* test_bpf regressions on s390 since 5.4
@ 2020-07-16 15:23 seth.forshee
2020-07-22 21:01 ` Schnelle
0 siblings, 1 reply; 2+ messages in thread
From: seth.forshee @ 2020-07-16 15:23 UTC (permalink / raw)
To: Ilya Leoshkevich, Heiko Carstens, Vasily Gorbik
Cc: netdev, bpf, linux-s390, linux-kernel
The tests in lib/test_bpf.c were all passing in 5.4 when using the JIT,
but some are failing in 5.7/5.8. Some of the failures are due to the
removal of BPF_SIZE_MAX causing some expected failures to pass, which I
have already send a patch for [1]. The remaining failures appear to be
regressions. I haven't tried 5.5 or 5.6, so I'm not sure exactly when
they first appeared.
These are the tests which currently fail:
test_bpf: #37 INT: MUL_X jited:1 ret -1 != 1 FAIL (1 times)
test_bpf: #42 INT: SUB jited:1 ret -55 != 11 FAIL (1 times)
test_bpf: #44 INT: MUL jited:1 ret 439084800 != 903446258 FAIL (1 times)
test_bpf: #49 INT: shifts by register jited:1 ret -617 != -1 FAIL (1 times)
test_bpf: #371 JNE signed compare, test 1 jited:1 ret 2 != 1 FAIL (1 times)
test_bpf: #372 JNE signed compare, test 2 jited:1 ret 2 != 1 FAIL (1 times)
test_bpf: #374 JNE signed compare, test 4 jited:1 ret 1 != 2 FAIL (1 times)
test_bpf: #375 JNE signed compare, test 5 jited:1 ret 2 != 1 FAIL (1 times)
Thanks,
Seth
[1] https://lore.kernel.org/lkml/20200716143931.330122-1-seth.forshee@canonical.com/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: test_bpf regressions on s390 since 5.4
2020-07-16 15:23 test_bpf regressions on s390 since 5.4 seth.forshee
@ 2020-07-22 21:01 ` Schnelle
0 siblings, 0 replies; 2+ messages in thread
From: Schnelle @ 2020-07-22 21:01 UTC (permalink / raw)
To: seth.forshee
Cc: Ilya Leoshkevich, Heiko Carstens, Vasily Gorbik, netdev, bpf,
linux-s390, linux-kernel
Hi Seth,
seth.forshee@canonical.com writes:
> The tests in lib/test_bpf.c were all passing in 5.4 when using the JIT,
> but some are failing in 5.7/5.8. Some of the failures are due to the
> removal of BPF_SIZE_MAX causing some expected failures to pass, which I
> have already send a patch for [1]. The remaining failures appear to be
> regressions. I haven't tried 5.5 or 5.6, so I'm not sure exactly when
> they first appeared.
>
> These are the tests which currently fail:
>
> test_bpf: #37 INT: MUL_X jited:1 ret -1 != 1 FAIL (1 times)
> test_bpf: #42 INT: SUB jited:1 ret -55 != 11 FAIL (1 times)
> test_bpf: #44 INT: MUL jited:1 ret 439084800 != 903446258 FAIL (1 times)
> test_bpf: #49 INT: shifts by register jited:1 ret -617 != -1 FAIL (1 times)
> test_bpf: #371 JNE signed compare, test 1 jited:1 ret 2 != 1 FAIL (1 times)
> test_bpf: #372 JNE signed compare, test 2 jited:1 ret 2 != 1 FAIL (1 times)
> test_bpf: #374 JNE signed compare, test 4 jited:1 ret 1 != 2 FAIL (1 times)
> test_bpf: #375 JNE signed compare, test 5 jited:1 ret 2 != 1 FAIL (1 times)
The problem seems to be that the s390 JIT code generates a clgfi (compare
logical 64 - 32 Bit) for JNE:
kernel: test_bpf: #37 INT: MUL_X
bpf_jit: flen=8 proglen=66 pass=4 image=0000000035b17790 from=insmod pid=574
kernel: JIT code: 00000000: a7 f4 00 03 07 e0 eb bf f0 70 00 24 c0 e1 ff ff
kernel: JIT code: 00000010: ff ff c0 21 ff ff ff ff c0 31 00 00 00 03 b9 0c
kernel: JIT code: 00000020: 00 23 c2 2e ff ff ff fd a7 84 00 04 a7 f4 00 05
kernel: JIT code: 00000030: c0 e1 00 00 00 01 b9 04 00 2e eb bf f0 70 00 04
kernel: JIT code: 00000040: 07 fe
kernel: 000003ff800a0a48: a7f40003 brc 15,000003ff800a0a4e
kernel: 000003ff800a0a4c: 07e0 bcr 14,%r0
kernel: 000003ff800a0a4e: ebbff0700024 stmg %r11,%r15,112(%r15)
kernel: 000003ff800a0a54: c0e1ffffffff lgfi %r14,-1
kernel: 000003ff800a0a5a: c021ffffffff lgfi %r2,-1
kernel: 000003ff800a0a60: c03100000003 lgfi %r3,3
kernel: 000003ff800a0a66: b90c0023 msgr %r2,%r3
kernel: 000003ff800a0a6a: c22efffffffd clgfi %r2,4294967293
kernel: 000003ff800a0a70: a7840004 brc 8,000003ff800a0a78
kernel: 000003ff800a0a74: a7f40005 brc 15,000003ff800a0a7e
kernel: 000003ff800a0a78: c0e100000001 lgfi %r14,1
kernel: 000003ff800a0a7e: b904002e lgr %r2,%r14
kernel: 000003ff800a0a82: ebbff0700004 lmg %r11,%r15,112(%r15)
kernel: 000003ff800a0a88: 07fe bcr 15,%r14
kernel: jited:1 ret -1 != 1 FAIL (1 times)
which in the MUL_X case compares than 0xfffffffffffffffd with
0xfffffffd, which is wrong. Changing this to a proper compare fixes all
the test cases for me. Thanks for reporting!
Regards
Sven
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-07-22 21:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-16 15:23 test_bpf regressions on s390 since 5.4 seth.forshee
2020-07-22 21:01 ` Schnelle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).