[cip-dev][isar-cip-core][PATCH v6 0/7] Encrypt Partition in initramfs

[cip-dev][isar-cip-core][PATCH v6 0/7] Encrypt Partition in initramfs

[Quirin Gylstorff]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

This encrypts a partition with LUKS and uses the TPM2 to unlock the partition during
boot. 

Adapt start-qemu to support tpm2.

The implementation uses systemd-cryptenroll to add the TPM protected
passphrase to the LUKS header. systemd-cryptenroll was added with systemd version > 248.

The following table shows the support of systemd-cryptenroll in Debian
release.

| Debian version | systemd-cryptenroll suppported |
| Buster(10)     | No                             |
| Bullseye(11)   | with backports                 |
| Bookworm(12)   | yes                            |

I am currently testing a adaptation for Debian 11 (Bullseye) with 
clevis instead of systemd-cryptenroll. If clevis works I will sent a
additional patch.

Changes v2:
 - rewrite for multiple partition
 - add rencrypt for populated partitions
 - encrypt /var and /home

Changes v3:
 - remove additional partition crypt_data
 - add Readme
 - fix KConfig
 - only systemd is from backports
 - start-qemu now checks .config.yaml for TPM2 support
 - correct whitespaces

Changes v4:
 - whitespaces
 - README add requirements for systemd 248
 - Kconfig add help information
 - adapt commit message of patch 4 (add information about extra-space)

Changes v5:
 - rebase on origin/next
 - rename kas/opt/tpm.yml to kas/opt/encrypt-partitions.yml
 - Kconfig change help text and option name from IMAGE_TPM_ENCRYPTION
to IMAGE_DATA_ENCRYPTION
 
Changes v6:
 - Fix .gitlabci.yml - use kas/opt/encrypt-partitions.yml 
 - Fix start-qemu.sh - use IMAGE_DATA_ENCRYPTION 
 - Avoid package clash by disabling all backport packages

Quirin Gylstorff (7):
  use bullseye backports for systemd-cryptenroll
  KConfig: add option to encrypt data partitions
  start-qemu.sh: Create a tpm2 device
  Add initramfs hook to encrypt a partition
  overlay: add prerequisite 'encrypt_partition'
  .gitlabci: Add ci build
  Add README for encrypted partitions

 .gitlab-ci.yml                                |  13 ++
 Kconfig                                       |  10 ++
 conf/distro/debian-bullseye-backports.list    |   1 +
 .../preferences.bullseye-backports.tpm.conf   |   8 +
 doc/README.tpm2.encryption.md                 |  55 +++++++
 kas/opt/encrypt-partitions.yml                |  21 +++
 .../cip-core-initramfs/cip-core-initramfs.bb  |   2 +
 .../files/encrypt_partition.env.tmpl          |   2 +
 .../files/encrypt_partition.hook              |  53 +++++++
 .../files/encrypt_partition.script            | 145 ++++++++++++++++++
 .../initramfs-crypt-hook_0.1.bb               |  40 +++++
 .../initramfs-overlay-hook/files/overlay.hook |   1 +
 .../files/overlay.script.tmpl                 |  12 +-
 .../initramfs-overlay-hook_0.1.bb             |   2 +-
 start-qemu.sh                                 |  27 +++-
 wic/x86-efibootguard.wks.in                   |   5 +-
 16 files changed, 384 insertions(+), 13 deletions(-)
 create mode 100644 conf/distro/debian-bullseye-backports.list
 create mode 100644 conf/distro/preferences.bullseye-backports.tpm.conf
 create mode 100644 doc/README.tpm2.encryption.md
 create mode 100644 kas/opt/encrypt-partitions.yml
 create mode 100644 recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.env.tmpl
 create mode 100644 recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.hook
 create mode 100644 recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.script
 create mode 100644 recipes-initramfs/initramfs-crypt-hook/initramfs-crypt-hook_0.1.bb

-- 
2.39.2

[cip-dev][isar-cip-core][PATCH v6 1/7] use bullseye backports for systemd-cryptenroll

[Quirin Gylstorff]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

Systemd >= 251 is required for systemd-cryptenroll. This version
is part of backports.

Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
---
 conf/distro/debian-bullseye-backports.list    |  1 +
 .../preferences.bullseye-backports.tpm.conf   |  8 ++++++++
 kas/opt/encrypt-partitions.yml                | 20 +++++++++++++++++++
 3 files changed, 29 insertions(+)
 create mode 100644 conf/distro/debian-bullseye-backports.list
 create mode 100644 conf/distro/preferences.bullseye-backports.tpm.conf
 create mode 100644 kas/opt/encrypt-partitions.yml

diff --git a/conf/distro/debian-bullseye-backports.list b/conf/distro/debian-bullseye-backports.list
new file mode 100644
index 0000000..3a55e4c
--- /dev/null
+++ b/conf/distro/debian-bullseye-backports.list
@@ -0,0 +1 @@
+deb http://ftp.us.debian.org/debian bullseye-backports main contrib non-free
diff --git a/conf/distro/preferences.bullseye-backports.tpm.conf b/conf/distro/preferences.bullseye-backports.tpm.conf
new file mode 100644
index 0000000..60c4265
--- /dev/null
+++ b/conf/distro/preferences.bullseye-backports.tpm.conf
@@ -0,0 +1,8 @@
+Package: *
+Pin: release n=bullseye-backports
+Pin-Priority: -1
+
+Explanation: Use systemd and its dependencies from debian-backports to support systemd-cryptenroll
+Package: libnss-myhostname libnss-mymachines libnss-resolve libnss-systemd libpam-systemd libudev* libsystemd* systemd systemd-* udev
+Pin: release n=bullseye-backports
+Pin-Priority: 801
diff --git a/kas/opt/encrypt-partitions.yml b/kas/opt/encrypt-partitions.yml
new file mode 100644
index 0000000..1f91c0c
--- /dev/null
+++ b/kas/opt/encrypt-partitions.yml
@@ -0,0 +1,20 @@
+#
+# CIP Core, generic profile
+#
+# Copyright (c) Siemens AG, 2022
+#
+# Authors:
+#  Quirin Gylstorff <quirin.gylstorff@siemens.com>
+#
+# SPDX-License-Identifier: MIT
+#
+
+header:
+  version: 12
+
+local_conf_header:
+  systemd-cryptenroll: |
+    DISTRO_APT_SOURCES:append:bullseye = " conf/distro/debian-bullseye-backports.list"
+    DISTRO_APT_PREFERENCES:append:bullseye = " conf/distro/preferences.bullseye-backports.tpm.conf"
+
+
-- 
2.39.2

[cip-dev][isar-cip-core][PATCH v6 2/7] KConfig: add option to encrypt data partitions

[Quirin Gylstorff]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
---
 Kconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Kconfig b/Kconfig
index 7d72094..cafb04c 100644
--- a/Kconfig
+++ b/Kconfig
@@ -193,4 +193,14 @@ config KAS_INCLUDE_SWUPDATE_SECBOOT
 	default "kas/opt/ebg-swu.yml" if IMAGE_SWUPDATE && !IMAGE_SECURE_BOOT
 	default "kas/opt/ebg-secure-boot-snakeoil.yml" if IMAGE_SECURE_BOOT
 
+config IMAGE_DATA_ENCRYPTION
+	bool "Encrypt data partitions on first boot"
+	depends on TARGET_QEMU_AMD64
+	help
+	  This enables LUKS encryption for the partitions /var and /home.
+
+config KAS_INCLUDE_DATA_ENCRYPTION
+	string
+	default "kas/opt/encrypt-partitions.yml" if IMAGE_DATA_ENCRYPTION
+
 endif
-- 
2.39.2

Re: [cip-dev][isar-cip-core][PATCH v6 2/7] KConfig: add option to encrypt data partitions

[Jan Kiszka]

On 09.03.23 11:28, Quirin Gylstorff wrote:
> From: Quirin Gylstorff <quirin.gylstorff@siemens.com>
> 
> Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
> ---
>  Kconfig | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Kconfig b/Kconfig
> index 7d72094..cafb04c 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -193,4 +193,14 @@ config KAS_INCLUDE_SWUPDATE_SECBOOT
>  	default "kas/opt/ebg-swu.yml" if IMAGE_SWUPDATE && !IMAGE_SECURE_BOOT
>  	default "kas/opt/ebg-secure-boot-snakeoil.yml" if IMAGE_SECURE_BOOT
>  
> +config IMAGE_DATA_ENCRYPTION
> +	bool "Encrypt data partitions on first boot"
> +	depends on TARGET_QEMU_AMD64

This depends on IMAGE_SWUPDATE. Logically, it only makes sense in
combination with IMAGE_SECURE_BOOT, so I will add that as selection here.

As the TPM emulation is not hw-dependenent, I would like to add other
QEMU targets as well. But it seems we need to flip kernel configs there
as well first. So, this can come later.

Jan

> +	help
> +	  This enables LUKS encryption for the partitions /var and /home.
> +
> +config KAS_INCLUDE_DATA_ENCRYPTION
> +	string
> +	default "kas/opt/encrypt-partitions.yml" if IMAGE_DATA_ENCRYPTION
> +
>  endif

-- 
Siemens AG, Technology
Competence Center Embedded Linux

[cip-dev][isar-cip-core][PATCH v6 3/7] start-qemu.sh: Create a tpm2 device

[Quirin Gylstorff]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

This allows testing the partition encryption with qemu.

Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
---
 start-qemu.sh | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/start-qemu.sh b/start-qemu.sh
index fcfbc5b..b46b066 100755
--- a/start-qemu.sh
+++ b/start-qemu.sh
@@ -28,6 +28,9 @@ if grep -s -q "IMAGE_SECURE_BOOT: true" .config.yaml; then
 elif grep -s -q "IMAGE_SWUPDATE: true" .config.yaml; then
 	SWUPDATE_BOOT="true"
 fi
+if grep -s -q "IMAGE_DATA_ENCRYPTION: true" .config.yaml; then
+	TPM2_ENCRYPTION="true"
+fi
 
 if [ -n "${QEMU_PATH}" ]; then
 	QEMU_PATH="${QEMU_PATH}/"
@@ -143,7 +146,21 @@ QEMU_COMMON_OPTIONS=" \
 	-m 1G \
 	-serial mon:stdio \
 	-netdev user,id=net,hostfwd=tcp:127.0.0.1:22222-:22 \
-	${QEMU_EXTRA_ARGS}"
+	"
+
+if [ "$TPM2_ENCRYPTION" = "true" ] && [ -x /usr/bin/swtpm ]; then
+	swtpm_dir="/tmp/qemu-swtpm"
+	mkdir -p "${swtpm_dir}"
+	rm "${swtpm_dir}"/*
+	if swtpm socket -d --tpmstate dir="${swtpm_dir}" \
+			 --ctrl type=unixio,path="${swtpm_dir}"/sock \
+			 --tpm2; then
+		QEMU_EXTRA_ARGS="${QEMU_EXTRA_ARGS} \
+			 -chardev socket,id=chrtpm,path=${swtpm_dir}/sock \
+			 -tpmdev emulator,id=tpm0,chardev=chrtpm \
+			 -device tpm-tis,tpmdev=tpm0"
+	fi
+fi
 
 if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
 	case "${arch}" in
@@ -158,14 +175,14 @@ if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
 					-drive if=pflash,format=raw,unit=0,readonly=on,file=${ovmf_code} \
 					-drive if=pflash,format=raw,file=${ovmf_vars} \
 					-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
-					${QEMU_COMMON_OPTIONS} "$@"
+					${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
 			else
 				ovmf_code=${OVMF_CODE:-./build/tmp/deploy/images/qemu-amd64/OVMF/OVMF_CODE_4M.fd}
 
 				${QEMU_PATH}${QEMU} \
 					-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
 					-drive if=pflash,format=raw,unit=0,readonly=on,file=${ovmf_code} \
-					${QEMU_COMMON_OPTIONS} "$@"
+					${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
 			fi
 			;;
 		arm64|aarch64|arm|armhf)
@@ -174,7 +191,7 @@ if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
 			${QEMU_PATH}${QEMU} \
 				-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
 				-bios ${u_boot_bin} \
-				${QEMU_COMMON_OPTIONS} "$@"
+				${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
 			;;
 		rv64|riscv64)
 			opensbi_bin=${FIRMWARE_BIN:-./build/tmp/deploy/images/qemu-${QEMU_ARCH}/fw_payload.bin}
@@ -199,5 +216,5 @@ else
 			-drive file=${IMAGE_FILE},discard=unmap,if=none,id=disk,format=raw \
 			-kernel ${KERNEL_FILE} -append "${KERNEL_CMDLINE}" \
 			-initrd ${INITRD_FILE} \
-			${QEMU_COMMON_OPTIONS} "$@"
+			${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
 fi
-- 
2.39.2

Re: [cip-dev][isar-cip-core][PATCH v6 3/7] start-qemu.sh: Create a tpm2 device

[Jan Kiszka]

On 09.03.23 11:28, Quirin Gylstorff wrote:
> From: Quirin Gylstorff <quirin.gylstorff@siemens.com>
> 
> This allows testing the partition encryption with qemu.
> 
> Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
> ---
>  start-qemu.sh | 27 ++++++++++++++++++++++-----
>  1 file changed, 22 insertions(+), 5 deletions(-)
> 
> diff --git a/start-qemu.sh b/start-qemu.sh
> index fcfbc5b..b46b066 100755
> --- a/start-qemu.sh
> +++ b/start-qemu.sh
> @@ -28,6 +28,9 @@ if grep -s -q "IMAGE_SECURE_BOOT: true" .config.yaml; then
>  elif grep -s -q "IMAGE_SWUPDATE: true" .config.yaml; then
>  	SWUPDATE_BOOT="true"
>  fi
> +if grep -s -q "IMAGE_DATA_ENCRYPTION: true" .config.yaml; then
> +	TPM2_ENCRYPTION="true"
> +fi
>  
>  if [ -n "${QEMU_PATH}" ]; then
>  	QEMU_PATH="${QEMU_PATH}/"
> @@ -143,7 +146,21 @@ QEMU_COMMON_OPTIONS=" \
>  	-m 1G \
>  	-serial mon:stdio \
>  	-netdev user,id=net,hostfwd=tcp:127.0.0.1:22222-:22 \
> -	${QEMU_EXTRA_ARGS}"
> +	"
> +
> +if [ "$TPM2_ENCRYPTION" = "true" ] && [ -x /usr/bin/swtpm ]; then
> +	swtpm_dir="/tmp/qemu-swtpm"
> +	mkdir -p "${swtpm_dir}"
> +	rm "${swtpm_dir}"/*

This kills the previous TPM state, preventing to power-cycle the VM. We
rather need to persist it aside the disk image. I'm massaging the script
in that direction.

Unfortunately, the unix socket can't be pushed there as well - path
string becomes too long...

Jan

> +	if swtpm socket -d --tpmstate dir="${swtpm_dir}" \
> +			 --ctrl type=unixio,path="${swtpm_dir}"/sock \
> +			 --tpm2; then
> +		QEMU_EXTRA_ARGS="${QEMU_EXTRA_ARGS} \
> +			 -chardev socket,id=chrtpm,path=${swtpm_dir}/sock \
> +			 -tpmdev emulator,id=tpm0,chardev=chrtpm \
> +			 -device tpm-tis,tpmdev=tpm0"
> +	fi
> +fi
>  
>  if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
>  	case "${arch}" in
> @@ -158,14 +175,14 @@ if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
>  					-drive if=pflash,format=raw,unit=0,readonly=on,file=${ovmf_code} \
>  					-drive if=pflash,format=raw,file=${ovmf_vars} \
>  					-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
> -					${QEMU_COMMON_OPTIONS} "$@"
> +					${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
>  			else
>  				ovmf_code=${OVMF_CODE:-./build/tmp/deploy/images/qemu-amd64/OVMF/OVMF_CODE_4M.fd}
>  
>  				${QEMU_PATH}${QEMU} \
>  					-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
>  					-drive if=pflash,format=raw,unit=0,readonly=on,file=${ovmf_code} \
> -					${QEMU_COMMON_OPTIONS} "$@"
> +					${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
>  			fi
>  			;;
>  		arm64|aarch64|arm|armhf)
> @@ -174,7 +191,7 @@ if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
>  			${QEMU_PATH}${QEMU} \
>  				-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
>  				-bios ${u_boot_bin} \
> -				${QEMU_COMMON_OPTIONS} "$@"
> +				${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
>  			;;
>  		rv64|riscv64)
>  			opensbi_bin=${FIRMWARE_BIN:-./build/tmp/deploy/images/qemu-${QEMU_ARCH}/fw_payload.bin}
> @@ -199,5 +216,5 @@ else
>  			-drive file=${IMAGE_FILE},discard=unmap,if=none,id=disk,format=raw \
>  			-kernel ${KERNEL_FILE} -append "${KERNEL_CMDLINE}" \
>  			-initrd ${INITRD_FILE} \
> -			${QEMU_COMMON_OPTIONS} "$@"
> +			${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
>  fi

-- 
Siemens AG, Technology
Competence Center Embedded Linux

Re: [cip-dev][isar-cip-core][PATCH v6 3/7] start-qemu.sh: Create a tpm2 device

[Gylstorff Quirin]

On 3/13/23 08:08, Jan Kiszka wrote:
> On 09.03.23 11:28, Quirin Gylstorff wrote:
>> From: Quirin Gylstorff <quirin.gylstorff@siemens.com>
>>
>> This allows testing the partition encryption with qemu.
>>
>> Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
>> ---
>>   start-qemu.sh | 27 ++++++++++++++++++++++-----
>>   1 file changed, 22 insertions(+), 5 deletions(-)
>>
>> diff --git a/start-qemu.sh b/start-qemu.sh
>> index fcfbc5b..b46b066 100755
>> --- a/start-qemu.sh
>> +++ b/start-qemu.sh
>> @@ -28,6 +28,9 @@ if grep -s -q "IMAGE_SECURE_BOOT: true" .config.yaml; then
>>   elif grep -s -q "IMAGE_SWUPDATE: true" .config.yaml; then
>>   	SWUPDATE_BOOT="true"
>>   fi
>> +if grep -s -q "IMAGE_DATA_ENCRYPTION: true" .config.yaml; then
>> +	TPM2_ENCRYPTION="true"
>> +fi
>>   
>>   if [ -n "${QEMU_PATH}" ]; then
>>   	QEMU_PATH="${QEMU_PATH}/"
>> @@ -143,7 +146,21 @@ QEMU_COMMON_OPTIONS=" \
>>   	-m 1G \
>>   	-serial mon:stdio \
>>   	-netdev user,id=net,hostfwd=tcp:127.0.0.1:22222-:22 \
>> -	${QEMU_EXTRA_ARGS}"
>> +	"
>> +
>> +if [ "$TPM2_ENCRYPTION" = "true" ] && [ -x /usr/bin/swtpm ]; then
>> +	swtpm_dir="/tmp/qemu-swtpm"
>> +	mkdir -p "${swtpm_dir}"
>> +	rm "${swtpm_dir}"/*
> 
> This kills the previous TPM state, preventing to power-cycle the VM. We
> rather need to persist it aside the disk image. I'm massaging the script
> in that direction.
> 

This was for debugging purposes as the TPM is no longer accessible after 
a number of keys entered.

Quirin
> Unfortunately, the unix socket can't be pushed there as well - path
> string becomes too long...
> 
> Jan
> 
>> +	if swtpm socket -d --tpmstate dir="${swtpm_dir}" \
>> +			 --ctrl type=unixio,path="${swtpm_dir}"/sock \
>> +			 --tpm2; then
>> +		QEMU_EXTRA_ARGS="${QEMU_EXTRA_ARGS} \
>> +			 -chardev socket,id=chrtpm,path=${swtpm_dir}/sock \
>> +			 -tpmdev emulator,id=tpm0,chardev=chrtpm \
>> +			 -device tpm-tis,tpmdev=tpm0"
>> +	fi
>> +fi
>>   
>>   if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
>>   	case "${arch}" in
>> @@ -158,14 +175,14 @@ if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
>>   					-drive if=pflash,format=raw,unit=0,readonly=on,file=${ovmf_code} \
>>   					-drive if=pflash,format=raw,file=${ovmf_vars} \
>>   					-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
>> -					${QEMU_COMMON_OPTIONS} "$@"
>> +					${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
>>   			else
>>   				ovmf_code=${OVMF_CODE:-./build/tmp/deploy/images/qemu-amd64/OVMF/OVMF_CODE_4M.fd}
>>   
>>   				${QEMU_PATH}${QEMU} \
>>   					-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
>>   					-drive if=pflash,format=raw,unit=0,readonly=on,file=${ovmf_code} \
>> -					${QEMU_COMMON_OPTIONS} "$@"
>> +					${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
>>   			fi
>>   			;;
>>   		arm64|aarch64|arm|armhf)
>> @@ -174,7 +191,7 @@ if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
>>   			${QEMU_PATH}${QEMU} \
>>   				-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
>>   				-bios ${u_boot_bin} \
>> -				${QEMU_COMMON_OPTIONS} "$@"
>> +				${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
>>   			;;
>>   		rv64|riscv64)
>>   			opensbi_bin=${FIRMWARE_BIN:-./build/tmp/deploy/images/qemu-${QEMU_ARCH}/fw_payload.bin}
>> @@ -199,5 +216,5 @@ else
>>   			-drive file=${IMAGE_FILE},discard=unmap,if=none,id=disk,format=raw \
>>   			-kernel ${KERNEL_FILE} -append "${KERNEL_CMDLINE}" \
>>   			-initrd ${INITRD_FILE} \
>> -			${QEMU_COMMON_OPTIONS} "$@"
>> +			${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
>>   fi
> 

Re: [cip-dev][isar-cip-core][PATCH v6 3/7] start-qemu.sh: Create a tpm2 device

[Jan Kiszka]

On 13.03.23 09:13, Gylstorff Quirin wrote:
> 
> 
> On 3/13/23 08:08, Jan Kiszka wrote:
>> On 09.03.23 11:28, Quirin Gylstorff wrote:
>>> From: Quirin Gylstorff <quirin.gylstorff@siemens.com>
>>>
>>> This allows testing the partition encryption with qemu.
>>>
>>> Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
>>> ---
>>>   start-qemu.sh | 27 ++++++++++++++++++++++-----
>>>   1 file changed, 22 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/start-qemu.sh b/start-qemu.sh
>>> index fcfbc5b..b46b066 100755
>>> --- a/start-qemu.sh
>>> +++ b/start-qemu.sh
>>> @@ -28,6 +28,9 @@ if grep -s -q "IMAGE_SECURE_BOOT: true"
>>> .config.yaml; then
>>>   elif grep -s -q "IMAGE_SWUPDATE: true" .config.yaml; then
>>>       SWUPDATE_BOOT="true"
>>>   fi
>>> +if grep -s -q "IMAGE_DATA_ENCRYPTION: true" .config.yaml; then
>>> +    TPM2_ENCRYPTION="true"
>>> +fi
>>>     if [ -n "${QEMU_PATH}" ]; then
>>>       QEMU_PATH="${QEMU_PATH}/"
>>> @@ -143,7 +146,21 @@ QEMU_COMMON_OPTIONS=" \
>>>       -m 1G \
>>>       -serial mon:stdio \
>>>       -netdev user,id=net,hostfwd=tcp:127.0.0.1:22222-:22 \
>>> -    ${QEMU_EXTRA_ARGS}"
>>> +    "
>>> +
>>> +if [ "$TPM2_ENCRYPTION" = "true" ] && [ -x /usr/bin/swtpm ]; then
>>> +    swtpm_dir="/tmp/qemu-swtpm"
>>> +    mkdir -p "${swtpm_dir}"
>>> +    rm "${swtpm_dir}"/*
>>
>> This kills the previous TPM state, preventing to power-cycle the VM. We
>> rather need to persist it aside the disk image. I'm massaging the script
>> in that direction.
>>
> 
> This was for debugging purposes as the TPM is no longer accessible after
> a number of keys entered.
> 

At least it is possible to encrypt a new image using the TPM state of a
previous run, just tested. In which cases exactly does this issue hurt?

Jan

-- 
Siemens AG, Technology
Competence Center Embedded Linux

Re: [cip-dev][isar-cip-core][PATCH v6 3/7] start-qemu.sh: Create a tpm2 device

[Gylstorff Quirin]

On 3/13/23 10:13, Jan Kiszka wrote:
> On 13.03.23 09:13, Gylstorff Quirin wrote:
>>
>>
>> On 3/13/23 08:08, Jan Kiszka wrote:
>>> On 09.03.23 11:28, Quirin Gylstorff wrote:
>>>> From: Quirin Gylstorff <quirin.gylstorff@siemens.com>
>>>>
>>>> This allows testing the partition encryption with qemu.
>>>>
>>>> Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
>>>> ---
>>>>    start-qemu.sh | 27 ++++++++++++++++++++++-----
>>>>    1 file changed, 22 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/start-qemu.sh b/start-qemu.sh
>>>> index fcfbc5b..b46b066 100755
>>>> --- a/start-qemu.sh
>>>> +++ b/start-qemu.sh
>>>> @@ -28,6 +28,9 @@ if grep -s -q "IMAGE_SECURE_BOOT: true"
>>>> .config.yaml; then
>>>>    elif grep -s -q "IMAGE_SWUPDATE: true" .config.yaml; then
>>>>        SWUPDATE_BOOT="true"
>>>>    fi
>>>> +if grep -s -q "IMAGE_DATA_ENCRYPTION: true" .config.yaml; then
>>>> +    TPM2_ENCRYPTION="true"
>>>> +fi
>>>>      if [ -n "${QEMU_PATH}" ]; then
>>>>        QEMU_PATH="${QEMU_PATH}/"
>>>> @@ -143,7 +146,21 @@ QEMU_COMMON_OPTIONS=" \
>>>>        -m 1G \
>>>>        -serial mon:stdio \
>>>>        -netdev user,id=net,hostfwd=tcp:127.0.0.1:22222-:22 \
>>>> -    ${QEMU_EXTRA_ARGS}"
>>>> +    "
>>>> +
>>>> +if [ "$TPM2_ENCRYPTION" = "true" ] && [ -x /usr/bin/swtpm ]; then
>>>> +    swtpm_dir="/tmp/qemu-swtpm"
>>>> +    mkdir -p "${swtpm_dir}"
>>>> +    rm "${swtpm_dir}"/*
>>>
>>> This kills the previous TPM state, preventing to power-cycle the VM. We
>>> rather need to persist it aside the disk image. I'm massaging the script
>>> in that direction.
>>>
>>
>> This was for debugging purposes as the TPM is no longer accessible after
>> a number of keys entered.
>>
> 
> At least it is possible to encrypt a new image using the TPM state of a
> previous run, just tested. In which cases exactly does this issue hurt?

After creating 8 keys/Images the 9th time you want to add a key to a new 
the TPM will throw a error.

Quirin

> 
> Jan
> 

Re: [cip-dev][isar-cip-core][PATCH v6 3/7] start-qemu.sh: Create a tpm2 device

[Jan Kiszka]

On 13.03.23 11:29, Gylstorff Quirin wrote:
> 
> 
> On 3/13/23 10:13, Jan Kiszka wrote:
>> On 13.03.23 09:13, Gylstorff Quirin wrote:
>>>
>>>
>>> On 3/13/23 08:08, Jan Kiszka wrote:
>>>> On 09.03.23 11:28, Quirin Gylstorff wrote:
>>>>> From: Quirin Gylstorff <quirin.gylstorff@siemens.com>
>>>>>
>>>>> This allows testing the partition encryption with qemu.
>>>>>
>>>>> Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
>>>>> ---
>>>>>    start-qemu.sh | 27 ++++++++++++++++++++++-----
>>>>>    1 file changed, 22 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/start-qemu.sh b/start-qemu.sh
>>>>> index fcfbc5b..b46b066 100755
>>>>> --- a/start-qemu.sh
>>>>> +++ b/start-qemu.sh
>>>>> @@ -28,6 +28,9 @@ if grep -s -q "IMAGE_SECURE_BOOT: true"
>>>>> .config.yaml; then
>>>>>    elif grep -s -q "IMAGE_SWUPDATE: true" .config.yaml; then
>>>>>        SWUPDATE_BOOT="true"
>>>>>    fi
>>>>> +if grep -s -q "IMAGE_DATA_ENCRYPTION: true" .config.yaml; then
>>>>> +    TPM2_ENCRYPTION="true"
>>>>> +fi
>>>>>      if [ -n "${QEMU_PATH}" ]; then
>>>>>        QEMU_PATH="${QEMU_PATH}/"
>>>>> @@ -143,7 +146,21 @@ QEMU_COMMON_OPTIONS=" \
>>>>>        -m 1G \
>>>>>        -serial mon:stdio \
>>>>>        -netdev user,id=net,hostfwd=tcp:127.0.0.1:22222-:22 \
>>>>> -    ${QEMU_EXTRA_ARGS}"
>>>>> +    "
>>>>> +
>>>>> +if [ "$TPM2_ENCRYPTION" = "true" ] && [ -x /usr/bin/swtpm ]; then
>>>>> +    swtpm_dir="/tmp/qemu-swtpm"
>>>>> +    mkdir -p "${swtpm_dir}"
>>>>> +    rm "${swtpm_dir}"/*
>>>>
>>>> This kills the previous TPM state, preventing to power-cycle the VM. We
>>>> rather need to persist it aside the disk image. I'm massaging the
>>>> script
>>>> in that direction.
>>>>
>>>
>>> This was for debugging purposes as the TPM is no longer accessible after
>>> a number of keys entered.
>>>
>>
>> At least it is possible to encrypt a new image using the TPM state of a
>> previous run, just tested. In which cases exactly does this issue hurt?
> 
> After creating 8 keys/Images the 9th time you want to add a key to a new
> the TPM will throw a error.
> 

So, every boot-strap of a new image will add one key, and that will
start to fail after the 8th time. Then we should purge the newly created
subfolder in deploydir when performing an image deployment.

Jan

-- 
Siemens AG, Technology
Competence Center Embedded Linux

[isar-cip-core][PATCH v7 3/7] start-qemu.sh: Create a tpm2 device

[Jan Kiszka]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

This allows testing the partition encryption with qemu.

Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
[Jan: persist swtpm state aside image in deploy dir]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---

This one became quite different, so sending it as v7.

 start-qemu.sh | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/start-qemu.sh b/start-qemu.sh
index fcfbc5b7..44fb4196 100755
--- a/start-qemu.sh
+++ b/start-qemu.sh
@@ -28,6 +28,9 @@ if grep -s -q "IMAGE_SECURE_BOOT: true" .config.yaml; then
 elif grep -s -q "IMAGE_SWUPDATE: true" .config.yaml; then
 	SWUPDATE_BOOT="true"
 fi
+if grep -s -q "IMAGE_DATA_ENCRYPTION: true" .config.yaml; then
+	TPM2_ENCRYPTION="true"
+fi
 
 if [ -n "${QEMU_PATH}" ]; then
 	QEMU_PATH="${QEMU_PATH}/"
@@ -129,7 +132,8 @@ case "${arch}" in
 		;;
 esac
 
-IMAGE_PREFIX="$(dirname $0)/build/tmp/deploy/images/qemu-${QEMU_ARCH}/${TARGET_IMAGE}-cip-core-${DISTRO_RELEASE}-qemu-${QEMU_ARCH}${TEST_IMAGE}"
+BASE_DIR=$(readlink -f $(dirname $0))
+IMAGE_PREFIX="${BASE_DIR}/build/tmp/deploy/images/qemu-${QEMU_ARCH}/${TARGET_IMAGE}-cip-core-${DISTRO_RELEASE}-qemu-${QEMU_ARCH}${TEST_IMAGE}"
 
 if [ -z "${DISPLAY}" ]; then
 	QEMU_EXTRA_ARGS="${QEMU_EXTRA_ARGS} -nographic"
@@ -143,7 +147,20 @@ QEMU_COMMON_OPTIONS=" \
 	-m 1G \
 	-serial mon:stdio \
 	-netdev user,id=net,hostfwd=tcp:127.0.0.1:22222-:22 \
-	${QEMU_EXTRA_ARGS}"
+	"
+
+if [ "$TPM2_ENCRYPTION" = "true" ] && [ -x /usr/bin/swtpm ]; then
+	SWTPM_DIR="${IMAGE_PREFIX}.swtpm"
+	mkdir -p "${SWTPM_DIR}"
+	if swtpm socket -d --tpmstate dir="${SWTPM_DIR}" \
+			 --ctrl type=unixio,path=/tmp/qemu-swtpm.sock \
+			 --tpm2; then
+		QEMU_EXTRA_ARGS="${QEMU_EXTRA_ARGS} \
+			 -chardev socket,id=chrtpm,path=/tmp/qemu-swtpm.sock \
+			 -tpmdev emulator,id=tpm0,chardev=chrtpm \
+			 -device tpm-tis,tpmdev=tpm0"
+	fi
+fi
 
 if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
 	case "${arch}" in
@@ -158,14 +175,14 @@ if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
 					-drive if=pflash,format=raw,unit=0,readonly=on,file=${ovmf_code} \
 					-drive if=pflash,format=raw,file=${ovmf_vars} \
 					-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
-					${QEMU_COMMON_OPTIONS} "$@"
+					${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
 			else
 				ovmf_code=${OVMF_CODE:-./build/tmp/deploy/images/qemu-amd64/OVMF/OVMF_CODE_4M.fd}
 
 				${QEMU_PATH}${QEMU} \
 					-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
 					-drive if=pflash,format=raw,unit=0,readonly=on,file=${ovmf_code} \
-					${QEMU_COMMON_OPTIONS} "$@"
+					${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
 			fi
 			;;
 		arm64|aarch64|arm|armhf)
@@ -174,7 +191,7 @@ if [ -n "${SECURE_BOOT}${SWUPDATE_BOOT}" ]; then
 			${QEMU_PATH}${QEMU} \
 				-drive file=${IMAGE_PREFIX}.wic,discard=unmap,if=none,id=disk,format=raw \
 				-bios ${u_boot_bin} \
-				${QEMU_COMMON_OPTIONS} "$@"
+				${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
 			;;
 		rv64|riscv64)
 			opensbi_bin=${FIRMWARE_BIN:-./build/tmp/deploy/images/qemu-${QEMU_ARCH}/fw_payload.bin}
@@ -199,5 +216,5 @@ else
 			-drive file=${IMAGE_FILE},discard=unmap,if=none,id=disk,format=raw \
 			-kernel ${KERNEL_FILE} -append "${KERNEL_CMDLINE}" \
 			-initrd ${INITRD_FILE} \
-			${QEMU_COMMON_OPTIONS} "$@"
+			${QEMU_COMMON_OPTIONS} ${QEMU_EXTRA_ARGS} "$@"
 fi
-- 
2.35.3

[cip-dev][isar-cip-core][PATCH v6 4/7] Add initramfs hook to encrypt a partition

[Quirin Gylstorff]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

This creates a new luks encrypted ext4 partition with a the
key stored in the tpm2.

The initial key is randomly generated and removed from the
LUKS partition. Therefore a new key cannot be added by the user
and if the LUKS header is corrupted the data is no longer readable.

Add extra-space to /var and /home as the partition size are reduced if
they are encrypted.

Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
---
 kas/opt/encrypt-partitions.yml                |   3 +-
 .../cip-core-initramfs/cip-core-initramfs.bb  |   2 +
 .../files/encrypt_partition.env.tmpl          |   2 +
 .../files/encrypt_partition.hook              |  53 +++++++
 .../files/encrypt_partition.script            | 145 ++++++++++++++++++
 .../initramfs-crypt-hook_0.1.bb               |  40 +++++
 wic/x86-efibootguard.wks.in                   |   5 +-
 7 files changed, 247 insertions(+), 3 deletions(-)
 create mode 100644 recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.env.tmpl
 create mode 100644 recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.hook
 create mode 100644 recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.script
 create mode 100644 recipes-initramfs/initramfs-crypt-hook/initramfs-crypt-hook_0.1.bb

diff --git a/kas/opt/encrypt-partitions.yml b/kas/opt/encrypt-partitions.yml
index 1f91c0c..f6baf9f 100644
--- a/kas/opt/encrypt-partitions.yml
+++ b/kas/opt/encrypt-partitions.yml
@@ -16,5 +16,6 @@ local_conf_header:
   systemd-cryptenroll: |
     DISTRO_APT_SOURCES:append:bullseye = " conf/distro/debian-bullseye-backports.list"
     DISTRO_APT_PREFERENCES:append:bullseye = " conf/distro/preferences.bullseye-backports.tpm.conf"
-
+  initramfs-option-encrypt-partitions: |
+    OVERRIDES .= ":encrypt-partitions"
 
diff --git a/recipes-initramfs/cip-core-initramfs/cip-core-initramfs.bb b/recipes-initramfs/cip-core-initramfs/cip-core-initramfs.bb
index 2935ed8..0e4cf74 100644
--- a/recipes-initramfs/cip-core-initramfs/cip-core-initramfs.bb
+++ b/recipes-initramfs/cip-core-initramfs/cip-core-initramfs.bb
@@ -14,3 +14,5 @@ inherit initramfs
 INITRAMFS_INSTALL += " \
     initramfs-overlay-hook \
     "
+
+INITRAMFS_INSTALL:append:encrypt-partitions = " initramfs-crypt-hook"
diff --git a/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.env.tmpl b/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.env.tmpl
new file mode 100644
index 0000000..d04be56
--- /dev/null
+++ b/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.env.tmpl
@@ -0,0 +1,2 @@
+PARTITIONS="${CRYPT_PARTITIONS}"
+CREATE_FILE_SYSTEM_CMD="${CRYPT_CREATE_FILE_SYSTEM_CMD}"
diff --git a/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.hook b/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.hook
new file mode 100644
index 0000000..2deee80
--- /dev/null
+++ b/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.hook
@@ -0,0 +1,53 @@
+#!/bin/sh
+# Copyright (C) Siemens AG, 2020-2022
+#
+# SPDX-License-Identifier: MIT
+
+PREREQ=""
+
+prereqs()
+{
+     echo "$PREREQ"
+}
+
+case $1 in
+prereqs)
+     prereqs
+     exit 0
+     ;;
+esac
+
+. /usr/share/initramfs-tools/hook-functions
+
+hook_error() {
+    echo "(ERROR): $2" >&2
+    exit 1
+}
+
+manual_add_modules tpm
+manual_add_modules tpm_tis_core
+manual_add_modules tpm_tis
+manual_add_modules tpm_crb
+manual_add_modules dm_mod
+manual_add_modules dm_crypt
+
+copy_exec /usr/bin/openssl || hook_error "/usr/bin/openssl not found"
+copy_exec /usr/sbin/mke2fs || hook_error "/usr/sbin/mke2fs not found"
+copy_exec /usr/bin/grep || hook_error "/usr/bin/grep not found"
+copy_exec /usr/bin/awk || hook_error "/usr/bin/awk not found"
+copy_exec /usr/bin/expr || hook_error "/usr/bin/expr not found"
+copy_exec /usr/sbin/e2fsck || hook_error "/usr/sbin/e2fsck not found"
+copy_exec /usr/sbin/resize2fs || hook_error "/usr/sbin/resize2fs not found"
+copy_exec /usr/sbin/cryptsetup || hook_error "/usr/sbin/cryptsetup not found"
+copy_exec /usr/bin/systemd-cryptenroll || hook_error "/usr/bin/systemd-cryptenroll not found"
+copy_exec /usr/lib/systemd/systemd-cryptsetup || hook_error "/usr/lib/systemd/systemd-cryptsetup not found"
+
+if [ -x cryptsetup-reencrypt ]; then
+    copy_exec /usr/sbin/cryptsetup-reencrypt
+fi
+
+for _LIBRARY in /usr/lib/*/libtss2*; do
+    copy_exec "$_LIBRARY"
+done
+
+copy_file library /usr/share/encrypt_partition/encrypt_partition.env /usr/share/encrypt_partition/encrypt_partition.env
diff --git a/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.script b/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.script
new file mode 100644
index 0000000..468b308
--- /dev/null
+++ b/recipes-initramfs/initramfs-crypt-hook/files/encrypt_partition.script
@@ -0,0 +1,145 @@
+#!/bin/sh
+#
+# CIP Core, generic profile
+#
+# Copyright (c) Siemens AG, 2023
+#
+# Authors:
+#  Quirin Gylstorff <quirin.gylstorff@siemens.com>
+#
+# SPDX-License-Identifier: MIT
+prereqs()
+{
+	# Make sure that this script is run last in local-top
+	local req
+	for req in "${0%/*}"/*; do
+		script="${req##*/}"
+		if [ "$script" != "${0##*/}" ]; then
+			printf '%s\n' "$script"
+		fi
+	done
+}
+case $1 in
+prereqs)
+	prereqs
+	exit 0
+	;;
+esac
+
+. /scripts/functions
+
+# get configuration variables
+. /usr/share/encrypt_partition/encrypt_partition.env
+
+# load necessary kernel modules:
+modprobe tpm_tis
+modprobe tpm_crb
+
+# fixed tpm device or do we need to find it
+tpm_device=/dev/tpmrm0
+partition_sets="$PARTITIONS"
+create_file_system_cmd="$CREATE_FILE_SYSTEM_CMD"
+
+if [ -z "${create_file_system_cmd}" ]; then
+	create_file_system_cmd = "mke2fs -t ext4"
+fi
+
+open_tpm2_partition() {
+	if ! /usr/lib/systemd/systemd-cryptsetup attach "$crypt_mount_name" \
+		 "$1" - tpm2-device="$tpm_device"; then
+		panic "Can't decrypt '$1' !"
+	fi
+}
+
+enroll_tpm2_token() {
+	#check systemd version and export password if necessary
+	if [ -x /usr/bin/systemd-cryptenroll ]; then
+		systemd_version=$(systemd-cryptenroll --version | \
+			  awk -F " " 'NR==1{print $2 }')
+		#check systemd version and export password if necessary
+		if [ "$systemd_version" -ge "251" ]; then
+			PASSWORD=$(cat "$2" )
+			export PASSWORD
+			/usr/bin/systemd-cryptenroll --tpm2-device="$tpm_device" \
+				 --tpm2-pcrs=7 "$1"
+			PASSWORD=
+		else
+			panic "Unknown systemd version: '$systemd_version'!"
+		fi
+	else
+		panic "systemd-cryptenroll not available cannot enroll tpm2 key!"
+	fi
+}
+
+reencrypt_existing_partition() {
+	part_device=$(readlink -f "$partition")
+	part_size_blocks=$(cat /sys/class/block/"$(awk -v dev=$part_device 'BEGIN{split(dev,a,"/"); print a[3]}' )"/size)
+	# reduce the filesystem and partition by 32M to fit the LUKS header
+	reduce_device_size=32768
+	reduced_size=$(expr $part_size_blocks - 65536 )
+	reduced_size_in_byte=$(expr $reduced_size \* 512)
+	reduced_size_in_kb=$(expr $reduced_size_in_byte / 1024)K
+	resize2fs "$1" "${reduced_size_in_kb}"
+	if [ -x cryptsetup-reencrypt ]; then
+		/usr/sbin/cryptsetup-reencrypt --new --reduce-device-size "$reduce_device_size"k $1 < $2
+	else
+		/usr/sbin/cryptsetup reencrypt --encrypt --reduce-device-size "$reduce_device_size"k $1 < $2
+	fi
+
+}
+
+if [ ! -e "$tpm_device" ]; then
+	panic "tpm device '$tpm_device' does not exists - cannot create a encrypted device!"
+fi
+
+for partition_set in $partition_sets; do
+	partition_label=$(awk -v var=$partition_set 'BEGIN{split(var,a,":"); print a[1]}')
+	partition_mountpoint=$(awk -v var=$partition_set 'BEGIN{split(var,a,":"); print a[2]}')
+	partition_format=$(awk -v var=$partition_set 'BEGIN{split(var,a,":"); print a[3]}')
+	partition=/dev/disk/by-partlabel/$partition_label
+	crypt_mount_name="encrypted_$partition_label"
+	decrypted_part=/dev/mapper/"$crypt_mount_name"
+
+	# check if partition is already encrypted with systemd-tpm2
+	if /usr/sbin/cryptsetup luksDump --batch-mode "$partition" \
+			| grep -q "systemd-tpm2"; then
+		open_tpm2_partition "$partition"
+		if ! mount -t $(get_fstype "${decrypted_part}") "${decrypted_part}" \
+			 "${rootmnt}${partition_mountpoint}"; then
+			panic "Can't mount encrypted partition '${decrypted_part}'!"
+		fi
+		continue
+	fi
+
+	# create random password for initial encryption
+	# this will be dropped after reboot
+	tmp_key=/tmp/"$partition_label-lukskey"
+	openssl rand -base64 32 > "$tmp_key"
+
+	case "${partition_format}" in
+		"reencrypt")
+			reencrypt_existing_partition "$partition" "$tmp_key"
+			enroll_tpm2_token "$partition" "$tmp_key"
+			open_tpm2_partition "$partition"
+		;;
+		"format")
+			/usr/sbin/cryptsetup luksFormat --batch-mode \
+				 --type luks2 "$partition" < "$tmp_key"
+			enroll_tpm2_token "$partition" "$tmp_key"
+			open_tpm2_partition_tpm2_partition "$partition"
+			eval "${create_file_system_cmd} ${decrypted_part}"
+		;;
+		*)
+			panic "Unknown value ${partition_format}. Cannot create a encrypted partition !"
+		 ;;
+	esac
+
+	if ! mount -t $(get_fstype "${decrypted_part}") "${decrypted_part}" \
+		 "${rootmnt}${partition_mountpoint}"; then
+		panic "Can't mount encrypted partition '${decrypted_part}'!"
+	fi
+
+	# delete initial key
+	# afterwards no new keys can be enrolled
+	/usr/bin/systemd-cryptenroll "$partition" --wipe-slot=0
+done
diff --git a/recipes-initramfs/initramfs-crypt-hook/initramfs-crypt-hook_0.1.bb b/recipes-initramfs/initramfs-crypt-hook/initramfs-crypt-hook_0.1.bb
new file mode 100644
index 0000000..30c89a2
--- /dev/null
+++ b/recipes-initramfs/initramfs-crypt-hook/initramfs-crypt-hook_0.1.bb
@@ -0,0 +1,40 @@
+#
+# CIP Core, generic profile
+#
+# Copyright (c) Siemens AG, 2020-2022
+#
+# Authors:
+#  Quirin Gylstorff <quirin.gylstorff@siemens.com>
+#
+# SPDX-License-Identifier: MIT
+
+
+inherit dpkg-raw
+
+DEBIAN_DEPENDS = "initramfs-tools, cryptsetup, systemd(>= 251), \
+    awk, openssl, libtss2-esys-3.0.2-0, libtss2-rc0, libtss2-mu0, e2fsprogs"
+
+SRC_URI += "file://encrypt_partition.hook \
+            file://encrypt_partition.script \
+            file://encrypt_partition.env.tmpl"
+
+# CRYPT_PARTITIONS elements are <partition-label>:<mountpoint>:<reencrypt or format>
+CRYPT_PARTITIONS ??= "home:/home:reencrypt var:/var:reencrypt"
+# CRYPT_CREATE_FILE_SYSTEM_CMD contains the shell command to create the filesystem
+# in a newly formatted LUKS Partition
+CRYPT_CREATE_FILE_SYSTEM_CMD ??= "mke2fs -t ext4"
+
+TEMPLATE_VARS = "CRYPT_PARTITIONS CRYPT_CREATE_FILE_SYSTEM_CMD"
+TEMPLATE_FILES = "encrypt_partition.env.tmpl"
+
+do_install[cleandirs] += " \
+    ${D}/usr/share/initramfs-tools/hooks \
+    ${D}/usr/share/encrypt_partition \
+    ${D}/usr/share/initramfs-tools/scripts/local-bottom"
+do_install() {
+    install -m 0600 "${WORKDIR}/encrypt_partition.env" "${D}/usr/share/encrypt_partition/encrypt_partition.env"
+    install -m 0755 "${WORKDIR}/encrypt_partition.script" \
+        "${D}/usr/share/initramfs-tools/scripts/local-bottom/encrypt_partition"
+    install -m 0755 "${WORKDIR}/encrypt_partition.hook" \
+        "${D}/usr/share/initramfs-tools/hooks/encrypt_partition"
+}
diff --git a/wic/x86-efibootguard.wks.in b/wic/x86-efibootguard.wks.in
index b635a8b..24b4387 100644
--- a/wic/x86-efibootguard.wks.in
+++ b/wic/x86-efibootguard.wks.in
@@ -7,7 +7,8 @@ part --source rawcopy --sourceparams "file=${IMAGE_FULLNAME}.squashfs" --align 1
 part --source empty --align 1024 --fixed-size 1G --uuid "${ABROOTFS_PART_UUID_B}"
 
 # home and var are extra partitions
-part /home --source rootfs --rootfs-dir=${IMAGE_ROOTFS}/home --fstype=ext4 --label home --align 1024  --size 1G
-part /var --source rootfs --rootfs-dir=${IMAGE_ROOTFS}/var --fstype=ext4 --label var --align 1024  --size 2G
+
+part /home --source rootfs --rootfs-dir=${IMAGE_ROOTFS}/home --fstype=ext4 --label home --align 1024  --size 1G --extra-space=100M 
+part /var --source rootfs --rootfs-dir=${IMAGE_ROOTFS}/var --fstype=ext4 --label var --align 1024  --size 2G --extra-space=100M
 
 bootloader --ptable gpt --append="console=tty0 console=ttyS0,115200 rootwait earlyprintk"
-- 
2.39.2

[cip-dev][isar-cip-core][PATCH v6 5/7] overlay: add prerequisite 'encrypt_partition'

[Quirin Gylstorff]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

If /var shall be encrypted encrypt_partition needs to be executed
before the overlay script.

If the prerequisite is not available the overlay script will be executed.

Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
---
 .../initramfs-overlay-hook/files/overlay.hook        |  1 +
 .../initramfs-overlay-hook/files/overlay.script.tmpl | 12 +++++++-----
 .../initramfs-overlay-hook_0.1.bb                    |  2 +-
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/recipes-initramfs/initramfs-overlay-hook/files/overlay.hook b/recipes-initramfs/initramfs-overlay-hook/files/overlay.hook
index 5bec258..8b00ecf 100644
--- a/recipes-initramfs/initramfs-overlay-hook/files/overlay.hook
+++ b/recipes-initramfs/initramfs-overlay-hook/files/overlay.hook
@@ -23,4 +23,5 @@ esac
 . /usr/share/initramfs-tools/hook-functions
 
 manual_add_modules overlay
+copy_exec /usr/bin/mountpoint
 copy_exec /usr/bin/awk
diff --git a/recipes-initramfs/initramfs-overlay-hook/files/overlay.script.tmpl b/recipes-initramfs/initramfs-overlay-hook/files/overlay.script.tmpl
index 87ec72f..71d2599 100644
--- a/recipes-initramfs/initramfs-overlay-hook/files/overlay.script.tmpl
+++ b/recipes-initramfs/initramfs-overlay-hook/files/overlay.script.tmpl
@@ -9,7 +9,7 @@
 #  Quirin Gylstorff <quirin.gylstorff@siemens.com>
 #
 
-PREREQ=""
+PREREQ="encrypt_partition"
 
 prereqs()
 {
@@ -33,10 +33,12 @@ ovl_lower_dirs="${INITRAMFS_OVERLAY_PATHS}"
 
 root_mount_storage=${rootmnt}${ovl_storage_path}
 
-if ! mount -t $(get_fstype /dev/disk/by-label/${ovl_partition_label}) \
-	   /dev/disk/by-label/${ovl_partition_label} \
-	   ${rootmnt}/${ovl_partition_label}; then
-	panic "Can't mount /${ovl_partition_label} partition - overlay will not work!"
+if ! mountpoint -q "${rootmnt}/${ovl_partition_label}"; then
+	if ! mount -t $(get_fstype /dev/disk/by-label/${ovl_partition_label}) \
+		 /dev/disk/by-label/${ovl_partition_label} \
+		 ${rootmnt}/${ovl_partition_label}; then
+		panic "Can't mount /${ovl_partition_label} partition - overlay will not work!"
+	fi
 fi
 
 for ovl_lower_dir in ${ovl_lower_dirs}; do
diff --git a/recipes-initramfs/initramfs-overlay-hook/initramfs-overlay-hook_0.1.bb b/recipes-initramfs/initramfs-overlay-hook/initramfs-overlay-hook_0.1.bb
index 78831ba..566bd15 100644
--- a/recipes-initramfs/initramfs-overlay-hook/initramfs-overlay-hook_0.1.bb
+++ b/recipes-initramfs/initramfs-overlay-hook/initramfs-overlay-hook_0.1.bb
@@ -26,7 +26,7 @@ TEMPLATE_VARS += " INITRAMFS_OVERLAY_STORAGE_PATH \
     INITRAMFS_OVERLAY_PATHS \
     INITRAMFS_OVERLAY_STORAGE_PARTITION_LABEL"
 
-DEBIAN_DEPENDS = "initramfs-tools, awk, coreutils"
+DEBIAN_DEPENDS = "initramfs-tools, awk, coreutils, util-linux"
 
 do_install[cleandirs] += " \
     ${D}/usr/share/initramfs-tools/hooks \
-- 
2.39.2

[cip-dev][isar-cip-core][PATCH v6 6/7] .gitlabci: Add ci build

[Quirin Gylstorff]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
---
 .gitlab-ci.yml | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index f51b64b..1921183 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -19,6 +19,7 @@ variables:
   release: bullseye
   extension: none
   use_rt: enable
+  tpm: disable
   wic_targz: enable
   targz: disable
   dtb: none
@@ -55,6 +56,7 @@ default:
     - if [ "${release}" = "buster" ]; then base_yaml="${base_yaml}:kas/opt/buster.yml"; fi
     - if [ "${release}" = "bullseye" ]; then base_yaml="${base_yaml}:kas/opt/bullseye.yml"; fi
     - if [ "${release}" = "sid-ports" ]; then base_yaml="${base_yaml}:kas/opt/sid-ports.yml"; fi
+    - if [ "${tpm}" = "enable" ]; then base_yaml="${base_yaml}:kas/opt/encrypt-partitions.yml"; fi
     - echo "Building ${base_yaml}"
     - kas build ${base_yaml}
     - if [ "${deploy}" = "enable" ]; then scripts/deploy-cip-core.sh ${release} ${target} ${extension} ${dtb} ${CI_COMMIT_REF_SLUG}; fi
@@ -224,6 +226,17 @@ build:qemu-amd64-secure-boot:
     wic_targz: disable
     deploy: disable
 
+build:qemu-amd64-secure-boot-tpm:
+  extends:
+    - .build_base
+  variables:
+    target: qemu-amd64
+    extension: ebg-secure-boot-snakeoil
+    use_rt: disable
+    wic_targz: disable
+    deploy: disable
+    tpm: enable
+
 build:qemu-amd64-swupdate:
   extends:
     - .build_base
-- 
2.39.2

[cip-dev][isar-cip-core][PATCH v6 7/7] Add README for encrypted partitions

[Quirin Gylstorff]

From: Quirin Gylstorff <quirin.gylstorff@siemens.com>

Signed-off-by: Quirin Gylstorff <quirin.gylstorff@siemens.com>
---
 doc/README.tpm2.encryption.md | 55 +++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 doc/README.tpm2.encryption.md

diff --git a/doc/README.tpm2.encryption.md b/doc/README.tpm2.encryption.md
new file mode 100644
index 0000000..58ebb8a
--- /dev/null
+++ b/doc/README.tpm2.encryption.md
@@ -0,0 +1,55 @@
+# Encrypted Partitions
+
+By adding the recipe `initramfs-crypt-hook` to the initramfs build user defined partitions will be
+encrypted during first boot. The encrypted partition is a LUKS partition and uses a TPM to secure the
+passphrase on the device.
+
+## Requirements
+
+To enroll the keys Debian 12(bookworm) or Debian 11(bullseye) with backports is required. 
+The implementation in Debian 11 is for *demonstration purpose only* as we need backports for
+systemd >= 248. [systemd version 248](https://github.com/systemd/systemd/blob/a41ac8ac407a1a58612059a45229f0d440f58e28/NEWS#L3391) adds the necessary systemd-cryptenroll functionality.
+
+Testing with qemu-amd64 requires the package `swtpm`. Under Debian/Ubuntu this can be installed
+
+``` shell
+apt-get install swtpm
+```
+
+## TPM2 protected LUKS passphrase
+
+The recipe `initramfs-crypt-hook` uses `systemd-cryptenroll` to enroll a TPM2 protected LUKS passphrase.
+The procedure for storing a key is described in [systemd/src/shared/tpm2-util.c](https://github.com/systemd/systemd/blob/0254e4d66af7aa893b31b2326335ded5dde48b51/src/shared/tpm2-util.c#L1395).
+
+## How to build an QEMU image with TPM encryption
+An example for qemu-amd64 can be build with by selecting the option after calling:
+
+```
+./kas-container menu
+```
+or by adding using the following command line build:
+
+```
+./kas-container build kas-cip.yml:kas/board/qemu-amd64.yml:kas/opt/ebg-swu.yml:kas/opt/tpm.yml
+```
+## initramfs-crypt-hook configuration
+
+The initramfs-crypt-hook recipe has the following variables which can be overwritten during image build:
+- CRYPT_PARTITIONS
+- CRYPT_CREATE_FILE_SYSTEM_CMD
+
+### CRYPT_PARTITIONS
+
+The variable `CRYPT_PARTITIONS` contains the information which partition shall be encrypted where to mount it.
+Each entry uses the schema `<partition-label>:<mountpoint>:<reencrypt or format>`.
+- The `partition-label` is used to identify the partition on the disk
+- The `mountpoint` is used mount the decrypted partition in the root file system
+- `reencrypt` uses `cryptsetup reencrypt` to encrypt the exiting content of the partition. This reduces the partition by 32MB and the file system by a similar amount
+- `format` creates a empty LUKS partition and creates a file system defined with the shell command given in `CRYPT_CREATE_FILE_SYSTEM_CMD`
+
+### CRYPT_CREATE_FILE_SYSTEM_CMD
+
+The variable `CRYPT_CREATE_FILE_SYSTEM_CMD` contains the command to create a new file system on a newly
+encrypted partition. The Default (`mke2fs -t ext4`) creates an ext4 partition.
+
+
-- 
2.39.2