);
-	if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
-		ret = -ENODEV;
-		goto out;
-	}
-
 	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		ret = -ENOMEM;
@@ -377,15 +377,11 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	bat_priv = netdev_priv(soft_iface);
 	batadv_tp_start(bat_priv, dst, test_length, &cookie);
 
 	ret = batadv_netlink_tp_meter_put(msg, cookie);
 
  out:
-	if (soft_iface)
-		dev_put(soft_iface);
-
 	if (ret) {
 		if (msg)
 			nlmsg_free(msg);
@@ -406,38 +402,17 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
 static int
 batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info)
 {
-	struct net *net = genl_info_net(info);
-	struct net_device *soft_iface;
-	struct batadv_priv *bat_priv;
-	int ifindex;
+	struct batadv_priv *bat_priv = info->user_ptr[0];
 	u8 *dst;
 	int ret = 0;
 
-	if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
-		return -EINVAL;
-
 	if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS])
 		return -EINVAL;
 
-	ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
-	if (!ifindex)
-		return -EINVAL;
-
 	dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);
 
-	soft_iface = dev_get_by_index(net, ifindex);
-	if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
-		ret = -ENODEV;
-		goto out;
-	}
-
-	bat_priv = netdev_priv(soft_iface);
 	batadv_tp_stop(bat_priv, dst, BATADV_TP_REASON_CANCEL);
 
-out:
-	if (soft_iface)
-		dev_put(soft_iface);
-
 	return ret;
 }
 
@@ -545,6 +520,84 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
 	return msg->len;
 }
 
+/**
+ * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to soft interface (with increased refcnt) on success, error
+ *  pointer on error
+ */
+static struct net_device *
+batadv_get_softif_from_info(struct net *net, struct genl_info *info)
+{
+	struct net_device *soft_iface;
+	int ifindex;
+
+	if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
+		return ERR_PTR(-EINVAL);
+
+	ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
+
+	soft_iface = dev_get_by_index(net, ifindex);
+	if (!soft_iface)
+		return ERR_PTR(-ENODEV);
+
+	if (!batadv_softif_is_valid(soft_iface))
+		goto err_put_softif;
+
+	return soft_iface;
+
+err_put_softif:
+	dev_put(soft_iface);
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * batadv_pre_doit() - Prepare batman-adv genl doit request
+ * @ops: requested netlink operation
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
+			   struct genl_info *info)
+{
+	struct net *net = genl_info_net(info);
+	struct net_device *soft_iface;
+	struct batadv_priv *bat_priv;
+
+	if (ops->internal_flags & BATADV_FLAG_NEED_MESH) {
+		soft_iface = batadv_get_softif_from_info(net, info);
+		if (IS_ERR(soft_iface))
+			return PTR_ERR(soft_iface);
+
+		bat_priv = netdev_priv(soft_iface);
+		info->user_ptr[0] = bat_priv;
+	}
+
+	return 0;
+}
+
+/**
+ * batadv_post_doit() - End batman-adv genl doit request
+ * @ops: requested netlink operation
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ */
+static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
+			     struct genl_info *info)
+{
+	struct batadv_priv *bat_priv;
+
+	if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
+		bat_priv = info->user_ptr[0];
+		dev_put(bat_priv->soft_iface);
+	}
+}
+
 static const struct genl_ops batadv_netlink_ops[] = {
 	{
 		.cmd = BATADV_CMD_GET_MESH_INFO,
@@ -557,12 +610,14 @@ static const struct genl_ops batadv_netlink_ops[] = {
 		.flags = GENL_ADMIN_PERM,
 		.policy = batadv_netlink_policy,
 		.doit = batadv_netlink_tp_meter_start,
+		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
 	{
 		.cmd = BATADV_CMD_TP_METER_CANCEL,
 		.flags = GENL_ADMIN_PERM,
 		.policy = batadv_netlink_policy,
 		.doit = batadv_netlink_tp_meter_cancel,
+		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
 	{
 		.cmd = BATADV_CMD_GET_ROUTING_ALGOS,
@@ -639,6 +694,8 @@ struct genl_family batadv_netlink_family __ro_after_init = {
 	.version = 1,
 	.maxattr = BATADV_ATTR_MAX,
 	.netnsok = true,
+	.pre_doit = batadv_pre_doit,
+	.post_doit = batadv_post_doit,
 	.module = THIS_MODULE,
 	.ops = batadv_netlink_ops,
 	.n_ops = ARRAY_SIZE(batadv_netlink_ops),
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 04/21] batman-adv: Prepare framework for mesh genl config

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.

The main objects for this configuration is the mesh/soft-interface object.
Its actual object in memory already contains most of the available
configuration settings. The genl interface reflects this by allowing to
get/set it using the mesh specific commands.

The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is
reused as get command because it already provides the content of other
information from the mesh/soft-interface which are not yet configuration
specific.

The set command BATADV_CMD_SET_MESH will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command
message type that settings might have been changed and what the current
values are.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  16 +++-
 net/batman-adv/netlink.c        | 160 ++++++++++++++++++++++++----------------
 2 files changed, 111 insertions(+), 65 deletions(-)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a28e76a7e0a2..b3394aac9a88 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -27,6 +27,7 @@
 
 #define BATADV_NL_NAME "batadv"
 
+#define BATADV_NL_MCAST_GROUP_CONFIG	"config"
 #define BATADV_NL_MCAST_GROUP_TPMETER	"tpmeter"
 
 /**
@@ -372,10 +373,14 @@ enum batadv_nl_commands {
 	BATADV_CMD_UNSPEC,
 
 	/**
-	 * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
-	 * device
+	 * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh
 	 */
-	BATADV_CMD_GET_MESH_INFO,
+	BATADV_CMD_GET_MESH,
+
+	/**
+	 * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH
+	 */
+	BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH,
 
 	/**
 	 * @BATADV_CMD_TP_METER: Start a tp meter session
@@ -443,6 +448,11 @@ enum batadv_nl_commands {
 	 */
 	BATADV_CMD_GET_MCAST_FLAGS,
 
+	/**
+	 * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh
+	 */
+	BATADV_CMD_SET_MESH,
+
 	/* add new commands above here */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index e56c40d1bfe0..179cc7cfcb70 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -62,6 +62,7 @@ struct genl_family batadv_netlink_family;
 
 /* multicast groups */
 enum batadv_netlink_multicast_groups {
+	BATADV_NL_MCGRP_CONFIG,
 	BATADV_NL_MCGRP_TPMETER,
 };
 
@@ -78,6 +79,7 @@ enum batadv_genl_ops_flags {
 };
 
 static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
+	[BATADV_NL_MCGRP_CONFIG] = { .name = BATADV_NL_MCAST_GROUP_CONFIG },
 	[BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER },
 };
 
@@ -138,20 +140,29 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype)
 }
 
 /**
- * batadv_netlink_mesh_info_put() - fill in generic information about mesh
- *  interface
- * @msg: netlink message to be sent back
- * @soft_iface: interface for which the data should be taken
+ * batadv_netlink_mesh_fill() - Fill message with mesh attributes
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @cmd: type of message to generate
+ * @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
  *
- * Return: 0 on success, < 0 on error
+ * Return: 0 on success or negative error number in case of failure
  */
-static int
-batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
+static int batadv_netlink_mesh_fill(struct sk_buff *msg,
+				    struct batadv_priv *bat_priv,
+				    enum batadv_nl_commands cmd,
+				    u32 portid, u32 seq, int flags)
 {
-	struct batadv_priv *bat_priv = netdev_priv(soft_iface);
+	struct net_device *soft_iface = bat_priv->soft_iface;
 	struct batadv_hard_iface *primary_if = NULL;
 	struct net_device *hard_iface;
-	int ret = -ENOBUFS;
+	void *hdr;
+
+	hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
+	if (!hdr)
+		return -ENOBUFS;
 
 	if (nla_put_string(msg, BATADV_ATTR_VERSION, BATADV_SOURCE_VERSION) ||
 	    nla_put_string(msg, BATADV_ATTR_ALGO_NAME,
@@ -162,16 +173,16 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
 		    soft_iface->dev_addr) ||
 	    nla_put_u8(msg, BATADV_ATTR_TT_TTVN,
 		       (u8)atomic_read(&bat_priv->tt.vn)))
-		goto out;
+		goto nla_put_failure;
 
 #ifdef CONFIG_BATMAN_ADV_BLA
 	if (nla_put_u16(msg, BATADV_ATTR_BLA_CRC,
 			ntohs(bat_priv->bla.claim_dest.group)))
-		goto out;
+		goto nla_put_failure;
 #endif
 
 	if (batadv_mcast_mesh_info_put(msg, bat_priv))
-		goto out;
+		goto nla_put_failure;
 
 	primary_if = batadv_primary_if_get_selected(bat_priv);
 	if (primary_if && primary_if->if_status == BATADV_IF_ACTIVE) {
@@ -183,77 +194,95 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
 				   hard_iface->name) ||
 		    nla_put(msg, BATADV_ATTR_HARD_ADDRESS, ETH_ALEN,
 			    hard_iface->dev_addr))
-			goto out;
+			goto nla_put_failure;
 	}
 
-	ret = 0;
+	if (primary_if)
+		batadv_hardif_put(primary_if);
 
- out:
+	genlmsg_end(msg, hdr);
+	return 0;
+
+nla_put_failure:
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
-	return ret;
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
 }
 
 /**
- * batadv_netlink_get_mesh_info() - handle incoming BATADV_CMD_GET_MESH_INFO
- *  netlink request
- * @skb: received netlink message
- * @info: receiver information
+ * batadv_netlink_notify_mesh() - send softif attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
  *
  * Return: 0 on success, < 0 on error
  */
-static int
-batadv_netlink_get_mesh_info(struct sk_buff *skb, struct genl_info *info)
+static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
 {
-	struct net *net = genl_info_net(info);
-	struct net_device *soft_iface;
-	struct sk_buff *msg = NULL;
-	void *msg_head;
-	int ifindex;
+	struct sk_buff *msg;
 	int ret;
 
-	if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
-		return -EINVAL;
-
-	ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
-	if (!ifindex)
-		return -EINVAL;
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
 
-	soft_iface = dev_get_by_index(net, ifindex);
-	if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
-		ret = -ENODEV;
-		goto out;
+	ret = batadv_netlink_mesh_fill(msg, bat_priv, BATADV_CMD_SET_MESH,
+				       0, 0, 0);
+	if (ret < 0) {
+		nlmsg_free(msg);
+		return ret;
 	}
 
-	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
-	if (!msg) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	genlmsg_multicast_netns(&batadv_netlink_family,
+				dev_net(bat_priv->soft_iface), msg, 0,
+				BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
 
-	msg_head = genlmsg_put(msg, info->snd_portid, info->snd_seq,
-			       &batadv_netlink_family, 0,
-			       BATADV_CMD_GET_MESH_INFO);
-	if (!msg_head) {
-		ret = -ENOBUFS;
-		goto out;
-	}
+	return 0;
+}
 
-	ret = batadv_netlink_mesh_info_put(msg, soft_iface);
+/**
+ * batadv_netlink_get_mesh() - Get softif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+	struct batadv_priv *bat_priv = info->user_ptr[0];
+	struct sk_buff *msg;
+	int ret;
 
- out:
-	if (soft_iface)
-		dev_put(soft_iface);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
 
-	if (ret) {
-		if (msg)
-			nlmsg_free(msg);
+	ret = batadv_netlink_mesh_fill(msg, bat_priv, BATADV_CMD_GET_MESH,
+				       info->snd_portid, info->snd_seq, 0);
+	if (ret < 0) {
+		nlmsg_free(msg);
 		return ret;
 	}
 
-	genlmsg_end(msg, msg_head);
-	return genlmsg_reply(msg, info);
+	ret = genlmsg_reply(msg, info);
+
+	return ret;
+}
+
+/**
+ * batadv_netlink_set_mesh() - Set softif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+	struct batadv_priv *bat_priv = info->user_ptr[0];
+
+	batadv_netlink_notify_mesh(bat_priv);
+
+	return 0;
 }
 
 /**
@@ -600,10 +629,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
 
 static const struct genl_ops batadv_netlink_ops[] = {
 	{
-		.cmd = BATADV_CMD_GET_MESH_INFO,
-		.flags = GENL_ADMIN_PERM,
+		.cmd = BATADV_CMD_GET_MESH,
+		/* can be retrieved by unprivileged users */
 		.policy = batadv_netlink_policy,
-		.doit = batadv_netlink_get_mesh_info,
+		.doit = batadv_netlink_get_mesh,
+		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
 	{
 		.cmd = BATADV_CMD_TP_METER,
@@ -685,7 +715,13 @@ static const struct genl_ops batadv_netlink_ops[] = {
 		.policy = batadv_netlink_policy,
 		.dumpit = batadv_mcast_flags_dump,
 	},
-
+	{
+		.cmd = BATADV_CMD_SET_MESH,
+		.flags = GENL_ADMIN_PERM,
+		.policy = batadv_netlink_policy,
+		.doit = batadv_netlink_set_mesh,
+		.internal_flags = BATADV_FLAG_NEED_MESH,
+	},
 };
 
 struct genl_family batadv_netlink_family __ro_after_init = {
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 05/21] batman-adv: Prepare framework for hardif genl config

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.

Beside the mesh/soft-interface specific configuration, the
slave/hard-interface have B.A.T.M.A.N. V specific configuration settings.
The genl interface reflects this by allowing to get/set it using the
hard-interface specific commands.

The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is
reused as get command because it already allow sto dump the content of
other information from the slave/hard-interface which are not yet
configuration specific.

The set command BATADV_CMD_SET_HARDIF will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF
command message type that settings might have been changed and what the
current values are.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  16 ++-
 net/batman-adv/netlink.c        | 240 ++++++++++++++++++++++++++++++++++++----
 2 files changed, 233 insertions(+), 23 deletions(-)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b3394aac9a88..62456a087ef6 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -398,9 +398,15 @@ enum batadv_nl_commands {
 	BATADV_CMD_GET_ROUTING_ALGOS,
 
 	/**
-	 * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+	 * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the
+	 *  current softif
 	 */
-	BATADV_CMD_GET_HARDIFS,
+	BATADV_CMD_GET_HARDIF,
+
+	/**
+	 * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF
+	 */
+	BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF,
 
 	/**
 	 * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
@@ -453,6 +459,12 @@ enum batadv_nl_commands {
 	 */
 	BATADV_CMD_SET_MESH,
 
+	/**
+	 * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the
+	 *  current softif
+	 */
+	BATADV_CMD_SET_HARDIF,
+
 	/* add new commands above here */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 179cc7cfcb70..a184e4225fb5 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -21,6 +21,7 @@
 
 #include <linux/atomic.h>
 #include <linux/bitops.h>
+#include <linux/bug.h>
 #include <linux/byteorder/generic.h>
 #include <linux/cache.h>
 #include <linux/err.h>
@@ -76,6 +77,13 @@ enum batadv_genl_ops_flags {
 	 *  saved in info->user_ptr[0]
 	 */
 	BATADV_FLAG_NEED_MESH = BIT(0),
+
+	/**
+	 * @BATADV_FLAG_NEED_HARDIF: request requires valid hard interface in
+	 *  attribute BATADV_ATTR_HARD_IFINDEX and expects a pointer to it to be
+	 *  saved in info->user_ptr[1]
+	 */
+	BATADV_FLAG_NEED_HARDIF = BIT(1),
 };
 
 static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
@@ -446,29 +454,38 @@ batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info)
 }
 
 /**
- * batadv_netlink_dump_hardif_entry() - Dump one hard interface into a message
+ * batadv_netlink_hardif_fill() - Fill message with hardif attributes
  * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @hard_iface: hard interface which was modified
+ * @cmd: type of message to generate
  * @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
  * @cb: Control block containing additional options
- * @hard_iface: Hard interface to dump
  *
- * Return: error code, or 0 on success
+ * Return: 0 on success or negative error number in case of failure
  */
-static int
-batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid,
-				 struct netlink_callback *cb,
-				 struct batadv_hard_iface *hard_iface)
+static int batadv_netlink_hardif_fill(struct sk_buff *msg,
+				      struct batadv_priv *bat_priv,
+				      struct batadv_hard_iface *hard_iface,
+				      enum batadv_nl_commands cmd,
+				      u32 portid, u32 seq, int flags,
+				      struct netlink_callback *cb)
 {
 	struct net_device *net_dev = hard_iface->net_dev;
 	void *hdr;
 
-	hdr = genlmsg_put(msg, portid, cb->nlh->nlmsg_seq,
-			  &batadv_netlink_family, NLM_F_MULTI,
-			  BATADV_CMD_GET_HARDIFS);
+	hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
 	if (!hdr)
-		return -EMSGSIZE;
+		return -ENOBUFS;
+
+	if (cb)
+		genl_dump_check_consistent(cb, hdr);
 
-	genl_dump_check_consistent(cb, hdr);
+	if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX,
+			bat_priv->soft_iface->ifindex))
+		goto nla_put_failure;
 
 	if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
 			net_dev->ifindex) ||
@@ -486,24 +503,107 @@ batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid,
 	genlmsg_end(msg, hdr);
 	return 0;
 
- nla_put_failure:
+nla_put_failure:
 	genlmsg_cancel(msg, hdr);
 	return -EMSGSIZE;
 }
 
 /**
- * batadv_netlink_dump_hardifs() - Dump all hard interface into a messages
+ * batadv_netlink_notify_hardif() - send hardif attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
+ * @hard_iface: hard interface which was modified
+ *
+ * Return: 0 on success, < 0 on error
+ */
+static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+					struct batadv_hard_iface *hard_iface)
+{
+	struct sk_buff *msg;
+	int ret;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	ret = batadv_netlink_hardif_fill(msg, bat_priv, hard_iface,
+					 BATADV_CMD_SET_HARDIF, 0, 0, 0, NULL);
+	if (ret < 0) {
+		nlmsg_free(msg);
+		return ret;
+	}
+
+	genlmsg_multicast_netns(&batadv_netlink_family,
+				dev_net(bat_priv->soft_iface), msg, 0,
+				BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
+
+	return 0;
+}
+
+/**
+ * batadv_netlink_get_hardif() - Get hardif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_hardif(struct sk_buff *skb,
+				     struct genl_info *info)
+{
+	struct batadv_hard_iface *hard_iface = info->user_ptr[1];
+	struct batadv_priv *bat_priv = info->user_ptr[0];
+	struct sk_buff *msg;
+	int ret;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	ret = batadv_netlink_hardif_fill(msg, bat_priv, hard_iface,
+					 BATADV_CMD_GET_HARDIF,
+					 info->snd_portid, info->snd_seq, 0,
+					 NULL);
+	if (ret < 0) {
+		nlmsg_free(msg);
+		return ret;
+	}
+
+	ret = genlmsg_reply(msg, info);
+
+	return ret;
+}
+
+/**
+ * batadv_netlink_set_hardif() - Set hardif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_hardif(struct sk_buff *skb,
+				     struct genl_info *info)
+{
+	struct batadv_hard_iface *hard_iface = info->user_ptr[1];
+	struct batadv_priv *bat_priv = info->user_ptr[0];
+
+	batadv_netlink_notify_hardif(bat_priv, hard_iface);
+
+	return 0;
+}
+
+/**
+ * batadv_netlink_dump_hardif() - Dump all hard interface into a messages
  * @msg: Netlink message to dump into
  * @cb: Parameters from query
  *
  * Return: error code, or length of reply message on success
  */
 static int
-batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
+batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb)
 {
 	struct net *net = sock_net(cb->skb->sk);
 	struct net_device *soft_iface;
 	struct batadv_hard_iface *hard_iface;
+	struct batadv_priv *bat_priv;
 	int ifindex;
 	int portid = NETLINK_CB(cb->skb).portid;
 	int skip = cb->args[0];
@@ -523,6 +623,8 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
 		return -ENODEV;
 	}
 
+	bat_priv = netdev_priv(soft_iface);
+
 	rtnl_lock();
 	cb->seq = batadv_hardif_generation << 1 | 1;
 
@@ -533,8 +635,10 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
 		if (i++ < skip)
 			continue;
 
-		if (batadv_netlink_dump_hardif_entry(msg, portid, cb,
-						     hard_iface)) {
+		if (batadv_netlink_hardif_fill(msg, bat_priv, hard_iface,
+					       BATADV_CMD_GET_HARDIF,
+					       portid, cb->nlh->nlmsg_seq,
+					       NLM_F_MULTI, cb)) {
 			i--;
 			break;
 		}
@@ -584,6 +688,52 @@ batadv_get_softif_from_info(struct net *net, struct genl_info *info)
 }
 
 /**
+ * batadv_get_hardif_from_info() - Retrieve hardif from genl attributes
+ * @bat_priv: the bat priv with all the soft interface information
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to hard interface (with increased refcnt) on success, error
+ *  pointer on error
+ */
+static struct batadv_hard_iface *
+batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net,
+			    struct genl_info *info)
+{
+	struct batadv_hard_iface *hard_iface;
+	struct net_device *hard_dev;
+	unsigned int hardif_index;
+
+	if (!info->attrs[BATADV_ATTR_HARD_IFINDEX])
+		return ERR_PTR(-EINVAL);
+
+	hardif_index = nla_get_u32(info->attrs[BATADV_ATTR_HARD_IFINDEX]);
+
+	hard_dev = dev_get_by_index(net, hardif_index);
+	if (!hard_dev)
+		return ERR_PTR(-ENODEV);
+
+	hard_iface = batadv_hardif_get_by_netdev(hard_dev);
+	if (!hard_iface)
+		goto err_put_harddev;
+
+	if (hard_iface->soft_iface != bat_priv->soft_iface)
+		goto err_put_hardif;
+
+	/* hard_dev is referenced by hard_iface and not needed here */
+	dev_put(hard_dev);
+
+	return hard_iface;
+
+err_put_hardif:
+	batadv_hardif_put(hard_iface);
+err_put_harddev:
+	dev_put(hard_dev);
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
  * batadv_pre_doit() - Prepare batman-adv genl doit request
  * @ops: requested netlink operation
  * @skb: Netlink message with request data
@@ -595,8 +745,21 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
 			   struct genl_info *info)
 {
 	struct net *net = genl_info_net(info);
+	struct batadv_hard_iface *hard_iface;
+	struct batadv_priv *bat_priv = NULL;
 	struct net_device *soft_iface;
-	struct batadv_priv *bat_priv;
+	u8 user_ptr1_flags;
+	u8 mesh_dep_flags;
+	int ret;
+
+	user_ptr1_flags = BATADV_FLAG_NEED_HARDIF;
+	if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1))
+		return -EINVAL;
+
+	mesh_dep_flags = BATADV_FLAG_NEED_HARDIF;
+	if (WARN_ON((ops->internal_flags & mesh_dep_flags) &&
+		    (~ops->internal_flags & BATADV_FLAG_NEED_MESH)))
+		return -EINVAL;
 
 	if (ops->internal_flags & BATADV_FLAG_NEED_MESH) {
 		soft_iface = batadv_get_softif_from_info(net, info);
@@ -607,7 +770,23 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
 		info->user_ptr[0] = bat_priv;
 	}
 
+	if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF) {
+		hard_iface = batadv_get_hardif_from_info(bat_priv, net, info);
+		if (IS_ERR(hard_iface)) {
+			ret = PTR_ERR(hard_iface);
+			goto err_put_softif;
+		}
+
+		info->user_ptr[1] = hard_iface;
+	}
+
 	return 0;
+
+err_put_softif:
+	if (bat_priv)
+		dev_put(bat_priv->soft_iface);
+
+	return ret;
 }
 
 /**
@@ -619,8 +798,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
 static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
 			     struct genl_info *info)
 {
+	struct batadv_hard_iface *hard_iface;
 	struct batadv_priv *bat_priv;
 
+	if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF &&
+	    info->user_ptr[1]) {
+		hard_iface = info->user_ptr[1];
+
+		batadv_hardif_put(hard_iface);
+	}
+
 	if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
 		bat_priv = info->user_ptr[0];
 		dev_put(bat_priv->soft_iface);
@@ -656,10 +843,13 @@ static const struct genl_ops batadv_netlink_ops[] = {
 		.dumpit = batadv_algo_dump,
 	},
 	{
-		.cmd = BATADV_CMD_GET_HARDIFS,
-		.flags = GENL_ADMIN_PERM,
+		.cmd = BATADV_CMD_GET_HARDIF,
+		/* can be retrieved by unprivileged users */
 		.policy = batadv_netlink_policy,
-		.dumpit = batadv_netlink_dump_hardifs,
+		.dumpit = batadv_netlink_dump_hardif,
+		.doit = batadv_netlink_get_hardif,
+		.internal_flags = BATADV_FLAG_NEED_MESH |
+				  BATADV_FLAG_NEED_HARDIF,
 	},
 	{
 		.cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL,
@@ -722,6 +912,14 @@ static const struct genl_ops batadv_netlink_ops[] = {
 		.doit = batadv_netlink_set_mesh,
 		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
+	{
+		.cmd = BATADV_CMD_SET_HARDIF,
+		.flags = GENL_ADMIN_PERM,
+		.policy = batadv_netlink_policy,
+		.doit = batadv_netlink_set_hardif,
+		.internal_flags = BATADV_FLAG_NEED_MESH |
+				  BATADV_FLAG_NEED_HARDIF,
+	},
 };
 
 struct genl_family batadv_netlink_family __ro_after_init = {
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 06/21] batman-adv: Prepare framework for vlan genl config

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.

Beside the mesh/soft-interface specific configuration, the VLANs on top of
the mesh/soft-interface have configuration settings. The genl interface
reflects this by allowing to get/set it using the vlan specific commands
BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN.

The set command BATADV_CMD_SET_MESH will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command
message type that settings might have been changed and what the current
values are.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  17 ++++
 net/batman-adv/netlink.c        | 191 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 206 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 62456a087ef6..10f3cc34fe16 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -345,6 +345,11 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_MCAST_FLAGS_PRIV,
 
+	/**
+	 * @BATADV_ATTR_VLANID: VLAN id on top of soft interface
+	 */
+	BATADV_ATTR_VLANID,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
@@ -465,6 +470,18 @@ enum batadv_nl_commands {
 	 */
 	BATADV_CMD_SET_HARDIF,
 
+	/**
+	 * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the
+	 *  current softif
+	 */
+	BATADV_CMD_GET_VLAN,
+
+	/**
+	 * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the
+	 *  current softif
+	 */
+	BATADV_CMD_SET_VLAN,
+
 	/* add new commands above here */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index a184e4225fb5..d40913bb9031 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -30,6 +30,7 @@
 #include <linux/genetlink.h>
 #include <linux/gfp.h>
 #include <linux/if_ether.h>
+#include <linux/if_vlan.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
@@ -84,6 +85,13 @@ enum batadv_genl_ops_flags {
 	 *  saved in info->user_ptr[1]
 	 */
 	BATADV_FLAG_NEED_HARDIF = BIT(1),
+
+	/**
+	 * @BATADV_FLAG_NEED_VLAN: request requires valid vlan in
+	 *  attribute BATADV_ATTR_VLANID and expects a pointer to it to be
+	 *  saved in info->user_ptr[1]
+	 */
+	BATADV_FLAG_NEED_VLAN = BIT(2),
 };
 
 static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
@@ -130,6 +138,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_DAT_CACHE_VID]		= { .type = NLA_U16 },
 	[BATADV_ATTR_MCAST_FLAGS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_MCAST_FLAGS_PRIV]		= { .type = NLA_U32 },
+	[BATADV_ATTR_VLANID]			= { .type = NLA_U16 },
 };
 
 /**
@@ -654,6 +663,123 @@ batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb)
 }
 
 /**
+ * batadv_netlink_vlan_fill() - Fill message with vlan attributes
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vlan: vlan which was modified
+ * @cmd: type of message to generate
+ * @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_vlan_fill(struct sk_buff *msg,
+				    struct batadv_priv *bat_priv,
+				    struct batadv_softif_vlan *vlan,
+				    enum batadv_nl_commands cmd,
+				    u32 portid, u32 seq, int flags)
+{
+	void *hdr;
+
+	hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
+	if (!hdr)
+		return -ENOBUFS;
+
+	if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX,
+			bat_priv->soft_iface->ifindex))
+		goto nla_put_failure;
+
+	if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
+		goto nla_put_failure;
+
+	genlmsg_end(msg, hdr);
+	return 0;
+
+nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
+}
+
+/**
+ * batadv_netlink_notify_vlan() - send vlan attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vlan: vlan which was modified
+ *
+ * Return: 0 on success, < 0 on error
+ */
+static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+				      struct batadv_softif_vlan *vlan)
+{
+	struct sk_buff *msg;
+	int ret;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	ret = batadv_netlink_vlan_fill(msg, bat_priv, vlan,
+				       BATADV_CMD_SET_VLAN, 0, 0, 0);
+	if (ret < 0) {
+		nlmsg_free(msg);
+		return ret;
+	}
+
+	genlmsg_multicast_netns(&batadv_netlink_family,
+				dev_net(bat_priv->soft_iface), msg, 0,
+				BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
+
+	return 0;
+}
+
+/**
+ * batadv_netlink_get_vlan() - Get vlan attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_vlan(struct sk_buff *skb, struct genl_info *info)
+{
+	struct batadv_softif_vlan *vlan = info->user_ptr[1];
+	struct batadv_priv *bat_priv = info->user_ptr[0];
+	struct sk_buff *msg;
+	int ret;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	ret = batadv_netlink_vlan_fill(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN,
+				       info->snd_portid, info->snd_seq, 0);
+	if (ret < 0) {
+		nlmsg_free(msg);
+		return ret;
+	}
+
+	ret = genlmsg_reply(msg, info);
+
+	return ret;
+}
+
+/**
+ * batadv_netlink_set_vlan() - Get vlan attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info)
+{
+	struct batadv_softif_vlan *vlan = info->user_ptr[1];
+	struct batadv_priv *bat_priv = info->user_ptr[0];
+
+	batadv_netlink_notify_vlan(bat_priv, vlan);
+
+	return 0;
+}
+
+/**
  * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes
  * @net: the applicable net namespace
  * @info: receiver information
@@ -734,6 +860,34 @@ batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net,
 }
 
 /**
+ * batadv_get_vlan_from_info() - Retrieve vlan from genl attributes
+ * @bat_priv: the bat priv with all the soft interface information
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to vlan on success (with increased refcnt), error pointer
+ *  on error
+ */
+static struct batadv_softif_vlan *
+batadv_get_vlan_from_info(struct batadv_priv *bat_priv, struct net *net,
+			  struct genl_info *info)
+{
+	struct batadv_softif_vlan *vlan;
+	u16 vid;
+
+	if (!info->attrs[BATADV_ATTR_VLANID])
+		return ERR_PTR(-EINVAL);
+
+	vid = nla_get_u16(info->attrs[BATADV_ATTR_VLANID]);
+
+	vlan = batadv_softif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG);
+	if (!vlan)
+		return ERR_PTR(-ENOENT);
+
+	return vlan;
+}
+
+/**
  * batadv_pre_doit() - Prepare batman-adv genl doit request
  * @ops: requested netlink operation
  * @skb: Netlink message with request data
@@ -747,16 +901,17 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
 	struct net *net = genl_info_net(info);
 	struct batadv_hard_iface *hard_iface;
 	struct batadv_priv *bat_priv = NULL;
+	struct batadv_softif_vlan *vlan;
 	struct net_device *soft_iface;
 	u8 user_ptr1_flags;
 	u8 mesh_dep_flags;
 	int ret;
 
-	user_ptr1_flags = BATADV_FLAG_NEED_HARDIF;
+	user_ptr1_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN;
 	if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1))
 		return -EINVAL;
 
-	mesh_dep_flags = BATADV_FLAG_NEED_HARDIF;
+	mesh_dep_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN;
 	if (WARN_ON((ops->internal_flags & mesh_dep_flags) &&
 		    (~ops->internal_flags & BATADV_FLAG_NEED_MESH)))
 		return -EINVAL;
@@ -780,6 +935,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
 		info->user_ptr[1] = hard_iface;
 	}
 
+	if (ops->internal_flags & BATADV_FLAG_NEED_VLAN) {
+		vlan = batadv_get_vlan_from_info(bat_priv, net, info);
+		if (IS_ERR(vlan)) {
+			ret = PTR_ERR(vlan);
+			goto err_put_softif;
+		}
+
+		info->user_ptr[1] = vlan;
+	}
+
 	return 0;
 
 err_put_softif:
@@ -799,6 +964,7 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
 			     struct genl_info *info)
 {
 	struct batadv_hard_iface *hard_iface;
+	struct batadv_softif_vlan *vlan;
 	struct batadv_priv *bat_priv;
 
 	if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF &&
@@ -808,6 +974,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
 		batadv_hardif_put(hard_iface);
 	}
 
+	if (ops->internal_flags & BATADV_FLAG_NEED_VLAN && info->user_ptr[1]) {
+		vlan = info->user_ptr[1];
+		batadv_softif_vlan_put(vlan);
+	}
+
 	if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
 		bat_priv = info->user_ptr[0];
 		dev_put(bat_priv->soft_iface);
@@ -920,6 +1091,22 @@ static const struct genl_ops batadv_netlink_ops[] = {
 		.internal_flags = BATADV_FLAG_NEED_MESH |
 				  BATADV_FLAG_NEED_HARDIF,
 	},
+	{
+		.cmd = BATADV_CMD_GET_VLAN,
+		/* can be retrieved by unprivileged users */
+		.policy = batadv_netlink_policy,
+		.doit = batadv_netlink_get_vlan,
+		.internal_flags = BATADV_FLAG_NEED_MESH |
+				  BATADV_FLAG_NEED_VLAN,
+	},
+	{
+		.cmd = BATADV_CMD_SET_VLAN,
+		.flags = GENL_ADMIN_PERM,
+		.policy = batadv_netlink_policy,
+		.doit = batadv_netlink_set_vlan,
+		.internal_flags = BATADV_FLAG_NEED_MESH |
+				  BATADV_FLAG_NEED_VLAN,
+	},
 };
 
 struct genl_family batadv_netlink_family __ro_after_init = {
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 07/21] batman-adv: Add aggregated_ogms mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh interface can delay OGM messages to aggregate different ogms
together in a single OGM packet.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 12 ++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 10f3cc34fe16..f8941e80d6b4 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -350,6 +350,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_VLANID,
 
+	/**
+	 * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol
+	 *  messages of the mesh interface shall be aggregated or not.
+	 */
+	BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index d40913bb9031..82665dc2eb2b 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -139,6 +139,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_MCAST_FLAGS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_MCAST_FLAGS_PRIV]		= { .type = NLA_U32 },
 	[BATADV_ATTR_VLANID]			= { .type = NLA_U16 },
+	[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**
@@ -214,6 +215,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 			goto nla_put_failure;
 	}
 
+	if (nla_put_u8(msg, BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+		       !!atomic_read(&bat_priv->aggregated_ogms)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -296,6 +301,13 @@ static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info)
 static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 {
 	struct batadv_priv *bat_priv = info->user_ptr[0];
+	struct nlattr *attr;
+
+	if (info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED];
+
+		atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr));
+	}
 
 	batadv_netlink_notify_mesh(bat_priv);
 
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 08/21] batman-adv: Add ap_isolation mesh/vlan genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh interface can drop messages between clients to implement a
mesh-wide AP isolation.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and
BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.

This feature also requires that skbuff which should be handled as isolated
are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to
set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK
and BATADV_ATTR_ISOLATION_MASK.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h | 19 +++++++++
 net/batman-adv/netlink.c        | 89 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 108 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f8941e80d6b4..a4dadafe08dd 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -356,6 +356,25 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going
+	 *  from a wireless client to another wireless client will be silently
+	 *  dropped.
+	 */
+	BATADV_ATTR_AP_ISOLATION_ENABLED,
+
+	/**
+	 * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to
+	 *  classify clients as "isolated" by the Extended Isolation feature.
+	 */
+	BATADV_ATTR_ISOLATION_MARK,
+
+	/**
+	 * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to
+	 *  classify clients as "isolated" by the Extended Isolation feature.
+	 */
+	BATADV_ATTR_ISOLATION_MASK,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 82665dc2eb2b..fc80f003ed6e 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -140,6 +140,9 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_MCAST_FLAGS_PRIV]		= { .type = NLA_U32 },
 	[BATADV_ATTR_VLANID]			= { .type = NLA_U16 },
 	[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_AP_ISOLATION_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_ISOLATION_MARK]		= { .type = NLA_U32 },
+	[BATADV_ATTR_ISOLATION_MASK]		= { .type = NLA_U32 },
 };
 
 /**
@@ -158,6 +161,52 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype)
 }
 
 /**
+ * batadv_netlink_mesh_fill_ap_isolation() - Add ap_isolation softif attribute
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_mesh_fill_ap_isolation(struct sk_buff *msg,
+						 struct batadv_priv *bat_priv)
+{
+	struct batadv_softif_vlan *vlan;
+	u8 ap_isolation;
+
+	vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+	if (!vlan)
+		return 0;
+
+	ap_isolation = atomic_read(&vlan->ap_isolation);
+	batadv_softif_vlan_put(vlan);
+
+	return nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED,
+			  !!ap_isolation);
+}
+
+/**
+ * batadv_option_set_ap_isolation() - Set ap_isolation from genl msg
+ * @attr: parsed BATADV_ATTR_AP_ISOLATION_ENABLED attribute
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_mesh_ap_isolation(struct nlattr *attr,
+						struct batadv_priv *bat_priv)
+{
+	struct batadv_softif_vlan *vlan;
+
+	vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+	if (!vlan)
+		return -ENOENT;
+
+	atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr));
+	batadv_softif_vlan_put(vlan);
+
+	return 0;
+}
+
+/**
  * batadv_netlink_mesh_fill() - Fill message with mesh attributes
  * @msg: Netlink message to dump into
  * @bat_priv: the bat priv with all the soft interface information
@@ -219,6 +268,17 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		       !!atomic_read(&bat_priv->aggregated_ogms)))
 		goto nla_put_failure;
 
+	if (batadv_netlink_mesh_fill_ap_isolation(msg, bat_priv))
+		goto nla_put_failure;
+
+	if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MARK,
+			bat_priv->isolation_mark))
+		goto nla_put_failure;
+
+	if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MASK,
+			bat_priv->isolation_mark_mask))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -309,6 +369,24 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr));
 	}
 
+	if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED];
+
+		batadv_netlink_set_mesh_ap_isolation(attr, bat_priv);
+	}
+
+	if (info->attrs[BATADV_ATTR_ISOLATION_MARK]) {
+		attr = info->attrs[BATADV_ATTR_ISOLATION_MARK];
+
+		bat_priv->isolation_mark = nla_get_u32(attr);
+	}
+
+	if (info->attrs[BATADV_ATTR_ISOLATION_MASK]) {
+		attr = info->attrs[BATADV_ATTR_ISOLATION_MASK];
+
+		bat_priv->isolation_mark_mask = nla_get_u32(attr);
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
@@ -705,6 +783,10 @@ static int batadv_netlink_vlan_fill(struct sk_buff *msg,
 	if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
 		goto nla_put_failure;
 
+	if (nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED,
+		       !!atomic_read(&vlan->ap_isolation)))
+		goto nla_put_failure;
+
 	genlmsg_end(msg, hdr);
 	return 0;
 
@@ -785,6 +867,13 @@ static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info)
 {
 	struct batadv_softif_vlan *vlan = info->user_ptr[1];
 	struct batadv_priv *bat_priv = info->user_ptr[0];
+	struct nlattr *attr;
+
+	if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED];
+
+		atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr));
+	}
 
 	batadv_netlink_notify_vlan(bat_priv, vlan);
 
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 09/21] batman-adv: Add bonding mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh interface can use multiple slave/hard-interface ports at the same
time to transport the traffic to other nodes.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_BONDING_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 11 +++++++++++
 2 files changed, 17 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a4dadafe08dd..f74ff261ec8f 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -375,6 +375,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_ISOLATION_MASK,
 
+	/**
+	 * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through
+	 *  the mesh will be sent using multiple interfaces at the same time.
+	 */
+	BATADV_ATTR_BONDING_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index fc80f003ed6e..310a2c339fd1 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -143,6 +143,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_AP_ISOLATION_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_ISOLATION_MARK]		= { .type = NLA_U32 },
 	[BATADV_ATTR_ISOLATION_MASK]		= { .type = NLA_U32 },
+	[BATADV_ATTR_BONDING_ENABLED]		= { .type = NLA_U8 },
 };
 
 /**
@@ -279,6 +280,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 			bat_priv->isolation_mark_mask))
 		goto nla_put_failure;
 
+	if (nla_put_u8(msg, BATADV_ATTR_BONDING_ENABLED,
+		       !!atomic_read(&bat_priv->bonding)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -387,6 +392,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		bat_priv->isolation_mark_mask = nla_get_u32(attr);
 	}
 
+	if (info->attrs[BATADV_ATTR_BONDING_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_BONDING_ENABLED];
+
+		atomic_set(&bat_priv->bonding, !!nla_get_u8(attr));
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 10/21] batman-adv: Add bridge_loop_avoidance mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh interface can try to detect loops in the same mesh caused by
(indirectly) bridged mesh/soft-interfaces of different nodes. Some of the
loops can also be resolved without breaking the mesh.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero
will disable this feature and setting it to something else is enabling this
feature.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  7 +++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f74ff261ec8f..3cb35c661056 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -381,6 +381,13 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_BONDING_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop
+	 *  avoidance feature is enabled. This feature detects and avoids loops
+	 *  between the mesh and devices bridged with the soft interface
+	 */
+	BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 310a2c339fd1..40c940da9498 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -144,6 +144,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_ISOLATION_MARK]		= { .type = NLA_U32 },
 	[BATADV_ATTR_ISOLATION_MASK]		= { .type = NLA_U32 },
 	[BATADV_ATTR_BONDING_ENABLED]		= { .type = NLA_U8 },
+	[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**
@@ -284,6 +285,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		       !!atomic_read(&bat_priv->bonding)))
 		goto nla_put_failure;
 
+#ifdef CONFIG_BATMAN_ADV_BLA
+	if (nla_put_u8(msg, BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+		       !!atomic_read(&bat_priv->bridge_loop_avoidance)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_BLA */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -398,6 +405,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		atomic_set(&bat_priv->bonding, !!nla_get_u8(attr));
 	}
 
+#ifdef CONFIG_BATMAN_ADV_BLA
+	if (info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED];
+
+		atomic_set(&bat_priv->bridge_loop_avoidance,
+			   !!nla_get_u8(attr));
+		batadv_bla_status_update(bat_priv->soft_iface);
+	}
+#endif /* CONFIG_BATMAN_ADV_BLA */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 11/21] batman-adv: Add distributed_arp_table mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh interface can use a distributed hash table to answer ARP requests
without flooding the request through the whole mesh.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero
will disable this feature and setting it to something else is enabling this
feature.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  8 ++++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 3cb35c661056..f303a1496476 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -388,6 +388,14 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed
+	 *  arp table feature is enabled. This feature uses a distributed hash
+	 *  table to answer ARP requests without flooding the request through
+	 *  the whole mesh.
+	 */
+	BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 40c940da9498..3028c2a5c782 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -145,6 +145,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_ISOLATION_MASK]		= { .type = NLA_U32 },
 	[BATADV_ATTR_BONDING_ENABLED]		= { .type = NLA_U8 },
 	[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**
@@ -291,6 +292,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_BLA */
 
+#ifdef CONFIG_BATMAN_ADV_DAT
+	if (nla_put_u8(msg, BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+		       !!atomic_read(&bat_priv->distributed_arp_table)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DAT */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -415,6 +422,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_BLA */
 
+#ifdef CONFIG_BATMAN_ADV_DAT
+	if (info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED];
+
+		atomic_set(&bat_priv->distributed_arp_table,
+			   !!nla_get_u8(attr));
+		batadv_dat_status_update(bat_priv->soft_iface);
+	}
+#endif /* CONFIG_BATMAN_ADV_DAT */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 12/21] batman-adv: Add fragmentation mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh interface can fragment unicast packets when the packet size
exceeds the outgoing slave/hard-interface MTU.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  7 +++++++
 net/batman-adv/netlink.c        | 12 ++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f303a1496476..847841b8de5d 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -396,6 +396,13 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going
+	 *  through the mesh will be fragmented or silently discarded if the
+	 *  packet size exceeds the outgoing interface MTU.
+	 */
+	BATADV_ATTR_FRAGMENTATION_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 3028c2a5c782..5b2160d2f482 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -146,6 +146,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_BONDING_ENABLED]		= { .type = NLA_U8 },
 	[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_FRAGMENTATION_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**
@@ -298,6 +299,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_DAT */
 
+	if (nla_put_u8(msg, BATADV_ATTR_FRAGMENTATION_ENABLED,
+		       !!atomic_read(&bat_priv->fragmentation)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -432,6 +437,13 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_DAT */
 
+	if (info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED];
+
+		atomic_set(&bat_priv->fragmentation, !!nla_get_u8(attr));
+		batadv_update_min_mtu(bat_priv->soft_iface);
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 13/21] batman-adv: Add gateway mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh/soft-interface can optimize the handling of DHCP packets. Instead
of flooding them through the whole mesh, it can be forwarded as unicast to
a specific gateway server. The originator which injects the packets in the
mesh has to select (based on sel_class thresholds) a responsible gateway
server. This is done by switching this originator to the gw_mode client.
The servers announce their forwarding bandwidth (download/upload) when the
gw_mode server was selected.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the attributes:

* u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server)
* u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_SEL_CLASS

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h | 40 ++++++++++++++++++
 net/batman-adv/gateway_client.c |  1 -
 net/batman-adv/gateway_common.c |  1 +
 net/batman-adv/gateway_common.h |  6 ---
 net/batman-adv/netlink.c        | 92 +++++++++++++++++++++++++++++++++++++++++
 net/batman-adv/soft-interface.c |  2 +-
 net/batman-adv/sysfs.c          |  1 +
 7 files changed, 135 insertions(+), 8 deletions(-)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 847841b8de5d..165272be6878 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -140,6 +140,20 @@ enum batadv_mcast_flags_priv {
 };
 
 /**
+ * enum batadv_gw_modes - gateway mode of node
+ */
+enum batadv_gw_modes {
+	/** @BATADV_GW_MODE_OFF: gw mode disabled */
+	BATADV_GW_MODE_OFF,
+
+	/** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */
+	BATADV_GW_MODE_CLIENT,
+
+	/** @BATADV_GW_MODE_SERVER: announce itself as gatway server */
+	BATADV_GW_MODE_SERVER,
+};
+
+/**
  * enum batadv_nl_attrs - batman-adv netlink attributes
  */
 enum batadv_nl_attrs {
@@ -403,6 +417,32 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_FRAGMENTATION_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which
+	 *  is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+	 *  to 'server'.
+	 */
+	BATADV_ATTR_GW_BANDWIDTH_DOWN,
+
+	/**
+	 * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which
+	 *  is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+	 *  to 'server'.
+	 */
+	BATADV_ATTR_GW_BANDWIDTH_UP,
+
+	/**
+	 * @BATADV_ATTR_GW_MODE: defines the state of the gateway features.
+	 * Possible values are specified in enum batadv_gw_modes
+	 */
+	BATADV_ATTR_GW_MODE,
+
+	/**
+	 * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node
+	 *  will use to choose a gateway if gw_mode was set to 'client'.
+	 */
+	BATADV_ATTR_GW_SEL_CLASS,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c
index 0a6b9b30eabd..f5811f61aa92 100644
--- a/net/batman-adv/gateway_client.c
+++ b/net/batman-adv/gateway_client.c
@@ -47,7 +47,6 @@
 #include <uapi/linux/batadv_packet.h>
 #include <uapi/linux/batman_adv.h>
 
-#include "gateway_common.h"
 #include "hard-interface.h"
 #include "log.h"
 #include "netlink.h"
diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c
index 53d03adc9bfc..e064de45e22c 100644
--- a/net/batman-adv/gateway_common.c
+++ b/net/batman-adv/gateway_common.c
@@ -28,6 +28,7 @@
 #include <linux/stddef.h>
 #include <linux/string.h>
 #include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
 
 #include "gateway_client.h"
 #include "log.h"
diff --git a/net/batman-adv/gateway_common.h b/net/batman-adv/gateway_common.h
index 89bae100a0b0..128467a0fb89 100644
--- a/net/batman-adv/gateway_common.h
+++ b/net/batman-adv/gateway_common.h
@@ -25,12 +25,6 @@
 
 struct net_device;
 
-enum batadv_gw_modes {
-	BATADV_GW_MODE_OFF,
-	BATADV_GW_MODE_CLIENT,
-	BATADV_GW_MODE_SERVER,
-};
-
 /**
  * enum batadv_bandwidth_units - bandwidth unit types
  */
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 5b2160d2f482..473467afea91 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -51,6 +51,7 @@
 #include "bridge_loop_avoidance.h"
 #include "distributed-arp-table.h"
 #include "gateway_client.h"
+#include "gateway_common.h"
 #include "hard-interface.h"
 #include "multicast.h"
 #include "originator.h"
@@ -147,6 +148,10 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_FRAGMENTATION_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_GW_BANDWIDTH_DOWN]		= { .type = NLA_U32 },
+	[BATADV_ATTR_GW_BANDWIDTH_UP]		= { .type = NLA_U32 },
+	[BATADV_ATTR_GW_MODE]			= { .type = NLA_U8 },
+	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
 };
 
 /**
@@ -303,6 +308,28 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		       !!atomic_read(&bat_priv->fragmentation)))
 		goto nla_put_failure;
 
+	if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_DOWN,
+			atomic_read(&bat_priv->gw.bandwidth_down)))
+		goto nla_put_failure;
+
+	if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_UP,
+			atomic_read(&bat_priv->gw.bandwidth_up)))
+		goto nla_put_failure;
+
+	if (nla_put_u8(msg, BATADV_ATTR_GW_MODE,
+		       atomic_read(&bat_priv->gw.mode)))
+		goto nla_put_failure;
+
+	if (bat_priv->algo_ops->gw.get_best_gw_node &&
+	    bat_priv->algo_ops->gw.is_eligible) {
+		/* GW selection class is not available if the routing algorithm
+		 * in use does not implement the GW API
+		 */
+		if (nla_put_u32(msg, BATADV_ATTR_GW_SEL_CLASS,
+				atomic_read(&bat_priv->gw.sel_class)))
+			goto nla_put_failure;
+	}
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -444,6 +471,71 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		batadv_update_min_mtu(bat_priv->soft_iface);
 	}
 
+	if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]) {
+		attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN];
+
+		atomic_set(&bat_priv->gw.bandwidth_down, nla_get_u32(attr));
+		batadv_gw_tvlv_container_update(bat_priv);
+	}
+
+	if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]) {
+		attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP];
+
+		atomic_set(&bat_priv->gw.bandwidth_up, nla_get_u32(attr));
+		batadv_gw_tvlv_container_update(bat_priv);
+	}
+
+	if (info->attrs[BATADV_ATTR_GW_MODE]) {
+		u8 gw_mode;
+
+		attr = info->attrs[BATADV_ATTR_GW_MODE];
+		gw_mode = nla_get_u8(attr);
+
+		if (gw_mode <= BATADV_GW_MODE_SERVER) {
+			/* Invoking batadv_gw_reselect() is not enough to really
+			 * de-select the current GW. It will only instruct the
+			 * gateway client code to perform a re-election the next
+			 * time that this is needed.
+			 *
+			 * When gw client mode is being switched off the current
+			 * GW must be de-selected explicitly otherwise no GW_ADD
+			 * uevent is thrown on client mode re-activation. This
+			 * is operation is performed in
+			 * batadv_gw_check_client_stop().
+			 */
+			batadv_gw_reselect(bat_priv);
+
+			/* always call batadv_gw_check_client_stop() before
+			 * changing the gateway state
+			 */
+			batadv_gw_check_client_stop(bat_priv);
+			atomic_set(&bat_priv->gw.mode, gw_mode);
+			batadv_gw_tvlv_container_update(bat_priv);
+		}
+	}
+
+	if (info->attrs[BATADV_ATTR_GW_SEL_CLASS] &&
+	    bat_priv->algo_ops->gw.get_best_gw_node &&
+	    bat_priv->algo_ops->gw.is_eligible) {
+		/* setting the GW selection class is allowed only if the routing
+		 * algorithm in use implements the GW API
+		 */
+
+		u32 sel_class_max = 0xffffffffu;
+		u32 sel_class;
+
+		attr = info->attrs[BATADV_ATTR_GW_SEL_CLASS];
+		sel_class = nla_get_u32(attr);
+
+		if (!bat_priv->algo_ops->gw.store_sel_class)
+			sel_class_max = BATADV_TQ_MAX_VALUE;
+
+		if (sel_class >= 1 && sel_class <= sel_class_max) {
+			atomic_set(&bat_priv->gw.sel_class, sel_class);
+			batadv_gw_reselect(bat_priv);
+		}
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index b14fb3462af7..12028c287de5 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -50,13 +50,13 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
 
 #include "bat_algo.h"
 #include "bridge_loop_avoidance.h"
 #include "debugfs.h"
 #include "distributed-arp-table.h"
 #include "gateway_client.h"
-#include "gateway_common.h"
 #include "hard-interface.h"
 #include "multicast.h"
 #include "network-coding.h"
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index e1b816262c53..64fd5932a555 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -40,6 +40,7 @@
 #include <linux/stringify.h>
 #include <linux/workqueue.h>
 #include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
 
 #include "bridge_loop_avoidance.h"
 #include "distributed-arp-table.h"
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 14/21] batman-adv: Add hop_penalty mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced
when they are forwarded. One of the reductions is the penalty for
traversing an additional hop. This hop_penalty (0-255) defines the
percentage of reduction (0-100%).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY
attribute.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 11 +++++++++++
 2 files changed, 17 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 165272be6878..b37cb923332e 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -443,6 +443,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_GW_SEL_CLASS,
 
+	/**
+	 * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied
+	 *  to an originator message's tq-field on every hop.
+	 */
+	BATADV_ATTR_HOP_PENALTY,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 473467afea91..ce6e6f078765 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -152,6 +152,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_BANDWIDTH_UP]		= { .type = NLA_U32 },
 	[BATADV_ATTR_GW_MODE]			= { .type = NLA_U8 },
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
+	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
 };
 
 /**
@@ -330,6 +331,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 			goto nla_put_failure;
 	}
 
+	if (nla_put_u8(msg, BATADV_ATTR_HOP_PENALTY,
+		       atomic_read(&bat_priv->hop_penalty)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -536,6 +541,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		}
 	}
 
+	if (info->attrs[BATADV_ATTR_HOP_PENALTY]) {
+		attr = info->attrs[BATADV_ATTR_HOP_PENALTY];
+
+		atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 15/21] batman-adv: Add log_level mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

In contrast to other modules, batman-adv allows to set the debug message
verbosity per mesh/soft-interface and not per module (via modparam).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL
attribute.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b37cb923332e..6d36e4b47eb4 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -449,6 +449,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_HOP_PENALTY,
 
+	/**
+	 * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+	 *  should be send to the debug log/trace ring buffer
+	 */
+	BATADV_ATTR_LOG_LEVEL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index ce6e6f078765..8c019d46815c 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -53,6 +53,7 @@
 #include "gateway_client.h"
 #include "gateway_common.h"
 #include "hard-interface.h"
+#include "log.h"
 #include "multicast.h"
 #include "originator.h"
 #include "soft-interface.h"
@@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_MODE]			= { .type = NLA_U8 },
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
+	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 };
 
 /**
@@ -335,6 +337,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		       atomic_read(&bat_priv->hop_penalty)))
 		goto nla_put_failure;
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL,
+			atomic_read(&bat_priv->log_level)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
 	}
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (info->attrs[BATADV_ATTR_LOG_LEVEL]) {
+		attr = info->attrs[BATADV_ATTR_LOG_LEVEL];
+
+		atomic_set(&bat_priv->log_level,
+			   nla_get_u32(attr) & BATADV_DBG_ALL);
+	}
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 16/21] batman-adv: Add multicast forceflood mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh interface can optimize the flooding of multicast packets based on
the content of the global translation tables. To disable this behavior and
use the broadcast-like flooding of the packets, forceflood has to be
enabled.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED attribute. Setting the u8 to zero
will disable this feature (allowing multicast optimizations) and setting it
to something else is enabling this feature (forcing simple flooding).

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  9 +++++++++
 net/batman-adv/netlink.c        | 15 +++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 6d36e4b47eb4..38caaaae8a05 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -455,6 +455,15 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_LOG_LEVEL,
 
+	/**
+	 * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast
+	 *  optimizations should be replaced by simple broadcast-like flooding
+	 *  of multicast packets. If set to non-zero then all nodes in the mesh
+	 *  are going to use classic flooding for any multicast packet with no
+	 *  optimizations.
+	 */
+	BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8c019d46815c..475bd15f806c 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -155,6 +155,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
 	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
+	[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**
@@ -343,6 +344,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_DEBUG */
 
+#ifdef CONFIG_BATMAN_ADV_MCAST
+	if (nla_put_u8(msg, BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
+		       !atomic_read(&bat_priv->multicast_mode)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_MCAST */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -564,6 +571,14 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_DEBUG */
 
+#ifdef CONFIG_BATMAN_ADV_MCAST
+	if (info->attrs[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED];
+
+		atomic_set(&bat_priv->multicast_mode, !nla_get_u8(attr));
+	}
+#endif /* CONFIG_BATMAN_ADV_MCAST */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 17/21] batman-adv: Add network_coding mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The mesh interface can use (in an homogeneous mesh) network coding, a
mechanism that aims to increase the overall network throughput by fusing
multiple packets in one transmission.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  7 +++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 38caaaae8a05..a4239c147bde 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -464,6 +464,13 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using
+	 *  some magic to send fewer wifi packets but still the same content) is
+	 *  enabled or not.
+	 */
+	BATADV_ATTR_NETWORK_CODING_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 475bd15f806c..6f01f92e6ab3 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -55,6 +55,7 @@
 #include "hard-interface.h"
 #include "log.h"
 #include "multicast.h"
+#include "network-coding.h"
 #include "originator.h"
 #include "soft-interface.h"
 #include "tp_meter.h"
@@ -156,6 +157,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
 	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 	[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_NETWORK_CODING_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**
@@ -350,6 +352,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_MCAST */
 
+#ifdef CONFIG_BATMAN_ADV_NC
+	if (nla_put_u8(msg, BATADV_ATTR_NETWORK_CODING_ENABLED,
+		       !!atomic_read(&bat_priv->network_coding)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_NC */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -579,6 +587,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_MCAST */
 
+#ifdef CONFIG_BATMAN_ADV_NC
+	if (info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED];
+
+		atomic_set(&bat_priv->network_coding, !!nla_get_u8(attr));
+		batadv_nc_status_update(bat_priv->soft_iface);
+	}
+#endif /* CONFIG_BATMAN_ADV_NC */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 18/21] batman-adv: Add orig_interval mesh genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The OGM packets are transmitted every orig_interval milliseconds. This
value can be changed using the configuration interface.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 BATADV_ATTR_ORIG_INTERVAL
attribute.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a4239c147bde..6bedd4889c37 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -471,6 +471,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_NETWORK_CODING_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in
+	 *  which batman sends its protocol messages.
+	 */
+	BATADV_ATTR_ORIG_INTERVAL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 6f01f92e6ab3..e25c139ba0e1 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -158,6 +158,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 	[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_NETWORK_CODING_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_ORIG_INTERVAL]		= { .type = NLA_U32 },
 };
 
 /**
@@ -358,6 +359,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_NC */
 
+	if (nla_put_u32(msg, BATADV_ATTR_ORIG_INTERVAL,
+			atomic_read(&bat_priv->orig_interval)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -596,6 +601,18 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_NC */
 
+	if (info->attrs[BATADV_ATTR_ORIG_INTERVAL]) {
+		u32 orig_interval;
+
+		attr = info->attrs[BATADV_ATTR_ORIG_INTERVAL];
+		orig_interval = nla_get_u32(attr);
+
+		orig_interval = min_t(u32, orig_interval, INT_MAX);
+		orig_interval = max_t(u32, orig_interval, 2 * BATADV_JITTER);
+
+		atomic_set(&bat_priv->orig_interval, orig_interval);
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 19/21] batman-adv: Add elp_interval hardif genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The ELP packets are transmitted every elp_interval milliseconds on an
slave/hard-interface. This value can be changed using the configuration
interface.

The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get
the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL
attribute.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 6bedd4889c37..f966e497361b 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -477,6 +477,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_ORIG_INTERVAL,
 
+	/**
+	 * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in
+	 *  which batman emits probing packets for neighbor sensing (ELP).
+	 */
+	BATADV_ATTR_ELP_INTERVAL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index e25c139ba0e1..09187e6e92a3 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -159,6 +159,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_NETWORK_CODING_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_ORIG_INTERVAL]		= { .type = NLA_U32 },
+	[BATADV_ATTR_ELP_INTERVAL]		= { .type = NLA_U32 },
 };
 
 /**
@@ -825,6 +826,12 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg,
 			goto nla_put_failure;
 	}
 
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+	if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL,
+			atomic_read(&hard_iface->bat_v.elp_interval)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
 	genlmsg_end(msg, hdr);
 	return 0;
 
@@ -910,6 +917,16 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb,
 	struct batadv_hard_iface *hard_iface = info->user_ptr[1];
 	struct batadv_priv *bat_priv = info->user_ptr[0];
 
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+	struct nlattr *attr;
+
+	if (info->attrs[BATADV_ATTR_ELP_INTERVAL]) {
+		attr = info->attrs[BATADV_ATTR_ELP_INTERVAL];
+
+		atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr));
+	}
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
 	batadv_netlink_notify_hardif(bat_priv, hard_iface);
 
 	return 0;
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 20/21] batman-adv: Add throughput_override hardif genl configuration

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The B.A.T.M.A.N. V implementation tries to estimate the link throughput of
an interface to an originator using different automatic methods. It is
still possible to overwrite it the link throughput for all reachable
originators via this interface.

The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get
the configuration of this feature using the u32
BATADV_ATTR_THROUGHPUT_OVERRIDE attribute. The used unit is in 100 Kbit/s.
If the value is set to 0 then batman-adv will try to estimate the
throughput by itself.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 include/uapi/linux/batman_adv.h |  8 ++++++++
 net/batman-adv/netlink.c        | 12 ++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f966e497361b..305bf316dd03 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -483,6 +483,14 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_ELP_INTERVAL,
 
+	/**
+	 * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be
+	 *  used by B.A.T.M.A.N. V when estimating the link throughput using
+	 *  this interface. If the value is set to 0 then batman-adv will try to
+	 *  estimate the throughput by itself.
+	 */
+	BATADV_ATTR_THROUGHPUT_OVERRIDE,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 09187e6e92a3..476b4c6017c9 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -160,6 +160,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_NETWORK_CODING_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_ORIG_INTERVAL]		= { .type = NLA_U32 },
 	[BATADV_ATTR_ELP_INTERVAL]		= { .type = NLA_U32 },
+	[BATADV_ATTR_THROUGHPUT_OVERRIDE]	= { .type = NLA_U32 },
 };
 
 /**
@@ -830,6 +831,10 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg,
 	if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL,
 			atomic_read(&hard_iface->bat_v.elp_interval)))
 		goto nla_put_failure;
+
+	if (nla_put_u32(msg, BATADV_ATTR_THROUGHPUT_OVERRIDE,
+			atomic_read(&hard_iface->bat_v.throughput_override)))
+		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_BATMAN_V */
 
 	genlmsg_end(msg, hdr);
@@ -925,6 +930,13 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb,
 
 		atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr));
 	}
+
+	if (info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE]) {
+		attr = info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE];
+
+		atomic_set(&hard_iface->bat_v.throughput_override,
+			   nla_get_u32(attr));
+	}
 #endif /* CONFIG_BATMAN_ADV_BATMAN_V */
 
 	batadv_netlink_notify_hardif(bat_priv, hard_iface);
-- 
2.11.0

[B.A.T.M.A.N.] [PATCH 21/21] batman-adv: Trigger genl notification on sysfs config change

[Simon Wunderlich]

From: Sven Eckelmann <sven@narfation.org>

The generic netlink code is expected to trigger notification messages when
configuration might have been changed. But the configuration of batman-adv
is most of the time still done using sysfs. So the sysfs interface should
also trigger the corresponding netlink messages via the "config" multicast
group.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 net/batman-adv/netlink.c | 10 ++++----
 net/batman-adv/netlink.h |  6 +++++
 net/batman-adv/sysfs.c   | 63 +++++++++++++++++++++++++++++++++++++++---------
 3 files changed, 63 insertions(+), 16 deletions(-)

diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 476b4c6017c9..67a58da2e6a0 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -385,7 +385,7 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
  *
  * Return: 0 on success, < 0 on error
  */
-static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
 {
 	struct sk_buff *msg;
 	int ret;
@@ -852,8 +852,8 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg,
  *
  * Return: 0 on success, < 0 on error
  */
-static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
-					struct batadv_hard_iface *hard_iface)
+int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+				 struct batadv_hard_iface *hard_iface)
 {
 	struct sk_buff *msg;
 	int ret;
@@ -1057,8 +1057,8 @@ static int batadv_netlink_vlan_fill(struct sk_buff *msg,
  *
  * Return: 0 on success, < 0 on error
  */
-static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
-				      struct batadv_softif_vlan *vlan)
+int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+			       struct batadv_softif_vlan *vlan)
 {
 	struct sk_buff *msg;
 	int ret;
diff --git a/net/batman-adv/netlink.h b/net/batman-adv/netlink.h
index 216484b8b82d..7273368544fc 100644
--- a/net/batman-adv/netlink.h
+++ b/net/batman-adv/netlink.h
@@ -34,6 +34,12 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst,
 				  u8 result, u32 test_time, u64 total_bytes,
 				  u32 cookie);
 
+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv);
+int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+				 struct batadv_hard_iface *hard_iface);
+int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+			       struct batadv_softif_vlan *vlan);
+
 extern struct genl_family batadv_netlink_family;
 
 #endif /* _NET_BATMAN_ADV_NETLINK_H_ */
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index 64fd5932a555..0b4b3fb778a6 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -48,6 +48,7 @@
 #include "gateway_common.h"
 #include "hard-interface.h"
 #include "log.h"
+#include "netlink.h"
 #include "network-coding.h"
 #include "soft-interface.h"
 
@@ -154,9 +155,14 @@ ssize_t batadv_store_##_name(struct kobject *kobj,			\
 {									\
 	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);	\
 	struct batadv_priv *bat_priv = netdev_priv(net_dev);		\
+	ssize_t length;							\
+									\
+	length = __batadv_store_bool_attr(buff, count, _post_func, attr,\
+					  &bat_priv->_name, net_dev);	\
 									\
-	return __batadv_store_bool_attr(buff, count, _post_func, attr,	\
-					&bat_priv->_name, net_dev);	\
+	batadv_netlink_notify_mesh(bat_priv);				\
+									\
+	return length;							\
 }
 
 #define BATADV_ATTR_SIF_SHOW_BOOL(_name)				\
@@ -186,11 +192,16 @@ ssize_t batadv_store_##_name(struct kobject *kobj,			\
 {									\
 	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);	\
 	struct batadv_priv *bat_priv = netdev_priv(net_dev);		\
+	ssize_t length;							\
 									\
-	return __batadv_store_uint_attr(buff, count, _min, _max,	\
-					_post_func, attr,		\
-					&bat_priv->_var, net_dev,	\
-					NULL);	\
+	length = __batadv_store_uint_attr(buff, count, _min, _max,	\
+					  _post_func, attr,		\
+					  &bat_priv->_var, net_dev,	\
+					  NULL);			\
+									\
+	batadv_netlink_notify_mesh(bat_priv);				\
+									\
+	return length;							\
 }
 
 #define BATADV_ATTR_SIF_SHOW_UINT(_name, _var)				\
@@ -223,6 +234,11 @@ ssize_t batadv_store_vlan_##_name(struct kobject *kobj,			\
 					      attr, &vlan->_name,	\
 					      bat_priv->soft_iface);	\
 									\
+	if (vlan->vid)							\
+		batadv_netlink_notify_vlan(bat_priv, vlan);		\
+	else								\
+		batadv_netlink_notify_mesh(bat_priv);			\
+									\
 	batadv_softif_vlan_put(vlan);					\
 	return res;							\
 }
@@ -256,6 +272,7 @@ ssize_t batadv_store_##_name(struct kobject *kobj,			\
 {									\
 	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);	\
 	struct batadv_hard_iface *hard_iface;				\
+	struct batadv_priv *bat_priv;					\
 	ssize_t length;							\
 									\
 	hard_iface = batadv_hardif_get_by_netdev(net_dev);		\
@@ -268,6 +285,11 @@ ssize_t batadv_store_##_name(struct kobject *kobj,			\
 					  hard_iface->soft_iface,	\
 					  net_dev);			\
 									\
+	if (hard_iface->soft_iface) {					\
+		bat_priv = netdev_priv(hard_iface->soft_iface);		\
+		batadv_netlink_notify_hardif(bat_priv, hard_iface);	\
+	}								\
+									\
 	batadv_hardif_put(hard_iface);				\
 	return length;							\
 }
@@ -537,6 +559,9 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj,
 	batadv_gw_check_client_stop(bat_priv);
 	atomic_set(&bat_priv->gw.mode, (unsigned int)gw_mode_tmp);
 	batadv_gw_tvlv_container_update(bat_priv);
+
+	batadv_netlink_notify_mesh(bat_priv);
+
 	return count;
 }
 
@@ -563,6 +588,7 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj,
 					 size_t count)
 {
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
+	ssize_t length;
 
 	/* setting the GW selection class is allowed only if the routing
 	 * algorithm in use implements the GW API
@@ -578,10 +604,14 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj,
 		return bat_priv->algo_ops->gw.store_sel_class(bat_priv, buff,
 							      count);
 
-	return __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE,
-					batadv_post_gw_reselect, attr,
-					&bat_priv->gw.sel_class,
-					bat_priv->soft_iface, NULL);
+	length = __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE,
+					  batadv_post_gw_reselect, attr,
+					  &bat_priv->gw.sel_class,
+					  bat_priv->soft_iface, NULL);
+
+	batadv_netlink_notify_mesh(bat_priv);
+
+	return length;
 }
 
 static ssize_t batadv_show_gw_bwidth(struct kobject *kobj,
@@ -601,12 +631,18 @@ static ssize_t batadv_store_gw_bwidth(struct kobject *kobj,
 				      struct attribute *attr, char *buff,
 				      size_t count)
 {
+	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
 	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
+	ssize_t length;
 
 	if (buff[count - 1] == '\n')
 		buff[count - 1] = '\0';
 
-	return batadv_gw_bandwidth_set(net_dev, buff, count);
+	length = batadv_gw_bandwidth_set(net_dev, buff, count);
+
+	batadv_netlink_notify_mesh(bat_priv);
+
+	return length;
 }
 
 /**
@@ -674,6 +710,8 @@ static ssize_t batadv_store_isolation_mark(struct kobject *kobj,
 		    "New skb mark for extended isolation: %#.8x/%#.8x\n",
 		    bat_priv->isolation_mark, bat_priv->isolation_mark_mask);
 
+	batadv_netlink_notify_mesh(bat_priv);
+
 	return count;
 }
 
@@ -1078,6 +1116,7 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,
 						struct attribute *attr,
 						char *buff, size_t count)
 {
+	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
 	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
 	struct batadv_hard_iface *hard_iface;
 	u32 tp_override;
@@ -1108,6 +1147,8 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,
 
 	atomic_set(&hard_iface->bat_v.throughput_override, tp_override);
 
+	batadv_netlink_notify_hardif(bat_priv, hard_iface);
+
 out:
 	batadv_hardif_put(hard_iface);
 	return count;
-- 
2.11.0

Re: [B.A.T.M.A.N.] [PATCH 00/21] pull request for net-next: batman-adv 2019-02-13

[David Miller]

From: Simon Wunderlich <sw@simonwunderlich.de>
Date: Wed, 13 Feb 2019 10:55:03 +0100

> here is another pull request for batman-adv to go into net-next. The main
> patchset is Svens netlink restructure series, which was also discussed on netdev
> for quite some time now and should be ready to be integrated.
> 
> Please pull or let me know of any problem!

Pulled, thanks a lot Simon.