bpf.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
To: "Toke Høiland-Jørgensen" <toke@redhat.com>
Cc: "Björn Töpel" <bjorn.topel@intel.com>,
	daniel@iogearbox.net, ast@kernel.org, bpf@vger.kernel.org,
	netdev@vger.kernel.org, andrii@kernel.org,
	magnus.karlsson@intel.com, ciara.loftus@intel.com
Subject: Re: [PATCH bpf-next 1/3] libbpf: xsk: use bpf_link
Date: Tue, 16 Feb 2021 03:01:28 +0100	[thread overview]
Message-ID: <20210216020128.GA9572@ranger.igk.intel.com> (raw)
In-Reply-To: <875z2tcef2.fsf@toke.dk>

On Mon, Feb 15, 2021 at 08:35:29PM +0100, Toke Høiland-Jørgensen wrote:
> Björn Töpel <bjorn.topel@intel.com> writes:
> 
> > On 2021-02-15 18:07, Toke Høiland-Jørgensen wrote:
> >> Maciej Fijalkowski <maciej.fijalkowski@intel.com> writes:
> >> 
> >>> Currently, if there are multiple xdpsock instances running on a single
> >>> interface and in case one of the instances is terminated, the rest of
> >>> them are left in an inoperable state due to the fact of unloaded XDP
> >>> prog from interface.
> >>>
> >>> To address that, step away from setting bpf prog in favour of bpf_link.
> >>> This means that refcounting of BPF resources will be done automatically
> >>> by bpf_link itself.
> >>>
> >>> When setting up BPF resources during xsk socket creation, check whether
> >>> bpf_link for a given ifindex already exists via set of calls to
> >>> bpf_link_get_next_id -> bpf_link_get_fd_by_id -> bpf_obj_get_info_by_fd
> >>> and comparing the ifindexes from bpf_link and xsk socket.
> >> 
> >> One consideration here is that bpf_link_get_fd_by_id() is a privileged
> >> operation (privileged as in CAP_SYS_ADMIN), so this has the side effect
> >> of making AF_XDP privileged as well. Is that the intention?
> >>
> >
> > We're already using, e.g., bpf_map_get_fd_by_id() which has that
> > as well. So we're assuming that for XDP setup already!
> 
> Ah, right, didn't realise that one is CAP_SYS_ADMIN as well; I
> remembered this as being specific to the bpf_link operation.
> 
> >> Another is that the AF_XDP code is in the process of moving to libxdp
> >> (see in-progress PR [0]), and this approach won't carry over as-is to
> >> that model, because libxdp has to pin the bpf_link fds.
> >>
> >
> > I was assuming there were two modes of operations for AF_XDP in libxdp.
> > One which is with the multi-program support (which AFAIK is why the
> > pinning is required), and one "like the current libbpf" one. For the
> > latter Maciej's series would be a good fit, no?
> 
> We haven't added an explicit mode switch for now; libxdp will fall back
> to regular interface attach if the kernel doesn't support the needed
> features for multi-attach, but if it's possible to just have libxdp
> transparently do the right thing I'd much prefer that. So we're still
> exploring that (part of which is that Magnus has promised to run some
> performance tests to see if there's a difference).
> 
> However, even if there's an explicit mode switch I'd like to avoid
> different *semantics* between the two modes if possible, to keep the two
> as compatible as possible. And since we can't currently do "auto-detach
> on bpf_link fd close" when using multi-prog, introducing this now would
> lead to just such a semantic difference. So my preference would be to do
> it differently... :)
> 
> >> However, in libxdp we can solve the original problem in a different way,
> >> and in fact I already suggested to Magnus that we should do this (see
> >> [1]); so one way forward could be to address it during the merge in
> >> libxdp? It should be possible to address the original issue (two
> >> instances of xdpsock breaking each other when they exit), but
> >> applications will still need to do an explicit unload operation before
> >> exiting (i.e., the automatic detach on bpf_link fd closure will take
> >> more work, and likely require extending the bpf_link kernel support)...
> >>
> >
> > I'd say it's depending on the libbpf 1.0/libxdp merge timeframe. If
> > we're months ahead, then I'd really like to see this in libbpf until the
> > merge. However, I'll leave that for Magnus/you to decide!

WDYM by libbpf 1.0/libxdp merge? I glanced through thread and I saw that
John was also not aware of that. Not sure where it was discussed?

If you're saying 'merge', then is libxdp going to be a part of kernel or
as an AF-XDP related guy I would be forced to include yet another
repository in the BPF developer toolchain? :<

> 
> Well, as far as libxdp support goes, the PR I linked is pretty close to
> being mergeable. One of the few outstanding issues is whether we should
> solve just this issue before merging, actually :)
> 
> Not sure exactly which timeframe Andrii is envisioning for libbpf 1.0,
> but last I heard he'll announce something next week.
> 
> > Bottom line; I'd *really* like bpf_link behavior (process scoped) for
> > AF_XDP sooner than later! ;-)
> 
> Totally agree that we should solve the multi-process coexistence
> problem! And as I said, I think we can do so in libxdp by using the same
> synchronisation mechanism we use for setting up the multi-prog
> dispatcher. So it doesn't *have* to hold things up :)

Am I reading this right or you're trying to reject the fix of the long
standing issue due to a PR that is not ready yet on a standalone
project/library? :P

Once libxdp is the standard way of playing with AF-XDP and there are
actual users of that, then I'm happy to work/help on that issue.

Spawning a few xdpsock instances on the same interface has been a
standard/easiest way of measuring the scalability of AF-XDP ZC
implementations. This has been a real PITA for quite a long time. So, I
second Bjorn's statement - the sooner we have this fixed, the better.

Thanks! I hope I haven't sounded harsh, not my intent at all,
Maciej

> 
> -Toke
> 

  reply	other threads:[~2021-02-16  2:12 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-15 15:46 [PATCH bpf-next 0/3] Introduce bpf_link in libbpf's xsk Maciej Fijalkowski
2021-02-15 15:46 ` [PATCH bpf-next 1/3] libbpf: xsk: use bpf_link Maciej Fijalkowski
2021-02-15 17:07   ` Toke Høiland-Jørgensen
2021-02-15 17:38     ` Björn Töpel
2021-02-15 19:35       ` Toke Høiland-Jørgensen
2021-02-16  2:01         ` Maciej Fijalkowski [this message]
2021-02-16  9:15           ` Björn Töpel
2021-02-16 10:27           ` Toke Høiland-Jørgensen
2021-02-16 20:15             ` Maciej Fijalkowski
2021-02-15 20:22       ` John Fastabend
2021-02-15 21:38         ` Toke Høiland-Jørgensen
2021-02-16  0:18           ` John Fastabend
2021-02-16  2:23             ` Maciej Fijalkowski
2021-02-16  9:23               ` Björn Töpel
2021-02-16 10:36             ` Toke Høiland-Jørgensen
2021-02-23  1:15               ` Andrii Nakryiko
2021-02-17  2:23           ` Dan Siemon
2021-02-17  7:16             ` Magnus Karlsson
2021-02-17  7:36               ` Magnus Karlsson
2021-02-16  2:10         ` Maciej Fijalkowski
2021-02-15 20:49   ` John Fastabend
2021-02-16  2:38     ` Maciej Fijalkowski
2021-02-16 18:19       ` John Fastabend
2021-02-16 20:10         ` Maciej Fijalkowski
2021-02-16  9:20     ` Björn Töpel
2021-02-16 10:39       ` Toke Høiland-Jørgensen
2021-02-16 19:15         ` John Fastabend
2021-02-16 20:50           ` Maciej Fijalkowski
2021-02-16 21:17             ` John Fastabend
2021-02-15 15:46 ` [PATCH bpf-next 2/3] libbpf: clear map_info before each bpf_obj_get_info_by_fd Maciej Fijalkowski
2021-02-15 20:33   ` John Fastabend
2021-02-16  2:42     ` Maciej Fijalkowski
2021-02-15 15:46 ` [PATCH bpf-next 3/3] samples: bpf: do not unload prog within xdpsock Maciej Fijalkowski
2021-02-15 20:24   ` John Fastabend
2021-02-16  9:22     ` Björn Töpel
2021-02-16 14:15       ` Maciej Fijalkowski
2021-02-15 16:07 ` [PATCH bpf-next 0/3] Introduce bpf_link in libbpf's xsk Björn Töpel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210216020128.GA9572@ranger.igk.intel.com \
    --to=maciej.fijalkowski@intel.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bjorn.topel@intel.com \
    --cc=bpf@vger.kernel.org \
    --cc=ciara.loftus@intel.com \
    --cc=daniel@iogearbox.net \
    --cc=magnus.karlsson@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=toke@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).