* [Cocci] [PATCH 0/2 v2] Improve Coccinelle Parallelisation
@ 2020-10-06 19:04 Sumera Priyadarsini
2020-10-06 19:06 ` [Cocci] [PATCH 1/2 V2] scripts: coccicheck: Change default value for parallelism Sumera Priyadarsini
2020-10-06 19:06 ` [Cocci] [PATCH 2/2 V2] Documentation: Coccinelle: Modify parallelisation information in docs Sumera Priyadarsini
0 siblings, 2 replies; 3+ messages in thread
From: Sumera Priyadarsini @ 2020-10-06 19:04 UTC (permalink / raw)
To: Julia.Lawall
Cc: michal.lkml, linux-doc, Gilles.Muller, corbet, nicolas.palix,
linux-kernel, cocci
Coccinelle utilises all available threads to implement parallelisation.
However, this results in a decrease in performance.
This patchset aims to improve performance by modifying cocciccheck to
use at most one thread per core by default.
Sumera Priyadarsini (2):
scripts: coccicheck: Change default value for parallelism
Documentation: Coccinelle: Modify parallelisation information in docs
Documentation/dev-tools/coccinelle.rst | 4 ++--
scripts/coccicheck | 5 +++++
2 files changed, 7 insertions(+), 2 deletions(-)
--
2.25.1
_______________________________________________
Cocci mailing list
Cocci@systeme.lip6.fr
https://systeme.lip6.fr/mailman/listinfo/cocci
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Cocci] [PATCH 1/2 V2] scripts: coccicheck: Change default value for parallelism
2020-10-06 19:04 [Cocci] [PATCH 0/2 v2] Improve Coccinelle Parallelisation Sumera Priyadarsini
@ 2020-10-06 19:06 ` Sumera Priyadarsini
2020-10-06 19:06 ` [Cocci] [PATCH 2/2 V2] Documentation: Coccinelle: Modify parallelisation information in docs Sumera Priyadarsini
1 sibling, 0 replies; 3+ messages in thread
From: Sumera Priyadarsini @ 2020-10-06 19:06 UTC (permalink / raw)
To: Julia.Lawall
Cc: michal.lkml, linux-doc, Gilles.Muller, corbet, nicolas.palix,
linux-kernel, cocci
By default, coccicheck utilizes all available threads to implement
parallelisation. However, when all available threads are used,
a decrease in performance is noted. The elapsed time is minimum
when at most one thread per core is used.
For example, on benchmarking the semantic patch kfree.cocci for
usb/serial using hyperfine, the outputs obtained for J=5 and J=2
are 1.32 and 1.90 times faster than those for J=10 and J=9
respectively for two separate runs. For the larger drivers/staging
directory, minimium elapsed time is obtained for J=3 which is 1.86
times faster than that for J=12. The optimal J value does not
exceed 6 in any of the test runs. The benchmarks are run on a machine
with 6 cores, with 2 threads per core, i.e, 12 hyperthreads in all.
To improve performance, modify coccicheck to use at most only
one thread per core by default.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
---
Changes in V2:
- Change commit message as suggested by Julia Lawall
Changes in V3:
- Use J/2 as optimal value for machines with more
than 8 hyperthreads as well.
---
scripts/coccicheck | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/scripts/coccicheck b/scripts/coccicheck
index e04d328210ac..a72aa6c037ff 100755
--- a/scripts/coccicheck
+++ b/scripts/coccicheck
@@ -75,8 +75,13 @@ else
OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
fi
+ # Use only one thread per core by default if hyperthreading is enabled
+ THREADS_PER_CORE=$(lscpu | grep "Thread(s) per core: " | tr -cd [:digit:])
if [ -z "$J" ]; then
NPROC=$(getconf _NPROCESSORS_ONLN)
+ if [ $THREADS_PER_CORE -gt 1 -a $NPROC -gt 2 ] ; then
+ NPROC=$((NPROC/2))
+ fi
else
NPROC="$J"
fi
--
2.25.1
_______________________________________________
Cocci mailing list
Cocci@systeme.lip6.fr
https://systeme.lip6.fr/mailman/listinfo/cocci
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Cocci] [PATCH 2/2 V2] Documentation: Coccinelle: Modify parallelisation information in docs
2020-10-06 19:04 [Cocci] [PATCH 0/2 v2] Improve Coccinelle Parallelisation Sumera Priyadarsini
2020-10-06 19:06 ` [Cocci] [PATCH 1/2 V2] scripts: coccicheck: Change default value for parallelism Sumera Priyadarsini
@ 2020-10-06 19:06 ` Sumera Priyadarsini
1 sibling, 0 replies; 3+ messages in thread
From: Sumera Priyadarsini @ 2020-10-06 19:06 UTC (permalink / raw)
To: Julia.Lawall
Cc: michal.lkml, linux-doc, Gilles.Muller, corbet, nicolas.palix,
linux-kernel, cocci
This patchset modifies coccicheck to use at most one thread per core by
default for optimal performance. Modify documentation in coccinelle.rst
to reflect the same.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
---
Documentation/dev-tools/coccinelle.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst
index 74c5e6aeeff5..a27a4867018c 100644
--- a/Documentation/dev-tools/coccinelle.rst
+++ b/Documentation/dev-tools/coccinelle.rst
@@ -130,8 +130,8 @@ To enable verbose messages set the V= variable, for example::
Coccinelle parallelization
--------------------------
-By default, coccicheck tries to run as parallel as possible. To change
-the parallelism, set the J= variable. For example, to run across 4 CPUs::
+By default, coccicheck uses at most only one thread per core of the system.
+To change the parallelism, set the J= variable. For example, to run across 4 CPUs::
make coccicheck MODE=report J=4
--
2.25.1
_______________________________________________
Cocci mailing list
Cocci@systeme.lip6.fr
https://systeme.lip6.fr/mailman/listinfo/cocci
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-10-06 19:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-06 19:04 [Cocci] [PATCH 0/2 v2] Improve Coccinelle Parallelisation Sumera Priyadarsini
2020-10-06 19:06 ` [Cocci] [PATCH 1/2 V2] scripts: coccicheck: Change default value for parallelism Sumera Priyadarsini
2020-10-06 19:06 ` [Cocci] [PATCH 2/2 V2] Documentation: Coccinelle: Modify parallelisation information in docs Sumera Priyadarsini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).