[ANNOUNCE] Release v6.1.38-cip1 / First release of the CIP 6.1.y Linux kernel

[ANNOUNCE] Release v6.1.38-cip1 / First release of the CIP 6.1.y Linux kernel

[nobuhiro1.iwamatsu]

Hi all,

We releases v6.1.38-cip1, which is the first release of the CIP 6.1.y Linux kernel!
This is based on v6.1.38 with many additional updates for the Renesas ARM64 SoC and 
reference boards.

You can get this release via the git tree at:

  v6.1.38-cip1:
    repository:
      https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git
    branch:
      linux-6.1.y-cip
    commit hash:
      b75089afeb2c1427e22539443d7498b221bdeaf4
    added commits:
      cip: Add a number to the version suffix
      usb: gadget: udc: renesas_usb3: Fix RZ/V2M {modprobe,bind} error
      i2c: rzv2m: Disable the operation of unit in case of error
      i2c: rzv2m: Replace lowercase macros with static inline functions
      i2c: rzv2m: Drop extra space
      arm64: dts: renesas: r9a07g054: Add MTU3a node
      arm64: dts: renesas: r9a07g044: Add MTU3a node
      MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
      counter: Add Renesas RZ/G2L MTU3a counter driver
      Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
      mfd: Add Renesas RZ/G2L MTU3a core driver
      dt-bindings: timer: Document RZ/G2L MTU3a bindings
      clk: renesas: r9a07g044: Add MTU3a clock and reset entry
      arm64: dts: renesas: rzv2mevk2: Add uart0 pins
      serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
      serial: 8250_em: Use pseudo offset for UART_FCR
      serial: 8250_em: Use devm_clk_get_enabled()
      serial: 8250_em: Add missing break statement
      serial: 8250_em: Drop unused header file
      serial: 8250_em: Simplify probe()
      dt-bindings: usb: ti,hd3ss3220: Update interrupt property as optional
      arm64: dts: renesas: rzg2ul-smarc: Enable SCI0
      can: rcar_canfd: Add multi_channel_irqs to struct rcar_canfd_hw_info
      can: rcar_canfd: Add postdiv to struct rcar_canfd_hw_info
      can: rcar_canfd: Add shared_global_irqs to struct rcar_canfd_hw_info
      can: rcar_canfd: Add max_channels to struct rcar_canfd_hw_info
      tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
      tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
      tty: serial: sh-sci: Remove setting {src,dst}_{addr,addr_width} based on DMA direction
      tty: serial: sh-sci: Fix end of transmission on SCI
      tty: serial: sh-sci: Add support for tx end interrupt handling
      tty: serial: sh-sci: Fix TE setting on SCI IP
      arm64: defconfig: Enable RZ/V2M xHCI and USB3.1 DRD controller support
      arm64: dts: renesas: rzv2mevk2: Enable USB3 role switch
      arm64: dts: renesas: rzv2mevk2: Enable USB3 DRD, Peripheral and Host
      arm64: dts: renesas: r9a09g011: Add USB3 DRD, device and host nodes
      xhci: split out rcar/rz support from xhci-plat.c
      xhci: host: Add Renesas RZ/V2M SoC support
      usb: host: xhci-plat: Add reset support
      usb: host: xhci-plat: Improve clock handling in probe()
      usb: gadget: udc: renesas_usb3: Add role switch support for RZ/V2M
      usb: gadget: Add support for RZ/V2M USB3DRD driver
      dt-bindings: usb: Add RZ/V2M USB3DRD binding
      dt-bindings: usb: renesas,usb3-peri: Document RZ/V2MA bindings
      dt-bindings: usb: renesas,usb3-peri: Update reset, clock-name and interrupts properties
      dt-bindings: usb: renesas,usb-xhci: Document RZ/V2M support
      usb: typec: hd3ss3220: Add polling support
      clk: renesas: r9a09g011: Add USB clock and reset entries
      dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
      arm64: dts: renesas: rzv2mevk2: Enable watchdog
      arm64: dts: renesas: r9a09g011: Add watchdog node
      arm64: dts: renesas: r9a09g011: Add system controller node
      arm64: dts: renesas: r9a09g011: Add L2 Cache node
      arm64: dts: renesas: r9a09g011: Reword ethernet status
      clk: renesas: r9a09g011: Add TIM clock and reset entries
      arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes
      dmaengine: sh: rz-dmac: Remove unused rz_dmac_chan.*_word_size
      dmaengine: sh: rz-dmac: Add reset support
      dt-bindings: dma: rz-dmac: Document clock-names and reset-names
      soc: renesas: Identify RZ/V2M SoC
      dt-bindings: arm: renesas: Document Renesas RZ/V2M System Configuration
      pinctrl: renesas: rzg2l: remove unnecessary check from rzg2l_dt_node_to_map()
      can: rcar_canfd: rcar_canfd_probe: Add struct rcar_canfd_hw_info to driver data
      can: rcar_canfd: Use devm_reset_control_get_optional_exclusive
      clk: renesas: rzg2l: Support sd clk mux round operation
      Add configuration for gitlab-ci.

Best regards,
   Nobuhiro