[B.A.T.M.A.N.] Unable to ping interface in ap mode / client mode with IP4 addr

[B.A.T.M.A.N.] Unable to ping interface in ap mode / client mode with IP4 addr

[Hannes Harms]

Hi,

I want to set up bat0 on top of a wifi interface in ap mode
and another machine with bat0 on top of a wifi interface in client mode.

Via iw dev wlan0 station dump I can seen that both are connected.
Via batctl o I see the connected node.
Via batct ping mac addr  I can ping each other.

But I can not ping with an IP4 addr.

bat0 was added to a bridge interface with a static IP on both machines.
No DHCP server is running, because only static IPS are needed.

Did I miss something?

Regrads
Hannes

Re: [B.A.T.M.A.N.] Unable to ping interface in ap mode / client mode with IP4 addr

[Marek Lindner]

[-- Attachment #1: Type: text/plain, Size: 382 bytes --]

On Tuesday, May 10, 2016 21:07:27 Hannes Harms wrote:
> But I can not ping with an IP4 addr.
> 
> bat0 was added to a bridge interface with a static IP on both machines.
> No DHCP server is running, because only static IPS are needed.

Can you describe from where you are pinging (which hosts are involved) and 
post the IP configuration (e.g. ip addr && ip route) ?

Thanks,
Marek

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [B.A.T.M.A.N.] Unable to ping interface in ap mode / client mode with IP4 addr

[Harms, Hannes]

Hi,

ip route did the trick.
Now it is working.

Thanks,
Hannes


Am 10.05.2016 um 23:16 schrieb Marek Lindner:
> On Tuesday, May 10, 2016 21:07:27 Hannes Harms wrote:
>> But I can not ping with an IP4 addr.
>>
>> bat0 was added to a bridge interface with a static IP on both machines.
>> No DHCP server is running, because only static IPS are needed.
> Can you describe from where you are pinging (which hosts are involved) and
> post the IP configuration (e.g. ip addr && ip route) ?
>
> Thanks,
> Marek

--