[cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add LCD support

[cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add LCD support

[Marian-Cristian Rotariu]

[-- Attachment #1: Type: text/plain, Size: 3387 bytes --]

commit 6f89dd9e9325d05b1f54d860dbbc84b42aa40759 upstream.

The iwg20d comes with a 7" capacitive touch screen, therefore
add support for it.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1573660292-10629-11-git-send-email-fabrizio.castro@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
(remove the LVDS decoder as there is no driver for it;
 add panel timings to panel node since the LVDS driver reads them off the
 panel DT node)
Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi  | 81 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi |  1 -
 2 files changed, 81 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 011dbab..52c1787 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -49,6 +49,40 @@
 		clock-frequency = <26000000>;
 	};
 
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel {
+	    compatible = "edt,etm0700g0dh6", "simple-panel";
+	    backlight = <&lcd_backlight>;
+
+	    port {
+		    panel_in: endpoint {
+			    remote-endpoint = <&du_out_lvds0>;
+		    };
+	    };
+
+	    panel-timing {
+		    clock-frequency = <33260>;
+		    hactive = <800>;
+		    vactive = <480>;
+
+		    hfront-porch = <40>;
+		    hback-porch = <88>;
+		    hsync-len = <128>;
+
+		    vback-porch = <33>;
+		    vfront-porch = <10>;
+		    vsync-len = <2>;
+	    };
+	};
+
 	reg_1p5v: 1p5v {
 		compatible = "regulator-fixed";
 		regulator-name = "1P5V";
@@ -123,6 +157,35 @@
 	status = "okay";
 };
 
+&du {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			du_out_rgb: endpoint {
+			};
+		};
+		port@1 {
+			reg = <1>;
+			du_out_lvds0: endpoint {
+			       remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpio2 {
+	touch-interrupt {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
 &hsusb {
 	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
@@ -150,6 +213,13 @@
 		VDDIO-supply = <&reg_3p3v>;
 		VDDD-supply = <&reg_1p5v>;
 	};
+
+	touch: touchpanel@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+	};
 };
 
 &pci0 {
@@ -183,6 +253,11 @@
 		function = "i2c2";
 	};
 
+	pwm3_pins: pwm3 {
+		groups = "pwm3";
+		function = "pwm3";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
@@ -215,6 +290,12 @@
 	};
 };
 
+&pwm3 {
+	pinctrl-0 = <&pwm3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &rcar_sound {
 	pinctrl-0 = <&sound_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
index e643064..ec4c29a 100644
--- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -42,7 +42,6 @@
 &du {
 	pinctrl-0 = <&du_pins>;
 	pinctrl-names = "default";
-	status = "okay";
 
 	ports {
 		port@0 {
-- 
2.7.4


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4661): https://lists.cip-project.org/g/cip-dev/message/4661
Mute This Topic: https://lists.cip-project.org/mt/74623758/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add LCD support

[Nobuhiro Iwamatsu]

[-- Attachment #1: Type: text/plain, Size: 4447 bytes --]

Hi,

> -----Original Message-----
> From: cip-dev@lists.cip-project.org [mailto:cip-dev@lists.cip-project.org] On Behalf Of Marian-Cristian Rotariu
> Sent: Tuesday, June 2, 2020 5:43 PM
> To: cip-dev@lists.cip-project.org
> Cc: Chris Paterson <chris.paterson2@renesas.com>; fabrizio.castro.jz@renesas.com
> Subject: [cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add LCD support
> 
> commit 6f89dd9e9325d05b1f54d860dbbc84b42aa40759 upstream.
> 
> The iwg20d comes with a 7" capacitive touch screen, therefore
> add support for it.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Link: https://lore.kernel.org/r/1573660292-10629-11-git-send-email-fabrizio.castro@bp.renesas.com
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> (remove the LVDS decoder as there is no driver for it;
>  add panel timings to panel node since the LVDS driver reads them off the
>  panel DT node)
> Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
> ---
>  arch/arm/boot/dts/iwg20d-q7-common.dtsi  | 81 ++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi |  1 -
>  2 files changed, 81 insertions(+), 1 deletion(-)


Looks good to me this patch.
BTW, when you confirmed this patch, did you update the kernel config?
If we need to add drivers, please tell us what kernel config you used.

Best regards,
  Nobuhiro
> 
> diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> index 011dbab..52c1787 100644
> --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> @@ -49,6 +49,40 @@
>  		clock-frequency = <26000000>;
>  	};
> 
> +	lcd_backlight: backlight {
> +		compatible = "pwm-backlight";
> +
> +		pwms = <&pwm3 0 5000000 0>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <7>;
> +		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	panel {
> +	    compatible = "edt,etm0700g0dh6", "simple-panel";
> +	    backlight = <&lcd_backlight>;
> +
> +	    port {
> +		    panel_in: endpoint {
> +			    remote-endpoint = <&du_out_lvds0>;
> +		    };
> +	    };
> +
> +	    panel-timing {
> +		    clock-frequency = <33260>;
> +		    hactive = <800>;
> +		    vactive = <480>;
> +
> +		    hfront-porch = <40>;
> +		    hback-porch = <88>;
> +		    hsync-len = <128>;
> +
> +		    vback-porch = <33>;
> +		    vfront-porch = <10>;
> +		    vsync-len = <2>;
> +	    };
> +	};
> +
>  	reg_1p5v: 1p5v {
>  		compatible = "regulator-fixed";
>  		regulator-name = "1P5V";
> @@ -123,6 +157,35 @@
>  	status = "okay";
>  };
> 
> +&du {
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@0 {
> +			reg = <0>;
> +			du_out_rgb: endpoint {
> +			};
> +		};
> +		port@1 {
> +			reg = <1>;
> +			du_out_lvds0: endpoint {
> +			       remote-endpoint = <&panel_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&gpio2 {
> +	touch-interrupt {
> +		gpio-hog;
> +		gpios = <12 GPIO_ACTIVE_LOW>;
> +		input;
> +	};
> +};
> +
>  &hsusb {
>  	status = "okay";
>  	pinctrl-0 = <&usb0_pins>;
> @@ -150,6 +213,13 @@
>  		VDDIO-supply = <&reg_3p3v>;
>  		VDDD-supply = <&reg_1p5v>;
>  	};
> +
> +	touch: touchpanel@38 {
> +		compatible = "edt,edt-ft5406";
> +		reg = <0x38>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
> +	};
>  };
> 
>  &pci0 {
> @@ -183,6 +253,11 @@
>  		function = "i2c2";
>  	};
> 
> +	pwm3_pins: pwm3 {
> +		groups = "pwm3";
> +		function = "pwm3";
> +	};
> +
>  	scif0_pins: scif0 {
>  		groups = "scif0_data_d";
>  		function = "scif0";
> @@ -215,6 +290,12 @@
>  	};
>  };
> 
> +&pwm3 {
> +	pinctrl-0 = <&pwm3_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
>  &rcar_sound {
>  	pinctrl-0 = <&sound_pins>;
>  	pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
> index e643064..ec4c29a 100644
> --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
> +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
> @@ -42,7 +42,6 @@
>  &du {
>  	pinctrl-0 = <&du_pins>;
>  	pinctrl-names = "default";
> -	status = "okay";
> 
>  	ports {
>  		port@0 {
> --
> 2.7.4


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4664): https://lists.cip-project.org/g/cip-dev/message/4664
Mute This Topic: https://lists.cip-project.org/mt/74623758/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add LCD support

[Pavel Machek]

[-- Attachment #1.1: Type: text/plain, Size: 625 bytes --]

Hi!

> > The iwg20d comes with a 7" capacitive touch screen, therefore
> > add support for it.
> 
> Looks good to me this patch.
> BTW, when you confirmed this patch, did you update the kernel config?
> If we need to add drivers, please tell us what kernel config you
> used.

I don't see anything wrong, either.

SIMPLE_PANEL is not enabled in
4.4.y-cip/arm/renesas_shmobile_defconfig , and it seems to be driver
relevant to this panel.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4696): https://lists.cip-project.org/g/cip-dev/message/4696
Mute This Topic: https://lists.cip-project.org/mt/74623758/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add LCD support

[Pavel Machek]

[-- Attachment #1.1: Type: text/plain, Size: 330 bytes --]

Hi!

> The iwg20d comes with a 7" capacitive touch screen, therefore
> add support for it.

Thanks, applied, I'll run tests on it and push the result.

Best regards,
								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4702): https://lists.cip-project.org/g/cip-dev/message/4702
Mute This Topic: https://lists.cip-project.org/mt/74623758/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add LCD support

[Pavel Machek]

[-- Attachment #1.1: Type: text/plain, Size: 1195 bytes --]

Hi!

> > SIMPLE_PANEL is not enabled in
> > 4.4.y-cip/arm/renesas_shmobile_defconfig , and it seems to be driver
> > relevant to this panel.
> 
> This seems to be a problem. DRM_PANEL_SIMPLE depends on DRM_PANEL,
> but DRM_PANEL is not user selectable, it needs to be selected by another option.
> In upstream, commit:
> https://github.com/torvalds/linux/commit/bf7149f34
> 
> modified the LVDS driver to use the panel API to delegate panel handling, rather
> than parsing the DT manually, and of course in the same context Kconfig is
> modified to select DRM_PANEL.
> 
> I think we should have another look at this, do you guys think it's possible to drop
> this patch?

It is possible to drop the patch and force push before new commits are
added on top. It is also possible to queue a revert at any later time.

OTOH if the patch is not wrong, just needs another patch to be useful,
I'd keep it.

Adding prompt to Kconfig so that it can be enabled manually should not
be too hard to do.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4725): https://lists.cip-project.org/g/cip-dev/message/4725
Mute This Topic: https://lists.cip-project.org/mt/74623758/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add LCD support

[Fabrizio Castro]

[-- Attachment #1: Type: text/plain, Size: 2241 bytes --]

Hi Pavel,

thank you for your feedback!

> From: cip-dev@lists.cip-project.org <cip-dev@lists.cip-project.org> On Behalf
> Of Pavel Machek via lists.cip-project.org
> Sent: 05 June 2020 12:45
> To: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Cc: Pavel Machek <pavel@denx.de>; cip-dev@lists.cip-project.org; Chris
> Paterson <Chris.Paterson2@renesas.com>
> Subject: Re: [cip-dev] [PATCH v2 v4.4.y-cip] ARM: dts: iwg20d-q7-common: Add
> LCD support
>
> Hi!
>
> > > SIMPLE_PANEL is not enabled in
> > > 4.4.y-cip/arm/renesas_shmobile_defconfig , and it seems to be driver
> > > relevant to this panel.
> >
> > This seems to be a problem. DRM_PANEL_SIMPLE depends on DRM_PANEL,
> > but DRM_PANEL is not user selectable, it needs to be selected by another
> option.
> > In upstream, commit:
> > https://github.com/torvalds/linux/commit/bf7149f34
> >
> > modified the LVDS driver to use the panel API to delegate panel handling,
> rather
> > than parsing the DT manually, and of course in the same context Kconfig is
> > modified to select DRM_PANEL.
> >
> > I think we should have another look at this, do you guys think it's possible to
> drop
> > this patch?
>
> It is possible to drop the patch and force push before new commits are
> added on top. It is also possible to queue a revert at any later time.
>
> OTOH if the patch is not wrong, just needs another patch to be useful,
> I'd keep it.
>
> Adding prompt to Kconfig so that it can be enabled manually should not
> be too hard to do.

Thank you for laying down all of the options for me. Since you are open
to a revert patch, I think we'll have another look at this at a later stage,
fixes will follow.

Thanks,
Fab

>
> Best regards,
> Pavel
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647

[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4726): https://lists.cip-project.org/g/cip-dev/message/4726
Mute This Topic: https://lists.cip-project.org/mt/74623758/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-