* [B.A.T.M.A.N.] [RFC 0/5] batman-adv: Throughput meter
@ 2016-02-18 17:25 Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 1/5] batman-adv: return netdev status in the TX path Sven Eckelmann
2016-02-26 10:41 ` [B.A.T.M.A.N.] [RFC 0/5] batman-adv: Throughput meter Edo Monticelli
0 siblings, 2 replies; 7+ messages in thread
From: Sven Eckelmann @ 2016-02-18 17:25 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Edo Monticelli
Hi,
do you still remember GSOC 2012? Yes, it is really long ago. It was a time
when winters were still cold, summers still hot and it was still politically
correct to say "bandwidth meter" when you actually meant "throughput meter".
Three students tried their best to implement some of the ideas floating around
in the B.A.T.M.A.N. advanced community. And after some more work, most of the
features reached the finishing line. TVLV [1] and the fragmentation v2 [2]
were both integrated as part of the COMPAT 15 bump. But the "bandwidth
meter" [3] was never ready to being merged.
Nevertheless, the lessons learned in the first implementation [4] inspired
different people to continue working on it. Especially Antonio Quartulli
worked on his own version to increase its usefulness. And this feature makes
even more sense since we reached the new "throughput based metric" time epoch
with the introduction of B.A.T.M.A.N. V.
I hope we can reignite interest in this feature with a rebased and refurbished
version of this patchset. Both the batman-adv and batctl patches are based on
the newest revision in their respective master branches. Also a branch called
"tp_meter" was created in the batctl.git and batman-adv.git repository with
these patches already applied.
batman-adv
==========
Antonio Quartulli (2):
batman-adv: return netdev status in the TX path
batman-adv: use another ICMP packet when sending command from userspace
batman-adv: throughput meter implementation
Sven Eckelmann (1):
batman-adv: Add compatibility code for to_delayed_work
compat-include/linux/netdevice.h | 17 +
compat-include/linux/workqueue.h | 46 ++
net/batman-adv/Makefile | 1 +
net/batman-adv/fragmentation.c | 41 +-
net/batman-adv/fragmentation.h | 6 +-
net/batman-adv/icmp_socket.c | 225 +++---
net/batman-adv/icmp_socket.h | 5 +-
net/batman-adv/main.c | 6 +-
net/batman-adv/main.h | 24 +-
net/batman-adv/packet.h | 120 ++++
net/batman-adv/routing.c | 33 +-
net/batman-adv/send.c | 25 +-
net/batman-adv/soft-interface.c | 2 +
net/batman-adv/tp_meter.c | 1451 ++++++++++++++++++++++++++++++++++++++
net/batman-adv/tp_meter.h | 34 +
net/batman-adv/types.h | 113 +++
16 files changed, 2005 insertions(+), 144 deletions(-)
batctl
======
Antonio Quartulli (1):
batctl: introduce throughput meter support
Makefile | 2 +-
main.c | 6 ++
man/batctl.8 | 24 ++++++-
packet.h | 120 +++++++++++++++++++++++++++++++
tcpdump.c | 14 +++-
tp_meter.c | 227 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
tp_meter.h | 22 ++++++
7 files changed, 411 insertions(+), 4 deletions(-)
Kind regards,
Sven
[1] https://www.open-mesh.org/projects/open-mesh/wiki/2012-10-01-GSoC-2012-Spyros-Gasteros-Final-Report
[2] https://www.open-mesh.org/projects/open-mesh/wiki/2012-09-24-GSoC-2012-Martin-Hundebolls-Final-Report
[3] https://www.open-mesh.org/projects/open-mesh/wiki/2012-10-06-GSoC-2012-Edo-Monticellis-Final-Report
[4] https://lists.open-mesh.org/pipermail/b.a.t.m.a.n/2012-August/007924.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* [B.A.T.M.A.N.] [RFC 1/5] batman-adv: return netdev status in the TX path
2016-02-18 17:25 [B.A.T.M.A.N.] [RFC 0/5] batman-adv: Throughput meter Sven Eckelmann
@ 2016-02-18 17:26 ` Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 2/5] batman-adv: use another ICMP packet when sending command from userspace Sven Eckelmann
` (3 more replies)
2016-02-26 10:41 ` [B.A.T.M.A.N.] [RFC 0/5] batman-adv: Throughput meter Edo Monticelli
1 sibling, 4 replies; 7+ messages in thread
From: Sven Eckelmann @ 2016-02-18 17:26 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Edo Monticelli, Antonio Quartulli, Sven Eckelmann
From: Antonio Quartulli <antonio.quartulli@open-mesh.com>
Return the proper netdev TX status along the TX path so that the tp_meter
can understand when the queue is full and should stop sending packets.
Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
---
compat-include/linux/netdevice.h | 17 +++++++++++++++++
net/batman-adv/fragmentation.c | 41 ++++++++++++++++++++++++----------------
net/batman-adv/fragmentation.h | 6 +++---
net/batman-adv/main.c | 4 +++-
net/batman-adv/routing.c | 24 +++++++++++++----------
net/batman-adv/send.c | 25 ++++++++++++------------
6 files changed, 75 insertions(+), 42 deletions(-)
diff --git a/compat-include/linux/netdevice.h b/compat-include/linux/netdevice.h
index 9ff91b5..3637438 100644
--- a/compat-include/linux/netdevice.h
+++ b/compat-include/linux/netdevice.h
@@ -32,6 +32,23 @@
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 33)
+static inline bool dev_xmit_complete(int rc)
+{
+ /* successful transmission */
+ if (rc == NETDEV_TX_OK)
+ return true;
+
+ /* error while transmitting, driver consumed skb */
+ if (rc < 0)
+ return true;
+
+ /* error while queueing to a different device, driver consumed skb */
+ if (rc & NET_XMIT_MASK)
+ return true;
+
+ return false;
+}
+
#define unregister_netdevice_queue(dev, head) unregister_netdevice(dev)
#endif /* < KERNEL_VERSION(2, 6, 33) */
diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c
index e6956d0..384b6bf 100644
--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -434,11 +434,12 @@ err:
* @orig_node: final destination of the created fragments
* @neigh_node: next-hop of the created fragments
*
- * Return: true on success, false otherwise.
+ * Return: the netdev tx status or -1 in case of error.
+ * When -1 is returned the skb is not consumed.
*/
-bool batadv_frag_send_packet(struct sk_buff *skb,
- struct batadv_orig_node *orig_node,
- struct batadv_neigh_node *neigh_node)
+int batadv_frag_send_packet(struct sk_buff *skb,
+ struct batadv_orig_node *orig_node,
+ struct batadv_neigh_node *neigh_node)
{
struct batadv_priv *bat_priv;
struct batadv_hard_iface *primary_if = NULL;
@@ -447,7 +448,7 @@ bool batadv_frag_send_packet(struct sk_buff *skb,
unsigned mtu = neigh_node->if_incoming->net_dev->mtu;
unsigned header_size = sizeof(frag_header);
unsigned max_fragment_size, max_packet_size;
- bool ret = false;
+ int ret = -1;
/* To avoid merge and refragmentation at next-hops we never send
* fragments larger than BATADV_FRAG_MAX_FRAG_SIZE
@@ -458,12 +459,12 @@ bool batadv_frag_send_packet(struct sk_buff *skb,
/* Don't even try to fragment, if we need more than 16 fragments */
if (skb->len > max_packet_size)
- goto out_err;
+ goto out;
bat_priv = orig_node->bat_priv;
primary_if = batadv_primary_if_get_selected(bat_priv);
if (!primary_if)
- goto out_err;
+ goto out;
/* Create one header to be copied to all fragments */
frag_header.packet_type = BATADV_UNICAST_FRAG;
@@ -480,23 +481,33 @@ bool batadv_frag_send_packet(struct sk_buff *skb,
while (skb->len > max_fragment_size) {
skb_fragment = batadv_frag_create(skb, &frag_header, mtu);
if (!skb_fragment)
- goto out_err;
+ goto out;
batadv_inc_counter(bat_priv, BATADV_CNT_FRAG_TX);
batadv_add_counter(bat_priv, BATADV_CNT_FRAG_TX_BYTES,
skb_fragment->len + ETH_HLEN);
- batadv_send_unicast_skb(skb_fragment, neigh_node);
+ ret = batadv_send_unicast_skb(skb_fragment, neigh_node);
+ if (ret != NET_XMIT_SUCCESS) {
+ /* return -1 so that the caller can free the original
+ * skb
+ */
+ ret = -1;
+ goto out;
+ }
+
frag_header.no++;
/* The initial check in this function should cover this case */
- if (frag_header.no == BATADV_FRAG_MAX_FRAGMENTS - 1)
- goto out_err;
+ if (frag_header.no == BATADV_FRAG_MAX_FRAGMENTS - 1) {
+ ret = -1;
+ goto out;
+ }
}
/* Make room for the fragment header. */
if (batadv_skb_head_push(skb, header_size) < 0 ||
pskb_expand_head(skb, header_size + ETH_HLEN, 0, GFP_ATOMIC) < 0)
- goto out_err;
+ goto out;
memcpy(skb->data, &frag_header, header_size);
@@ -504,11 +515,9 @@ bool batadv_frag_send_packet(struct sk_buff *skb,
batadv_inc_counter(bat_priv, BATADV_CNT_FRAG_TX);
batadv_add_counter(bat_priv, BATADV_CNT_FRAG_TX_BYTES,
skb->len + ETH_HLEN);
- batadv_send_unicast_skb(skb, neigh_node);
+ ret = batadv_send_unicast_skb(skb, neigh_node);
- ret = true;
-
-out_err:
+out:
if (primary_if)
batadv_hardif_put(primary_if);
diff --git a/net/batman-adv/fragmentation.h b/net/batman-adv/fragmentation.h
index 9ff77c7..3202fe3 100644
--- a/net/batman-adv/fragmentation.h
+++ b/net/batman-adv/fragmentation.h
@@ -34,9 +34,9 @@ bool batadv_frag_skb_fwd(struct sk_buff *skb,
struct batadv_orig_node *orig_node_src);
bool batadv_frag_skb_buffer(struct sk_buff **skb,
struct batadv_orig_node *orig_node);
-bool batadv_frag_send_packet(struct sk_buff *skb,
- struct batadv_orig_node *orig_node,
- struct batadv_neigh_node *neigh_node);
+int batadv_frag_send_packet(struct sk_buff *skb,
+ struct batadv_orig_node *orig_node,
+ struct batadv_neigh_node *neigh_node);
/**
* batadv_frag_check_entry - check if a list of fragments has timed out
diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index d64ddb9..fe4d711 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -1183,6 +1183,7 @@ void batadv_tvlv_unicast_send(struct batadv_priv *bat_priv, u8 *src,
unsigned char *tvlv_buff;
unsigned int tvlv_len;
ssize_t hdr_len = sizeof(*unicast_tvlv_packet);
+ int res;
orig_node = batadv_orig_hash_find(bat_priv, dst);
if (!orig_node)
@@ -1215,7 +1216,8 @@ void batadv_tvlv_unicast_send(struct batadv_priv *bat_priv, u8 *src,
tvlv_buff += sizeof(*tvlv_hdr);
memcpy(tvlv_buff, tvlv_value, tvlv_value_len);
- if (batadv_send_skb_to_orig(skb, orig_node, NULL) == NET_XMIT_DROP)
+ res = batadv_send_skb_to_orig(skb, orig_node, NULL);
+ if (!(res != -1 && dev_xmit_complete(res)))
kfree_skb(skb);
out:
batadv_orig_node_put(orig_node);
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index 4dd646a..e38c97f 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -259,7 +259,10 @@ static int batadv_recv_my_icmp_packet(struct batadv_priv *bat_priv,
icmph->ttl = BATADV_TTL;
res = batadv_send_skb_to_orig(skb, orig_node, NULL);
- if (res != NET_XMIT_DROP)
+ if (res == -1)
+ goto out;
+
+ if (dev_xmit_complete(res))
ret = NET_RX_SUCCESS;
break;
@@ -281,7 +284,7 @@ static int batadv_recv_icmp_ttl_exceeded(struct batadv_priv *bat_priv,
struct batadv_hard_iface *primary_if = NULL;
struct batadv_orig_node *orig_node = NULL;
struct batadv_icmp_packet *icmp_packet;
- int ret = NET_RX_DROP;
+ int res, ret = NET_RX_DROP;
icmp_packet = (struct batadv_icmp_packet *)skb->data;
@@ -312,7 +315,8 @@ static int batadv_recv_icmp_ttl_exceeded(struct batadv_priv *bat_priv,
icmp_packet->msg_type = BATADV_TTL_EXCEEDED;
icmp_packet->ttl = BATADV_TTL;
- if (batadv_send_skb_to_orig(skb, orig_node, NULL) != NET_XMIT_DROP)
+ res = batadv_send_skb_to_orig(skb, orig_node, NULL);
+ if (res != -1 && dev_xmit_complete(res))
ret = NET_RX_SUCCESS;
out:
@@ -332,7 +336,7 @@ int batadv_recv_icmp_packet(struct sk_buff *skb,
struct ethhdr *ethhdr;
struct batadv_orig_node *orig_node = NULL;
int hdr_size = sizeof(struct batadv_icmp_header);
- int ret = NET_RX_DROP;
+ int res, ret = NET_RX_DROP;
/* drop packet if it has not necessary minimum size */
if (unlikely(!pskb_may_pull(skb, hdr_size)))
@@ -398,7 +402,8 @@ int batadv_recv_icmp_packet(struct sk_buff *skb,
icmph->ttl--;
/* route it */
- if (batadv_send_skb_to_orig(skb, orig_node, recv_if) != NET_XMIT_DROP)
+ res = batadv_send_skb_to_orig(skb, orig_node, recv_if);
+ if (res != -1 && dev_xmit_complete(res))
ret = NET_RX_SUCCESS;
out:
@@ -633,6 +638,8 @@ static int batadv_route_unicast_packet(struct sk_buff *skb,
batadv_skb_set_priority(skb, hdr_len);
res = batadv_send_skb_to_orig(skb, orig_node, recv_if);
+ if (res == -1)
+ goto out;
/* translate transmit result into receive result */
if (res == NET_XMIT_SUCCESS) {
@@ -640,12 +647,9 @@ static int batadv_route_unicast_packet(struct sk_buff *skb,
batadv_inc_counter(bat_priv, BATADV_CNT_FORWARD);
batadv_add_counter(bat_priv, BATADV_CNT_FORWARD_BYTES,
skb->len + ETH_HLEN);
-
- ret = NET_RX_SUCCESS;
- } else if (res == NET_XMIT_POLICED) {
- /* skb was buffered and consumed */
- ret = NET_RX_SUCCESS;
}
+ if (dev_xmit_complete(res))
+ ret = NET_RX_SUCCESS;
out:
if (orig_node)
diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c
index 3ce06e0..efb9fe7 100644
--- a/net/batman-adv/send.c
+++ b/net/batman-adv/send.c
@@ -154,8 +154,11 @@ int batadv_send_unicast_skb(struct sk_buff *skb,
* host, NULL can be passed as recv_if and no interface alternating is
* attempted.
*
- * Return: NET_XMIT_SUCCESS on success, NET_XMIT_DROP on failure, or
- * NET_XMIT_POLICED if the skb is buffered for later transmit.
+ * Return: -1 on failure (and the skb is not consumed), NET_XMIT_POLICED if the
+ * skb is buffered for later transmit or the NET_XMIT status returned by the
+ * lower routine if the packet has been passed down.
+ *
+ * If the returning value is not -1 the skb has been consumed.
*/
int batadv_send_skb_to_orig(struct sk_buff *skb,
struct batadv_orig_node *orig_node,
@@ -163,7 +166,7 @@ int batadv_send_skb_to_orig(struct sk_buff *skb,
{
struct batadv_priv *bat_priv = orig_node->bat_priv;
struct batadv_neigh_node *neigh_node;
- int ret = NET_XMIT_DROP;
+ int ret = -1;
/* batadv_find_router() increases neigh_nodes refcount if found. */
neigh_node = batadv_find_router(bat_priv, orig_node, recv_if);
@@ -176,8 +179,7 @@ int batadv_send_skb_to_orig(struct sk_buff *skb,
if (atomic_read(&bat_priv->fragmentation) &&
skb->len > neigh_node->if_incoming->net_dev->mtu) {
/* Fragment and send packet. */
- if (batadv_frag_send_packet(skb, orig_node, neigh_node))
- ret = NET_XMIT_SUCCESS;
+ ret = batadv_frag_send_packet(skb, orig_node, neigh_node);
goto out;
}
@@ -186,12 +188,10 @@ int batadv_send_skb_to_orig(struct sk_buff *skb,
* (i.e. being forwarded). If the packet originates from this node or if
* network coding fails, then send the packet as usual.
*/
- if (recv_if && batadv_nc_skb_forward(skb, neigh_node)) {
+ if (recv_if && batadv_nc_skb_forward(skb, neigh_node))
ret = NET_XMIT_POLICED;
- } else {
- batadv_send_unicast_skb(skb, neigh_node);
- ret = NET_XMIT_SUCCESS;
- }
+ else
+ ret = batadv_send_unicast_skb(skb, neigh_node);
out:
if (neigh_node)
@@ -317,7 +317,7 @@ int batadv_send_skb_unicast(struct batadv_priv *bat_priv,
{
struct batadv_unicast_packet *unicast_packet;
struct ethhdr *ethhdr;
- int ret = NET_XMIT_DROP;
+ int res, ret = NET_XMIT_DROP;
if (!orig_node)
goto out;
@@ -354,7 +354,8 @@ int batadv_send_skb_unicast(struct batadv_priv *bat_priv,
if (batadv_tt_global_client_is_roaming(bat_priv, ethhdr->h_dest, vid))
unicast_packet->ttvn = unicast_packet->ttvn - 1;
- if (batadv_send_skb_to_orig(skb, orig_node, NULL) != NET_XMIT_DROP)
+ res = batadv_send_skb_to_orig(skb, orig_node, NULL);
+ if (res != -1 && dev_xmit_complete(res))
ret = NET_XMIT_SUCCESS;
out:
--
2.7.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [B.A.T.M.A.N.] [RFC 2/5] batman-adv: use another ICMP packet when sending command from userspace
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 1/5] batman-adv: return netdev status in the TX path Sven Eckelmann
@ 2016-02-18 17:26 ` Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 3/5] batman-adv: Add compatibility code for to_delayed_work Sven Eckelmann
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Sven Eckelmann @ 2016-02-18 17:26 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Edo Monticelli, Antonio Quartulli, Sven Eckelmann
From: Antonio Quartulli <antonio.quartulli@open-mesh.com>
In the current code a real batadv ICMP packet is used to communicate from
userspace to the module which ICMP operation should be start (the operation
to start depends on the size of the received packet). This worked good so
far because the same packet was used to perform the only two available ICMP
operations and the very same packet received from userspace was also sent
over the wire to perform the operation itself.
As soon as we add new and different ICMP operations this model will not
work well anymore. To improve this feature make the userspace use a proper
packet type to tell the kernel module which operation to start.
The module will then arrange the rest by itself.
Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
---
net/batman-adv/icmp_socket.c | 212 +++++++++++++++++++++++++------------------
net/batman-adv/icmp_socket.h | 5 +-
net/batman-adv/packet.h | 15 +++
net/batman-adv/types.h | 2 +
4 files changed, 140 insertions(+), 94 deletions(-)
diff --git a/net/batman-adv/icmp_socket.c b/net/batman-adv/icmp_socket.c
index 14d0013..98b4f72 100644
--- a/net/batman-adv/icmp_socket.c
+++ b/net/batman-adv/icmp_socket.c
@@ -52,8 +52,7 @@
static struct batadv_socket_client *batadv_socket_client_hash[256];
static void batadv_socket_add_packet(struct batadv_socket_client *socket_client,
- struct batadv_icmp_header *icmph,
- size_t icmp_len);
+ void *icmp_buffer, size_t icmp_len);
void batadv_socket_init(void)
{
@@ -161,7 +160,7 @@ static ssize_t batadv_socket_read(struct file *file, char __user *buf,
spin_unlock_bh(&socket_client->lock);
packet_len = min(count, socket_packet->icmp_len);
- error = copy_to_user(buf, &socket_packet->icmp_packet, packet_len);
+ error = copy_to_user(buf, &socket_packet->packet, packet_len);
kfree(socket_packet);
@@ -171,73 +170,90 @@ static ssize_t batadv_socket_read(struct file *file, char __user *buf,
return packet_len;
}
-static ssize_t batadv_socket_write(struct file *file, const char __user *buff,
- size_t len, loff_t *off)
+/**
+ * batadv_socket_write_user - Parse batadv_icmp_user_packet
+ * @bat_priv: the bat priv with all the icmp socket information
+ * @socket_client: layer2 icmp socket client data
+ * @primary_if: the selected primary interface
+ * @buff: buffer of user data
+ * @len: length of the data in buff
+ *
+ * Return: Number of read bytes from buff or < 0 on errors
+ */
+static ssize_t
+batadv_socket_write_user(struct batadv_priv *bat_priv,
+ struct batadv_socket_client *socket_client,
+ struct batadv_hard_iface *primary_if,
+ const char __user *buff, size_t len)
+{
+ struct batadv_icmp_user_packet icmp_user_packet;
+
+ if (copy_from_user(&icmp_user_packet, buff, len))
+ return -EFAULT;
+
+ /* no command supported yet! */
+ len = -EINVAL;
+
+ return len;
+}
+
+/**
+ * batadv_socket_write_raw - Parse batadv_icmp_packet/batadv_icmp_packet_rr
+ * @bat_priv: the bat priv with all the icmp socket information
+ * @socket_client: layer2 icmp socket client data
+ * @primary_if: the selected primary interface
+ * @buff: buffer of user data
+ * @len: length of the data in buff
+ *
+ * Return: Number of read bytes from buff or < 0 on errors
+ */
+static ssize_t
+batadv_socket_write_raw(struct batadv_priv *bat_priv,
+ struct batadv_socket_client *socket_client,
+ struct batadv_hard_iface *primary_if,
+ const char __user *buff, size_t len)
{
- struct batadv_socket_client *socket_client = file->private_data;
- struct batadv_priv *bat_priv = socket_client->bat_priv;
- struct batadv_hard_iface *primary_if = NULL;
struct sk_buff *skb;
- struct batadv_icmp_packet_rr *icmp_packet_rr;
- struct batadv_icmp_header *icmp_header;
+ struct batadv_icmp_packet_rr icmp_packet, *icmp_buff;
struct batadv_orig_node *orig_node = NULL;
struct batadv_neigh_node *neigh_node = NULL;
- size_t packet_len = sizeof(struct batadv_icmp_packet);
+ size_t packet_len;
u8 *addr;
- if (len < sizeof(struct batadv_icmp_header)) {
+ if (len != sizeof(struct batadv_icmp_packet_rr) &&
+ len != sizeof(struct batadv_icmp_packet)) {
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Error - can't send packet from char device: invalid packet size\n");
return -EINVAL;
}
- primary_if = batadv_primary_if_get_selected(bat_priv);
-
- if (!primary_if) {
- len = -EFAULT;
- goto out;
- }
-
- if (len >= BATADV_ICMP_MAX_PACKET_SIZE)
- packet_len = BATADV_ICMP_MAX_PACKET_SIZE;
- else
- packet_len = len;
-
- skb = netdev_alloc_skb_ip_align(NULL, packet_len + ETH_HLEN);
- if (!skb) {
- len = -ENOMEM;
- goto out;
- }
+ packet_len = len;
+ if (copy_from_user(&icmp_packet, buff, len))
+ return -EFAULT;
- skb->priority = TC_PRIO_CONTROL;
- skb_reserve(skb, ETH_HLEN);
- icmp_header = (struct batadv_icmp_header *)skb_put(skb, packet_len);
+ icmp_packet.uid = socket_client->index;
- if (copy_from_user(icmp_header, buff, packet_len)) {
- len = -EFAULT;
- goto free_skb;
+ /* if the compat version does not match, return an error now */
+ if (icmp_packet.version != BATADV_COMPAT_VERSION) {
+ icmp_packet.msg_type = BATADV_PARAMETER_PROBLEM;
+ icmp_packet.version = BATADV_COMPAT_VERSION;
+ batadv_socket_add_packet(socket_client, &icmp_packet,
+ packet_len);
+ return len;
}
- if (icmp_header->packet_type != BATADV_ICMP) {
+ if (icmp_packet.packet_type != BATADV_ICMP) {
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Error - can't send packet from char device: got bogus packet type (expected: BAT_ICMP)\n");
- len = -EINVAL;
- goto free_skb;
+ return -EINVAL;
}
- switch (icmp_header->msg_type) {
+ switch (icmp_packet.msg_type) {
case BATADV_ECHO_REQUEST:
- if (len < sizeof(struct batadv_icmp_packet)) {
- batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
- "Error - can't send packet from char device: invalid packet size\n");
- len = -EINVAL;
- goto free_skb;
- }
-
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE)
goto dst_unreach;
- orig_node = batadv_orig_hash_find(bat_priv, icmp_header->dst);
+ orig_node = batadv_orig_hash_find(bat_priv, icmp_packet.dst);
if (!orig_node)
goto dst_unreach;
@@ -252,47 +268,68 @@ static ssize_t batadv_socket_write(struct file *file, const char __user *buff,
if (neigh_node->if_incoming->if_status != BATADV_IF_ACTIVE)
goto dst_unreach;
- icmp_packet_rr = (struct batadv_icmp_packet_rr *)icmp_header;
- if (packet_len == sizeof(*icmp_packet_rr)) {
- addr = neigh_node->if_incoming->net_dev->dev_addr;
- ether_addr_copy(icmp_packet_rr->rr[0], addr);
- }
-
break;
default:
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Error - can't send packet from char device: got unknown message type\n");
- len = -EINVAL;
- goto free_skb;
+ return -EINVAL;
}
- icmp_header->uid = socket_client->index;
+ skb = netdev_alloc_skb_ip_align(NULL, packet_len + ETH_HLEN);
+ if (!skb)
+ return -ENOMEM;
- if (icmp_header->version != BATADV_COMPAT_VERSION) {
- icmp_header->msg_type = BATADV_PARAMETER_PROBLEM;
- icmp_header->version = BATADV_COMPAT_VERSION;
- batadv_socket_add_packet(socket_client, icmp_header,
- packet_len);
- goto free_skb;
- }
+ skb->priority = TC_PRIO_CONTROL;
+ skb_reserve(skb, ETH_HLEN);
+ icmp_buff = (struct batadv_icmp_packet_rr *)skb_put(skb, packet_len);
+ memcpy(icmp_buff, &icmp_packet, packet_len);
- ether_addr_copy(icmp_header->orig, primary_if->net_dev->dev_addr);
+ ether_addr_copy(icmp_buff->orig, primary_if->net_dev->dev_addr);
+
+ switch (icmp_packet.msg_type) {
+ case BATADV_ECHO_REQUEST:
+ if (len == sizeof(struct batadv_icmp_packet_rr)) {
+ addr = neigh_node->if_incoming->net_dev->dev_addr;
+ ether_addr_copy(icmp_packet.rr[0], addr);
+ }
+ break;
+ }
batadv_send_unicast_skb(skb, neigh_node);
goto out;
dst_unreach:
- icmp_header->msg_type = BATADV_DESTINATION_UNREACHABLE;
- batadv_socket_add_packet(socket_client, icmp_header, packet_len);
-free_skb:
- kfree_skb(skb);
+ icmp_packet.msg_type = BATADV_DESTINATION_UNREACHABLE;
+ batadv_socket_add_packet(socket_client, &icmp_packet, packet_len);
out:
- if (primary_if)
- batadv_hardif_put(primary_if);
if (neigh_node)
batadv_neigh_node_put(neigh_node);
if (orig_node)
batadv_orig_node_put(orig_node);
+
+ return len;
+}
+
+static ssize_t batadv_socket_write(struct file *file, const char __user *buff,
+ size_t len, loff_t *off)
+{
+ struct batadv_socket_client *socket_client = file->private_data;
+ struct batadv_priv *bat_priv = socket_client->bat_priv;
+ struct batadv_hard_iface *primary_if;
+
+ primary_if = batadv_primary_if_get_selected(bat_priv);
+ if (!primary_if)
+ return -EFAULT;
+
+ if (len == sizeof(struct batadv_icmp_user_packet))
+ len = batadv_socket_write_user(bat_priv, socket_client,
+ primary_if, buff, len);
+ else
+ len = batadv_socket_write_raw(bat_priv, socket_client,
+ primary_if, buff, len);
+
+ batadv_hardif_put(primary_if);
+
return len;
}
@@ -340,36 +377,29 @@ err:
* batadv_socket_receive_packet - schedule an icmp packet to be sent to
* userspace on an icmp socket.
* @socket_client: the socket this packet belongs to
- * @icmph: pointer to the header of the icmp packet
+ * @icmp_buffer: pointer to the icmp packet
* @icmp_len: total length of the icmp packet
*/
static void batadv_socket_add_packet(struct batadv_socket_client *socket_client,
- struct batadv_icmp_header *icmph,
- size_t icmp_len)
+ void *icmp_buffer, size_t icmp_len)
{
struct batadv_socket_packet *socket_packet;
- size_t len;
-
- socket_packet = kmalloc(sizeof(*socket_packet), GFP_ATOMIC);
+ struct batadv_icmp_packet *icmp_packet;
+ icmp_packet = (struct batadv_icmp_packet *)icmp_buffer;
+ socket_packet = kmalloc(sizeof(*socket_packet) + icmp_len, GFP_ATOMIC);
if (!socket_packet)
return;
- len = icmp_len;
- /* check the maximum length before filling the buffer */
- if (len > sizeof(socket_packet->icmp_packet))
- len = sizeof(socket_packet->icmp_packet);
-
- INIT_LIST_HEAD(&socket_packet->list);
- memcpy(&socket_packet->icmp_packet, icmph, len);
- socket_packet->icmp_len = len;
+ memcpy(socket_packet->packet, icmp_packet, icmp_len);
+ socket_packet->icmp_len = icmp_len;
spin_lock_bh(&socket_client->lock);
/* while waiting for the lock the socket_client could have been
* deleted
*/
- if (!batadv_socket_client_hash[icmph->uid]) {
+ if (!batadv_socket_client_hash[icmp_packet->uid]) {
spin_unlock_bh(&socket_client->lock);
kfree(socket_packet);
return;
@@ -396,15 +426,17 @@ static void batadv_socket_add_packet(struct batadv_socket_client *socket_client,
/**
* batadv_socket_receive_packet - schedule an icmp packet to be received
* locally and sent to userspace.
- * @icmph: pointer to the header of the icmp packet
+ * @icmp_buffer: pointer to the the icmp packet
* @icmp_len: total length of the icmp packet
*/
-void batadv_socket_receive_packet(struct batadv_icmp_header *icmph,
- size_t icmp_len)
+void batadv_socket_receive_packet(void *icmp_buffer, size_t icmp_len)
{
struct batadv_socket_client *hash;
+ struct batadv_icmp_packet *icmp;
+
+ icmp = (struct batadv_icmp_packet *)icmp_buffer;
- hash = batadv_socket_client_hash[icmph->uid];
+ hash = batadv_socket_client_hash[icmp->uid];
if (hash)
- batadv_socket_add_packet(hash, icmph, icmp_len);
+ batadv_socket_add_packet(hash, icmp_buffer, icmp_len);
}
diff --git a/net/batman-adv/icmp_socket.h b/net/batman-adv/icmp_socket.h
index 618d5de..0043b44 100644
--- a/net/batman-adv/icmp_socket.h
+++ b/net/batman-adv/icmp_socket.h
@@ -22,13 +22,10 @@
#include <linux/types.h>
-struct batadv_icmp_header;
-
#define BATADV_ICMP_SOCKET "socket"
void batadv_socket_init(void);
int batadv_socket_setup(struct batadv_priv *bat_priv);
-void batadv_socket_receive_packet(struct batadv_icmp_header *icmph,
- size_t icmp_len);
+void batadv_socket_receive_packet(void *icmp_buffer, size_t icmp_len);
#endif /* _NET_BATMAN_ADV_ICMP_SOCKET_H_ */
diff --git a/net/batman-adv/packet.h b/net/batman-adv/packet.h
index 8a8d7ca..15da9e1 100644
--- a/net/batman-adv/packet.h
+++ b/net/batman-adv/packet.h
@@ -284,6 +284,21 @@ struct batadv_elp_packet {
#define BATADV_ELP_HLEN sizeof(struct batadv_elp_packet)
/**
+ * struct batadv_icmp_user_packet - used to start an ICMP operation from
+ * userspace
+ * @dst: destination node
+ * @version: compat version used by userspace
+ * @cmd_type: the command to start
+ * @arg1: possible argument for the command
+ */
+struct batadv_icmp_user_packet {
+ u8 dst[ETH_ALEN];
+ u8 version;
+ u8 cmd_type;
+ u32 arg1;
+};
+
+/**
* struct batadv_icmp_header - common members among all the ICMP packets
* @packet_type: batman-adv packet type, part of the general header
* @version: batman-adv protocol version, part of the genereal header
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 9abfb3e..271ded7 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -987,11 +987,13 @@ struct batadv_socket_client {
* @list: list node for batadv_socket_client::queue_list
* @icmp_len: size of the layer2 icmp packet
* @icmp_packet: layer2 icmp packet
+ * @packet: payload of layer2 icmp packet
*/
struct batadv_socket_packet {
struct list_head list;
size_t icmp_len;
u8 icmp_packet[BATADV_ICMP_MAX_PACKET_SIZE];
+ u8 packet[0];
};
#ifdef CONFIG_BATMAN_ADV_BLA
--
2.7.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [B.A.T.M.A.N.] [RFC 3/5] batman-adv: Add compatibility code for to_delayed_work
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 1/5] batman-adv: return netdev status in the TX path Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 2/5] batman-adv: use another ICMP packet when sending command from userspace Sven Eckelmann
@ 2016-02-18 17:26 ` Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 4/5] batman-adv: throughput meter implementation Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 5/5] batctl: introduce throughput meter support Sven Eckelmann
3 siblings, 0 replies; 7+ messages in thread
From: Sven Eckelmann @ 2016-02-18 17:26 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Edo Monticelli, Sven Eckelmann
From: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
---
compat-include/linux/workqueue.h | 46 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 compat-include/linux/workqueue.h
diff --git a/compat-include/linux/workqueue.h b/compat-include/linux/workqueue.h
new file mode 100644
index 0000000..85a41df
--- /dev/null
+++ b/compat-include/linux/workqueue.h
@@ -0,0 +1,46 @@
+/* Copyright (C) 2007-2016 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This file contains macros for maintaining compatibility with older versions
+ * of the Linux kernel.
+ */
+
+#ifndef _NET_BATMAN_ADV_COMPAT_LINUX_WORKQUEUE_H_
+#define _NET_BATMAN_ADV_COMPAT_LINUX_WORKQUEUE_H_
+
+#include <linux/version.h>
+#include_next <linux/workqueue.h>
+
+#include <linux/kernel.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+
+/* some stable versions like Linux 3.2.44 also introduced this function
+ * and would therefore break the build because they trigger a redefinition
+ * of this function. Instead rename this function to be in the batadv_*
+ * namespace
+ */
+#define to_delayed_work(__work) batadv_to_delayed_work(__work)
+
+static inline struct delayed_work *
+batadv_to_delayed_work(struct work_struct *work)
+{
+ return container_of(work, struct delayed_work, work);
+}
+
+#endif /* < KERNEL_VERSION(2, 6, 30) */
+
+#endif /* _NET_BATMAN_ADV_COMPAT_LINUX_WORKQUEUE_H_ */
--
2.7.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [B.A.T.M.A.N.] [RFC 4/5] batman-adv: throughput meter implementation
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 1/5] batman-adv: return netdev status in the TX path Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 2/5] batman-adv: use another ICMP packet when sending command from userspace Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 3/5] batman-adv: Add compatibility code for to_delayed_work Sven Eckelmann
@ 2016-02-18 17:26 ` Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 5/5] batctl: introduce throughput meter support Sven Eckelmann
3 siblings, 0 replies; 7+ messages in thread
From: Sven Eckelmann @ 2016-02-18 17:26 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Edo Monticelli, Antonio Quartulli, Sven Eckelmann
From: Antonio Quartulli <antonio.quartulli@open-mesh.com>
The throughput meter module is a simple, kernel-space replacement for
throughtput measurements tool like iperf and netperf. It is intended to
approximate TCP behaviour.
It is invoked through batctl: the protocol is connection oriented, with
cumulative acknowledgment and a dynamic-size sliding window.
The test *can* be interrupted by batctl. A receiver side timeout avoids
unlimited waitings for sender packets: after one second of inactivity, the
receiver abort the ongoing test.
Based on a prototype from Edo Monticelli <montik@autistici.org>
Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
---
net/batman-adv/Makefile | 1 +
net/batman-adv/icmp_socket.c | 17 +-
net/batman-adv/main.c | 2 +
net/batman-adv/main.h | 24 +-
net/batman-adv/packet.h | 105 +++
net/batman-adv/routing.c | 9 +-
net/batman-adv/soft-interface.c | 2 +
net/batman-adv/tp_meter.c | 1451 +++++++++++++++++++++++++++++++++++++++
net/batman-adv/tp_meter.h | 34 +
net/batman-adv/types.h | 111 +++
10 files changed, 1746 insertions(+), 10 deletions(-)
create mode 100644 net/batman-adv/tp_meter.c
create mode 100644 net/batman-adv/tp_meter.h
diff --git a/net/batman-adv/Makefile b/net/batman-adv/Makefile
index 797cf2f..a91c2f5 100644
--- a/net/batman-adv/Makefile
+++ b/net/batman-adv/Makefile
@@ -39,4 +39,5 @@ batman-adv-y += routing.o
batman-adv-y += send.o
batman-adv-y += soft-interface.o
batman-adv-y += sysfs.o
+batman-adv-y += tp_meter.o
batman-adv-y += translation-table.o
diff --git a/net/batman-adv/icmp_socket.c b/net/batman-adv/icmp_socket.c
index 98b4f72..08f0a9c 100644
--- a/net/batman-adv/icmp_socket.c
+++ b/net/batman-adv/icmp_socket.c
@@ -48,6 +48,7 @@
#include "originator.h"
#include "packet.h"
#include "send.h"
+#include "tp_meter.h"
static struct batadv_socket_client *batadv_socket_client_hash[256];
@@ -57,6 +58,7 @@ static void batadv_socket_add_packet(struct batadv_socket_client *socket_client,
void batadv_socket_init(void)
{
memset(batadv_socket_client_hash, 0, sizeof(batadv_socket_client_hash));
+ batadv_tp_meter_init();
}
static int batadv_socket_open(struct inode *inode, struct file *file)
@@ -191,8 +193,19 @@ batadv_socket_write_user(struct batadv_priv *bat_priv,
if (copy_from_user(&icmp_user_packet, buff, len))
return -EFAULT;
- /* no command supported yet! */
- len = -EINVAL;
+ switch (icmp_user_packet.cmd_type) {
+ case BATADV_TP_START:
+ batadv_tp_start(socket_client, icmp_user_packet.dst,
+ icmp_user_packet.arg1);
+ break;
+ case BATADV_TP_STOP:
+ batadv_tp_stop(bat_priv, icmp_user_packet.dst,
+ BATADV_TP_SIGINT);
+ break;
+ default:
+ len = -EINVAL;
+ break;
+ }
return len;
}
diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index fe4d711..343c9a3 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -141,6 +141,7 @@ int batadv_mesh_init(struct net_device *soft_iface)
spin_lock_init(&bat_priv->tvlv.container_list_lock);
spin_lock_init(&bat_priv->tvlv.handler_list_lock);
spin_lock_init(&bat_priv->softif_vlan_list_lock);
+ spin_lock_init(&bat_priv->tp_list_lock);
INIT_HLIST_HEAD(&bat_priv->forw_bat_list);
INIT_HLIST_HEAD(&bat_priv->forw_bcast_list);
@@ -159,6 +160,7 @@ int batadv_mesh_init(struct net_device *soft_iface)
INIT_HLIST_HEAD(&bat_priv->tvlv.container_list);
INIT_HLIST_HEAD(&bat_priv->tvlv.handler_list);
INIT_HLIST_HEAD(&bat_priv->softif_vlan_list);
+ INIT_HLIST_HEAD(&bat_priv->tp_list);
ret = batadv_v_mesh_init(bat_priv);
if (ret < 0)
diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
index db45336..af36f78 100644
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -100,6 +100,9 @@
#define BATADV_NUM_BCASTS_WIRELESS 3
#define BATADV_NUM_BCASTS_MAX 3
+/* length of the single packet used by the TP meter */
+#define BATADV_TP_PACKET_LEN ETH_DATA_LEN
+
/* msecs after which an ARP_REQUEST is sent in broadcast as fallback */
#define ARP_REQ_DELAY 250
/* numbers of originator to contact for any PUT/GET DHT operation */
@@ -129,6 +132,11 @@
#define BATADV_NC_NODE_TIMEOUT 10000 /* Milliseconds */
+/**
+ * BATADV_TP_MAX_NUM - maximum number of simultaneously active tp sessions
+ */
+#define BATADV_TP_MAX_NUM 5
+
enum batadv_mesh_state {
BATADV_MESH_INACTIVE,
BATADV_MESH_ACTIVE,
@@ -227,16 +235,18 @@ __be32 batadv_skb_crc32(struct sk_buff *skb, u8 *payload_ptr);
* @BATADV_DBG_BLA: bridge loop avoidance messages
* @BATADV_DBG_DAT: ARP snooping and DAT related messages
* @BATADV_DBG_NC: network coding related messages
+ * @BATADV_DBG_TP_METER: throughput meter messages
* @BATADV_DBG_ALL: the union of all the above log levels
*/
enum batadv_dbg_level {
- BATADV_DBG_BATMAN = BIT(0),
- BATADV_DBG_ROUTES = BIT(1),
- BATADV_DBG_TT = BIT(2),
- BATADV_DBG_BLA = BIT(3),
- BATADV_DBG_DAT = BIT(4),
- BATADV_DBG_NC = BIT(5),
- BATADV_DBG_ALL = 63,
+ BATADV_DBG_BATMAN = BIT(0),
+ BATADV_DBG_ROUTES = BIT(1),
+ BATADV_DBG_TT = BIT(2),
+ BATADV_DBG_BLA = BIT(3),
+ BATADV_DBG_DAT = BIT(4),
+ BATADV_DBG_NC = BIT(5),
+ BATADV_DBG_TP_METER = BIT(6),
+ BATADV_DBG_ALL = 127,
};
#ifdef CONFIG_BATMAN_ADV_DEBUG
diff --git a/net/batman-adv/packet.h b/net/batman-adv/packet.h
index 15da9e1..932eacb 100644
--- a/net/batman-adv/packet.h
+++ b/net/batman-adv/packet.h
@@ -21,6 +21,8 @@
#include <asm/byteorder.h>
#include <linux/types.h>
+#define batadv_tp_is_error(n) ((u8)n > 127 ? 1 : 0)
+
/**
* enum batadv_packettype - types for batman-adv encapsulated packets
* @BATADV_IV_OGM: originator messages for B.A.T.M.A.N. IV
@@ -93,6 +95,7 @@ enum batadv_icmp_packettype {
BATADV_ECHO_REQUEST = 8,
BATADV_TTL_EXCEEDED = 11,
BATADV_PARAMETER_PROBLEM = 12,
+ BATADV_TP = 15,
};
/**
@@ -299,6 +302,16 @@ struct batadv_icmp_user_packet {
};
/**
+ * enum batadv_icmp_user_cmd_type - types for batman-adv icmp cmd modes
+ * @BATADV_TP_START: start a throughput meter run
+ * @BATADV_TP_STOP: stop a throughput meter run
+ */
+enum batadv_icmp_user_cmd_type {
+ BATADV_TP_START = 0,
+ BATADV_TP_STOP = 2,
+};
+
+/**
* struct batadv_icmp_header - common members among all the ICMP packets
* @packet_type: batman-adv packet type, part of the general header
* @version: batman-adv protocol version, part of the genereal header
@@ -348,6 +361,98 @@ struct batadv_icmp_packet {
__be16 seqno;
};
+/**
+ * struct batadv_icmp_tp_packet - ICMP TP Meter packet
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the genereal header
+ * @ttl: time to live for this packet, part of the genereal header
+ * @msg_type: ICMP packet type
+ * @dst: address of the destination node
+ * @orig: address of the source node
+ * @uid: local ICMP socket identifier
+ * @subtype: TP packet subtype (see batadv_icmp_tp_subtype)
+ * @session: TP session identifier
+ * @seqno: the TP sequence number
+ * @timestamp: time when the packet has been sent. This value is filled in a
+ * TP_MSG and echoed back in the next TP_ACK so that the sender can compute the
+ * RTT. Since it is read only by the host which wrote it, there is no need to
+ * store it using network order
+ */
+struct batadv_icmp_tp_packet {
+ u8 packet_type;
+ u8 version;
+ u8 ttl;
+ u8 msg_type; /* see ICMP message types above */
+ u8 dst[ETH_ALEN];
+ u8 orig[ETH_ALEN];
+ u8 uid;
+ u8 subtype;
+ u8 session[2];
+ __be32 seqno;
+ __be32 timestamp;
+};
+
+/**
+ * enum batadv_icmp_tp_subtype - ICMP TP Meter packet subtypes
+ * @BATADV_TP_MSG: Msg from sender to receiver
+ * @BATADV_TP_ACK: acknowledgment from receiver to sender
+ */
+enum batadv_icmp_tp_subtype {
+ BATADV_TP_MSG = 0,
+ BATADV_TP_ACK,
+};
+
+/**
+ * struct batadv_icmp_tp_result_packet - tp response returned to batctl
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the genereal header
+ * @ttl: time to live for this packet, part of the genereal header
+ * @msg_type: ICMP packet type
+ * @dst: address of the destination node
+ * @orig: address of the source node
+ * @uid: local ICMP socket identifier
+ * @reserved: not used - useful for alignment
+ * @return_value: result of run (see batadv_tp_meter_status)
+ * @test_time: time (msec) the run took
+ * @total_bytes: amount of acked bytes during run
+ */
+struct batadv_icmp_tp_result_packet {
+ u8 packet_type;
+ u8 version;
+ u8 ttl;
+ u8 msg_type; /* see ICMP message types above */
+ u8 dst[ETH_ALEN];
+ u8 orig[ETH_ALEN];
+ u8 uid;
+ u8 reserved[2];
+ u8 return_value;
+ u32 test_time;
+ u32 total_bytes;
+};
+
+/**
+ * enum batadv_tp_meter_reason - reason of a a tp meter test run stop
+ * @BATADV_TP_COMPLETE: sender finished tp run
+ * @BATADV_TP_SIGINT: sender was stopped during run
+ * @BATADV_TP_DST_UNREACHABLE: receiver could not be reached or didn't answer
+ * @BATADV_TP_RESEND_LIMIT: (unused) sender retry reached limit
+ * @BATADV_TP_ALREADY_ONGOING: test to or from the same node already ongoing
+ * @BATADV_TP_MEMORY_ERROR: test was stopped due to low memory
+ * @BATADV_TP_CANT_SEND: failed to send via outgoing interface
+ * @BATADV_TP_TOO_MANY: too many ongoing sessions
+ */
+enum batadv_tp_meter_reason {
+ BATADV_TP_COMPLETE = 3,
+ BATADV_TP_SIGINT = 4,
+ /* error status >= 128 */
+ BATADV_TP_DST_UNREACHABLE = 128,
+ BATADV_TP_RESEND_LIMIT = 129,
+ BATADV_TP_ALREADY_ONGOING = 130,
+ BATADV_TP_MEMORY_ERROR = 131,
+ BATADV_TP_CANT_SEND = 132,
+ BATADV_TP_TOO_MANY = 133,
+};
+
#define BATADV_RR_LEN 16
/**
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index e38c97f..bbec7cf 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -45,6 +45,7 @@
#include "packet.h"
#include "send.h"
#include "soft-interface.h"
+#include "tp_meter.h"
#include "translation-table.h"
static int batadv_route_unicast_packet(struct sk_buff *skb,
@@ -233,7 +234,6 @@ static int batadv_recv_my_icmp_packet(struct batadv_priv *bat_priv,
/* receive the packet */
if (skb_linearize(skb) < 0)
break;
-
batadv_socket_receive_packet(icmph, skb->len);
break;
case BATADV_ECHO_REQUEST:
@@ -266,6 +266,13 @@ static int batadv_recv_my_icmp_packet(struct batadv_priv *bat_priv,
ret = NET_RX_SUCCESS;
break;
+ case BATADV_TP:
+ if (!pskb_may_pull(skb, sizeof(struct batadv_icmp_tp_packet)))
+ goto out;
+
+ batadv_tp_meter_recv(bat_priv, skb);
+ ret = NET_RX_SUCCESS;
+ goto out;
default:
/* drop unknown type */
goto out;
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 0710379..b7f659a 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -820,6 +820,8 @@ static int batadv_softif_init_late(struct net_device *dev)
#ifdef CONFIG_BATMAN_ADV_BLA
atomic_set(&bat_priv->bla.num_requests, 0);
#endif
+ atomic_set(&bat_priv->tp_num, 0);
+
bat_priv->tt.last_changeset = NULL;
bat_priv->tt.last_changeset_len = 0;
bat_priv->isolation_mark = 0;
diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c
new file mode 100644
index 0000000..3d25976
--- /dev/null
+++ b/net/batman-adv/tp_meter.c
@@ -0,0 +1,1451 @@
+/* Copyright (C) 2012-2016 B.A.T.M.A.N. contributors:
+ *
+ * Edo Monticelli, Antonio Quartulli
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "tp_meter.h"
+#include "main.h"
+
+#include <linux/atomic.h>
+#include <linux/bug.h>
+#include <linux/byteorder/generic.h>
+#include <linux/cache.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/fs.h>
+#include <linux/if_ether.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/param.h>
+#include <linux/printk.h>
+#include <linux/random.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include "hard-interface.h"
+#include "icmp_socket.h"
+#include "originator.h"
+#include "send.h"
+#include "packet.h"
+
+/**
+ * BATADV_TP_DEF_TEST_LENGTH - Default test length if not specified by the user
+ * in milliseconds
+ */
+#define BATADV_TP_DEF_TEST_LENGTH 10000
+
+/**
+ * BATADV_TP_AWND - Advertised window by the receiver (in bytes)
+ */
+#define BATADV_TP_AWND 0x20000000
+
+/**
+ * BATADV_TP_RECV_TIMEOUT - Receiver activity timeout. If the receiver does not
+ * get anything for such amount of milliseconds, the connection is killed
+ */
+#define BATADV_TP_RECV_TIMEOUT 1000
+
+/**
+ * BATADV_TP_MAX_RTO - Maximum sender timeout. If the sender RTO gets beyond
+ * such amound of milliseconds, the receiver is considered unreachable and the
+ * connection is killed
+ */
+#define BATADV_TP_MAX_RTO 30000
+
+/**
+ * BATADV_TP_FIRST_SEQ - First seqno of each session. The number is rather high
+ * in order to immediately trigger a wrap around (test purposes)
+ */
+#define BATADV_TP_FIRST_SEQ ((u32)-1 - 2000)
+
+/**
+ * BATADV_TP_PLEN - length of the payload (data after the batadv_unicast header)
+ * to simulate
+ */
+#define BATADV_TP_PLEN 1450
+
+static u8 batadv_tp_prerandom[4096] __read_mostly;
+
+/**
+ * batadv_tp_cwnd - compute the new cwnd size
+ * @base: base cwnd size value
+ * @increment: the value to add to base to get the new size
+ * @min: minumim cwnd value (usually MSS)
+ *
+ * Return the new cwnd size and ensures it does not exceed the Advertised
+ * Receiver Window size. It is wrap around safe.
+ * For details refer to Section 3.1 of RFC5681
+ *
+ * Return: new congestion window size in bytes
+ */
+static u32 batadv_tp_cwnd(u32 base, u32 increment, u32 min)
+{
+ u32 new_size = base + increment;
+
+ /* check for wrap-around */
+ if (new_size < base)
+ new_size = (u32)ULONG_MAX;
+
+ new_size = min_t(u32, new_size, BATADV_TP_AWND);
+
+ return max_t(u32, new_size, min);
+}
+
+/**
+ * batadv_tp_updated_cwnd - update the Congestion Windows
+ * @tp_vars: the private data of the current TP meter session
+ * @mss: maximum segment size of transmission
+ *
+ * 1) if the session is in Slow Start, the CWND has to be increased by 1
+ * MSS every unique received ACK
+ * 2) if the session is in Congestion Avoidance, the CWND has to be
+ * increased by MSS * MSS / CWND for every unique received ACK
+ */
+static void batadv_tp_update_cwnd(struct batadv_tp_vars *tp_vars, u32 mss)
+{
+ spin_lock_bh(&tp_vars->cwnd_lock);
+
+ /* slow start... */
+ if (tp_vars->cwnd <= tp_vars->ss_threshold) {
+ tp_vars->dec_cwnd = 0;
+ tp_vars->cwnd = batadv_tp_cwnd(tp_vars->cwnd, mss, mss);
+ spin_unlock_bh(&tp_vars->cwnd_lock);
+ return;
+ }
+
+ /* increment CWND at least of 1 (section 3.1 of RFC5681) */
+ tp_vars->dec_cwnd += max_t(u32, 1U << 3,
+ ((mss * mss) << 6) / (tp_vars->cwnd << 3));
+ if (tp_vars->dec_cwnd < (mss << 3)) {
+ spin_unlock_bh(&tp_vars->cwnd_lock);
+ return;
+ }
+
+ tp_vars->cwnd = batadv_tp_cwnd(tp_vars->cwnd, mss, mss);
+ tp_vars->dec_cwnd = 0;
+
+ spin_unlock_bh(&tp_vars->cwnd_lock);
+}
+
+/**
+ * batadv_tp_update_rto - calculate new retransmission timeout
+ * @tp_vars: the private data of the current TP meter session
+ * @new_rtt: new roundtrip time in msec
+ */
+static void batadv_tp_update_rto(struct batadv_tp_vars *tp_vars,
+ u32 new_rtt)
+{
+ long m = new_rtt;
+
+ /* RTT update
+ * Details in Section 2.2 and 2.3 of RFC6298
+ *
+ * It's tricky to understand. Don't lose hair please.
+ * Inspired by tcp_rtt_estimator() tcp_input.c
+ */
+ if (tp_vars->srtt != 0) {
+ m -= (tp_vars->srtt >> 3); /* m is now error in rtt est */
+ tp_vars->srtt += m; /* rtt = 7/8 srtt + 1/8 new */
+ if (m < 0)
+ m = -m;
+
+ m -= (tp_vars->rttvar >> 2);
+ tp_vars->rttvar += m; /* mdev ~= 3/4 rttvar + 1/4 new */
+ } else {
+ /* first measure getting in */
+ tp_vars->srtt = m << 3; /* take the measured time to be srtt */
+ tp_vars->rttvar = m << 1; /* new_rtt / 2 */
+ }
+
+ /* rto = srtt + 4 * rttvar.
+ * rttvar is scaled by 4, therefore doesn't need to be multiplied
+ */
+ tp_vars->rto = (tp_vars->srtt >> 3) + tp_vars->rttvar;
+}
+
+/**
+ * batadv_tp_batctl_notify - send client status result over icmp socket
+ * @reason: reason for tp meter session stop
+ * @uid: local ICMP socket identifier
+ * @start_time: start of transmission in jiffies
+ * @total_sent: bytes acked to the receiver
+ */
+static void batadv_tp_batctl_notify(enum batadv_tp_meter_reason reason, u8 uid,
+ unsigned long start_time, u32 total_sent)
+{
+ struct batadv_icmp_tp_result_packet result;
+
+ memset(&result, 0, sizeof(result));
+ result.uid = uid;
+
+ if (!batadv_tp_is_error(reason)) {
+ result.return_value = BATADV_TP_COMPLETE;
+ result.test_time = jiffies_to_msecs(jiffies - start_time);
+ result.total_bytes = total_sent;
+ } else {
+ result.return_value = reason;
+ }
+
+ batadv_socket_receive_packet(&result, sizeof(result));
+}
+
+/**
+ * batadv_tp_batctl_error_notify - send client error result over icmp socket
+ * @reason: reason for tp meter session stop
+ * @uid: local ICMP socket identifier
+ */
+static void batadv_tp_batctl_error_notify(enum batadv_tp_meter_reason reason,
+ u8 uid)
+{
+ batadv_tp_batctl_notify(reason, uid, 0, 0);
+}
+
+/**
+ * batadv_tp_list_find - find a tp_vars object in the global list
+ * @bat_priv: the bat priv with all the soft interface information
+ * @dst: the other endpoint MAC address to look for
+ *
+ * Look for a tp_vars object matching dst as end_point and return it after
+ * having incremented the refcounter. Return NULL is not found
+ *
+ * Return: matching tp_vars or NULL when no tp_vars with @dst was found
+ */
+static struct batadv_tp_vars *batadv_tp_list_find(struct batadv_priv *bat_priv,
+ const u8 *dst)
+{
+ struct batadv_tp_vars *pos, *tp_vars = NULL;
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(pos, &bat_priv->tp_list, list) {
+ if (!batadv_compare_eth(pos->other_end, dst))
+ continue;
+
+ /* most of the time this function is invoked during the normal
+ * process..it makes sens to pay more when the session is
+ * finished and to speed the process up during the measurement
+ */
+ if (unlikely(!kref_get_unless_zero(&pos->refcount)))
+ continue;
+
+ tp_vars = pos;
+ break;
+ }
+ rcu_read_unlock();
+
+ return tp_vars;
+}
+
+/**
+ * batadv_tp_list_find_session - find tp_vars session object in the global list
+ * @bat_priv: the bat priv with all the soft interface information
+ * @dst: the other endpoint MAC address to look for
+ * @session: session identifier
+ *
+ * Look for a tp_vars object matching dst as end_point, session as tp meter
+ * session and return it after having incremented the refcounter. Return NULL
+ * is not found
+ *
+ * Return: matching tp_vars or NULL when no tp_vars was found
+ */
+static struct batadv_tp_vars *
+batadv_tp_list_find_session(struct batadv_priv *bat_priv, const u8 *dst,
+ const u8 *session)
+{
+ struct batadv_tp_vars *pos, *tp_vars = NULL;
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(pos, &bat_priv->tp_list, list) {
+ if (!batadv_compare_eth(pos->other_end, dst))
+ continue;
+
+ if (memcmp(pos->session, session, sizeof(pos->session)) != 0)
+ continue;
+
+ /* most of the time this function is invoked during the normal
+ * process..it makes sense to pay more when the session is
+ * finished and to speed the process up during the measurement
+ */
+ if (unlikely(!kref_get_unless_zero(&pos->refcount)))
+ continue;
+
+ tp_vars = pos;
+ break;
+ }
+ rcu_read_unlock();
+
+ return tp_vars;
+}
+
+/**
+ * batadv_tp_vars_release - release batadv_tp_vars from lists and queue for
+ * free after rcu grace period
+ * @ref: kref pointer of the batadv_tp_vars
+ */
+static void batadv_tp_vars_release(struct kref *ref)
+{
+ struct batadv_tp_vars *tp_vars;
+ struct batadv_tp_unacked *un, *safe;
+
+ tp_vars = container_of(ref, struct batadv_tp_vars, refcount);
+
+ /* lock should not be needed because this object is now out of any
+ * context!
+ */
+ spin_lock_bh(&tp_vars->unacked_lock);
+ list_for_each_entry_safe(un, safe, &tp_vars->unacked_list, list) {
+ list_del(&un->list);
+ kfree(un);
+ }
+ spin_unlock_bh(&tp_vars->unacked_lock);
+
+ kfree_rcu(tp_vars, rcu);
+}
+
+/**
+ * batadv_tp_vars_put - decrement the batadv_tp_vars refcounter and possibly
+ * release it
+ * @tp_vars: the private data of the current TP meter session to be free'd
+ */
+static void batadv_tp_vars_put(struct batadv_tp_vars *tp_vars)
+{
+ kref_put(&tp_vars->refcount, batadv_tp_vars_release);
+}
+
+/**
+ * batadv_tp_sender_cleanup - cleanup sender data and drop and timer
+ * @bat_priv: the bat priv with all the soft interface information
+ * @tp_vars: the private data of the current TP meter session to cleanup
+ */
+static void batadv_tp_sender_cleanup(struct batadv_priv *bat_priv,
+ struct batadv_tp_vars *tp_vars)
+{
+ cancel_delayed_work(&tp_vars->finish_work);
+
+ spin_lock_bh(&tp_vars->bat_priv->tp_list_lock);
+ hlist_del_rcu(&tp_vars->list);
+ spin_unlock_bh(&tp_vars->bat_priv->tp_list_lock);
+
+ /* drop list reference */
+ batadv_tp_vars_put(tp_vars);
+
+ atomic_dec(&tp_vars->bat_priv->tp_num);
+
+ /* kill the timer and remove its reference */
+ del_timer_sync(&tp_vars->timer);
+ /* the worker might have rearmed itself therefore we kill it again. Note
+ * that if the worker should run again before invoking the following
+ * del_timer(), it would not re-arm itself once again because the status
+ * is OFF now
+ */
+ del_timer(&tp_vars->timer);
+ batadv_tp_vars_put(tp_vars);
+}
+
+/**
+ * batadv_tp_sender_end - print info about ended session and inform client
+ * @bat_priv: the bat priv with all the soft interface information
+ * @tp_vars: the private data of the current TP meter session
+ */
+static void batadv_tp_sender_end(struct batadv_priv *bat_priv,
+ struct batadv_tp_vars *tp_vars)
+{
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Test towards %pM finished..shutting down (reason=%d)\n",
+ tp_vars->other_end, tp_vars->reason);
+
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Last timing stats: SRTT=%ums RTTVAR=%ums RTO=%ums\n",
+ tp_vars->srtt >> 3, tp_vars->rttvar >> 2, tp_vars->rto);
+
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Final values: cwnd=%u ss_threshold=%u\n",
+ tp_vars->cwnd, tp_vars->ss_threshold);
+
+ batadv_tp_batctl_notify(tp_vars->reason,
+ tp_vars->socket_client->index,
+ tp_vars->start_time,
+ atomic_read(&tp_vars->tot_sent));
+}
+
+/**
+ * batadv_tp_sender_shutdown - let sender thread/timer stop gracefully
+ * @tp_vars: the private data of the current TP meter session
+ * @reason: reason for tp meter session stop
+ */
+static void batadv_tp_sender_shutdown(struct batadv_tp_vars *tp_vars,
+ enum batadv_tp_meter_reason reason)
+{
+ if (!atomic_dec_and_test(&tp_vars->sending))
+ return;
+
+ tp_vars->reason = reason;
+}
+
+/**
+ * batadv_tp_sender_finish - stop sender session after test_length was reached
+ * @work: delayed work reference of the related tp_vars
+ */
+static void batadv_tp_sender_finish(struct work_struct *work)
+{
+ struct delayed_work *delayed_work;
+ struct batadv_tp_vars *tp_vars;
+
+ delayed_work = to_delayed_work(work);
+ tp_vars = container_of(delayed_work, struct batadv_tp_vars,
+ finish_work);
+
+ batadv_tp_sender_shutdown(tp_vars, BATADV_TP_COMPLETE);
+}
+
+/**
+ * batadv_tp_reset_sender_timer - reschedule the sender timer
+ * @tp_vars: the private TP meter data for this session
+ *
+ * Reschedule the timer using tp_vars->rto as delay
+ */
+static void batadv_tp_reset_sender_timer(struct batadv_tp_vars *tp_vars)
+{
+ /* most of the time this function is invoked while normal packet
+ * reception...
+ */
+ if (unlikely(atomic_read(&tp_vars->sending) == 0))
+ /* timer ref will be dropped in batadv_tp_sender_cleanup */
+ return;
+
+ mod_timer(&tp_vars->timer, jiffies + msecs_to_jiffies(tp_vars->rto));
+}
+
+/**
+ * batadv_tp_sender_timeout - timer that fires in case of packet loss
+ * @arg: address of the related tp_vars
+ *
+ * If fired it means that there was packet loss.
+ * Switch to Slow Start, set the ss_threshold to half of the current cwnd and
+ * reset the cwnd to 3*MSS
+ */
+static void batadv_tp_sender_timeout(unsigned long arg)
+{
+ struct batadv_tp_vars *tp_vars = (struct batadv_tp_vars *)arg;
+ struct batadv_priv *bat_priv = tp_vars->bat_priv;
+
+ if (atomic_read(&tp_vars->sending) == 0)
+ return;
+
+ /* if the user waited long enough...shutdown the test */
+ if (unlikely(tp_vars->rto >= BATADV_TP_MAX_RTO)) {
+ batadv_tp_sender_shutdown(tp_vars, BATADV_TP_DST_UNREACHABLE);
+ return;
+ }
+
+ /* RTO exponential backoff
+ * Details in Section 5.5 of RFC6298
+ */
+ tp_vars->rto <<= 1;
+
+ spin_lock_bh(&tp_vars->cwnd_lock);
+
+ tp_vars->ss_threshold = tp_vars->cwnd >> 1;
+ if (tp_vars->ss_threshold < BATADV_TP_PLEN * 2)
+ tp_vars->ss_threshold = BATADV_TP_PLEN * 2;
+
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: RTO fired during test towards %pM! cwnd=%u new ss_thr=%u, resetting last_sent to %u\n",
+ tp_vars->other_end, tp_vars->cwnd, tp_vars->ss_threshold,
+ atomic_read(&tp_vars->last_acked));
+
+ tp_vars->cwnd = BATADV_TP_PLEN * 3;
+
+ spin_unlock_bh(&tp_vars->cwnd_lock);
+
+ /* resend the non-ACKed packets.. */
+ tp_vars->last_sent = atomic_read(&tp_vars->last_acked);
+ wake_up(&tp_vars->more_bytes);
+
+ batadv_tp_reset_sender_timer(tp_vars);
+}
+
+/**
+ * batadv_tp_fill_prerandom - Fill buffer with prefetched random bytes
+ * @tp_vars: the private TP meter data for this session
+ * @buf: Buffer to fill with bytes
+ * @nbytes: amount of pseudorandom bytes
+ */
+static void batadv_tp_fill_prerandom(struct batadv_tp_vars *tp_vars,
+ u8 *buf, size_t nbytes)
+{
+ u32 local_offset;
+ size_t bytes_inbuf;
+ size_t to_copy;
+ size_t pos = 0;
+
+ spin_lock_bh(&tp_vars->prerandom_lock);
+ local_offset = tp_vars->prerandom_offset;
+ tp_vars->prerandom_offset += nbytes;
+ tp_vars->prerandom_offset %= sizeof(batadv_tp_prerandom);
+ spin_unlock_bh(&tp_vars->prerandom_lock);
+
+ while (nbytes) {
+ local_offset %= sizeof(batadv_tp_prerandom);
+ bytes_inbuf = sizeof(batadv_tp_prerandom) - local_offset;
+ to_copy = min(nbytes, bytes_inbuf);
+
+ memcpy(&buf[pos], &batadv_tp_prerandom[local_offset], to_copy);
+ pos += to_copy;
+ nbytes -= to_copy;
+ local_offset = 0;
+ }
+}
+
+/**
+ * batadv_tp_send_msg - send a single message
+ * @tp_vars: the private TP meter data for this session
+ * @src: source mac address
+ * @orig_node: the originator of the destination
+ * @seqno: sequence number of this packet
+ * @len: length of the entire packet
+ * @session: session identifier
+ * @socket_index: local ICMP socket identifier
+ * @timestamp: timestamp in jiffies which is replied in ack
+ *
+ * Create and send a single TP Meter message.
+ *
+ * Return: 0 on success, BATADV_TP_DST_UNREACHABLE if the destination is not
+ * reachable, BATADV_TP_MEMORY_ERROR if the packet couldn't be allocated
+ */
+static int batadv_tp_send_msg(struct batadv_tp_vars *tp_vars, const u8 *src,
+ struct batadv_orig_node *orig_node,
+ u32 seqno, size_t len, const u8 *session,
+ int socket_index, u32 timestamp)
+{
+ struct batadv_icmp_tp_packet *icmp;
+ struct sk_buff *skb;
+ int r;
+ u8 *data;
+ size_t data_len;
+
+ skb = netdev_alloc_skb_ip_align(NULL, len + ETH_HLEN);
+ if (unlikely(!skb))
+ return BATADV_TP_MEMORY_ERROR;
+
+ skb_reserve(skb, ETH_HLEN);
+ icmp = (struct batadv_icmp_tp_packet *)skb_put(skb, sizeof(*icmp));
+
+ /* fill the icmp header */
+ ether_addr_copy(icmp->dst, orig_node->orig);
+ ether_addr_copy(icmp->orig, src);
+ icmp->version = BATADV_COMPAT_VERSION;
+ icmp->packet_type = BATADV_ICMP;
+ icmp->ttl = BATADV_TTL;
+ icmp->msg_type = BATADV_TP;
+ icmp->uid = socket_index;
+
+ icmp->subtype = BATADV_TP_MSG;
+ memcpy(icmp->session, session, sizeof(icmp->session));
+ icmp->seqno = htonl(seqno);
+ icmp->timestamp = htonl(timestamp);
+
+ data_len = len - sizeof(*icmp);
+ data = (u8 *)skb_put(skb, data_len);
+ batadv_tp_fill_prerandom(tp_vars, data, data_len);
+
+ r = batadv_send_skb_to_orig(skb, orig_node, NULL);
+ if (r < 0)
+ kfree_skb(skb);
+
+ if (r == NET_XMIT_SUCCESS)
+ return 0;
+
+ return BATADV_TP_CANT_SEND;
+}
+
+/**
+ * batadv_tp_recv_ack - ACK receiving function
+ * @bat_priv: the bat priv with all the soft interface information
+ * @skb: the buffer containing the received packet
+ *
+ * Process a received TP ACK packet
+ */
+static void batadv_tp_recv_ack(struct batadv_priv *bat_priv,
+ const struct sk_buff *skb)
+{
+ struct batadv_hard_iface *primary_if = NULL;
+ struct batadv_orig_node *orig_node = NULL;
+ const struct batadv_icmp_tp_packet *icmp;
+ struct batadv_tp_vars *tp_vars;
+ size_t packet_len, mss;
+ u32 rtt, recv_ack, cwnd;
+ unsigned char *dev_addr;
+
+ packet_len = BATADV_TP_PLEN;
+ mss = BATADV_TP_PLEN;
+ packet_len += sizeof(struct batadv_unicast_packet);
+
+ icmp = (struct batadv_icmp_tp_packet *)skb->data;
+
+ /* find the tp_vars */
+ tp_vars = batadv_tp_list_find_session(bat_priv, icmp->orig,
+ icmp->session);
+ if (unlikely(!tp_vars))
+ return;
+
+ if (unlikely(atomic_read(&tp_vars->sending) == 0))
+ goto out;
+
+ /* old ACK? silently drop it.. */
+ if (batadv_seq_before(ntohl(icmp->seqno),
+ (u32)atomic_read(&tp_vars->last_acked)))
+ goto out;
+
+ primary_if = batadv_primary_if_get_selected(bat_priv);
+ if (unlikely(!primary_if))
+ goto out;
+
+ orig_node = batadv_orig_hash_find(bat_priv, icmp->orig);
+ if (unlikely(!orig_node))
+ goto out;
+
+ /* update RTO with the new sampled RTT, if any */
+ rtt = jiffies_to_msecs(jiffies) - ntohl(icmp->timestamp);
+ if (icmp->timestamp && rtt)
+ batadv_tp_update_rto(tp_vars, rtt);
+
+ /* ACK for new data... reset the timer */
+ batadv_tp_reset_sender_timer(tp_vars);
+
+ recv_ack = ntohl(icmp->seqno);
+
+ /* check if this ACK is a duplicate */
+ if (atomic_read(&tp_vars->last_acked) == recv_ack) {
+ atomic_inc(&tp_vars->dup_acks);
+ if (atomic_read(&tp_vars->dup_acks) != 3)
+ goto out;
+
+ if (recv_ack >= tp_vars->recover)
+ goto out;
+
+ /* if this is the third duplicate ACK do Fast Retransmit */
+ batadv_tp_send_msg(tp_vars, primary_if->net_dev->dev_addr,
+ orig_node, recv_ack, packet_len,
+ icmp->session, icmp->uid,
+ jiffies_to_msecs(jiffies));
+
+ spin_lock_bh(&tp_vars->cwnd_lock);
+
+ /* Fast Recovery */
+ tp_vars->fast_recovery = true;
+ /* Set recover to the last outstanding seqno when Fast Recovery
+ * is entered. RFC6582, Section 3.2, step 1
+ */
+ tp_vars->recover = tp_vars->last_sent;
+ tp_vars->ss_threshold = tp_vars->cwnd >> 1;
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: Fast Recovery, (cur cwnd=%u) ss_thr=%u last_sent=%u recv_ack=%u\n",
+ tp_vars->cwnd, tp_vars->ss_threshold,
+ tp_vars->last_sent, recv_ack);
+ tp_vars->cwnd = batadv_tp_cwnd(tp_vars->ss_threshold, 3 * mss,
+ mss);
+ tp_vars->dec_cwnd = 0;
+ tp_vars->last_sent = recv_ack;
+
+ spin_unlock_bh(&tp_vars->cwnd_lock);
+ } else {
+ /* count the acked data */
+ atomic_add(recv_ack - atomic_read(&tp_vars->last_acked),
+ &tp_vars->tot_sent);
+ /* reset the duplicate ACKs counter */
+ atomic_set(&tp_vars->dup_acks, 0);
+
+ if (tp_vars->fast_recovery) {
+ /* partial ACK */
+ if (batadv_seq_before(recv_ack, tp_vars->recover)) {
+ /* this is another hole in the window. React
+ * immediately as specified by NewReno (see
+ * Section 3.2 of RFC6582 for details)
+ */
+ dev_addr = primary_if->net_dev->dev_addr;
+ batadv_tp_send_msg(tp_vars, dev_addr,
+ orig_node, recv_ack,
+ packet_len, icmp->session,
+ icmp->uid,
+ jiffies_to_msecs(jiffies));
+ tp_vars->cwnd = batadv_tp_cwnd(tp_vars->cwnd,
+ mss, mss);
+ } else {
+ tp_vars->fast_recovery = false;
+ /* set cwnd to the value of ss_threshold at the
+ * moment that Fast Recovery was entered.
+ * RFC6582, Section 3.2, step 3
+ */
+ cwnd = batadv_tp_cwnd(tp_vars->ss_threshold, 0,
+ mss);
+ tp_vars->cwnd = cwnd;
+ }
+ goto move_twnd;
+ }
+
+ if (recv_ack - atomic_read(&tp_vars->last_acked) >= mss)
+ batadv_tp_update_cwnd(tp_vars, mss);
+move_twnd:
+ /* move the Transmit Window */
+ atomic_set(&tp_vars->last_acked, recv_ack);
+ }
+
+ wake_up(&tp_vars->more_bytes);
+out:
+ if (likely(primary_if))
+ batadv_hardif_put(primary_if);
+ if (likely(orig_node))
+ batadv_orig_node_put(orig_node);
+ if (likely(tp_vars))
+ batadv_tp_vars_put(tp_vars);
+}
+
+/**
+ * batadv_tp_avail - check if congestion window is not full
+ * @tp_vars: the private data of the current TP meter session
+ * @payload_len: size of the payload of a single message
+ *
+ * Return: true when congestion window is not full, false otherwise
+ */
+static bool batadv_tp_avail(struct batadv_tp_vars *tp_vars,
+ size_t payload_len)
+{
+ u32 win_left, win_limit;
+
+ win_limit = atomic_read(&tp_vars->last_acked) + tp_vars->cwnd;
+ win_left = win_limit - tp_vars->last_sent;
+
+ return win_left >= payload_len;
+}
+
+/**
+ * batadv_tp_wait_available - wait until congestion window becomes free or
+ * timeout is reached
+ * @tp_vars: the private data of the current TP meter session
+ * @plen: size of the payload of a single message
+ *
+ * Return: 0 if the condition evaluated to false after the timeout elapsed,
+ * 1 if the condition evaluated to true after the timeout elapsed, the
+ * remaining jiffies (at least 1) if the condition evaluated to true before
+ * the timeout elapsed, or -ERESTARTSYS if it was interrupted by a signal.
+ */
+static int batadv_tp_wait_available(struct batadv_tp_vars *tp_vars, size_t plen)
+{
+ int ret;
+
+ ret = wait_event_interruptible_timeout(tp_vars->more_bytes,
+ batadv_tp_avail(tp_vars, plen),
+ HZ / 10);
+
+ return ret;
+}
+
+/**
+ * batadv_tp_send - main sending thread of a tp meter session
+ * @arg: address of the related tp_vars
+ *
+ * Return: nothing, this function never returns
+ */
+static int batadv_tp_send(void *arg)
+{
+ struct batadv_tp_vars *tp_vars = arg;
+ struct batadv_priv *bat_priv = tp_vars->bat_priv;
+ struct batadv_hard_iface *primary_if = NULL;
+ struct batadv_orig_node *orig_node = NULL;
+ size_t payload_len, packet_len;
+ int err = 0;
+
+ if (unlikely(tp_vars->role != BATADV_TP_SENDER)) {
+ err = BATADV_TP_DST_UNREACHABLE;
+ goto out;
+ }
+
+ orig_node = batadv_orig_hash_find(bat_priv, tp_vars->other_end);
+ if (unlikely(!orig_node)) {
+ err = BATADV_TP_DST_UNREACHABLE;
+ goto out;
+ }
+
+ primary_if = batadv_primary_if_get_selected(bat_priv);
+ if (unlikely(!primary_if)) {
+ err = BATADV_TP_DST_UNREACHABLE;
+ goto out;
+ }
+
+ /* assume that all the hard_interfaces have a correctly
+ * configured MTU, so use the soft_iface MTU as MSS.
+ * This might not be true and in that case the fragmentation
+ * should be used.
+ * Now, try to send the packet as it is
+ */
+ payload_len = BATADV_TP_PLEN;
+ BUILD_BUG_ON(sizeof(struct batadv_icmp_tp_packet) > BATADV_TP_PLEN);
+
+ batadv_tp_reset_sender_timer(tp_vars);
+
+ /* queue the worker in charge of terminating the test */
+ queue_delayed_work(batadv_event_workqueue, &tp_vars->finish_work,
+ msecs_to_jiffies(tp_vars->test_length));
+
+ while (atomic_read(&tp_vars->sending) != 0) {
+ if (unlikely(!batadv_tp_avail(tp_vars, payload_len))) {
+ batadv_tp_wait_available(tp_vars, payload_len);
+ continue;
+ }
+
+ /* to emulate normal unicast traffic, add to the payload len
+ * the size of the unicast header
+ */
+ packet_len = payload_len + sizeof(struct batadv_unicast_packet);
+
+ err = batadv_tp_send_msg(tp_vars, primary_if->net_dev->dev_addr,
+ orig_node, tp_vars->last_sent,
+ packet_len,
+ tp_vars->session,
+ tp_vars->socket_client->index,
+ jiffies_to_msecs(jiffies));
+
+ /* something went wrong during the preparation/transmission */
+ if (unlikely(err && err != BATADV_TP_CANT_SEND)) {
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: batadv_tp_send() cannot send packets (%d)\n",
+ err);
+ /* ensure nobody else tries to stop the thread now */
+ if (atomic_dec_and_test(&tp_vars->sending))
+ tp_vars->reason = err;
+ break;
+ }
+
+ /* right-shift the TWND */
+ if (!err)
+ tp_vars->last_sent += payload_len;
+
+ cond_resched();
+ }
+
+out:
+ if (likely(primary_if))
+ batadv_hardif_put(primary_if);
+ if (likely(orig_node))
+ batadv_orig_node_put(orig_node);
+
+ batadv_tp_sender_end(bat_priv, tp_vars);
+ batadv_tp_sender_cleanup(bat_priv, tp_vars);
+
+ batadv_tp_vars_put(tp_vars);
+
+ do_exit(0);
+}
+
+/**
+ * batadv_tp_start_kthread - start new thread which manages the tp meter sender
+ * @tp_vars: the private data of the current TP meter session
+ */
+static void batadv_tp_start_kthread(struct batadv_tp_vars *tp_vars)
+{
+ struct task_struct *kthread;
+ struct batadv_priv *bat_priv = tp_vars->bat_priv;
+
+ kref_get(&tp_vars->refcount);
+ kthread = kthread_create(batadv_tp_send, tp_vars, "kbatadv_tp_meter");
+ if (IS_ERR(kthread)) {
+ pr_err("batadv: cannot create tp meter kthread\n");
+ batadv_tp_batctl_error_notify(BATADV_TP_MEMORY_ERROR,
+ tp_vars->socket_client->index);
+
+ /* drop reserved reference for kthread */
+ batadv_tp_vars_put(tp_vars);
+
+ /* cleanup of failed tp meter variables */
+ batadv_tp_sender_cleanup(bat_priv, tp_vars);
+ return;
+ }
+
+ wake_up_process(kthread);
+}
+
+/**
+ * batadv_tp_start - start a new tp meter session
+ * @socket_client: layer2 icmp socket client data of tp meter session
+ * @dst: the receiver MAC address
+ * @test_length: test length in milliseconds
+ */
+void batadv_tp_start(struct batadv_socket_client *socket_client, const u8 *dst,
+ u32 test_length)
+{
+ struct batadv_priv *bat_priv = socket_client->bat_priv;
+ struct batadv_tp_vars *tp_vars;
+
+ /* look for an already existing test towards this node */
+ spin_lock_bh(&bat_priv->tp_list_lock);
+ tp_vars = batadv_tp_list_find(bat_priv, dst);
+ if (tp_vars) {
+ spin_unlock_bh(&bat_priv->tp_list_lock);
+ batadv_tp_vars_put(tp_vars);
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: test to or from the same node already ongoing, aborting\n");
+ batadv_tp_batctl_error_notify(BATADV_TP_ALREADY_ONGOING,
+ socket_client->index);
+ return;
+ }
+
+ if (!atomic_add_unless(&bat_priv->tp_num, 1, BATADV_TP_MAX_NUM)) {
+ spin_unlock_bh(&bat_priv->tp_list_lock);
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: too many ongoing sessions, aborting (SEND)\n");
+ batadv_tp_batctl_error_notify(BATADV_TP_TOO_MANY,
+ socket_client->index);
+ return;
+ }
+
+ tp_vars = kmalloc(sizeof(*tp_vars), GFP_ATOMIC);
+ if (!tp_vars) {
+ spin_unlock_bh(&bat_priv->tp_list_lock);
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: batadv_tp_start cannot allocate list elements\n");
+ batadv_tp_batctl_error_notify(BATADV_TP_MEMORY_ERROR,
+ socket_client->index);
+ return;
+ }
+
+ /* initialize tp_vars */
+ ether_addr_copy(tp_vars->other_end, dst);
+ kref_init(&tp_vars->refcount);
+ tp_vars->role = BATADV_TP_SENDER;
+ atomic_set(&tp_vars->sending, 1);
+ get_random_bytes(tp_vars->session, sizeof(tp_vars->session));
+
+ tp_vars->last_sent = BATADV_TP_FIRST_SEQ;
+ atomic_set(&tp_vars->last_acked, BATADV_TP_FIRST_SEQ);
+ tp_vars->fast_recovery = false;
+ tp_vars->recover = BATADV_TP_FIRST_SEQ;
+
+ /* initialise the CWND to 3*MSS (Section 3.1 in RFC5681).
+ * For batman-adv the MSS is the size of the payload received by the
+ * soft_interface, hence its MTU
+ */
+ tp_vars->cwnd = BATADV_TP_PLEN * 3;
+ /* at the beginning initialise the SS threshold to the biggest possible
+ * window size, hence the AWND size
+ */
+ tp_vars->ss_threshold = BATADV_TP_AWND;
+
+ /* RTO initial value is 3 seconds.
+ * Details in Section 2.1 of RFC6298
+ */
+ tp_vars->rto = 1000;
+ tp_vars->srtt = 0;
+ tp_vars->rttvar = 0;
+
+ atomic_set(&tp_vars->tot_sent, 0);
+
+ kref_get(&tp_vars->refcount);
+ setup_timer(&tp_vars->timer, batadv_tp_sender_timeout,
+ (unsigned long)tp_vars);
+
+ tp_vars->bat_priv = bat_priv;
+ tp_vars->socket_client = socket_client;
+ tp_vars->start_time = jiffies;
+
+ init_waitqueue_head(&tp_vars->more_bytes);
+
+ spin_lock_init(&tp_vars->unacked_lock);
+ INIT_LIST_HEAD(&tp_vars->unacked_list);
+
+ spin_lock_init(&tp_vars->cwnd_lock);
+
+ tp_vars->prerandom_offset = 0;
+ spin_lock_init(&tp_vars->prerandom_lock);
+
+ kref_get(&tp_vars->refcount);
+ hlist_add_head_rcu(&tp_vars->list, &bat_priv->tp_list);
+ spin_unlock_bh(&bat_priv->tp_list_lock);
+
+ tp_vars->test_length = test_length;
+ if (!tp_vars->test_length)
+ tp_vars->test_length = BATADV_TP_DEF_TEST_LENGTH;
+
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: starting throughput meter towards %pM (length=%ums)\n",
+ dst, test_length);
+
+ /* init work item for finished tp tests */
+ INIT_DELAYED_WORK(&tp_vars->finish_work, batadv_tp_sender_finish);
+
+ /* start tp kthread. This way the write() call issued from userspace can
+ * happily return and avoid to block
+ */
+ batadv_tp_start_kthread(tp_vars);
+
+ /* don't return reference to new tp_vars */
+ batadv_tp_vars_put(tp_vars);
+}
+
+/**
+ * batadv_tp_stop - stop currently running tp meter session
+ * @bat_priv: the bat priv with all the soft interface information
+ * @dst: the receiver MAC address
+ * @return_value: reason for tp meter session stop
+ */
+void batadv_tp_stop(struct batadv_priv *bat_priv, const u8 *dst,
+ u8 return_value)
+{
+ struct batadv_orig_node *orig_node;
+ struct batadv_tp_vars *tp_vars;
+
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: stopping test towards %pM\n", dst);
+
+ orig_node = batadv_orig_hash_find(bat_priv, dst);
+ if (!orig_node)
+ return;
+
+ tp_vars = batadv_tp_list_find(bat_priv, orig_node->orig);
+ if (!tp_vars) {
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: trying to interrupt an already over connection\n");
+ goto out;
+ }
+
+ batadv_tp_sender_shutdown(tp_vars, return_value);
+ batadv_tp_vars_put(tp_vars);
+out:
+ batadv_orig_node_put(orig_node);
+}
+
+/**
+ * batadv_tp_reset_receiver_timer - reset the receiver shutdown timer
+ * @tp_vars: the private data of the current TP meter session
+ *
+ * start the receiver shutdown timer or reset it if already started
+ */
+static void batadv_tp_reset_receiver_timer(struct batadv_tp_vars *tp_vars)
+{
+ mod_timer(&tp_vars->timer,
+ jiffies + msecs_to_jiffies(BATADV_TP_RECV_TIMEOUT));
+}
+
+/**
+ * batadv_tp_receiver_shutdown - stop a tp meter receiver when timeout is
+ * reached without received ack
+ * @arg: address of the related tp_vars
+ */
+static void batadv_tp_receiver_shutdown(unsigned long arg)
+{
+ struct batadv_tp_vars *tp_vars = (struct batadv_tp_vars *)arg;
+ struct batadv_tp_unacked *un, *safe;
+ struct batadv_priv *bat_priv;
+
+ bat_priv = tp_vars->bat_priv;
+
+ /* if there is recent activity rearm the timer */
+ if (!batadv_has_timed_out(tp_vars->last_recv_time,
+ BATADV_TP_RECV_TIMEOUT)) {
+ /* reset the receiver shutdown timer */
+ batadv_tp_reset_receiver_timer(tp_vars);
+ return;
+ }
+
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Shutting down for inactivity (more than %dms) from %pM\n",
+ BATADV_TP_RECV_TIMEOUT, tp_vars->other_end);
+
+ spin_lock_bh(&tp_vars->bat_priv->tp_list_lock);
+ hlist_del_rcu(&tp_vars->list);
+ spin_unlock_bh(&tp_vars->bat_priv->tp_list_lock);
+
+ /* drop list reference */
+ batadv_tp_vars_put(tp_vars);
+
+ atomic_dec(&bat_priv->tp_num);
+
+ spin_lock_bh(&tp_vars->unacked_lock);
+ list_for_each_entry_safe(un, safe, &tp_vars->unacked_list, list) {
+ list_del(&un->list);
+ kfree(un);
+ }
+ spin_unlock_bh(&tp_vars->unacked_lock);
+
+ /* drop reference of timer */
+ batadv_tp_vars_put(tp_vars);
+}
+
+/**
+ * batadv_tp_send_ack - send an ACK packet
+ * @bat_priv: the bat priv with all the soft interface information
+ * @dst: the mac address of the destination originator
+ * @seq: the sequence number to ACK
+ * @timestamp: the timestamp to echo back in the ACK
+ * @session: session identifier
+ * @socket_index: local ICMP socket identifier
+ *
+ * Return: 0 on success, a positive integer representing the reason of the
+ * failure otherwise
+ */
+static int batadv_tp_send_ack(struct batadv_priv *bat_priv, const u8 *dst,
+ u32 seq, __be32 timestamp, const u8 *session,
+ int socket_index)
+{
+ struct batadv_hard_iface *primary_if = NULL;
+ struct batadv_orig_node *orig_node;
+ struct batadv_icmp_tp_packet *icmp;
+ struct sk_buff *skb;
+ int r, ret;
+
+ orig_node = batadv_orig_hash_find(bat_priv, dst);
+ if (unlikely(!orig_node)) {
+ ret = BATADV_TP_DST_UNREACHABLE;
+ goto out;
+ }
+
+ primary_if = batadv_primary_if_get_selected(bat_priv);
+ if (unlikely(!primary_if)) {
+ ret = BATADV_TP_DST_UNREACHABLE;
+ goto out;
+ }
+
+ skb = netdev_alloc_skb_ip_align(NULL, sizeof(*icmp) + ETH_HLEN);
+ if (unlikely(!skb)) {
+ ret = BATADV_TP_MEMORY_ERROR;
+ goto out;
+ }
+
+ skb_reserve(skb, ETH_HLEN);
+ icmp = (struct batadv_icmp_tp_packet *)skb_put(skb, sizeof(*icmp));
+ icmp->packet_type = BATADV_ICMP;
+ icmp->version = BATADV_COMPAT_VERSION;
+ icmp->ttl = BATADV_TTL;
+ icmp->msg_type = BATADV_TP;
+ ether_addr_copy(icmp->dst, orig_node->orig);
+ ether_addr_copy(icmp->orig, primary_if->net_dev->dev_addr);
+ icmp->uid = socket_index;
+
+ icmp->subtype = BATADV_TP_ACK;
+ memcpy(icmp->session, session, sizeof(icmp->session));
+ icmp->seqno = htonl(seq);
+ icmp->timestamp = timestamp;
+
+ /* send the ack */
+ r = batadv_send_skb_to_orig(skb, orig_node, NULL);
+ if (unlikely(r < 0) || (r == NET_XMIT_DROP)) {
+ ret = BATADV_TP_DST_UNREACHABLE;
+ goto out;
+ }
+ ret = 0;
+
+out:
+ if (likely(orig_node))
+ batadv_orig_node_put(orig_node);
+ if (likely(primary_if))
+ batadv_hardif_put(primary_if);
+
+ return ret;
+}
+
+/**
+ * batadv_tp_handle_out_of_order - store an out of order packet
+ * @tp_vars: the private data of the current TP meter session
+ * @skb: the buffer containing the received packet
+ *
+ * Store the out of order packet in the unacked list for late processing. This
+ * packets are kept in this list so that they can be ACKed at once as soon as
+ * all the previous packets have been received
+ *
+ * Return: true if the packed has been successfully processed, false otherwise
+ */
+static bool batadv_tp_handle_out_of_order(struct batadv_tp_vars *tp_vars,
+ const struct sk_buff *skb)
+{
+ const struct batadv_icmp_tp_packet *icmp;
+ struct batadv_tp_unacked *un, *new;
+ u32 payload_len;
+ bool added = false;
+
+ new = kmalloc(sizeof(*new), GFP_ATOMIC);
+ if (unlikely(!new))
+ return false;
+
+ icmp = (struct batadv_icmp_tp_packet *)skb->data;
+
+ new->seqno = ntohl(icmp->seqno);
+ payload_len = skb->len - sizeof(struct batadv_unicast_packet);
+ new->len = payload_len;
+
+ spin_lock_bh(&tp_vars->unacked_lock);
+ /* if the list is empty immediately attach this new object */
+ if (list_empty(&tp_vars->unacked_list)) {
+ list_add(&new->list, &tp_vars->unacked_list);
+ goto out;
+ }
+
+ /* otherwise loop over the list and either drop the packet because this
+ * is a duplicate or store it at the right position.
+ *
+ * The iteration is done in the reverse way because it is likely that
+ * the last received packet (the one being processed now) has a bigger
+ * seqno than all the others already stored.
+ */
+ list_for_each_entry_reverse(un, &tp_vars->unacked_list, list) {
+ /* check for duplicates */
+ if (new->seqno == un->seqno) {
+ if (new->len > un->len)
+ un->len = new->len;
+ kfree(new);
+ added = true;
+ break;
+ }
+
+ /* look for the right position */
+ if (batadv_seq_before(new->seqno, un->seqno))
+ continue;
+
+ /* as soon as an entry having a bigger seqno is found, the new
+ * one is attached _after_ it. In this way the list is kept in
+ * ascending order
+ */
+ list_add_tail(&new->list, &un->list);
+ added = true;
+ break;
+ }
+
+ /* received packet with smallest seqno out of order; add it to front */
+ if (!added)
+ list_add(&new->list, &tp_vars->unacked_list);
+
+out:
+ spin_unlock_bh(&tp_vars->unacked_lock);
+
+ return true;
+}
+
+/**
+ * batadv_tp_ack_unordered - update number received bytes in current stream
+ * without gaps
+ * @tp_vars: the private data of the current TP meter session
+ */
+static void batadv_tp_ack_unordered(struct batadv_tp_vars *tp_vars)
+{
+ struct batadv_tp_unacked *un, *safe;
+ u32 to_ack;
+
+ /* go through the unacked packet list and possibly ACK them as
+ * well
+ */
+ spin_lock_bh(&tp_vars->unacked_lock);
+ list_for_each_entry_safe(un, safe, &tp_vars->unacked_list, list) {
+ /* the list is ordered, therefore it is possible to stop as soon
+ * there is a gap between the last acked seqno and the seqno of
+ * the packet under inspection
+ */
+ if (batadv_seq_before(tp_vars->last_recv, un->seqno))
+ break;
+
+ to_ack = un->seqno + un->len - tp_vars->last_recv;
+
+ if (batadv_seq_before(tp_vars->last_recv, un->seqno + un->len))
+ tp_vars->last_recv += to_ack;
+
+ list_del(&un->list);
+ kfree(un);
+ }
+ spin_unlock_bh(&tp_vars->unacked_lock);
+}
+
+/**
+ * batadv_tp_init_recv - return matching or create new receiver tp_vars
+ * @bat_priv: the bat priv with all the soft interface information
+ * @icmp: received icmp tp msg
+ *
+ * Return: corresponding tp_vars or NULL on errors
+ */
+static struct batadv_tp_vars *
+batadv_tp_init_recv(struct batadv_priv *bat_priv,
+ const struct batadv_icmp_tp_packet *icmp)
+{
+ struct batadv_tp_vars *tp_vars;
+
+ spin_lock_bh(&bat_priv->tp_list_lock);
+ tp_vars = batadv_tp_list_find_session(bat_priv, icmp->orig,
+ icmp->session);
+ if (tp_vars)
+ goto out_unlock;
+
+ if (!atomic_add_unless(&bat_priv->tp_num, 1, BATADV_TP_MAX_NUM)) {
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: too many ongoing sessions, aborting (RECV)\n");
+ goto out_unlock;
+ }
+
+ tp_vars = kmalloc(sizeof(*tp_vars), GFP_ATOMIC);
+ if (!tp_vars)
+ goto out_unlock;
+
+ ether_addr_copy(tp_vars->other_end, icmp->orig);
+ tp_vars->role = BATADV_TP_RECEIVER;
+ memcpy(tp_vars->session, icmp->session, sizeof(tp_vars->session));
+ tp_vars->last_recv = BATADV_TP_FIRST_SEQ;
+ tp_vars->bat_priv = bat_priv;
+ kref_init(&tp_vars->refcount);
+
+ spin_lock_init(&tp_vars->unacked_lock);
+ INIT_LIST_HEAD(&tp_vars->unacked_list);
+
+ kref_get(&tp_vars->refcount);
+ hlist_add_head_rcu(&tp_vars->list, &bat_priv->tp_list);
+
+ kref_get(&tp_vars->refcount);
+ setup_timer(&tp_vars->timer, batadv_tp_receiver_shutdown,
+ (unsigned long)tp_vars);
+
+ batadv_tp_reset_receiver_timer(tp_vars);
+
+out_unlock:
+ spin_unlock_bh(&bat_priv->tp_list_lock);
+
+ return tp_vars;
+}
+
+/**
+ * batadv_tp_recv_msg - process a single data message
+ * @bat_priv: the bat priv with all the soft interface information
+ * @skb: the buffer containing the received packet
+ *
+ * Process a received TP MSG packet
+ */
+static void batadv_tp_recv_msg(struct batadv_priv *bat_priv,
+ const struct sk_buff *skb)
+{
+ const struct batadv_icmp_tp_packet *icmp;
+ struct batadv_tp_vars *tp_vars;
+ size_t packet_size;
+ u32 seqno;
+
+ icmp = (struct batadv_icmp_tp_packet *)skb->data;
+
+ seqno = ntohl(icmp->seqno);
+ /* check if this is the first seqno. This means that if the
+ * first packet is lost, the tp meter does not work anymore!
+ */
+ if (seqno == BATADV_TP_FIRST_SEQ) {
+ tp_vars = batadv_tp_init_recv(bat_priv, icmp);
+ if (!tp_vars) {
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: seqno != BATADV_TP_FIRST_SEQ cannot initiate connection\n");
+ goto out;
+ }
+ } else {
+ tp_vars = batadv_tp_list_find_session(bat_priv, icmp->orig,
+ icmp->session);
+ if (!tp_vars) {
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Unexpected packet from %pM!\n",
+ icmp->orig);
+ goto out;
+ }
+ }
+
+ if (unlikely(tp_vars->role != BATADV_TP_RECEIVER)) {
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Meter: dropping packet: not expected (role=%u)\n",
+ tp_vars->role);
+ goto out;
+ }
+
+ tp_vars->last_recv_time = jiffies;
+
+ /* if the packet is a duplicate, it may be the case that an ACK has been
+ * lost. Resend the ACK
+ */
+ if (batadv_seq_before(seqno, tp_vars->last_recv))
+ goto send_ack;
+
+ /* if the packet is out of order enqueue it */
+ if (ntohl(icmp->seqno) != tp_vars->last_recv) {
+ /* exit immediately (and do not send any ACK) if the packet has
+ * not been enqueued correctly
+ */
+ if (!batadv_tp_handle_out_of_order(tp_vars, skb))
+ goto out;
+
+ /* send a duplicate ACK */
+ goto send_ack;
+ }
+
+ /* if everything was fine count the ACKed bytes */
+ packet_size = skb->len - sizeof(struct batadv_unicast_packet);
+ tp_vars->last_recv += packet_size;
+
+ /* check if this ordered message filled a gap.... */
+ batadv_tp_ack_unordered(tp_vars);
+
+send_ack:
+ /* send the ACK. If the received packet was out of order, the ACK that
+ * is going to be sent is a duplicate (the sender will count them and
+ * possibly enter Fast Retransmit as soon as it has reached 3)
+ */
+ batadv_tp_send_ack(bat_priv, icmp->orig, tp_vars->last_recv,
+ icmp->timestamp, icmp->session, icmp->uid);
+out:
+ if (likely(tp_vars))
+ batadv_tp_vars_put(tp_vars);
+}
+
+/**
+ * batadv_tp_meter_recv - main TP Meter receiving function
+ * @bat_priv: the bat priv with all the soft interface information
+ * @skb: the buffer containing the received packet
+ */
+void batadv_tp_meter_recv(struct batadv_priv *bat_priv, struct sk_buff *skb)
+{
+ struct batadv_icmp_tp_packet *icmp;
+
+ icmp = (struct batadv_icmp_tp_packet *)skb->data;
+
+ switch (icmp->subtype) {
+ case BATADV_TP_MSG:
+ batadv_tp_recv_msg(bat_priv, skb);
+ break;
+ case BATADV_TP_ACK:
+ batadv_tp_recv_ack(bat_priv, skb);
+ break;
+ default:
+ batadv_dbg(BATADV_DBG_TP_METER, bat_priv,
+ "Received unknown TP Metric packet type %u\n",
+ icmp->subtype);
+ }
+ consume_skb(skb);
+}
+
+/**
+ * batadv_tp_meter_init - initialize global tp_meter structures
+ */
+void batadv_tp_meter_init(void)
+{
+ get_random_bytes(batadv_tp_prerandom, sizeof(batadv_tp_prerandom));
+}
diff --git a/net/batman-adv/tp_meter.h b/net/batman-adv/tp_meter.h
new file mode 100644
index 0000000..5e8b326
--- /dev/null
+++ b/net/batman-adv/tp_meter.h
@@ -0,0 +1,34 @@
+/* Copyright (C) 2012-2016 B.A.T.M.A.N. contributors:
+ *
+ * Edo Monticelli, Antonio Quartulli
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _NET_BATMAN_ADV_TP_METER_H_
+#define _NET_BATMAN_ADV_TP_METER_H_
+
+#include "main.h"
+
+struct sk_buff;
+
+#include <linux/types.h>
+
+void batadv_tp_meter_init(void);
+void batadv_tp_start(struct batadv_socket_client *socket_client, const u8 *dst,
+ u32 test_length);
+void batadv_tp_stop(struct batadv_priv *bat_priv, const u8 *dst,
+ u8 return_value);
+void batadv_tp_meter_recv(struct batadv_priv *bat_priv, struct sk_buff *skb);
+
+#endif /* _NET_BATMAN_ADV_TP_METER_H_ */
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 271ded7..4497f54 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -804,6 +804,111 @@ struct batadv_priv_nc {
};
/**
+ * struct batadv_tp_unacked - unacked packet meta-information
+ * @seqno: seqno of the unacked packet
+ * @len: length of the packet
+ * @list: list node for batadv_tp_vars::unacked_list
+ *
+ * This struct is supposed to represent a buffer unacked packet. However, since
+ * the purpose of the TP meter is to count the traffic only, there is no need to
+ * store the entire sk_buff, the starting offset and the length are enough
+ */
+struct batadv_tp_unacked {
+ u32 seqno;
+ u16 len;
+ struct list_head list;
+};
+
+/**
+ * enum batadv_tp_meter_role - Modus in tp meter session
+ * @BATADV_TP_RECEIVER: Initialized as receiver
+ * @BATADV_TP_SENDER: Initialized as sender
+ */
+enum batadv_tp_meter_role {
+ BATADV_TP_RECEIVER,
+ BATADV_TP_SENDER
+};
+
+/**
+ * struct batadv_tp_vars - tp meter private variables per session
+ * @list: list node for bat_priv::tp_list
+ * @timer: timer for ack (receiver) and retry (sender)
+ * @bat_priv: pointer to the mesh object
+ * @socket_client: layer2 icmp socket client data of tp meter session
+ * @start_time: start time in jiffies
+ * @other_end: mac address of remote
+ * @role: receiver/sender modi
+ * @sending: sending binary semaphore: 1 if sending, 0 is not
+ * @reason: reason for a stopped session
+ * @finish_work: work item for the finishing procedure
+ * @test_length: test length in milliseconds
+ * @session: TP session identifier
+ * @dec_cwnd: decimal part of the cwnd used during linear growth
+ * @cwnd: current size of the congestion window
+ * @cwnd_lock: lock do protect @cwnd & @dec_cwnd
+ * @ss_threshold: Slow Start threshold. Once cwnd exceeds this value the
+ * connection switches to the Congestion Avoidance state
+ * @last_acked: last acked byte
+ * @last_sent: last sent byte, not yet acked
+ * @tot_sent: amount of data sent/ACKed so far
+ * @dup_acks: duplicate ACKs counter
+ * @fast_recovery: true if in Fast Recovery mode
+ * @recover: last sent seqno when entering Fast Recovery
+ * @rto: sender timeout
+ * @srtt: smoothed RTT scaled by 2^3
+ * @rttvar: RTT variation scaled by 2^2
+ * @more_bytes: waiting queue anchor when waiting for more ack/retry timeout
+ * @prerandom_offset: offset inside the prerandom buffer
+ * @prerandom_lock: spinlock protecting access to prerandom_offset
+ * @last_recv: last in-order received packet
+ * @unacked_list: list of unacked packets (meta-info only)
+ * @unacked_lock: protect unacked_list
+ * @last_recv_time: time time (jiffies) a msg was received
+ * @refcount: number of context where the object is used
+ * @rcu: struct used for freeing in an RCU-safe manner
+ */
+struct batadv_tp_vars {
+ struct hlist_node list;
+ struct timer_list timer;
+ struct batadv_priv *bat_priv;
+ struct batadv_socket_client *socket_client;
+ unsigned long start_time;
+ u8 other_end[ETH_ALEN];
+ enum batadv_tp_meter_role role;
+ atomic_t sending;
+ enum batadv_tp_meter_reason reason;
+ struct delayed_work finish_work;
+ u32 test_length;
+ u8 session[2];
+
+ /* sender variables */
+ u16 dec_cwnd;
+ u32 cwnd;
+ spinlock_t cwnd_lock; /* Protects cwnd & dec_cwnd */
+ u32 ss_threshold;
+ atomic_t last_acked;
+ u32 last_sent;
+ atomic_t tot_sent;
+ atomic_t dup_acks;
+ bool fast_recovery;
+ u32 recover;
+ u32 rto;
+ u32 srtt;
+ u32 rttvar;
+ wait_queue_head_t more_bytes;
+ u32 prerandom_offset;
+ spinlock_t prerandom_lock; /* Protects prerandom_offset */
+
+ /* receiver variables */
+ u32 last_recv;
+ struct list_head unacked_list;
+ spinlock_t unacked_lock; /* Protects unacked_list */
+ unsigned long last_recv_time;
+ struct kref refcount;
+ struct rcu_head rcu;
+};
+
+/**
* struct batadv_softif_vlan - per VLAN attributes set
* @bat_priv: pointer to the mesh object
* @vid: VLAN identifier
@@ -873,9 +978,12 @@ struct batadv_priv_bat_v {
* @debug_dir: dentry for debugfs batman-adv subdirectory
* @forw_bat_list: list of aggregated OGMs that will be forwarded
* @forw_bcast_list: list of broadcast packets that will be rebroadcasted
+ * @tp_list: list of tp sessions
+ * @tp_num: number of currently active tp sessions
* @orig_hash: hash table containing mesh participants (orig nodes)
* @forw_bat_list_lock: lock protecting forw_bat_list
* @forw_bcast_list_lock: lock protecting forw_bcast_list
+ * @tp_list_lock: spinlock protecting @tp_list
* @orig_work: work queue callback item for orig node purging
* @cleanup_work: work queue callback item for soft-interface deinit
* @primary_if: one of the hard-interfaces assigned to this mesh interface
@@ -931,9 +1039,12 @@ struct batadv_priv {
struct dentry *debug_dir;
struct hlist_head forw_bat_list;
struct hlist_head forw_bcast_list;
+ struct hlist_head tp_list;
struct batadv_hashtable *orig_hash;
spinlock_t forw_bat_list_lock; /* protects forw_bat_list */
spinlock_t forw_bcast_list_lock; /* protects forw_bcast_list */
+ spinlock_t tp_list_lock; /* protects tp_list */
+ atomic_t tp_num;
struct delayed_work orig_work;
struct work_struct cleanup_work;
struct batadv_hard_iface __rcu *primary_if; /* rcu protected pointer */
--
2.7.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [B.A.T.M.A.N.] [RFC 5/5] batctl: introduce throughput meter support
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 1/5] batman-adv: return netdev status in the TX path Sven Eckelmann
` (2 preceding siblings ...)
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 4/5] batman-adv: throughput meter implementation Sven Eckelmann
@ 2016-02-18 17:26 ` Sven Eckelmann
3 siblings, 0 replies; 7+ messages in thread
From: Sven Eckelmann @ 2016-02-18 17:26 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Edo Monticelli, Antonio Quartulli, Sven Eckelmann
From: Antonio Quartulli <antonio.quartulli@open-mesh.com>
Add command to launch the throughput meter test. The throughput meter is a
batman kernelspace tool for throughput measurements. The syntax is:
batctl tp <MAC>
The test is interruptible with SIGINT or SIGTERM; if the test succeeds with
no error the throughput and the elapsed time are printed to stdout,
otherwise occurred an error message is displayed (on stdout) accordingly.
Based on a prototype from Edo Monticelli <montik@autistici.org>
Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
---
Makefile | 2 +-
main.c | 6 ++
man/batctl.8 | 24 ++++++-
packet.h | 120 +++++++++++++++++++++++++++++++
tcpdump.c | 14 +++-
tp_meter.c | 227 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
tp_meter.h | 22 ++++++
7 files changed, 411 insertions(+), 4 deletions(-)
create mode 100644 tp_meter.c
create mode 100644 tp_meter.h
diff --git a/Makefile b/Makefile
index b82c0c6..7cfe851 100755
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@ export CONFIG_BATCTL_BISECT=n
# batctl build
BINARY_NAME = batctl
-OBJ = main.o bat-hosts.o functions.o sys.o debug.o ping.o traceroute.o tcpdump.o hash.o debugfs.o ioctl.o list-batman.o translate.o
+OBJ = main.o bat-hosts.o functions.o sys.o debug.o ping.o traceroute.o tcpdump.o hash.o debugfs.o ioctl.o list-batman.o translate.o tp_meter.o
OBJ_BISECT = bisect_iv.o
MANPAGE = man/batctl.8
diff --git a/main.c b/main.c
index a2cda5b..5e1ecc7 100644
--- a/main.c
+++ b/main.c
@@ -33,6 +33,7 @@
#include "translate.h"
#include "traceroute.h"
#include "tcpdump.h"
+#include "tp_meter.h"
#include "bisect_iv.h"
#include "ioctl.h"
#include "functions.h"
@@ -82,6 +83,7 @@ static void print_usage(void)
fprintf(stderr, " \tping|p <destination> \tping another batman adv host via layer 2\n");
fprintf(stderr, " \ttraceroute|tr <destination> \ttraceroute another batman adv host via layer 2\n");
fprintf(stderr, " \ttcpdump|td <interface> \ttcpdump layer 2 traffic on the given interface\n");
+ printf(" \tthroughputmeter|tp <destination> \tstart a throughput measurement\n");
fprintf(stderr, " \ttranslate|t <destination> \ttranslate a destination to the originator responsible for it\n");
#ifdef BATCTL_BISECT
fprintf(stderr, " \tbisect_iv <file1> .. <fileN>\tanalyze given batman iv log files for routing stability\n");
@@ -162,6 +164,10 @@ int main(int argc, char **argv)
ret = ping(mesh_iface, argc - 1, argv + 1);
+ } else if ((strcmp(argv[1], "throughputmeter") == 0) || (strcmp(argv[1], "tp") == 0)) {
+
+ ret = tp_meter (mesh_iface, argc -1, argv + 1);
+
} else if ((strcmp(argv[1], "traceroute") == 0) || (strcmp(argv[1], "tr") == 0)) {
ret = traceroute(mesh_iface, argc - 1, argv + 1);
diff --git a/man/batctl.8 b/man/batctl.8
index e804a08..69a2537 100644
--- a/man/batctl.8
+++ b/man/batctl.8
@@ -36,9 +36,11 @@ B.A.T.M.A.N. advanced operates on layer 2. Thus all hosts participating in the v
connected together for all protocols above layer 2. Therefore the common diagnosis tools do not work as expected. To
overcome these problems batctl contains the commands \fBping\fP, \fBtraceroute\fP, \fBtcpdump\fP which provide similar
functionality to the normal \fBping\fP(1), \fBtraceroute\fP(1), \fBtcpdump\fP(1) commands, but modified to layer 2
-behaviour or using the B.A.T.M.A.N. advanced protocol.
-.PP
+behaviour or using the B.A.T.M.A.N. advanced protocol. For similar reasons, \fBthroughputmeter\fP, a command to test network
+performances, is also included.
+
.PP
+.Pp
.SH OPTIONS
.TP
.I \fBoptions:
@@ -319,6 +321,24 @@ for routing loops. Use "\-t" to trace OGMs of a host throughout the network. Use
nodes. The option "\-s" can be used to limit the output to a range of sequence numbers, between min and max, or to one
specific sequence number, min. Furthermore using "\-o" you can filter the output to a specified originator. If "\-n" is
given batctl will not replace the MAC addresses with bat\-host names in the output.
+.RE
+.br
+.IP "\fBthroughputmeter\fP|\fBtp\fP \fBMAC\fP"
+This command starts a throughput test entirely controlled by batman module in
+kernel space: the computational resources needed to align memory and copy data
+between user and kernel space that are required by other user space tools may
+represent a bootleneck on some low profile device.
+
+The test consist of the transfer of 14 MB of data between the two nodes. The
+protocol used to transfer the data is somehow similar to TCP, but simpler: some
+TCP features are still missing, thus protocol performances could be worst. Since
+a fixed amount of data is transferred the experiment duration depends on the
+network conditions. The experiment can be interrupted with CTRL + C. At the end
+of a succesful experiment the throughput in KBytes per second is returned,
+togheter with the experiment duration in millisecond and the amount of bytes
+transferred. If too many packets are lost or the specified MAC address is not
+reachable, a message notifing the error is returned instead of the result.
+.RE
.br
.SH FILES
.TP
diff --git a/packet.h b/packet.h
index 8a8d7ca..932eacb 100644
--- a/packet.h
+++ b/packet.h
@@ -21,6 +21,8 @@
#include <asm/byteorder.h>
#include <linux/types.h>
+#define batadv_tp_is_error(n) ((u8)n > 127 ? 1 : 0)
+
/**
* enum batadv_packettype - types for batman-adv encapsulated packets
* @BATADV_IV_OGM: originator messages for B.A.T.M.A.N. IV
@@ -93,6 +95,7 @@ enum batadv_icmp_packettype {
BATADV_ECHO_REQUEST = 8,
BATADV_TTL_EXCEEDED = 11,
BATADV_PARAMETER_PROBLEM = 12,
+ BATADV_TP = 15,
};
/**
@@ -284,6 +287,31 @@ struct batadv_elp_packet {
#define BATADV_ELP_HLEN sizeof(struct batadv_elp_packet)
/**
+ * struct batadv_icmp_user_packet - used to start an ICMP operation from
+ * userspace
+ * @dst: destination node
+ * @version: compat version used by userspace
+ * @cmd_type: the command to start
+ * @arg1: possible argument for the command
+ */
+struct batadv_icmp_user_packet {
+ u8 dst[ETH_ALEN];
+ u8 version;
+ u8 cmd_type;
+ u32 arg1;
+};
+
+/**
+ * enum batadv_icmp_user_cmd_type - types for batman-adv icmp cmd modes
+ * @BATADV_TP_START: start a throughput meter run
+ * @BATADV_TP_STOP: stop a throughput meter run
+ */
+enum batadv_icmp_user_cmd_type {
+ BATADV_TP_START = 0,
+ BATADV_TP_STOP = 2,
+};
+
+/**
* struct batadv_icmp_header - common members among all the ICMP packets
* @packet_type: batman-adv packet type, part of the general header
* @version: batman-adv protocol version, part of the genereal header
@@ -333,6 +361,98 @@ struct batadv_icmp_packet {
__be16 seqno;
};
+/**
+ * struct batadv_icmp_tp_packet - ICMP TP Meter packet
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the genereal header
+ * @ttl: time to live for this packet, part of the genereal header
+ * @msg_type: ICMP packet type
+ * @dst: address of the destination node
+ * @orig: address of the source node
+ * @uid: local ICMP socket identifier
+ * @subtype: TP packet subtype (see batadv_icmp_tp_subtype)
+ * @session: TP session identifier
+ * @seqno: the TP sequence number
+ * @timestamp: time when the packet has been sent. This value is filled in a
+ * TP_MSG and echoed back in the next TP_ACK so that the sender can compute the
+ * RTT. Since it is read only by the host which wrote it, there is no need to
+ * store it using network order
+ */
+struct batadv_icmp_tp_packet {
+ u8 packet_type;
+ u8 version;
+ u8 ttl;
+ u8 msg_type; /* see ICMP message types above */
+ u8 dst[ETH_ALEN];
+ u8 orig[ETH_ALEN];
+ u8 uid;
+ u8 subtype;
+ u8 session[2];
+ __be32 seqno;
+ __be32 timestamp;
+};
+
+/**
+ * enum batadv_icmp_tp_subtype - ICMP TP Meter packet subtypes
+ * @BATADV_TP_MSG: Msg from sender to receiver
+ * @BATADV_TP_ACK: acknowledgment from receiver to sender
+ */
+enum batadv_icmp_tp_subtype {
+ BATADV_TP_MSG = 0,
+ BATADV_TP_ACK,
+};
+
+/**
+ * struct batadv_icmp_tp_result_packet - tp response returned to batctl
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the genereal header
+ * @ttl: time to live for this packet, part of the genereal header
+ * @msg_type: ICMP packet type
+ * @dst: address of the destination node
+ * @orig: address of the source node
+ * @uid: local ICMP socket identifier
+ * @reserved: not used - useful for alignment
+ * @return_value: result of run (see batadv_tp_meter_status)
+ * @test_time: time (msec) the run took
+ * @total_bytes: amount of acked bytes during run
+ */
+struct batadv_icmp_tp_result_packet {
+ u8 packet_type;
+ u8 version;
+ u8 ttl;
+ u8 msg_type; /* see ICMP message types above */
+ u8 dst[ETH_ALEN];
+ u8 orig[ETH_ALEN];
+ u8 uid;
+ u8 reserved[2];
+ u8 return_value;
+ u32 test_time;
+ u32 total_bytes;
+};
+
+/**
+ * enum batadv_tp_meter_reason - reason of a a tp meter test run stop
+ * @BATADV_TP_COMPLETE: sender finished tp run
+ * @BATADV_TP_SIGINT: sender was stopped during run
+ * @BATADV_TP_DST_UNREACHABLE: receiver could not be reached or didn't answer
+ * @BATADV_TP_RESEND_LIMIT: (unused) sender retry reached limit
+ * @BATADV_TP_ALREADY_ONGOING: test to or from the same node already ongoing
+ * @BATADV_TP_MEMORY_ERROR: test was stopped due to low memory
+ * @BATADV_TP_CANT_SEND: failed to send via outgoing interface
+ * @BATADV_TP_TOO_MANY: too many ongoing sessions
+ */
+enum batadv_tp_meter_reason {
+ BATADV_TP_COMPLETE = 3,
+ BATADV_TP_SIGINT = 4,
+ /* error status >= 128 */
+ BATADV_TP_DST_UNREACHABLE = 128,
+ BATADV_TP_RESEND_LIMIT = 129,
+ BATADV_TP_ALREADY_ONGOING = 130,
+ BATADV_TP_MEMORY_ERROR = 131,
+ BATADV_TP_CANT_SEND = 132,
+ BATADV_TP_TOO_MANY = 133,
+};
+
#define BATADV_RR_LEN 16
/**
diff --git a/tcpdump.c b/tcpdump.c
index db28414..ac03cb2 100644
--- a/tcpdump.c
+++ b/tcpdump.c
@@ -741,11 +741,14 @@ static void dump_batman_iv_ogm(unsigned char *packet_buff, ssize_t buff_len, int
static void dump_batman_icmp(unsigned char *packet_buff, ssize_t buff_len, int read_opt, int time_printed)
{
struct batadv_icmp_packet *icmp_packet;
+ struct batadv_icmp_tp_packet *tp;
+
char *name;
LEN_CHECK((size_t)buff_len - sizeof(struct ether_header), sizeof(struct batadv_icmp_packet), "BAT ICMP");
icmp_packet = (struct batadv_icmp_packet *)(packet_buff + sizeof(struct ether_header));
+ tp = (struct batadv_icmp_tp_packet *)icmp_packet;
if (!time_printed)
print_time();
@@ -753,7 +756,8 @@ static void dump_batman_icmp(unsigned char *packet_buff, ssize_t buff_len, int r
printf("BAT %s > ",
get_name_by_macaddr((struct ether_addr *)icmp_packet->orig, read_opt));
- name = get_name_by_macaddr((struct ether_addr *)icmp_packet->dst, read_opt);
+ name = get_name_by_macaddr((struct ether_addr *)icmp_packet->dst,
+ read_opt);
switch (icmp_packet->msg_type) {
case BATADV_ECHO_REPLY:
@@ -774,6 +778,14 @@ static void dump_batman_icmp(unsigned char *packet_buff, ssize_t buff_len, int r
icmp_packet->ttl, icmp_packet->version,
(size_t)buff_len - sizeof(struct ether_header));
break;
+ case BATADV_TP:
+ printf("%s: ICMP TP type %s (%hhu), id %hhu, seq %u, ttl %2d, v %d, length %zu\n",
+ name, tp->subtype == BATADV_TP_MSG ? "MSG" :
+ tp->subtype == BATADV_TP_ACK ? "ACK" : "N/A",
+ tp->subtype, tp->uid, ntohl(tp->seqno), tp->ttl,
+ tp->version,
+ (size_t)buff_len - sizeof(struct ether_header));
+ break;
default:
printf("%s: ICMP type %hhu, length %zu\n",
name, icmp_packet->msg_type,
diff --git a/tp_meter.c b/tp_meter.c
new file mode 100644
index 0000000..e935564
--- /dev/null
+++ b/tp_meter.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2013-2016 B.A.T.M.A.N. contributors:
+ *
+ * Antonio Quartulli <a@unstable.cc>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include <netinet/ether.h>
+#include <netinet/in.h>
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include "main.h"
+#include "functions.h"
+#include "packet.h"
+#include "bat-hosts.h"
+#include "debugfs.h"
+
+struct ether_addr *dst_mac;
+int tp_fd = -1;
+
+void tp_sig_handler(int sig)
+{
+ int write_bytes;
+ struct batadv_icmp_user_packet icmp;
+
+ switch (sig) {
+ case SIGINT:
+ case SIGTERM:
+ fflush(stdout);
+ memcpy(&icmp.dst, dst_mac, ETH_ALEN);
+ icmp.version = BATADV_COMPAT_VERSION;
+ icmp.cmd_type = BATADV_TP_STOP;
+
+ write_bytes = write(tp_fd, &icmp, sizeof(icmp));
+ if (write_bytes < 0) {
+ printf("sig_handler can't write to fd for %d, %s\n",
+ write_bytes, strerror(write_bytes));
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void tp_meter_usage(void)
+{
+ fprintf(stderr, "Usage: batctl tp [parameters] <MAC>\n");
+ fprintf(stderr, "Parameters:\n");
+ fprintf(stderr, "\t -t <time> test length in milliseconds\n");
+ fprintf(stderr, "\t -n don't convert addresses to bat-host names\n");
+}
+
+int tp_meter(char *mesh_iface, int argc, char **argv)
+{
+ struct batadv_icmp_user_packet icmp;
+ struct batadv_icmp_tp_result_packet result;
+ struct bat_host *bat_host;
+ fd_set read_socket;
+ unsigned long int throughput;
+ char *dst_string;
+ int ret = EXIT_FAILURE;
+ int write_error;
+ int found_args = 1, read_opt = USE_BAT_HOSTS;
+ char optchar, *debugfs_mnt;
+ char icmp_socket[MAX_PATH+1];
+ uint32_t time = 0;
+
+ while ((optchar = getopt(argc, argv, "t:n")) != -1) {
+ switch (optchar) {
+ case 't':
+ found_args += 2;
+ time = strtoul(optarg, NULL, 10);
+ break;
+ case 'n':
+ read_opt &= ~USE_BAT_HOSTS;
+ found_args += 1;
+ break;
+ default:
+ tp_meter_usage();
+ return EXIT_FAILURE;
+ }
+ }
+
+ if (argc <= found_args) {
+ tp_meter_usage();
+ return EXIT_FAILURE;
+ }
+
+ signal(SIGINT, tp_sig_handler);
+ signal(SIGTERM, tp_sig_handler);
+
+ dst_string = argv[found_args];
+ bat_hosts_init(read_opt);
+ bat_host = bat_hosts_find_by_name(dst_string);
+
+ if (bat_host)
+ dst_mac = &bat_host->mac_addr;
+
+ if (!dst_mac) {
+ dst_mac = ether_aton(dst_string);
+
+ if (!dst_mac) {
+ printf("Error - the tp meter destination is not a mac address or bat-host name: %s\n",
+ dst_string);
+ goto out;
+ }
+ }
+
+ debugfs_mnt = debugfs_mount(NULL);
+ if (!debugfs_mnt) {
+ printf("Error - can't mount or find debugfs\n");
+ goto out;
+ }
+
+ debugfs_make_path(SOCKET_PATH_FMT, mesh_iface, icmp_socket,
+ sizeof(icmp_socket));
+
+ tp_fd = open(icmp_socket, O_RDWR);
+
+ if (tp_fd < 0) {
+ printf("Error - can't open a connection to the batman adv kernel module via the socket '%s': %s\n",
+ icmp_socket, strerror(errno));
+ printf("Check whether the module is loaded and active.\n");
+ goto out;
+ }
+
+ memcpy(&icmp.dst, dst_mac, ETH_ALEN);
+ icmp.version = BATADV_COMPAT_VERSION;
+ icmp.cmd_type = BATADV_TP_START;
+ icmp.arg1 = time;
+
+ if (bat_host && (read_opt & USE_BAT_HOSTS))
+ dst_string = bat_host->name;
+ else
+ dst_string = ether_ntoa_long(dst_mac);
+
+ printf("Throughput meter called towards %s\n", dst_string);
+
+ write_error = write(tp_fd, &icmp, sizeof(icmp));
+ if (write_error < 0) {
+ printf("Can't write to fd for %s. %d, %s\n", icmp_socket,
+ write_error, strerror(write_error));
+ goto out;
+ }
+
+ FD_ZERO(&read_socket);
+ FD_SET(tp_fd, &read_socket);
+
+ select(tp_fd + 1, &read_socket, NULL, NULL, NULL);
+ /* a size icmp_packet_rr is read, because that is written
+ * kernel function only handles such structure
+ */
+ if (read(tp_fd, &result, sizeof(result))) {
+ switch (result.return_value) {
+ case BATADV_TP_DST_UNREACHABLE:
+ fprintf(stderr, "Destination unreachable\n");
+ break;
+ case BATADV_TP_RESEND_LIMIT:
+ fprintf(stderr,
+ "The number of retry for the same window exceeds the limit, test aborted\n");
+ break;
+ case BATADV_TP_ALREADY_ONGOING:
+ fprintf(stderr,
+ "Cannot run two test towards the same node\n");
+ break;
+ case BATADV_TP_MEMORY_ERROR:
+ fprintf(stderr,
+ "Kernel cannot allocate memory, aborted\n");
+ break;
+ case BATADV_TP_TOO_MANY:
+ fprintf(stderr, "Too many ongoing sessions\n");
+ break;
+ case BATADV_TP_SIGINT:
+ printf("SIGINT received: test aborted\n");
+ /* fall through and print the partial result */
+ case BATADV_TP_COMPLETE:
+ throughput = result.total_bytes / result.test_time * 1000;
+ printf("Test duration %ums.\n", result.test_time);
+ printf("Sent %u Bytes.\n", result.total_bytes);
+ printf("Throughput: ");
+ if (throughput > (1UL<<30))
+ printf("%.2f GB/s (%2.f Gbps)\n",
+ (float)throughput / (1<<30),
+ (float)throughput * 8 / 1000000000);
+ else if (throughput > (1UL<<20))
+ printf("%.2f MB/s (%.2f Mbps)\n",
+ (float)throughput / (1<<20),
+ (float)throughput * 8 / 1000000);
+ else if (throughput > (1UL<<10))
+ printf("%.2f KB/s (%.2f Kbps)\n",
+ (float)throughput / (1<<10),
+ (float)throughput * 8 / 1000);
+ else
+ printf("%lu Bytes/s (%lu Bps)\n",
+ throughput, throughput * 8);
+ break;
+ default:
+ printf("Unrecognized return value %d\n", result.return_value);
+ }
+ }
+out:
+ bat_hosts_free();
+ if (tp_fd)
+ close(tp_fd);
+ return ret;
+}
diff --git a/tp_meter.h b/tp_meter.h
new file mode 100644
index 0000000..59bca07
--- /dev/null
+++ b/tp_meter.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013-2016 B.A.T.M.A.N. contributors:
+ *
+ * Antonio Quartulli <a@unstable.cc>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+int tp_meter(char *mesh_iface, int argc, char **argv);
--
2.7.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC 0/5] batman-adv: Throughput meter
2016-02-18 17:25 [B.A.T.M.A.N.] [RFC 0/5] batman-adv: Throughput meter Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 1/5] batman-adv: return netdev status in the TX path Sven Eckelmann
@ 2016-02-26 10:41 ` Edo Monticelli
1 sibling, 0 replies; 7+ messages in thread
From: Edo Monticelli @ 2016-02-26 10:41 UTC (permalink / raw)
To: Sven Eckelmann, b.a.t.m.a.n
Hi Sven,
thanks for your email and sorry for the late reply.
I shifted my interests and I am currently working as front-end
developer, I am afraid that my C skills could be a bit rusty :)
In addition so much is going on both on the professional and personal
life that I am afraid at least for the time being I hardly could inject
a new project.
best,
Edo
On 02/18/2016 06:25 PM, Sven Eckelmann wrote:
> Hi,
>
> do you still remember GSOC 2012? Yes, it is really long ago. It was a time
> when winters were still cold, summers still hot and it was still politically
> correct to say "bandwidth meter" when you actually meant "throughput meter".
>
> Three students tried their best to implement some of the ideas floating around
> in the B.A.T.M.A.N. advanced community. And after some more work, most of the
> features reached the finishing line. TVLV [1] and the fragmentation v2 [2]
> were both integrated as part of the COMPAT 15 bump. But the "bandwidth
> meter" [3] was never ready to being merged.
>
> Nevertheless, the lessons learned in the first implementation [4] inspired
> different people to continue working on it. Especially Antonio Quartulli
> worked on his own version to increase its usefulness. And this feature makes
> even more sense since we reached the new "throughput based metric" time epoch
> with the introduction of B.A.T.M.A.N. V.
>
> I hope we can reignite interest in this feature with a rebased and refurbished
> version of this patchset. Both the batman-adv and batctl patches are based on
> the newest revision in their respective master branches. Also a branch called
> "tp_meter" was created in the batctl.git and batman-adv.git repository with
> these patches already applied.
>
>
> batman-adv
> ==========
>
> Antonio Quartulli (2):
> batman-adv: return netdev status in the TX path
> batman-adv: use another ICMP packet when sending command from userspace
> batman-adv: throughput meter implementation
>
> Sven Eckelmann (1):
> batman-adv: Add compatibility code for to_delayed_work
>
>
> compat-include/linux/netdevice.h | 17 +
> compat-include/linux/workqueue.h | 46 ++
> net/batman-adv/Makefile | 1 +
> net/batman-adv/fragmentation.c | 41 +-
> net/batman-adv/fragmentation.h | 6 +-
> net/batman-adv/icmp_socket.c | 225 +++---
> net/batman-adv/icmp_socket.h | 5 +-
> net/batman-adv/main.c | 6 +-
> net/batman-adv/main.h | 24 +-
> net/batman-adv/packet.h | 120 ++++
> net/batman-adv/routing.c | 33 +-
> net/batman-adv/send.c | 25 +-
> net/batman-adv/soft-interface.c | 2 +
> net/batman-adv/tp_meter.c | 1451 ++++++++++++++++++++++++++++++++++++++
> net/batman-adv/tp_meter.h | 34 +
> net/batman-adv/types.h | 113 +++
> 16 files changed, 2005 insertions(+), 144 deletions(-)
>
>
>
> batctl
> ======
>
> Antonio Quartulli (1):
> batctl: introduce throughput meter support
>
>
> Makefile | 2 +-
> main.c | 6 ++
> man/batctl.8 | 24 ++++++-
> packet.h | 120 +++++++++++++++++++++++++++++++
> tcpdump.c | 14 +++-
> tp_meter.c | 227 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> tp_meter.h | 22 ++++++
> 7 files changed, 411 insertions(+), 4 deletions(-)
>
> Kind regards,
> Sven
>
> [1] https://www.open-mesh.org/projects/open-mesh/wiki/2012-10-01-GSoC-2012-Spyros-Gasteros-Final-Report
> [2] https://www.open-mesh.org/projects/open-mesh/wiki/2012-09-24-GSoC-2012-Martin-Hundebolls-Final-Report
> [3] https://www.open-mesh.org/projects/open-mesh/wiki/2012-10-06-GSoC-2012-Edo-Monticellis-Final-Report
> [4] https://lists.open-mesh.org/pipermail/b.a.t.m.a.n/2012-August/007924.html
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-02-26 10:41 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-02-18 17:25 [B.A.T.M.A.N.] [RFC 0/5] batman-adv: Throughput meter Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 1/5] batman-adv: return netdev status in the TX path Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 2/5] batman-adv: use another ICMP packet when sending command from userspace Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 3/5] batman-adv: Add compatibility code for to_delayed_work Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 4/5] batman-adv: throughput meter implementation Sven Eckelmann
2016-02-18 17:26 ` [B.A.T.M.A.N.] [RFC 5/5] batctl: introduce throughput meter support Sven Eckelmann
2016-02-26 10:41 ` [B.A.T.M.A.N.] [RFC 0/5] batman-adv: Throughput meter Edo Monticelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).