* [PATCH v4 1/6] arm64: dts: ti: k3-am65-mcu: Add Support for MCAN
2021-10-06 5:53 [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Aswath Govindraju
@ 2021-10-06 5:53 ` Aswath Govindraju
2021-10-06 5:53 ` [PATCH v4 2/6] arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes Aswath Govindraju
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Aswath Govindraju @ 2021-10-06 5:53 UTC (permalink / raw)
Cc: Marc Kleine-Budde, Aswath Govindraju, Faiz Abbas, Nishanth Menon,
Tero Kristo, Rob Herring, Alexei Starovoitov, Daniel Borkmann,
Andrii Nakryiko, Martin KaFai Lau, Song Liu, Yonghong Song,
John Fastabend, KP Singh, linux-arm-kernel, devicetree,
linux-kernel, netdev, bpf
From: Faiz Abbas <faiz_abbas@ti.com>
Add Support for two MCAN controllers present on the am65x SOC. Both support
classic CAN messages as well as CAN-FD.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 30 +++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index c93ff1520a0e..8d592bf41d6f 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -159,6 +159,36 @@
};
};
+ m_can0: mcan@40528000 {
+ compatible = "bosch,m_can";
+ reg = <0x0 0x40528000 0x0 0x400>,
+ <0x0 0x40500000 0x0 0x4400>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 102 5>, <&k3_clks 102 0>;
+ clock-names = "hclk", "cclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ m_can1: mcan@40568000 {
+ compatible = "bosch,m_can";
+ reg = <0x0 0x40568000 0x0 0x400>,
+ <0x0 0x40540000 0x0 0x4400>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 103 5>, <&k3_clks 103 0>;
+ clock-names = "hclk", "cclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
fss: fss@47000000 {
compatible = "simple-bus";
#address-cells = <2>;
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v4 2/6] arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes
2021-10-06 5:53 [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Aswath Govindraju
2021-10-06 5:53 ` [PATCH v4 1/6] arm64: dts: ti: k3-am65-mcu: Add Support for MCAN Aswath Govindraju
@ 2021-10-06 5:53 ` Aswath Govindraju
2021-10-07 7:31 ` Jan Kiszka
2021-10-06 5:53 ` [PATCH v4 3/6] arm64: dts: ti: k3-j721e: Add support for MCAN nodes Aswath Govindraju
` (4 subsequent siblings)
6 siblings, 1 reply; 9+ messages in thread
From: Aswath Govindraju @ 2021-10-06 5:53 UTC (permalink / raw)
Cc: Marc Kleine-Budde, Aswath Govindraju, Nishanth Menon,
Tero Kristo, Rob Herring, Alexei Starovoitov, Daniel Borkmann,
Andrii Nakryiko, Martin KaFai Lau, Song Liu, Yonghong Song,
John Fastabend, KP Singh, linux-arm-kernel, devicetree,
linux-kernel, netdev, bpf
AM654 base board and iot platforms do not have mcan instances pinned out.
Therefore, disable all the mcan instances.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 8 ++++++++
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 65da226847f4..1e0112b90d9f 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -646,6 +646,14 @@
reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
};
+&m_can0 {
+ status = "disabled";
+};
+
+&m_can1 {
+ status = "disabled";
+};
+
&pcie1_ep {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index cfbcebfa37c1..9043f91c9bec 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -416,6 +416,14 @@
status = "disabled";
};
+&m_can0 {
+ status = "disabled";
+};
+
+&m_can1 {
+ status = "disabled";
+};
+
&mailbox0_cluster0 {
interrupts = <436>;
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v4 2/6] arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes
2021-10-06 5:53 ` [PATCH v4 2/6] arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes Aswath Govindraju
@ 2021-10-07 7:31 ` Jan Kiszka
0 siblings, 0 replies; 9+ messages in thread
From: Jan Kiszka @ 2021-10-07 7:31 UTC (permalink / raw)
To: Aswath Govindraju
Cc: Marc Kleine-Budde, Nishanth Menon, Tero Kristo, Rob Herring,
Alexei Starovoitov, Daniel Borkmann, Andrii Nakryiko,
Martin KaFai Lau, Song Liu, Yonghong Song, John Fastabend,
KP Singh, linux-arm-kernel, devicetree, linux-kernel, netdev,
bpf
On 06.10.21 07:53, Aswath Govindraju wrote:
> AM654 base board and iot platforms do not have mcan instances pinned out.
> Therefore, disable all the mcan instances.
>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 8 ++++++++
> arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 ++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> index 65da226847f4..1e0112b90d9f 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> @@ -646,6 +646,14 @@
> reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
> };
>
> +&m_can0 {
> + status = "disabled";
> +};
> +
> +&m_can1 {
> + status = "disabled";
> +};
> +
> &pcie1_ep {
> status = "disabled";
> };
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index cfbcebfa37c1..9043f91c9bec 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -416,6 +416,14 @@
> status = "disabled";
> };
>
> +&m_can0 {
> + status = "disabled";
> +};
> +
> +&m_can1 {
> + status = "disabled";
> +};
> +
> &mailbox0_cluster0 {
> interrupts = <436>;
>
>
For the IOT2050 part:
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Jan
--
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 3/6] arm64: dts: ti: k3-j721e: Add support for MCAN nodes
2021-10-06 5:53 [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Aswath Govindraju
2021-10-06 5:53 ` [PATCH v4 1/6] arm64: dts: ti: k3-am65-mcu: Add Support for MCAN Aswath Govindraju
2021-10-06 5:53 ` [PATCH v4 2/6] arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes Aswath Govindraju
@ 2021-10-06 5:53 ` Aswath Govindraju
2021-10-06 5:53 ` [PATCH v4 4/6] arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes Aswath Govindraju
` (3 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Aswath Govindraju @ 2021-10-06 5:53 UTC (permalink / raw)
Cc: Marc Kleine-Budde, Aswath Govindraju, Faiz Abbas, Nishanth Menon,
Tero Kristo, Rob Herring, Alexei Starovoitov, Daniel Borkmann,
Andrii Nakryiko, Martin KaFai Lau, Song Liu, Yonghong Song,
John Fastabend, KP Singh, linux-arm-kernel, devicetree,
linux-kernel, netdev, bpf
From: Faiz Abbas <faiz_abbas@ti.com>
Add support for 14 MCAN controllers in main domain and 2 MCAN controllers
present in mcu domain. All the MCAN controllers support classic CAN
messages as well as CAN_FD messages.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 196 ++++++++++++++++++
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 28 +++
2 files changed, 224 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 08c8d1b47dcd..08a30c21e6b7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1940,4 +1940,200 @@
bus_freq = <1000000>;
};
};
+
+ main_mcan0: can@2701000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02701000 0x00 0x200>,
+ <0x00 0x02708000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 156 0>, <&k3_clks 156 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan1: can@2711000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02711000 0x00 0x200>,
+ <0x00 0x02718000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 158 0>, <&k3_clks 158 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan2: can@2721000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02721000 0x00 0x200>,
+ <0x00 0x02728000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 160 0>, <&k3_clks 160 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan3: can@2731000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02731000 0x00 0x200>,
+ <0x00 0x02738000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 161 0>, <&k3_clks 161 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan4: can@2741000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02741000 0x00 0x200>,
+ <0x00 0x02748000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 162 0>, <&k3_clks 162 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan5: can@2751000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02751000 0x00 0x200>,
+ <0x00 0x02758000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 163 0>, <&k3_clks 163 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan6: can@2761000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02761000 0x00 0x200>,
+ <0x00 0x02768000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 164 0>, <&k3_clks 164 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan7: can@2771000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02771000 0x00 0x200>,
+ <0x00 0x02778000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 165 0>, <&k3_clks 165 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan8: can@2781000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02781000 0x00 0x200>,
+ <0x00 0x02788000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 166 0>, <&k3_clks 166 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan9: can@2791000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02791000 0x00 0x200>,
+ <0x00 0x02798000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 167 0>, <&k3_clks 167 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan10: can@27a1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x027a1000 0x00 0x200>,
+ <0x00 0x027a8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 168 0>, <&k3_clks 168 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan11: can@27b1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x027b1000 0x00 0x200>,
+ <0x00 0x027b8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 169 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 169 0>, <&k3_clks 169 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan12: can@27c1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x027c1000 0x00 0x200>,
+ <0x00 0x027c8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 170 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 170 0>, <&k3_clks 170 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan13: can@27d1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x027d1000 0x00 0x200>,
+ <0x00 0x027d8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 171 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 171 0>, <&k3_clks 171 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index d2dceda72fe9..b4972dfb7da8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -390,4 +390,32 @@
ti,loczrama = <1>;
};
};
+
+ mcu_mcan0: can@40528000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x40528000 0x00 0x200>,
+ <0x00 0x40500000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 172 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 172 0>, <&k3_clks 172 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ mcu_mcan1: can@40568000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x40568000 0x00 0x200>,
+ <0x00 0x40540000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 173 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 173 0>, <&k3_clks 173 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
};
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v4 4/6] arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes
2021-10-06 5:53 [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Aswath Govindraju
` (2 preceding siblings ...)
2021-10-06 5:53 ` [PATCH v4 3/6] arm64: dts: ti: k3-j721e: Add support for MCAN nodes Aswath Govindraju
@ 2021-10-06 5:53 ` Aswath Govindraju
2021-10-06 5:53 ` [PATCH v4 5/6] arm64: dts: ti: k3-am64-main: Add support for MCAN Aswath Govindraju
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Aswath Govindraju @ 2021-10-06 5:53 UTC (permalink / raw)
Cc: Marc Kleine-Budde, Aswath Govindraju, Faiz Abbas, Nishanth Menon,
Tero Kristo, Rob Herring, Alexei Starovoitov, Daniel Borkmann,
Andrii Nakryiko, Martin KaFai Lau, Song Liu, Yonghong Song,
John Fastabend, KP Singh, linux-arm-kernel, devicetree,
linux-kernel, netdev, bpf
From: Faiz Abbas <faiz_abbas@ti.com>
Add four MCAN nodes present on the common processor board and set a
maximum data rate of 5 Mbps. Disable all other nodes as they
are not brought out on the common processor board.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
.../dts/ti/k3-j721e-common-proc-board.dts | 155 ++++++++++++++++++
1 file changed, 155 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index dc2bc67f9f48..2d7596911b27 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -112,6 +112,42 @@
"cpb-codec-scki",
"cpb-codec-scki-48000", "cpb-codec-scki-44100";
};
+
+ transceiver1: can-phy0 {
+ compatible = "ti,tcan1043";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+ standby-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver2: can-phy1 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+ standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver3: can-phy2 {
+ compatible = "ti,tcan1043";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver4: can-phy3 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan2_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>;
+ };
};
&main_pmx0 {
@@ -207,6 +243,26 @@
J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
>;
};
+
+ main_mcan0_pins_default: main-mcan0-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
+ J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
+ >;
+ };
+
+ main_mcan2_pins_default: main-mcan2-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */
+ J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */
+ >;
+ };
+
+ main_mcan2_gpio_pins_default: main-mcan2-gpio-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
+ >;
+ };
};
&wkup_pmx0 {
@@ -252,6 +308,33 @@
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
>;
};
+
+ mcu_mcan0_pins_default: mcu-mcan0-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
+ J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
+ >;
+ };
+
+ mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */
+ J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */
+ >;
+ };
+
+ mcu_mcan1_pins_default: mcu-mcan1-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */
+ J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */
+ >;
+ };
+
+ mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */
+ >;
+ };
};
&wkup_uart0 {
@@ -773,3 +856,75 @@
&icssg1_mdio {
status = "disabled";
};
+
+&mcu_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_pins_default>;
+ phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan1_pins_default>;
+ phys = <&transceiver2>;
+};
+
+&main_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_pins_default>;
+ phys = <&transceiver3>;
+};
+
+&main_mcan1 {
+ status = "disabled";
+};
+
+&main_mcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan2_pins_default>;
+ phys = <&transceiver4>;
+};
+
+&main_mcan3 {
+ status = "disabled";
+};
+
+&main_mcan4 {
+ status = "disabled";
+};
+
+&main_mcan5 {
+ status = "disabled";
+};
+
+&main_mcan6 {
+ status = "disabled";
+};
+
+&main_mcan7 {
+ status = "disabled";
+};
+
+&main_mcan8 {
+ status = "disabled";
+};
+
+&main_mcan9 {
+ status = "disabled";
+};
+
+&main_mcan10 {
+ status = "disabled";
+};
+
+&main_mcan11 {
+ status = "disabled";
+};
+
+&main_mcan12 {
+ status = "disabled";
+};
+
+&main_mcan13 {
+ status = "disabled";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v4 5/6] arm64: dts: ti: k3-am64-main: Add support for MCAN
2021-10-06 5:53 [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Aswath Govindraju
` (3 preceding siblings ...)
2021-10-06 5:53 ` [PATCH v4 4/6] arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes Aswath Govindraju
@ 2021-10-06 5:53 ` Aswath Govindraju
2021-10-06 5:53 ` [PATCH v4 6/6] arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK Aswath Govindraju
2021-10-18 12:47 ` [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Marc Kleine-Budde
6 siblings, 0 replies; 9+ messages in thread
From: Aswath Govindraju @ 2021-10-06 5:53 UTC (permalink / raw)
Cc: Marc Kleine-Budde, Aswath Govindraju, Nishanth Menon,
Tero Kristo, Rob Herring, Alexei Starovoitov, Daniel Borkmann,
Andrii Nakryiko, Martin KaFai Lau, Song Liu, Yonghong Song,
John Fastabend, KP Singh, linux-arm-kernel, devicetree,
linux-kernel, netdev, bpf
Add Support for two MCAN controllers present on the am64x SOC. Both support
classic CAN messages as well as CAN-FD.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 28 ++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 5ad638b95ffc..07cadbfcc436 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1253,4 +1253,32 @@
bus_freq = <1000000>;
};
};
+
+ main_mcan0: can@20701000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x20701000 0x00 0x200>,
+ <0x00 0x20708000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 98 5>, <&k3_clks 98 0>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
+
+ main_mcan1: can@20711000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x20711000 0x00 0x200>,
+ <0x00 0x20718000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 99 5>, <&k3_clks 99 0>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
};
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v4 6/6] arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK
2021-10-06 5:53 [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Aswath Govindraju
` (4 preceding siblings ...)
2021-10-06 5:53 ` [PATCH v4 5/6] arm64: dts: ti: k3-am64-main: Add support for MCAN Aswath Govindraju
@ 2021-10-06 5:53 ` Aswath Govindraju
2021-10-18 12:47 ` [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Marc Kleine-Budde
6 siblings, 0 replies; 9+ messages in thread
From: Aswath Govindraju @ 2021-10-06 5:53 UTC (permalink / raw)
Cc: Marc Kleine-Budde, Aswath Govindraju, Nishanth Menon,
Tero Kristo, Rob Herring, Alexei Starovoitov, Daniel Borkmann,
Andrii Nakryiko, Martin KaFai Lau, Song Liu, Yonghong Song,
John Fastabend, KP Singh, linux-arm-kernel, devicetree,
linux-kernel, netdev, bpf
AM642 EVM has two CAN connecters brought out from the two MCAN instances in
the main domain through transceivers. Add device tree nodes for
transceivers and set the required properties in the mcan device tree nodes,
in EVM device tree file.
On AM642 SK there are no connectors brought out for CAN. Therefore, disable
the mcan device tree nodes in the SK device tree file.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 40 +++++++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 8 +++++
2 files changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 6726c4c7c28c..e94ae178b1ae 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -184,6 +184,20 @@
};
};
};
+
+ transceiver1: can-phy0 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver2: can-phy1 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>;
+ };
};
&main_pmx0 {
@@ -294,6 +308,20 @@
AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
>;
};
+
+ main_mcan0_pins_default: main-mcan0-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */
+ AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */
+ >;
+ };
+
+ main_mcan1_pins_default: main-mcan1-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */
+ AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
+ >;
+ };
};
&main_uart0 {
@@ -638,3 +666,15 @@
&icssg1_mdio {
status = "disabled";
};
+
+&main_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_pins_default>;
+ phys = <&transceiver1>;
+};
+
+&main_mcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan1_pins_default>;
+ phys = <&transceiver2>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 6b04745147be..a9785bec12df 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -525,3 +525,11 @@
&icssg1_mdio {
status = "disabled";
};
+
+&main_mcan0 {
+ status = "disabled";
+};
+
+&main_mcan1 {
+ status = "disabled";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64
2021-10-06 5:53 [PATCH v4 0/6] CAN: Add support for CAN in AM65,J721e and AM64 Aswath Govindraju
` (5 preceding siblings ...)
2021-10-06 5:53 ` [PATCH v4 6/6] arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK Aswath Govindraju
@ 2021-10-18 12:47 ` Marc Kleine-Budde
6 siblings, 0 replies; 9+ messages in thread
From: Marc Kleine-Budde @ 2021-10-18 12:47 UTC (permalink / raw)
To: Aswath Govindraju
Cc: Nishanth Menon, Tero Kristo, Rob Herring, Alexei Starovoitov,
Daniel Borkmann, Andrii Nakryiko, Martin KaFai Lau, Song Liu,
Yonghong Song, John Fastabend, KP Singh, linux-arm-kernel,
devicetree, linux-kernel, netdev, bpf
[-- Attachment #1: Type: text/plain, Size: 794 bytes --]
On 06.10.2021 11:23:37, Aswath Govindraju wrote:
> The following series of patches add support for CAN in SoC's AM65, J721e
> and AM64.
>
> The following series is dependent on,
> https://patchwork.kernel.org/project/netdevbpf/patch/20210920123344.2320-1-a-govindraju@ti.com/
This patch just hit net/master:
| 99d173fbe894 can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
| https://git.kernel.org/netdev/net/c/99d173fbe8944861a00ebd1c73817a1260d21e60
and should be part of v5.15.
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread