[PATCH AUTOSEL 5.4 056/350] selftests/bpf: Correct path to include msg + path

[PATCH AUTOSEL 5.4 056/350] selftests/bpf: Correct path to include msg + path

[Sasha Levin]

From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

[ Upstream commit c588146378962786ddeec817f7736a53298a7b01 ]

The "path" buf is supposed to contain path + printf msg up to 24 bytes.
It will be cut anyway, but compiler generates truncation warns like:

"
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c: In
function ‘setup_cgroup_environment’:
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:34:
warning: ‘/cgroup.controllers’ directive output may be truncated
writing 19 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
				  ^~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:2:
note: ‘snprintf’ output between 20 and 4116 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:34:
warning: ‘/cgroup.subtree_control’ directive output may be truncated
writing 23 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
				  ^~~~~~~~~~~~~~~~~~~~~~~
cgroup_path);
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:2:
note: ‘snprintf’ output between 24 and 4120 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
cgroup_path);
"

In order to avoid warns, lets decrease buf size for cgroup workdir on
24 bytes with assumption to include also "/cgroup.subtree_control" to
the address. The cut will never happen anyway.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191002120404.26962-3-ivan.khoronzhuk@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/cgroup_helpers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/cgroup_helpers.c b/tools/testing/selftests/bpf/cgroup_helpers.c
index e95c33e333a40..b29a73fe64dbc 100644
--- a/tools/testing/selftests/bpf/cgroup_helpers.c
+++ b/tools/testing/selftests/bpf/cgroup_helpers.c
@@ -98,7 +98,7 @@ int enable_all_controllers(char *cgroup_path)
  */
 int setup_cgroup_environment(void)
 {
-	char cgroup_workdir[PATH_MAX + 1];
+	char cgroup_workdir[PATH_MAX - 24];
 
 	format_cgroup_path(cgroup_workdir, "");
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 079/350] selftests/bpf: Fix btf_dump padding test case

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 76790c7c66ccc8695afc75e73f54c0ca86267ed2 ]

Existing padding test case for btf_dump has a good test that was
supposed to test padding generation at the end of a struct, but its
expected output was specified incorrectly. Fix this.

Fixes: 2d2a3ad872f8 ("selftests/bpf: add btf_dump BTF-to-C conversion tests")
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191008231009.2991130-4-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/bpf/progs/btf_dump_test_case_padding.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/progs/btf_dump_test_case_padding.c b/tools/testing/selftests/bpf/progs/btf_dump_test_case_padding.c
index 3a62119c74986..35c512818a56b 100644
--- a/tools/testing/selftests/bpf/progs/btf_dump_test_case_padding.c
+++ b/tools/testing/selftests/bpf/progs/btf_dump_test_case_padding.c
@@ -62,6 +62,10 @@ struct padded_a_lot {
  *	long: 64;
  *	long: 64;
  *	int b;
+ *	long: 32;
+ *	long: 64;
+ *	long: 64;
+ *	long: 64;
  *};
  *
  */
@@ -95,7 +99,6 @@ struct zone_padding {
 struct zone {
 	int a;
 	short b;
-	short: 16;
 	struct zone_padding __pad__;
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 080/350] libbpf: Fix struct end padding in btf_dump

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit b4099769f3321a8d258a47a8b4b9d278dad28a73 ]

Fix a case where explicit padding at the end of a struct is necessary
due to non-standart alignment requirements of fields (which BTF doesn't
capture explicitly).

Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191008231009.2991130-2-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/btf_dump.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index ede55fec36184..87f27e2664c5d 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -876,7 +876,6 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 	__u16 vlen = btf_vlen(t);
 
 	packed = is_struct ? btf_is_struct_packed(d->btf, id, t) : 0;
-	align = packed ? 1 : btf_align_of(d->btf, id);
 
 	btf_dump_printf(d, "%s%s%s {",
 			is_struct ? "struct" : "union",
@@ -906,6 +905,13 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 		btf_dump_printf(d, ";");
 	}
 
+	/* pad at the end, if necessary */
+	if (is_struct) {
+		align = packed ? 1 : btf_align_of(d->btf, id);
+		btf_dump_emit_bit_padding(d, off, t->size * 8, 0, align,
+					  lvl + 1);
+	}
+
 	if (vlen)
 		btf_dump_printf(d, "\n");
 	btf_dump_printf(d, "%s}", pfx(lvl));
-- 
2.20.1

[PATCH AUTOSEL 5.4 081/350] libbpf: Fix passing uninitialized bytes to setsockopt

[Sasha Levin]

From: Ilya Maximets <i.maximets@ovn.org>

[ Upstream commit 25bfef430e960e695403b5d9c8dcc11b9f5d62be ]

'struct xdp_umem_reg' has 4 bytes of padding at the end that makes
valgrind complain about passing uninitialized stack memory to the
syscall:

  Syscall param socketcall.setsockopt() points to uninitialised byte(s)
    at 0x4E7AB7E: setsockopt (in /usr/lib64/libc-2.29.so)
    by 0x4BDE035: xsk_umem__create@@LIBBPF_0.0.4 (xsk.c:172)
  Uninitialised value was created by a stack allocation
    at 0x4BDDEBA: xsk_umem__create@@LIBBPF_0.0.4 (xsk.c:140)

Padding bytes appeared after introducing of a new 'flags' field.
memset() is required to clear them.

Fixes: 10d30e301732 ("libbpf: add flags to umem config")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191009164929.17242-1-i.maximets@ovn.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/xsk.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index a902838f9fccd..9d53480862030 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -163,6 +163,7 @@ int xsk_umem__create_v0_0_4(struct xsk_umem **umem_ptr, void *umem_area,
 	umem->umem_area = umem_area;
 	xsk_set_umem_config(&umem->config, usr_config);
 
+	memset(&mr, 0, sizeof(mr));
 	mr.addr = (uintptr_t)umem_area;
 	mr.len = size;
 	mr.chunk_size = umem->config.frame_size;
-- 
2.20.1

[PATCH AUTOSEL 5.4 123/350] bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()

[Sasha Levin]

From: Song Liu <songliubraving@fb.com>

[ Upstream commit eac9153f2b584c702cea02c1f1a57d85aa9aea42 ]

bpf stackmap with build-id lookup (BPF_F_STACK_BUILD_ID) can trigger A-A
deadlock on rq_lock():

rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[...]
Call Trace:
 try_to_wake_up+0x1ad/0x590
 wake_up_q+0x54/0x80
 rwsem_wake+0x8a/0xb0
 bpf_get_stack+0x13c/0x150
 bpf_prog_fbdaf42eded9fe46_on_event+0x5e3/0x1000
 bpf_overflow_handler+0x60/0x100
 __perf_event_overflow+0x4f/0xf0
 perf_swevent_overflow+0x99/0xc0
 ___perf_sw_event+0xe7/0x120
 __schedule+0x47d/0x620
 schedule+0x29/0x90
 futex_wait_queue_me+0xb9/0x110
 futex_wait+0x139/0x230
 do_futex+0x2ac/0xa50
 __x64_sys_futex+0x13c/0x180
 do_syscall_64+0x42/0x100
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

This can be reproduced by:
1. Start a multi-thread program that does parallel mmap() and malloc();
2. taskset the program to 2 CPUs;
3. Attach bpf program to trace_sched_switch and gather stackmap with
   build-id, e.g. with trace.py from bcc tools:
   trace.py -U -p <pid> -s <some-bin,some-lib> t:sched:sched_switch

A sample reproducer is attached at the end.

This could also trigger deadlock with other locks that are nested with
rq_lock.

Fix this by checking whether irqs are disabled. Since rq_lock and all
other nested locks are irq safe, it is safe to do up_read() when irqs are
not disable. If the irqs are disabled, postpone up_read() in irq_work.

Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191014171223.357174-1-songliubraving@fb.com

Reproducer:
============================ 8< ============================

char *filename;

void *worker(void *p)
{
        void *ptr;
        int fd;
        char *pptr;

        fd = open(filename, O_RDONLY);
        if (fd < 0)
                return NULL;
        while (1) {
                struct timespec ts = {0, 1000 + rand() % 2000};

                ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0);
                usleep(1);
                if (ptr == MAP_FAILED) {
                        printf("failed to mmap\n");
                        break;
                }
                munmap(ptr, 4096 * 64);
                usleep(1);
                pptr = malloc(1);
                usleep(1);
                pptr[0] = 1;
                usleep(1);
                free(pptr);
                usleep(1);
                nanosleep(&ts, NULL);
        }
        close(fd);
        return NULL;
}

int main(int argc, char *argv[])
{
        void *ptr;
        int i;
        pthread_t threads[THREAD_COUNT];

        if (argc < 2)
                return 0;

        filename = argv[1];

        for (i = 0; i < THREAD_COUNT; i++) {
                if (pthread_create(threads + i, NULL, worker, NULL)) {
                        fprintf(stderr, "Error creating thread\n");
                        return 0;
                }
        }

        for (i = 0; i < THREAD_COUNT; i++)
                pthread_join(threads[i], NULL);
        return 0;
}
============================ 8< ============================

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/stackmap.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index 052580c33d268..173e983619d77 100644
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -287,7 +287,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,
 	bool irq_work_busy = false;
 	struct stack_map_irq_work *work = NULL;
 
-	if (in_nmi()) {
+	if (irqs_disabled()) {
 		work = this_cpu_ptr(&up_read_work);
 		if (work->irq_work.flags & IRQ_WORK_BUSY)
 			/* cannot queue more up_read, fallback */
@@ -295,8 +295,9 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,
 	}
 
 	/*
-	 * We cannot do up_read() in nmi context. To do build_id lookup
-	 * in nmi context, we need to run up_read() in irq_work. We use
+	 * We cannot do up_read() when the irq is disabled, because of
+	 * risk to deadlock with rq_lock. To do build_id lookup when the
+	 * irqs are disabled, we need to run up_read() in irq_work. We use
 	 * a percpu variable to do the irq_work. If the irq_work is
 	 * already used by another lookup, we fall back to report ips.
 	 *
-- 
2.20.1

[PATCH AUTOSEL 5.4 132/350] selftests/bpf: Make a copy of subtest name

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit f90415e9600c5227131531c0ed11514a2d3bbe62 ]

test_progs never created a copy of subtest name, rather just stored
pointer to whatever string test provided. This is bad as that string
might be freed or modified by the end of subtest. Fix this by creating
a copy of given subtest name when subtest starts.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-6-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_progs.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index af75a1c7a4587..3bf18364c67c9 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -20,7 +20,7 @@ struct prog_test_def {
 	bool tested;
 	bool need_cgroup_cleanup;
 
-	const char *subtest_name;
+	char *subtest_name;
 	int subtest_num;
 
 	/* store counts before subtest started */
@@ -81,16 +81,17 @@ void test__end_subtest()
 	fprintf(env.stdout, "#%d/%d %s:%s\n",
 	       test->test_num, test->subtest_num,
 	       test->subtest_name, sub_error_cnt ? "FAIL" : "OK");
+
+	free(test->subtest_name);
+	test->subtest_name = NULL;
 }
 
 bool test__start_subtest(const char *name)
 {
 	struct prog_test_def *test = env.test;
 
-	if (test->subtest_name) {
+	if (test->subtest_name)
 		test__end_subtest();
-		test->subtest_name = NULL;
-	}
 
 	test->subtest_num++;
 
@@ -104,7 +105,13 @@ bool test__start_subtest(const char *name)
 	if (!should_run(&env.subtest_selector, test->subtest_num, name))
 		return false;
 
-	test->subtest_name = name;
+	test->subtest_name = strdup(name);
+	if (!test->subtest_name) {
+		fprintf(env.stderr,
+			"Subtest #%d: failed to copy subtest name!\n",
+			test->subtest_num);
+		return false;
+	}
 	env.test->old_error_cnt = env.test->error_cnt;
 
 	return true;
-- 
2.20.1

[PATCH AUTOSEL 5.4 193/350] libbpf: Fix error handling in bpf_map__reuse_fd()

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit d1b4574a4b86565325ef2e545eda8dfc9aa07c60 ]

bpf_map__reuse_fd() was calling close() in the error path before returning
an error value based on errno. However, close can change errno, so that can
lead to potentially misleading error messages. Instead, explicitly store
errno in the err variable before each goto.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index e0276520171b9..a267cd0c0ce28 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -1897,16 +1897,22 @@ int bpf_map__reuse_fd(struct bpf_map *map, int fd)
 		return -errno;
 
 	new_fd = open("/", O_RDONLY | O_CLOEXEC);
-	if (new_fd < 0)
+	if (new_fd < 0) {
+		err = -errno;
 		goto err_free_new_name;
+	}
 
 	new_fd = dup3(fd, new_fd, O_CLOEXEC);
-	if (new_fd < 0)
+	if (new_fd < 0) {
+		err = -errno;
 		goto err_close_new_fd;
+	}
 
 	err = zclose(map->fd);
-	if (err)
+	if (err) {
+		err = -errno;
 		goto err_close_new_fd;
+	}
 	free(map->name);
 
 	map->fd = new_fd;
@@ -1925,7 +1931,7 @@ int bpf_map__reuse_fd(struct bpf_map *map, int fd)
 	close(new_fd);
 err_free_new_name:
 	free(new_name);
-	return -errno;
+	return err;
 }
 
 int bpf_map__resize(struct bpf_map *map, __u32 max_entries)
-- 
2.20.1

[PATCH AUTOSEL 5.4 229/350] perf tools: Splice events onto evlist even on error

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 8e8714c3d157568b7a769917a5e05573bbaf5af0 ]

If event parsing fails the event list is leaked, instead splice the list
onto the out result and let the caller cleanup.

An example input for parse_events found by libFuzzer that reproduces
this memory leak is 'm{'.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191025180827.191916-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/parse-events.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index b5e2adef49de9..d5ea043d3fc4c 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1927,15 +1927,20 @@ int parse_events(struct evlist *evlist, const char *str,
 
 	ret = parse_events__scanner(str, &parse_state, PE_START_EVENTS);
 	perf_pmu__parse_cleanup();
+
+	if (!ret && list_empty(&parse_state.list)) {
+		WARN_ONCE(true, "WARNING: event parser found nothing\n");
+		return -1;
+	}
+
+	/*
+	 * Add list to the evlist even with errors to allow callers to clean up.
+	 */
+	perf_evlist__splice_list_tail(evlist, &parse_state.list);
+
 	if (!ret) {
 		struct evsel *last;
 
-		if (list_empty(&parse_state.list)) {
-			WARN_ONCE(true, "WARNING: event parser found nothing\n");
-			return -1;
-		}
-
-		perf_evlist__splice_list_tail(evlist, &parse_state.list);
 		evlist->nr_groups += parse_state.nr_groups;
 		last = evlist__last(evlist);
 		last->cmdline_group_boundary = true;
-- 
2.20.1

[PATCH AUTOSEL 5.4 235/350] perf parse: If pmu configuration fails free terms

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 38f2c4226e6bc3e8c41c318242821ba5dc825aba ]

Avoid a memory leak when the configuration fails.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191030223448.12930-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/parse-events.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index d5ea043d3fc4c..422ad1888e74f 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1365,8 +1365,15 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
 	if (get_config_terms(head_config, &config_terms))
 		return -ENOMEM;
 
-	if (perf_pmu__config(pmu, &attr, head_config, parse_state->error))
+	if (perf_pmu__config(pmu, &attr, head_config, parse_state->error)) {
+		struct perf_evsel_config_term *pos, *tmp;
+
+		list_for_each_entry_safe(pos, tmp, &config_terms, list) {
+			list_del_init(&pos->list);
+			free(pos);
+		}
 		return -EINVAL;
+	}
 
 	evsel = __add_event(list, &parse_state->idx, &attr,
 			    get_config_name(head_config), pmu,
-- 
2.20.1

[PATCH AUTOSEL 5.4 242/350] libbpf: Fix negative FD close() in xsk_setup_xdp_prog()

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 9656b346b280c3e49c8a116c3a715f966633b161 ]

Fix issue reported by static analysis (Coverity). If bpf_prog_get_fd_by_id()
fails, xsk_lookup_bpf_maps() will fail as well and clean-up code will attempt
close() with fd=-1. Fix by checking bpf_prog_get_fd_by_id() return result and
exiting early.

Fixes: 10a13bb40e54 ("libbpf: remove qidconf and better support external bpf programs.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107054059.313884-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/xsk.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index 9d53480862030..a73b79d293337 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -466,6 +466,8 @@ static int xsk_setup_xdp_prog(struct xsk_socket *xsk)
 		}
 	} else {
 		xsk->prog_fd = bpf_prog_get_fd_by_id(prog_id);
+		if (xsk->prog_fd < 0)
+			return -errno;
 		err = xsk_lookup_bpf_maps(xsk);
 		if (err) {
 			close(xsk->prog_fd);
-- 
2.20.1

[PATCH AUTOSEL 5.4 243/350] s390/bpf: Use kvcalloc for addrs array

[Sasha Levin]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit 166f11d11f6f70439830d09bfa5552ec1b368494 ]

A BPF program may consist of 1m instructions, which means JIT
instruction-address mapping can be as large as 4m. s390 has
FORCE_MAX_ZONEORDER=9 (for memory hotplug reasons), which means maximum
kmalloc size is 1m. This makes it impossible to JIT programs with more
than 256k instructions.

Fix by using kvcalloc, which falls back to vmalloc for larger
allocations. An alternative would be to use a radix tree, but that is
not supported by bpf_prog_fill_jited_linfo.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107141838.92202-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/net/bpf_jit_comp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index ce88211b9c6cd..c8c16b5eed6be 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -23,6 +23,7 @@
 #include <linux/filter.h>
 #include <linux/init.h>
 #include <linux/bpf.h>
+#include <linux/mm.h>
 #include <asm/cacheflush.h>
 #include <asm/dis.h>
 #include <asm/facility.h>
@@ -1369,7 +1370,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	}
 
 	memset(&jit, 0, sizeof(jit));
-	jit.addrs = kcalloc(fp->len + 1, sizeof(*jit.addrs), GFP_KERNEL);
+	jit.addrs = kvcalloc(fp->len + 1, sizeof(*jit.addrs), GFP_KERNEL);
 	if (jit.addrs == NULL) {
 		fp = orig_fp;
 		goto out;
@@ -1422,7 +1423,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	if (!fp->is_func || extra_pass) {
 		bpf_prog_fill_jited_linfo(fp, jit.addrs + 1);
 free_addrs:
-		kfree(jit.addrs);
+		kvfree(jit.addrs);
 		kfree(jit_data);
 		fp->aux->jit_data = NULL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.4 267/350] bpf, testing: Workaround a verifier failure for test_progs

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit b7a0d65d80a0c5034b366392624397a0915b7556 ]

With latest llvm compiler, running test_progs will have the following
verifier failure for test_sysctl_loop1.o:

  libbpf: load bpf program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  invalid indirect read from stack var_off (0x0; 0xff)+196 size 7
  ...
  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/sysctl'
  libbpf: failed to load object 'test_sysctl_loop1.o'

The related bytecode looks as below:

  0000000000000308 LBB0_8:
      97:       r4 = r10
      98:       r4 += -288
      99:       r4 += r7
     100:       w8 &= 255
     101:       r1 = r10
     102:       r1 += -488
     103:       r1 += r8
     104:       r2 = 7
     105:       r3 = 0
     106:       call 106
     107:       w1 = w0
     108:       w1 += -1
     109:       if w1 > 6 goto -24 <LBB0_5>
     110:       w0 += w8
     111:       r7 += 8
     112:       w8 = w0
     113:       if r7 != 224 goto -17 <LBB0_8>

And source code:

     for (i = 0; i < ARRAY_SIZE(tcp_mem); ++i) {
             ret = bpf_strtoul(value + off, MAX_ULONG_STR_LEN, 0,
                               tcp_mem + i);
             if (ret <= 0 || ret > MAX_ULONG_STR_LEN)
                     return 0;
             off += ret & MAX_ULONG_STR_LEN;
     }

Current verifier is not able to conclude that register w0 before '+'
at insn 110 has a range of 1 to 7 and thinks it is from 0 - 255. This
leads to more conservative range for w8 at insn 112, and later verifier
complaint.

Let us workaround this issue until we found a compiler and/or verifier
solution. The workaround in this patch is to make variable 'ret' volatile,
which will force a reload and then '&' operation to ensure better value
range. With this patch, I got the below byte code for the loop:

  0000000000000328 LBB0_9:
     101:       r4 = r10
     102:       r4 += -288
     103:       r4 += r7
     104:       w8 &= 255
     105:       r1 = r10
     106:       r1 += -488
     107:       r1 += r8
     108:       r2 = 7
     109:       r3 = 0
     110:       call 106
     111:       *(u32 *)(r10 - 64) = r0
     112:       r1 = *(u32 *)(r10 - 64)
     113:       if w1 s< 1 goto -28 <LBB0_5>
     114:       r1 = *(u32 *)(r10 - 64)
     115:       if w1 s> 7 goto -30 <LBB0_5>
     116:       r1 = *(u32 *)(r10 - 64)
     117:       w1 &= 7
     118:       w1 += w8
     119:       r7 += 8
     120:       w8 = w1
     121:       if r7 != 224 goto -21 <LBB0_9>

Insn 117 did the '&' operation and we got more precise value range
for 'w8' at insn 120. The test is happy then:

  #3/17 test_sysctl_loop1.o:OK

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191107170045.2503480-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/test_sysctl_loop1.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/progs/test_sysctl_loop1.c b/tools/testing/selftests/bpf/progs/test_sysctl_loop1.c
index 608a06871572d..d22e438198cf7 100644
--- a/tools/testing/selftests/bpf/progs/test_sysctl_loop1.c
+++ b/tools/testing/selftests/bpf/progs/test_sysctl_loop1.c
@@ -44,7 +44,10 @@ int sysctl_tcp_mem(struct bpf_sysctl *ctx)
 	unsigned long tcp_mem[TCP_MEM_LOOPS] = {};
 	char value[MAX_VALUE_STR_LEN];
 	unsigned char i, off = 0;
-	int ret;
+	/* a workaround to prevent compiler from generating
+	 * codes verifier cannot handle yet.
+	 */
+	volatile int ret;
 
 	if (ctx->write)
 		return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.4 306/350] selftests, bpf: Fix test_tc_tunnel hanging

[Sasha Levin]

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit 3b054b7133b4ad93671c82e8d6185258e3f1a7a5 ]

When run_kselftests.sh is run, it hangs after test_tc_tunnel.sh. The reason
is test_tc_tunnel.sh ensures the server ('nc -l') is run all the time,
starting it again every time it is expected to terminate. The exception is
the final client_connect: the server is not started anymore, which ensures
no process is kept running after the test is finished.

For a sit test, though, the script is terminated prematurely without the
final client_connect and the 'nc' process keeps running. This in turn causes
the run_one function in kselftest/runner.sh to hang forever, waiting for the
runaway process to finish.

Ensure a remaining server is terminated on cleanup.

Fixes: f6ad6accaa99 ("selftests/bpf: expand test_tc_tunnel with SIT encap")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/60919291657a9ee89c708d8aababc28ebe1420be.1573821780.git.jbenc@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_tc_tunnel.sh | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh
index ff0d31d38061f..7c76b841b17bb 100755
--- a/tools/testing/selftests/bpf/test_tc_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh
@@ -62,6 +62,10 @@ cleanup() {
 	if [[ -f "${infile}" ]]; then
 		rm "${infile}"
 	fi
+
+	if [[ -n $server_pid ]]; then
+		kill $server_pid 2> /dev/null
+	fi
 }
 
 server_listen() {
@@ -77,6 +81,7 @@ client_connect() {
 
 verify_data() {
 	wait "${server_pid}"
+	server_pid=
 	# sha1sum returns two fields [sha1] [filepath]
 	# convert to bash array and access first elem
 	insum=($(sha1sum ${infile}))
-- 
2.20.1

[PATCH AUTOSEL 5.4 307/350] selftests, bpf: Workaround an alu32 sub-register spilling issue

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 2ea2612b987ad703235c92be21d4e98ee9c2c67c ]

Currently, with latest llvm trunk, selftest test_progs failed obj
file test_seg6_loop.o with the following error in verifier:

  infinite loop detected at insn 76

The byte code sequence looks like below, and noted that alu32 has been
turned off by default for better generated codes in general:

      48:       w3 = 100
      49:       *(u32 *)(r10 - 68) = r3
      ...
  ;             if (tlv.type == SR6_TLV_PADDING) {
      76:       if w3 == 5 goto -18 <LBB0_19>
      ...
      85:       r1 = *(u32 *)(r10 - 68)
  ;     for (int i = 0; i < 100; i++) {
      86:       w1 += -1
      87:       if w1 == 0 goto +5 <LBB0_20>
      88:       *(u32 *)(r10 - 68) = r1

The main reason for verification failure is due to partial spills at
r10 - 68 for induction variable "i".

Current verifier only handles spills with 8-byte values. The above 4-byte
value spill to stack is treated to STACK_MISC and its content is not
saved. For the above example:

    w3 = 100
      R3_w=inv100 fp-64_w=inv1086626730498
    *(u32 *)(r10 - 68) = r3
      R3_w=inv100 fp-64_w=inv1086626730498
    ...
    r1 = *(u32 *)(r10 - 68)
      R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
      fp-64=inv1086626730498

To resolve this issue, verifier needs to be extended to track sub-registers
in spilling, or llvm needs to enhanced to prevent sub-register spilling
in register allocation phase. The former will increase verifier complexity
and the latter will need some llvm "hacking".

Let us workaround this issue by declaring the induction variable as "long"
type so spilling will happen at non sub-register level. We can revisit this
later if sub-register spilling causes similar or other verification issues.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191117214036.1309510-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/test_seg6_loop.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/progs/test_seg6_loop.c b/tools/testing/selftests/bpf/progs/test_seg6_loop.c
index c4d104428643e..69880c1e7700c 100644
--- a/tools/testing/selftests/bpf/progs/test_seg6_loop.c
+++ b/tools/testing/selftests/bpf/progs/test_seg6_loop.c
@@ -132,8 +132,10 @@ static __always_inline int is_valid_tlv_boundary(struct __sk_buff *skb,
 	*pad_off = 0;
 
 	// we can only go as far as ~10 TLVs due to the BPF max stack size
+	// workaround: define induction variable "i" as "long" instead
+	// of "int" to prevent alu32 sub-register spilling.
 	#pragma clang loop unroll(disable)
-	for (int i = 0; i < 100; i++) {
+	for (long i = 0; i < 100; i++) {
 		struct sr6_tlv_t tlv;
 
 		if (cur_off == *tlv_off)
-- 
2.20.1

[PATCH AUTOSEL 5.4 313/350] net-af_xdp: Use correct number of channels from ethtool

[Sasha Levin]

From: Luigi Rizzo <lrizzo@google.com>

[ Upstream commit 3de88c9113f88c04abda339f1aa629397bf89e02 ]

Drivers use different fields to report the number of channels, so take
the maximum of all data channels (rx, tx, combined) when determining the
size of the xsk map. The current code used only 'combined' which was set
to 0 in some drivers e.g. mlx4.

Tested: compiled and run xdpsock -q 3 -r -S on mlx4

Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20191119001951.92930-1-lrizzo@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/xsk.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index a73b79d293337..70f9e10de286e 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -344,13 +344,18 @@ static int xsk_get_max_queues(struct xsk_socket *xsk)
 		goto out;
 	}
 
-	if (err || channels.max_combined == 0)
+	if (err) {
 		/* If the device says it has no channels, then all traffic
 		 * is sent to a single stream, so max queues = 1.
 		 */
 		ret = 1;
-	else
-		ret = channels.max_combined;
+	} else {
+		/* Take the max of rx, tx, combined. Drivers return
+		 * the number of channels in different ways.
+		 */
+		ret = max(channels.max_rx, channels.max_tx);
+		ret = max(ret, (int)channels.max_combined);
+	}
 
 out:
 	close(fd);
-- 
2.20.1

[PATCH AUTOSEL 5.4 326/350] bpf: Switch bpf_map ref counter to atomic64_t so bpf_map_inc() never fails

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 1e0bd5a091e5d9e0f1d5b0e6329b87bb1792f784 ]

92117d8443bc ("bpf: fix refcnt overflow") turned refcounting of bpf_map into
potentially failing operation, when refcount reaches BPF_MAX_REFCNT limit
(32k). Due to using 32-bit counter, it's possible in practice to overflow
refcounter and make it wrap around to 0, causing erroneous map free, while
there are still references to it, causing use-after-free problems.

But having a failing refcounting operations are problematic in some cases. One
example is mmap() interface. After establishing initial memory-mapping, user
is allowed to arbitrarily map/remap/unmap parts of mapped memory, arbitrarily
splitting it into multiple non-contiguous regions. All this happening without
any control from the users of mmap subsystem. Rather mmap subsystem sends
notifications to original creator of memory mapping through open/close
callbacks, which are optionally specified during initial memory mapping
creation. These callbacks are used to maintain accurate refcount for bpf_map
(see next patch in this series). The problem is that open() callback is not
supposed to fail, because memory-mapped resource is set up and properly
referenced. This is posing a problem for using memory-mapping with BPF maps.

One solution to this is to maintain separate refcount for just memory-mappings
and do single bpf_map_inc/bpf_map_put when it goes from/to zero, respectively.
There are similar use cases in current work on tcp-bpf, necessitating extra
counter as well. This seems like a rather unfortunate and ugly solution that
doesn't scale well to various new use cases.

Another approach to solve this is to use non-failing refcount_t type, which
uses 32-bit counter internally, but, once reaching overflow state at UINT_MAX,
stays there. This utlimately causes memory leak, but prevents use after free.

But given refcounting is not the most performance-critical operation with BPF
maps (it's not used from running BPF program code), we can also just switch to
64-bit counter that can't overflow in practice, potentially disadvantaging
32-bit platforms a tiny bit. This simplifies semantics and allows above
described scenarios to not worry about failing refcount increment operation.

In terms of struct bpf_map size, we are still good and use the same amount of
space:

BEFORE (3 cache lines, 8 bytes of padding at the end):
struct bpf_map {
	const struct bpf_map_ops  * ops __attribute__((__aligned__(64))); /*     0     8 */
	struct bpf_map *           inner_map_meta;       /*     8     8 */
	void *                     security;             /*    16     8 */
	enum bpf_map_type  map_type;                     /*    24     4 */
	u32                        key_size;             /*    28     4 */
	u32                        value_size;           /*    32     4 */
	u32                        max_entries;          /*    36     4 */
	u32                        map_flags;            /*    40     4 */
	int                        spin_lock_off;        /*    44     4 */
	u32                        id;                   /*    48     4 */
	int                        numa_node;            /*    52     4 */
	u32                        btf_key_type_id;      /*    56     4 */
	u32                        btf_value_type_id;    /*    60     4 */
	/* --- cacheline 1 boundary (64 bytes) --- */
	struct btf *               btf;                  /*    64     8 */
	struct bpf_map_memory memory;                    /*    72    16 */
	bool                       unpriv_array;         /*    88     1 */
	bool                       frozen;               /*    89     1 */

	/* XXX 38 bytes hole, try to pack */

	/* --- cacheline 2 boundary (128 bytes) --- */
	atomic_t                   refcnt __attribute__((__aligned__(64))); /*   128     4 */
	atomic_t                   usercnt;              /*   132     4 */
	struct work_struct work;                         /*   136    32 */
	char                       name[16];             /*   168    16 */

	/* size: 192, cachelines: 3, members: 21 */
	/* sum members: 146, holes: 1, sum holes: 38 */
	/* padding: 8 */
	/* forced alignments: 2, forced holes: 1, sum forced holes: 38 */
} __attribute__((__aligned__(64)));

AFTER (same 3 cache lines, no extra padding now):
struct bpf_map {
	const struct bpf_map_ops  * ops __attribute__((__aligned__(64))); /*     0     8 */
	struct bpf_map *           inner_map_meta;       /*     8     8 */
	void *                     security;             /*    16     8 */
	enum bpf_map_type  map_type;                     /*    24     4 */
	u32                        key_size;             /*    28     4 */
	u32                        value_size;           /*    32     4 */
	u32                        max_entries;          /*    36     4 */
	u32                        map_flags;            /*    40     4 */
	int                        spin_lock_off;        /*    44     4 */
	u32                        id;                   /*    48     4 */
	int                        numa_node;            /*    52     4 */
	u32                        btf_key_type_id;      /*    56     4 */
	u32                        btf_value_type_id;    /*    60     4 */
	/* --- cacheline 1 boundary (64 bytes) --- */
	struct btf *               btf;                  /*    64     8 */
	struct bpf_map_memory memory;                    /*    72    16 */
	bool                       unpriv_array;         /*    88     1 */
	bool                       frozen;               /*    89     1 */

	/* XXX 38 bytes hole, try to pack */

	/* --- cacheline 2 boundary (128 bytes) --- */
	atomic64_t                 refcnt __attribute__((__aligned__(64))); /*   128     8 */
	atomic64_t                 usercnt;              /*   136     8 */
	struct work_struct work;                         /*   144    32 */
	char                       name[16];             /*   176    16 */

	/* size: 192, cachelines: 3, members: 21 */
	/* sum members: 154, holes: 1, sum holes: 38 */
	/* forced alignments: 2, forced holes: 1, sum forced holes: 38 */
} __attribute__((__aligned__(64)));

This patch, while modifying all users of bpf_map_inc, also cleans up its
interface to match bpf_map_put with separate operations for bpf_map_inc and
bpf_map_inc_with_uref (to match bpf_map_put and bpf_map_put_with_uref,
respectively). Also, given there are no users of bpf_map_inc_not_zero
specifying uref=true, remove uref flag and default to uref=false internally.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-2-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/netronome/nfp/bpf/offload.c  |  4 +-
 include/linux/bpf.h                           | 10 ++--
 kernel/bpf/inode.c                            |  2 +-
 kernel/bpf/map_in_map.c                       |  2 +-
 kernel/bpf/syscall.c                          | 51 ++++++++-----------
 kernel/bpf/verifier.c                         |  6 +--
 kernel/bpf/xskmap.c                           |  6 +--
 net/core/bpf_sk_storage.c                     |  2 +-
 8 files changed, 34 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/bpf/offload.c b/drivers/net/ethernet/netronome/nfp/bpf/offload.c
index 88fab6a82acff..06927ba5a3ae0 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/offload.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/offload.c
@@ -46,9 +46,7 @@ nfp_map_ptr_record(struct nfp_app_bpf *bpf, struct nfp_prog *nfp_prog,
 	/* Grab a single ref to the map for our record.  The prog destroy ndo
 	 * happens after free_used_maps().
 	 */
-	map = bpf_map_inc(map, false);
-	if (IS_ERR(map))
-		return PTR_ERR(map);
+	bpf_map_inc(map);
 
 	record = kmalloc(sizeof(*record), GFP_KERNEL);
 	if (!record) {
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 3bf3835d0e866..78d5233b4f8ec 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -99,8 +99,8 @@ struct bpf_map {
 	/* The 3rd and 4th cacheline with misc members to avoid false sharing
 	 * particularly with refcounting.
 	 */
-	atomic_t refcnt ____cacheline_aligned;
-	atomic_t usercnt;
+	atomic64_t refcnt ____cacheline_aligned;
+	atomic64_t usercnt;
 	struct work_struct work;
 	char name[BPF_OBJ_NAME_LEN];
 };
@@ -649,9 +649,9 @@ void bpf_map_free_id(struct bpf_map *map, bool do_idr_lock);
 
 struct bpf_map *bpf_map_get_with_uref(u32 ufd);
 struct bpf_map *__bpf_map_get(struct fd f);
-struct bpf_map * __must_check bpf_map_inc(struct bpf_map *map, bool uref);
-struct bpf_map * __must_check bpf_map_inc_not_zero(struct bpf_map *map,
-						   bool uref);
+void bpf_map_inc(struct bpf_map *map);
+void bpf_map_inc_with_uref(struct bpf_map *map);
+struct bpf_map * __must_check bpf_map_inc_not_zero(struct bpf_map *map);
 void bpf_map_put_with_uref(struct bpf_map *map);
 void bpf_map_put(struct bpf_map *map);
 int bpf_map_charge_memlock(struct bpf_map *map, u32 pages);
diff --git a/kernel/bpf/inode.c b/kernel/bpf/inode.c
index a70f7209cda3f..2f17f24258dc8 100644
--- a/kernel/bpf/inode.c
+++ b/kernel/bpf/inode.c
@@ -34,7 +34,7 @@ static void *bpf_any_get(void *raw, enum bpf_type type)
 		raw = bpf_prog_inc(raw);
 		break;
 	case BPF_TYPE_MAP:
-		raw = bpf_map_inc(raw, true);
+		bpf_map_inc_with_uref(raw);
 		break;
 	default:
 		WARN_ON_ONCE(1);
diff --git a/kernel/bpf/map_in_map.c b/kernel/bpf/map_in_map.c
index fab4fb134547d..4cbe987be35b4 100644
--- a/kernel/bpf/map_in_map.c
+++ b/kernel/bpf/map_in_map.c
@@ -98,7 +98,7 @@ void *bpf_map_fd_get_ptr(struct bpf_map *map,
 		return inner_map;
 
 	if (bpf_map_meta_equal(map->inner_map_meta, inner_map))
-		inner_map = bpf_map_inc(inner_map, false);
+		bpf_map_inc(inner_map);
 	else
 		inner_map = ERR_PTR(-EINVAL);
 
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index ace1cfaa24b6b..c8668ac70c982 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -313,7 +313,7 @@ static void bpf_map_free_deferred(struct work_struct *work)
 
 static void bpf_map_put_uref(struct bpf_map *map)
 {
-	if (atomic_dec_and_test(&map->usercnt)) {
+	if (atomic64_dec_and_test(&map->usercnt)) {
 		if (map->ops->map_release_uref)
 			map->ops->map_release_uref(map);
 	}
@@ -324,7 +324,7 @@ static void bpf_map_put_uref(struct bpf_map *map)
  */
 static void __bpf_map_put(struct bpf_map *map, bool do_idr_lock)
 {
-	if (atomic_dec_and_test(&map->refcnt)) {
+	if (atomic64_dec_and_test(&map->refcnt)) {
 		/* bpf_map_free_id() must be called first */
 		bpf_map_free_id(map, do_idr_lock);
 		btf_put(map->btf);
@@ -577,8 +577,8 @@ static int map_create(union bpf_attr *attr)
 	if (err)
 		goto free_map;
 
-	atomic_set(&map->refcnt, 1);
-	atomic_set(&map->usercnt, 1);
+	atomic64_set(&map->refcnt, 1);
+	atomic64_set(&map->usercnt, 1);
 
 	if (attr->btf_key_type_id || attr->btf_value_type_id) {
 		struct btf *btf;
@@ -655,21 +655,19 @@ struct bpf_map *__bpf_map_get(struct fd f)
 	return f.file->private_data;
 }
 
-/* prog's and map's refcnt limit */
-#define BPF_MAX_REFCNT 32768
-
-struct bpf_map *bpf_map_inc(struct bpf_map *map, bool uref)
+void bpf_map_inc(struct bpf_map *map)
 {
-	if (atomic_inc_return(&map->refcnt) > BPF_MAX_REFCNT) {
-		atomic_dec(&map->refcnt);
-		return ERR_PTR(-EBUSY);
-	}
-	if (uref)
-		atomic_inc(&map->usercnt);
-	return map;
+	atomic64_inc(&map->refcnt);
 }
 EXPORT_SYMBOL_GPL(bpf_map_inc);
 
+void bpf_map_inc_with_uref(struct bpf_map *map)
+{
+	atomic64_inc(&map->refcnt);
+	atomic64_inc(&map->usercnt);
+}
+EXPORT_SYMBOL_GPL(bpf_map_inc_with_uref);
+
 struct bpf_map *bpf_map_get_with_uref(u32 ufd)
 {
 	struct fd f = fdget(ufd);
@@ -679,38 +677,30 @@ struct bpf_map *bpf_map_get_with_uref(u32 ufd)
 	if (IS_ERR(map))
 		return map;
 
-	map = bpf_map_inc(map, true);
+	bpf_map_inc_with_uref(map);
 	fdput(f);
 
 	return map;
 }
 
 /* map_idr_lock should have been held */
-static struct bpf_map *__bpf_map_inc_not_zero(struct bpf_map *map,
-					      bool uref)
+static struct bpf_map *__bpf_map_inc_not_zero(struct bpf_map *map, bool uref)
 {
 	int refold;
 
-	refold = atomic_fetch_add_unless(&map->refcnt, 1, 0);
-
-	if (refold >= BPF_MAX_REFCNT) {
-		__bpf_map_put(map, false);
-		return ERR_PTR(-EBUSY);
-	}
-
+	refold = atomic64_fetch_add_unless(&map->refcnt, 1, 0);
 	if (!refold)
 		return ERR_PTR(-ENOENT);
-
 	if (uref)
-		atomic_inc(&map->usercnt);
+		atomic64_inc(&map->usercnt);
 
 	return map;
 }
 
-struct bpf_map *bpf_map_inc_not_zero(struct bpf_map *map, bool uref)
+struct bpf_map *bpf_map_inc_not_zero(struct bpf_map *map)
 {
 	spin_lock_bh(&map_idr_lock);
-	map = __bpf_map_inc_not_zero(map, uref);
+	map = __bpf_map_inc_not_zero(map, false);
 	spin_unlock_bh(&map_idr_lock);
 
 	return map;
@@ -1456,6 +1446,9 @@ static struct bpf_prog *____bpf_prog_get(struct fd f)
 	return f.file->private_data;
 }
 
+/* prog's refcnt limit */
+#define BPF_MAX_REFCNT 32768
+
 struct bpf_prog *bpf_prog_add(struct bpf_prog *prog, int i)
 {
 	if (atomic_add_return(i, &prog->aux->refcnt) > BPF_MAX_REFCNT) {
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index ffc3e53f53009..87181cd5bafd7 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -8008,11 +8008,7 @@ static int replace_map_fd_with_map_ptr(struct bpf_verifier_env *env)
 			 * will be used by the valid program until it's unloaded
 			 * and all maps are released in free_used_maps()
 			 */
-			map = bpf_map_inc(map, false);
-			if (IS_ERR(map)) {
-				fdput(f);
-				return PTR_ERR(map);
-			}
+			bpf_map_inc(map);
 
 			aux->map_index = env->used_map_cnt;
 			env->used_maps[env->used_map_cnt++] = map;
diff --git a/kernel/bpf/xskmap.c b/kernel/bpf/xskmap.c
index 82a1ffe15dfaa..08dccf733991c 100644
--- a/kernel/bpf/xskmap.c
+++ b/kernel/bpf/xskmap.c
@@ -18,10 +18,8 @@ struct xsk_map {
 
 int xsk_map_inc(struct xsk_map *map)
 {
-	struct bpf_map *m = &map->map;
-
-	m = bpf_map_inc(m, false);
-	return PTR_ERR_OR_ZERO(m);
+	bpf_map_inc(&map->map);
+	return 0;
 }
 
 void xsk_map_put(struct xsk_map *map)
diff --git a/net/core/bpf_sk_storage.c b/net/core/bpf_sk_storage.c
index da5639a5bd3b9..458be6b3eda97 100644
--- a/net/core/bpf_sk_storage.c
+++ b/net/core/bpf_sk_storage.c
@@ -798,7 +798,7 @@ int bpf_sk_storage_clone(const struct sock *sk, struct sock *newsk)
 		 * Try to grab map refcnt to make sure that it's still
 		 * alive and prevent concurrent removal.
 		 */
-		map = bpf_map_inc_not_zero(&smap->map, false);
+		map = bpf_map_inc_not_zero(&smap->map);
 		if (IS_ERR(map))
 			continue;
 
-- 
2.20.1

Re: [oss-drivers] [PATCH AUTOSEL 5.4 326/350] bpf: Switch bpf_map ref counter to atomic64_t so bpf_map_inc() never fails

[Jakub Kicinski]

On Tue, 10 Dec 2019 16:07:11 -0500, Sasha Levin wrote:
> From: Andrii Nakryiko <andriin@fb.com>
> 
> [ Upstream commit 1e0bd5a091e5d9e0f1d5b0e6329b87bb1792f784 ]
> 
> 92117d8443bc ("bpf: fix refcnt overflow") turned refcounting of bpf_map into
> potentially failing operation, when refcount reaches BPF_MAX_REFCNT limit
> (32k). Due to using 32-bit counter, it's possible in practice to overflow
> refcounter and make it wrap around to 0, causing erroneous map free, while
> there are still references to it, causing use-after-free problems.

I don't think this is a bug fix, the second sentence here is written
in a quite confusing way, but there is no bug.

Could you drop? I don't think it's worth the backporting pain since it
changes bpf_map_inc().

Re: [oss-drivers] [PATCH AUTOSEL 5.4 326/350] bpf: Switch bpf_map ref counter to atomic64_t so bpf_map_inc() never fails

[Daniel Borkmann]

On Tue, Dec 10, 2019 at 01:28:34PM -0800, Jakub Kicinski wrote:
> On Tue, 10 Dec 2019 16:07:11 -0500, Sasha Levin wrote:
> > From: Andrii Nakryiko <andriin@fb.com>
> > 
> > [ Upstream commit 1e0bd5a091e5d9e0f1d5b0e6329b87bb1792f784 ]
> > 
> > 92117d8443bc ("bpf: fix refcnt overflow") turned refcounting of bpf_map into
> > potentially failing operation, when refcount reaches BPF_MAX_REFCNT limit
> > (32k). Due to using 32-bit counter, it's possible in practice to overflow
> > refcounter and make it wrap around to 0, causing erroneous map free, while
> > there are still references to it, causing use-after-free problems.
> 
> I don't think this is a bug fix, the second sentence here is written
> in a quite confusing way, but there is no bug.
> 
> Could you drop? I don't think it's worth the backporting pain since it
> changes bpf_map_inc().

Agree, this is not a bug fix and should not go to stable. (Also agree that
the changelog is super confusing here and should have been done differently
to avoid exactly where we are here. I think I pointed that out in the
original patch, but seems this slipped through the cracks :/)

Thanks,
Daniel

Re: [oss-drivers] [PATCH AUTOSEL 5.4 326/350] bpf: Switch bpf_map ref counter to atomic64_t so bpf_map_inc() never fails

[Sasha Levin]

On Thu, Dec 12, 2019 at 05:25:13PM +0100, Daniel Borkmann wrote:
>On Tue, Dec 10, 2019 at 01:28:34PM -0800, Jakub Kicinski wrote:
>> On Tue, 10 Dec 2019 16:07:11 -0500, Sasha Levin wrote:
>> > From: Andrii Nakryiko <andriin@fb.com>
>> >
>> > [ Upstream commit 1e0bd5a091e5d9e0f1d5b0e6329b87bb1792f784 ]
>> >
>> > 92117d8443bc ("bpf: fix refcnt overflow") turned refcounting of bpf_map into
>> > potentially failing operation, when refcount reaches BPF_MAX_REFCNT limit
>> > (32k). Due to using 32-bit counter, it's possible in practice to overflow
>> > refcounter and make it wrap around to 0, causing erroneous map free, while
>> > there are still references to it, causing use-after-free problems.
>>
>> I don't think this is a bug fix, the second sentence here is written
>> in a quite confusing way, but there is no bug.
>>
>> Could you drop? I don't think it's worth the backporting pain since it
>> changes bpf_map_inc().
>
>Agree, this is not a bug fix and should not go to stable. (Also agree that
>the changelog is super confusing here and should have been done differently
>to avoid exactly where we are here. I think I pointed that out in the
>original patch, but seems this slipped through the cracks :/)

Sure, dropped, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.4 327/350] libbpf: Fix call relocation offset calculation bug

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit a0d7da26ce86a25e97ae191cb90574ada6daea98 ]

When relocating subprogram call, libbpf doesn't take into account
relo->text_off, which comes from symbol's value. This generally works fine for
subprograms implemented as static functions, but breaks for global functions.

Taking a simplified test_pkt_access.c as an example:

__attribute__ ((noinline))
static int test_pkt_access_subprog1(volatile struct __sk_buff *skb)
{
        return skb->len * 2;
}

__attribute__ ((noinline))
static int test_pkt_access_subprog2(int val, volatile struct __sk_buff *skb)
{
        return skb->len + val;
}

SEC("classifier/test_pkt_access")
int test_pkt_access(struct __sk_buff *skb)
{
        if (test_pkt_access_subprog1(skb) != skb->len * 2)
                return TC_ACT_SHOT;
        if (test_pkt_access_subprog2(2, skb) != skb->len + 2)
                return TC_ACT_SHOT;
        return TC_ACT_UNSPEC;
}

When compiled, we get two relocations, pointing to '.text' symbol. .text has
st_value set to 0 (it points to the beginning of .text section):

0000000000000008  000000050000000a R_BPF_64_32            0000000000000000 .text
0000000000000040  000000050000000a R_BPF_64_32            0000000000000000 .text

test_pkt_access_subprog1 and test_pkt_access_subprog2 offsets (targets of two
calls) are encoded within call instruction's imm32 part as -1 and 2,
respectively:

0000000000000000 test_pkt_access_subprog1:
       0:       61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
       1:       64 00 00 00 01 00 00 00 w0 <<= 1
       2:       95 00 00 00 00 00 00 00 exit

0000000000000018 test_pkt_access_subprog2:
       3:       61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
       4:       04 00 00 00 02 00 00 00 w0 += 2
       5:       95 00 00 00 00 00 00 00 exit

0000000000000000 test_pkt_access:
       0:       bf 16 00 00 00 00 00 00 r6 = r1
===>   1:       85 10 00 00 ff ff ff ff call -1
       2:       bc 01 00 00 00 00 00 00 w1 = w0
       3:       b4 00 00 00 02 00 00 00 w0 = 2
       4:       61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
       5:       64 02 00 00 01 00 00 00 w2 <<= 1
       6:       5e 21 08 00 00 00 00 00 if w1 != w2 goto +8 <LBB0_3>
       7:       bf 61 00 00 00 00 00 00 r1 = r6
===>   8:       85 10 00 00 02 00 00 00 call 2
       9:       bc 01 00 00 00 00 00 00 w1 = w0
      10:       61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
      11:       04 02 00 00 02 00 00 00 w2 += 2
      12:       b4 00 00 00 ff ff ff ff w0 = -1
      13:       1e 21 01 00 00 00 00 00 if w1 == w2 goto +1 <LBB0_3>
      14:       b4 00 00 00 02 00 00 00 w0 = 2
0000000000000078 LBB0_3:
      15:       95 00 00 00 00 00 00 00 exit

Now, if we compile example with global functions, the setup changes.
Relocations are now against specifically test_pkt_access_subprog1 and
test_pkt_access_subprog2 symbols, with test_pkt_access_subprog2 pointing 24
bytes into its respective section (.text), i.e., 3 instructions in:

0000000000000008  000000070000000a R_BPF_64_32            0000000000000000 test_pkt_access_subprog1
0000000000000048  000000080000000a R_BPF_64_32            0000000000000018 test_pkt_access_subprog2

Calls instructions now encode offsets relative to function symbols and are both
set ot -1:

0000000000000000 test_pkt_access_subprog1:
       0:       61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
       1:       64 00 00 00 01 00 00 00 w0 <<= 1
       2:       95 00 00 00 00 00 00 00 exit

0000000000000018 test_pkt_access_subprog2:
       3:       61 20 00 00 00 00 00 00 r0 = *(u32 *)(r2 + 0)
       4:       0c 10 00 00 00 00 00 00 w0 += w1
       5:       95 00 00 00 00 00 00 00 exit

0000000000000000 test_pkt_access:
       0:       bf 16 00 00 00 00 00 00 r6 = r1
===>   1:       85 10 00 00 ff ff ff ff call -1
       2:       bc 01 00 00 00 00 00 00 w1 = w0
       3:       b4 00 00 00 02 00 00 00 w0 = 2
       4:       61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
       5:       64 02 00 00 01 00 00 00 w2 <<= 1
       6:       5e 21 09 00 00 00 00 00 if w1 != w2 goto +9 <LBB2_3>
       7:       b4 01 00 00 02 00 00 00 w1 = 2
       8:       bf 62 00 00 00 00 00 00 r2 = r6
===>   9:       85 10 00 00 ff ff ff ff call -1
      10:       bc 01 00 00 00 00 00 00 w1 = w0
      11:       61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
      12:       04 02 00 00 02 00 00 00 w2 += 2
      13:       b4 00 00 00 ff ff ff ff w0 = -1
      14:       1e 21 01 00 00 00 00 00 if w1 == w2 goto +1 <LBB2_3>
      15:       b4 00 00 00 02 00 00 00 w0 = 2
0000000000000080 LBB2_3:
      16:       95 00 00 00 00 00 00 00 exit

Thus the right formula to calculate target call offset after relocation should
take into account relocation's target symbol value (offset within section),
call instruction's imm32 offset, and (subtracting, to get relative instruction
offset) instruction index of call instruction itself. All that is shifted by
number of instructions in main program, given all sub-programs are copied over
after main program.

Convert few selftests relying on bpf-to-bpf calls to use global functions
instead of static ones.

Fixes: 48cca7e44f9f ("libbpf: add support for bpf_call")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191119224447.3781271-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c                             | 8 ++++++--
 tools/testing/selftests/bpf/progs/test_btf_haskv.c | 4 ++--
 tools/testing/selftests/bpf/progs/test_btf_newkv.c | 4 ++--
 tools/testing/selftests/bpf/progs/test_btf_nokv.c  | 4 ++--
 4 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index a267cd0c0ce28..6a87ff9936d7b 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -1791,9 +1791,13 @@ bpf_program__collect_reloc(struct bpf_program *prog, GElf_Shdr *shdr,
 				pr_warning("incorrect bpf_call opcode\n");
 				return -LIBBPF_ERRNO__RELOC;
 			}
+			if (sym.st_value % 8) {
+				pr_warn("bad call relo offset: %lu\n", sym.st_value);
+				return -LIBBPF_ERRNO__RELOC;
+			}
 			prog->reloc_desc[i].type = RELO_CALL;
 			prog->reloc_desc[i].insn_idx = insn_idx;
-			prog->reloc_desc[i].text_off = sym.st_value;
+			prog->reloc_desc[i].text_off = sym.st_value / 8;
 			obj->has_pseudo_calls = true;
 			continue;
 		}
@@ -3239,7 +3243,7 @@ bpf_program__reloc_text(struct bpf_program *prog, struct bpf_object *obj,
 			 prog->section_name);
 	}
 	insn = &prog->insns[relo->insn_idx];
-	insn->imm += prog->main_prog_cnt - relo->insn_idx;
+	insn->imm += relo->text_off + prog->main_prog_cnt - relo->insn_idx;
 	return 0;
 }
 
diff --git a/tools/testing/selftests/bpf/progs/test_btf_haskv.c b/tools/testing/selftests/bpf/progs/test_btf_haskv.c
index e5c79fe0ffdb2..d65c61e64df2f 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_haskv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_haskv.c
@@ -25,7 +25,7 @@ struct dummy_tracepoint_args {
 };
 
 __attribute__((noinline))
-static int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(struct dummy_tracepoint_args *arg)
 {
 	struct ipv_counts *counts;
 	int key = 0;
@@ -43,7 +43,7 @@ static int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-static int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(struct dummy_tracepoint_args *arg)
 {
 	return test_long_fname_2(arg);
 }
diff --git a/tools/testing/selftests/bpf/progs/test_btf_newkv.c b/tools/testing/selftests/bpf/progs/test_btf_newkv.c
index 5ee3622ddebb6..8e83317db841f 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_newkv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_newkv.c
@@ -33,7 +33,7 @@ struct dummy_tracepoint_args {
 };
 
 __attribute__((noinline))
-static int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(struct dummy_tracepoint_args *arg)
 {
 	struct ipv_counts *counts;
 	int key = 0;
@@ -56,7 +56,7 @@ static int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-static int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(struct dummy_tracepoint_args *arg)
 {
 	return test_long_fname_2(arg);
 }
diff --git a/tools/testing/selftests/bpf/progs/test_btf_nokv.c b/tools/testing/selftests/bpf/progs/test_btf_nokv.c
index 434188c377743..3f44220447594 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_nokv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_nokv.c
@@ -23,7 +23,7 @@ struct dummy_tracepoint_args {
 };
 
 __attribute__((noinline))
-static int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(struct dummy_tracepoint_args *arg)
 {
 	struct ipv_counts *counts;
 	int key = 0;
@@ -41,7 +41,7 @@ static int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-static int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(struct dummy_tracepoint_args *arg)
 {
 	return test_long_fname_2(arg);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.4 343/350] tools, bpf: Fix build for 'make -s tools/bpf O=<dir>'

[Sasha Levin]

From: Quentin Monnet <quentin.monnet@netronome.com>

[ Upstream commit a89b2cbf71d64b61e79bbe5cb7ff4664797eeaaf ]

Building selftests with 'make TARGETS=bpf kselftest' was fixed in commit
55d554f5d140 ("tools: bpf: Use !building_out_of_srctree to determine
srctree"). However, by updating $(srctree) in tools/bpf/Makefile for
in-tree builds only, we leave out the case where we pass an output
directory to build BPF tools, but $(srctree) is not set. This
typically happens for:

    $ make -s tools/bpf O=/tmp/foo
    Makefile:40: /tools/build/Makefile.feature: No such file or directory

Fix it by updating $(srctree) in the Makefile not only for out-of-tree
builds, but also if $(srctree) is empty.

Detected with test_bpftool_build.sh.

Fixes: 55d554f5d140 ("tools: bpf: Use !building_out_of_srctree to determine srctree")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191119105626.21453-1-quentin.monnet@netronome.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/Makefile | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/tools/bpf/Makefile b/tools/bpf/Makefile
index 5d1995fd369c6..5535650800ab2 100644
--- a/tools/bpf/Makefile
+++ b/tools/bpf/Makefile
@@ -16,7 +16,13 @@ CFLAGS += -D__EXPORTED_HEADERS__ -I$(srctree)/include/uapi -I$(srctree)/include
 # isn't set and when invoked from selftests build, where srctree
 # is set to ".". building_out_of_srctree is undefined for in srctree
 # builds
+ifeq ($(srctree),)
+update_srctree := 1
+endif
 ifndef building_out_of_srctree
+update_srctree := 1
+endif
+ifeq ($(update_srctree),1)
 srctree := $(patsubst %/,%,$(dir $(CURDIR)))
 srctree := $(patsubst %/,%,$(dir $(srctree)))
 endif
-- 
2.20.1

[PATCH AUTOSEL 5.4 346/350] bpf: Provide better register bounds after jmp32 instructions

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 581738a681b6faae5725c2555439189ca81c0f1f ]

With latest llvm (trunk https://github.com/llvm/llvm-project),
test_progs, which has +alu32 enabled, failed for strobemeta.o.
The verifier output looks like below with edit to replace large
decimal numbers with hex ones.
 193: (85) call bpf_probe_read_user_str#114
   R0=inv(id=0)
 194: (26) if w0 > 0x1 goto pc+4
   R0_w=inv(id=0,umax_value=0xffffffff00000001)
 195: (6b) *(u16 *)(r7 +80) = r0
 196: (bc) w6 = w0
   R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
 197: (67) r6 <<= 32
   R6_w=inv(id=0,smax_value=0x7fffffff00000000,umax_value=0xffffffff00000000,
            var_off=(0x0; 0xffffffff00000000))
 198: (77) r6 >>= 32
   R6=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
 ...
 201: (79) r8 = *(u64 *)(r10 -416)
   R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0)
 202: (0f) r8 += r6
   R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
 203: (07) r8 += 9696
   R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
 ...
 255: (bf) r1 = r8
   R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
 ...
 257: (85) call bpf_probe_read_user_str#114
 R1 unbounded memory access, make sure to bounds check any array access into a map

The value range for register r6 at insn 198 should be really just 0/1.
The umax_value=0xffffffff caused later verification failure.

After jmp instructions, the current verifier already tried to use just
obtained information to get better register range. The current mechanism is
for 64bit register only. This patch implemented to tighten the range
for 32bit sub-registers after jmp32 instructions.
With the patch, we have the below range ranges for the
above code sequence:
 193: (85) call bpf_probe_read_user_str#114
   R0=inv(id=0)
 194: (26) if w0 > 0x1 goto pc+4
   R0_w=inv(id=0,smax_value=0x7fffffff00000001,umax_value=0xffffffff00000001,
            var_off=(0x0; 0xffffffff00000001))
 195: (6b) *(u16 *)(r7 +80) = r0
 196: (bc) w6 = w0
   R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0x1))
 197: (67) r6 <<= 32
   R6_w=inv(id=0,umax_value=0x100000000,var_off=(0x0; 0x100000000))
 198: (77) r6 >>= 32
   R6=inv(id=0,umax_value=1,var_off=(0x0; 0x1))
 ...
 201: (79) r8 = *(u64 *)(r10 -416)
   R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0)
 202: (0f) r8 += r6
   R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
 203: (07) r8 += 9696
   R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
 ...
 255: (bf) r1 = r8
   R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
 ...
 257: (85) call bpf_probe_read_user_str#114
 ...

At insn 194, the register R0 has better var_off.mask and smax_value.
Especially, the var_off.mask ensures later lshift and rshift
maintains proper value range.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191121170650.449030-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 87181cd5bafd7..df033c5877cbe 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -978,6 +978,17 @@ static void __reg_bound_offset(struct bpf_reg_state *reg)
 						 reg->umax_value));
 }
 
+static void __reg_bound_offset32(struct bpf_reg_state *reg)
+{
+	u64 mask = 0xffffFFFF;
+	struct tnum range = tnum_range(reg->umin_value & mask,
+				       reg->umax_value & mask);
+	struct tnum lo32 = tnum_cast(reg->var_off, 4);
+	struct tnum hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32);
+
+	reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range));
+}
+
 /* Reset the min/max bounds of a register */
 static void __mark_reg_unbounded(struct bpf_reg_state *reg)
 {
@@ -5433,6 +5444,10 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg,
 	/* We might have learned some bits from the bounds. */
 	__reg_bound_offset(false_reg);
 	__reg_bound_offset(true_reg);
+	if (is_jmp32) {
+		__reg_bound_offset32(false_reg);
+		__reg_bound_offset32(true_reg);
+	}
 	/* Intersecting with the old var_off might have improved our bounds
 	 * slightly.  e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
 	 * then new var_off is (0; 0x7f...fc) which improves our umax.
@@ -5542,6 +5557,10 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg,
 	/* We might have learned some bits from the bounds. */
 	__reg_bound_offset(false_reg);
 	__reg_bound_offset(true_reg);
+	if (is_jmp32) {
+		__reg_bound_offset32(false_reg);
+		__reg_bound_offset32(true_reg);
+	}
 	/* Intersecting with the old var_off might have improved our bounds
 	 * slightly.  e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
 	 * then new var_off is (0; 0x7f...fc) which improves our umax.
-- 
2.20.1