* [PATCH bpf-next 1/2] samples: bpf: convert route table network order fields into readable format
@ 2021-09-19 8:03 Gokul Sivakumar
2021-09-19 8:03 ` [PATCH bpf-next 2/2] samples: bpf: convert ARP " Gokul Sivakumar
0 siblings, 1 reply; 2+ messages in thread
From: Gokul Sivakumar @ 2021-09-19 8:03 UTC (permalink / raw)
To: bpf; +Cc: Gokul Sivakumar, netdev
The route table that is dumped when the xdp_router_ipv4 process is launched
has the "Gateway" field in non-readable network byte order format, also the
alignment is off when printing the table.
Destination Gateway Genmask Metric Iface
0.0.0.0 196a8c0 0 0 enp7s0
0.0.0.0 196a8c0 0 0 wlp6s0
169.254.0.0 196a8c0 16 0 enp7s0
172.17.0.0 0 16 0 docker0
192.168.150.0 0 24 0 enp7s0
192.168.150.0 0 24 0 wlp6s0
Fix this by converting the "Gateway" field from network byte order Hex into
dotted decimal notation IPv4 format and "Genmask" from CIDR notation into
dotted decimal notation IPv4 format. Also fix the aligntment of the fields
in the route table.
Destination Gateway Genmask Metric Iface
0.0.0.0 192.168.150.1 0.0.0.0 0 enp7s0
0.0.0.0 192.168.150.1 0.0.0.0 0 wlp6s0
169.254.0.0 192.168.150.1 255.255.0.0 0 enp7s0
172.17.0.0 0.0.0.0 255.255.0.0 0 docker0
192.168.150.0 0.0.0.0 255.255.255.0 0 enp7s0
192.168.150.0 0.0.0.0 255.255.255.0 0 wlp6s0
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
---
samples/bpf/xdp_router_ipv4_user.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/samples/bpf/xdp_router_ipv4_user.c b/samples/bpf/xdp_router_ipv4_user.c
index b5f03cb17a3c..3e9db5a8c8c6 100644
--- a/samples/bpf/xdp_router_ipv4_user.c
+++ b/samples/bpf/xdp_router_ipv4_user.c
@@ -155,7 +155,7 @@ static void read_route(struct nlmsghdr *nh, int nll)
printf("%d\n", nh->nlmsg_type);
memset(&route, 0, sizeof(route));
- printf("Destination\t\tGateway\t\tGenmask\t\tMetric\t\tIface\n");
+ printf("Destination Gateway Genmask Metric Iface\n");
for (; NLMSG_OK(nh, nll); nh = NLMSG_NEXT(nh, nll)) {
rt_msg = (struct rtmsg *)NLMSG_DATA(nh);
rtm_family = rt_msg->rtm_family;
@@ -207,6 +207,7 @@ static void read_route(struct nlmsghdr *nh, int nll)
int metric;
__be32 gw;
} *prefix_value;
+ struct in_addr dst_addr, gw_addr, mask_addr;
prefix_key = alloca(sizeof(*prefix_key) + 3);
prefix_value = alloca(sizeof(*prefix_value));
@@ -234,14 +235,17 @@ static void read_route(struct nlmsghdr *nh, int nll)
for (i = 0; i < 4; i++)
prefix_key->data[i] = (route.dst >> i * 8) & 0xff;
- printf("%3d.%d.%d.%d\t\t%3x\t\t%d\t\t%d\t\t%s\n",
- (int)prefix_key->data[0],
- (int)prefix_key->data[1],
- (int)prefix_key->data[2],
- (int)prefix_key->data[3],
- route.gw, route.dst_len,
+ dst_addr.s_addr = route.dst;
+ printf("%-16s", inet_ntoa(dst_addr));
+
+ gw_addr.s_addr = route.gw;
+ printf("%-16s", inet_ntoa(gw_addr));
+
+ mask_addr.s_addr = htonl(~(0xffffffffU >> route.dst_len));
+ printf("%-16s%-7d%s\n", inet_ntoa(mask_addr),
route.metric,
route.iface_name);
+
if (bpf_map_lookup_elem(lpm_map_fd, prefix_key,
prefix_value) < 0) {
for (i = 0; i < 4; i++)
@@ -672,7 +676,7 @@ int main(int ac, char **argv)
if (bpf_prog_load_xattr(&prog_load_attr, &obj, &prog_fd))
return 1;
- printf("\n**************loading bpf file*********************\n\n\n");
+ printf("\n******************loading bpf file*********************\n");
if (!prog_fd) {
printf("bpf_prog_load_xattr: %s\n", strerror(errno));
return 1;
@@ -722,7 +726,7 @@ int main(int ac, char **argv)
signal(SIGINT, int_exit);
signal(SIGTERM, int_exit);
- printf("*******************ROUTE TABLE*************************\n\n\n");
+ printf("\n*******************ROUTE TABLE*************************\n");
get_route_table(AF_INET);
printf("*******************ARP TABLE***************************\n\n\n");
get_arp_table(AF_INET);
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH bpf-next 2/2] samples: bpf: convert ARP table network order fields into readable format
2021-09-19 8:03 [PATCH bpf-next 1/2] samples: bpf: convert route table network order fields into readable format Gokul Sivakumar
@ 2021-09-19 8:03 ` Gokul Sivakumar
0 siblings, 0 replies; 2+ messages in thread
From: Gokul Sivakumar @ 2021-09-19 8:03 UTC (permalink / raw)
To: bpf; +Cc: Gokul Sivakumar, netdev
The ARP table that is dumped when the xdp_router_ipv4 process is launched
has the IP address & MAC address in non-readable network byte order format,
also the alignment is off when printing the table.
Address HwAddress
160000e0 1600005e0001
ff96a8c0 ffffffffffff
faffffef faff7f5e0001
196a8c0 9607871293ea
fb0000e0 fb00005e0001
0 0
196a8c0 9607871293ea
ffff11ac ffffffffffff
faffffef faff7f5e0001
fb0000e0 fb00005e0001
160000e0 1600005e0001
160000e0 1600005e0001
faffffef faff7f5e0001
fb0000e0 fb00005e0001
40011ac 40011ac4202
Fix this by converting the "Address" field from network byte order Hex into
dotted decimal notation IPv4 format and "HwAddress" field from network byte
order Hex into Colon separated Hex format. Also fix the aligntment of the
fields in the ARP table.
Address HwAddress
224.0.0.22 01:00:5e:00:00:16
192.168.150.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
192.168.150.1 ea:93:12:87:07:96
224.0.0.251 01:00:5e:00:00:fb
0.0.0.0 00:00:00:00:00:00
192.168.150.1 ea:93:12:87:07:96
172.17.255.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
224.0.0.22 01:00:5e:00:00:16
224.0.0.22 01:00:5e:00:00:16
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
172.17.0.4 02:42:ac:11:00:04
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
---
samples/bpf/xdp_router_ipv4_user.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/samples/bpf/xdp_router_ipv4_user.c b/samples/bpf/xdp_router_ipv4_user.c
index 3e9db5a8c8c6..cfaf7e50e431 100644
--- a/samples/bpf/xdp_router_ipv4_user.c
+++ b/samples/bpf/xdp_router_ipv4_user.c
@@ -397,8 +397,12 @@ static void read_arp(struct nlmsghdr *nh, int nll)
if (nh->nlmsg_type == RTM_GETNEIGH)
printf("READING arp entry\n");
- printf("Address\tHwAddress\n");
+ printf("Address HwAddress\n");
for (; NLMSG_OK(nh, nll); nh = NLMSG_NEXT(nh, nll)) {
+ struct in_addr dst_addr;
+ char mac_str[18];
+ int len = 0, i;
+
rt_msg = (struct ndmsg *)NLMSG_DATA(nh);
rt_attr = (struct rtattr *)RTM_RTA(rt_msg);
ndm_family = rt_msg->ndm_family;
@@ -419,7 +423,14 @@ static void read_arp(struct nlmsghdr *nh, int nll)
}
arp_entry.dst = atoi(dsts);
arp_entry.mac = atol(mac);
- printf("%x\t\t%llx\n", arp_entry.dst, arp_entry.mac);
+
+ dst_addr.s_addr = arp_entry.dst;
+ for (i = 0; i < 6; i++)
+ len += snprintf(mac_str + len, 18 - len, "%02llx%s",
+ ((arp_entry.mac >> i * 8) & 0xff),
+ i < 5 ? ":" : "");
+ printf("%-16s%s\n", inet_ntoa(dst_addr), mac_str);
+
if (ndm_family == AF_INET) {
if (bpf_map_lookup_elem(exact_match_map_fd,
&arp_entry.dst,
@@ -728,7 +739,7 @@ int main(int ac, char **argv)
printf("\n*******************ROUTE TABLE*************************\n");
get_route_table(AF_INET);
- printf("*******************ARP TABLE***************************\n\n\n");
+ printf("\n*******************ARP TABLE***************************\n");
get_arp_table(AF_INET);
if (monitor_route() < 0) {
printf("Error in receiving route update");
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-09-19 8:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-19 8:03 [PATCH bpf-next 1/2] samples: bpf: convert route table network order fields into readable format Gokul Sivakumar
2021-09-19 8:03 ` [PATCH bpf-next 2/2] samples: bpf: convert ARP " Gokul Sivakumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).