* Batman-Adv Use Case Question
@ 2020-01-16 20:06 Martin, Jeremy J CIV USARMY CCDC C5ISR (USA)
0 siblings, 0 replies; only message in thread
From: Martin, Jeremy J CIV USARMY CCDC C5ISR (USA) @ 2020-01-16 20:06 UTC (permalink / raw)
To: b.a.t.m.a.n
My/My Teams intent is to have 4 radios in total, 2 on one pc and two on another. Our plan is to have Batman take care of the switching between which radio to use in order to transmit data between these two PC's. One radio is high frequency radio (60 Ghz) and the other would be a lower frequency radio and the idea is to have batman switch between these radios once the higher frequency radio is dropping between a certain TQ. My primary questions regarding this scenario would be, 1) Are there specific standards the radio chipsets would need to support in order for them to work in this scenario?. 2) Would Batman-adv be adequate enough to be able to handle a 1Gb/s data transmission and be able to swap accordingly to the lower frequency radio?
Best,
Jeremy Martin
Office: (443)-395-7475
Jeremy.j.martin33.civ@mail.mil
Radio Frequency Communications Division, RF Modeling and Simulation Branch
C5ISR Center, Space and Terrestrial Communications Directorate
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-01-16 20:06 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-16 20:06 Batman-Adv Use Case Question Martin, Jeremy J CIV USARMY CCDC C5ISR (USA)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).