From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 09/68] ARM: dts: r8a7793: move dmac nodes
Date: Fri, 12 Feb 2016 20:04:59 +0100 [thread overview]
Message-ID: <cefe5a56d3ffcdad0c63dda37f90845f42518e0a.1455303422.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1455303422.git.horms+renesas@verge.net.au>
Move dmac nodes in the r8a7793 device tree to match their location
in the r8a7791 device tree to aid comparison between the device
trees of these similar SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 124 ++++++++++++++++++++---------------------
1 file changed, 62 insertions(+), 62 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index f9d92de4f65b..0ce7cc420c9d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -239,6 +239,68 @@
power-domains = <&cpg_clocks>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
@@ -358,68 +420,6 @@
reg = <0 0xe6060000 0 0x250>;
};
- dmac0: dma-controller@e6700000 {
- compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
- reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- #dma-cells = <1>;
- dma-channels = <15>;
- };
-
- dmac1: dma-controller@e6720000 {
- compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
- reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- #dma-cells = <1>;
- dma-channels = <15>;
- };
-
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
--
2.7.0.rc3.207.g0ac5344
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/68] ARM: dts: r8a7793: move dmac nodes
Date: Fri, 12 Feb 2016 20:04:59 +0100 [thread overview]
Message-ID: <cefe5a56d3ffcdad0c63dda37f90845f42518e0a.1455303422.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1455303422.git.horms+renesas@verge.net.au>
Move dmac nodes in the r8a7793 device tree to match their location
in the r8a7791 device tree to aid comparison between the device
trees of these similar SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 124 ++++++++++++++++++++---------------------
1 file changed, 62 insertions(+), 62 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index f9d92de4f65b..0ce7cc420c9d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -239,6 +239,68 @@
power-domains = <&cpg_clocks>;
};
+ dmac0: dma-controller at e6700000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller at e6720000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c at e6508000 {
#address-cells = <1>;
@@ -358,68 +420,6 @@
reg = <0 0xe6060000 0 0x250>;
};
- dmac0: dma-controller at e6700000 {
- compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
- reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- #dma-cells = <1>;
- dma-channels = <15>;
- };
-
- dmac1: dma-controller at e6720000 {
- compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
- reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- #dma-cells = <1>;
- dma-channels = <15>;
- };
-
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
--
2.7.0.rc3.207.g0ac5344
next prev parent reply other threads:[~2016-02-12 19:04 UTC|newest]
Thread overview: 122+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-12 19:05 [GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
2016-02-12 19:04 ` [PATCH 01/68] ARM: dts: gose: Add GPIO keys to DT Simon Horman
2016-02-12 19:04 ` Simon Horman
2016-02-13 20:23 ` Geert Uytterhoeven
2016-02-15 7:18 ` Simon Horman
2016-02-15 7:45 ` Geert Uytterhoeven
2016-02-12 19:04 ` [PATCH 02/68] ARM: dts: gose: Add GPIO leds " Simon Horman
2016-02-12 19:04 ` [PATCH 03/68] ARM: dts: porter: add DU DT support Simon Horman
2016-02-12 19:04 ` Simon Horman
2016-02-12 19:04 ` [PATCH 04/68] ARM: dts: r8a7793: Add I2C master nodes to DT Simon Horman
2016-02-12 19:04 ` [PATCH 05/68] ARM: dts: alt: Add QSPI device " Simon Horman
2016-02-12 19:04 ` [PATCH 06/68] ARM: dts: r8a7790: use fallback usbhs compatibility string Simon Horman
2016-02-12 19:04 ` [PATCH 07/68] ARM: dts: r8a7791: " Simon Horman
2016-02-12 19:04 ` [PATCH 08/68] ARM: dts: r8a7794: " Simon Horman
2016-02-12 19:04 ` Simon Horman [this message]
2016-02-12 19:04 ` [PATCH 09/68] ARM: dts: r8a7793: move dmac nodes Simon Horman
2016-02-12 19:05 ` [PATCH 10/68] ARM: dts: gose: add i2c2 bus to device tree Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 11/68] ARM: dts: r8a7790: use GIC_* defines Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 12/68] ARM: dts: r8a7791: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 13/68] ARM: dts: silk: add DU DT support Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 14/68] ARM: dts: r8a7793: use GIC_* defines Simon Horman
2016-02-12 19:05 ` [PATCH 15/68] ARM: dts: r8a7794: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 16/68] ARM: dts: r8a7793: gose: Add HDMI video out support Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 17/68] ARM: dts: r8a7778: use GIC_* defines Simon Horman
2016-02-12 19:05 ` [PATCH 18/68] ARM: dts: r8a7779: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 19/68] ARM: dts: porter: add sound support Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 20/68] ARM: dts: r8a73a4: use GIC_* defines Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 21/68] ARM: dts: r8a7740: " Simon Horman
2016-02-12 19:05 ` [PATCH 22/68] ARM: dts: r8a7793: add MSTP10 clocks to device tree Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 23/68] ARM: dts: r8a7793: add audio clock " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 24/68] ARM: dts: r8a7793: add m2 " Simon Horman
2016-02-12 19:05 ` [PATCH 25/68] ARM: dts: r8a7793: add R-Car sound support " Simon Horman
2016-02-12 19:05 ` [PATCH 26/68] ARM: dts: r8a7793: add DVC " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 27/68] ARM: dts: r8a7793: add audio DMAC clocks " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 28/68] ARM: dts: r8a7793: add audio DMAC " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 29/68] ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 30/68] ARM: dts: gose: Enable sound PIO support in device tree Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 31/68] ARM: dts: gose: enable sound DMA " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 32/68] ARM: dts: gose: enable sound DMA support via BUSIF " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 33/68] ARM: dts: gose: enable sound DMA support via SRC " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 34/68] ARM: dts: gose: enable sound DMA support via DVC " Simon Horman
2016-02-12 19:05 ` [PATCH 35/68] ARM: dts: r8a7793: enable audio DMAC " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 36/68] ARM: dts: r7s72100: use GIC_* defines Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 37/68] ARM: dts: sh73a0: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 38/68] ARM: dts: emev2: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 39/68] ARM: dts: r8a7778: Add SCIF fallback compatibility strings Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 40/68] ARM: dts: r8a7779: " Simon Horman
2016-02-12 19:05 ` [PATCH 41/68] ARM: dts: r8a7790: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 42/68] ARM: dts: r8a7791: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 43/68] ARM: dts: r8a7793: " Simon Horman
2016-02-12 19:05 ` [PATCH 44/68] ARM: dts: r8a7794: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 45/68] ARM: dts: sh73a0: Rename the serial port clock to fck Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 46/68] ARM: dts: r7s72100: " Simon Horman
2016-02-12 19:05 ` [PATCH 47/68] ARM: dts: r8a73a4: " Simon Horman
2016-02-12 19:05 ` [PATCH 48/68] ARM: dts: r8a7740: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 49/68] ARM: dts: r8a7778: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 50/68] ARM: dts: r8a7779: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 51/68] ARM: dts: r8a7790: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 52/68] ARM: dts: r8a7791: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 53/68] ARM: dts: r8a7793: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 54/68] ARM: dts: r8a7794: " Simon Horman
2016-02-12 19:05 ` [PATCH 55/68] ARM: dts: r8a7778: Add BRG support for SCIF Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 56/68] ARM: dts: r8a7779: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 57/68] ARM: dts: r8a7790: Add BRG support for (H)SCIF Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 58/68] ARM: dts: r8a7791: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 59/68] ARM: dts: r8a7793: Add BRG support for SCIF Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 60/68] ARM: dts: r8a7794: Add BRG support for (H)SCIF Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 61/68] ARM: dts: alt: Enable SCIF_CLK frequency and pins Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 62/68] ARM: dts: bockw: " Simon Horman
2016-02-12 19:05 ` [PATCH 63/68] ARM: dts: gose: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 64/68] ARM: dts: koelsch: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 65/68] ARM: dts: lager: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 66/68] ARM: dts: marzen: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 67/68] ARM: dts: porter: " Simon Horman
2016-02-12 19:05 ` Simon Horman
2016-02-12 19:05 ` [PATCH 68/68] ARM: dts: silk: " Simon Horman
2016-02-24 22:02 ` [GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.6 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cefe5a56d3ffcdad0c63dda37f90845f42518e0a.1455303422.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.