All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Sean Paul <seanpaul@chromium.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Cc: bbrezillon@kernel.org, dri-devel@lists.freedesktop.org,
	Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Jagan Teki <jagan@openedev.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/9] drm/sun4i: dsi: Add burst mode support
Date: Fri,  8 Feb 2019 10:53:13 +0100	[thread overview]
Message-ID: <cover.23dbbc9b943ff8f36253ac7c617e2eda142b1b69.1549619502.git-series.maxime.ripard@bootlin.com> (raw)

Hi,

Here is a series implementing the burst mode support for DSI.

It's been tested on an A33 board with the panel supported on the last
patch, which should remove all quirks due to a different SoC from the
equation.

Let me know what you think,
Maxime

Changes from v2:
  - Change the start delay calculation according to the legacy driver in
    Allwinner's BSP
  - Fixed the edge calculation to add the same parentheses around the
    factors
  - Added a bunch of fixes to timings
  - Added a patch to make hblk computation more accurate, and added a
    comment
  - Renamed the panel to Ronbo and fixed a bunch of things
  - Added the Reviewed-By

Konstantin Sudakov (2):
  drm/sun4i: dsi: Add burst support
  drm/panel: Add Ronbo RB070D30 panel

Maxime Ripard (7):
  fixup! ARM: dts: sun8i-a33: bridgemate: Enable display support
  drm/sun4i: dsi: Restrict DSI tcon clock divider
  drm/sun4i: dsi: Change the start delay calculation
  drm/sun4i: dsi: Enforce boundaries on the start delay
  drm/sun4i: dsi: Fix front vs back porch calculation
  drm/sun4i: dsi: Fix DRQ calculation
  drm/sun4i: dsi: Rework a bit the hblk calculation

 arch/arm/boot/dts/sun8i-a33-bridgemate-bm3.dts |   2 +-
 drivers/gpu/drm/panel/Kconfig                  |   9 +-
 drivers/gpu/drm/panel/Makefile                 |   1 +-
 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c   | 262 ++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun4i_tcon.c             |   4 +-
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c         | 183 ++++++++++---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h         |   2 +-
 7 files changed, 420 insertions(+), 43 deletions(-)
 create mode 100644 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c

base-commit: f6028e7e48b0f3865b0837d400ca783d3d200b62
-- 
git-series 0.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Sean Paul <seanpaul@chromium.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Cc: bbrezillon@kernel.org, dri-devel@lists.freedesktop.org,
	Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Jagan Teki <jagan@openedev.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/9] drm/sun4i: dsi: Add burst mode support
Date: Fri,  8 Feb 2019 10:53:13 +0100	[thread overview]
Message-ID: <cover.23dbbc9b943ff8f36253ac7c617e2eda142b1b69.1549619502.git-series.maxime.ripard@bootlin.com> (raw)

Hi,

Here is a series implementing the burst mode support for DSI.

It's been tested on an A33 board with the panel supported on the last
patch, which should remove all quirks due to a different SoC from the
equation.

Let me know what you think,
Maxime

Changes from v2:
  - Change the start delay calculation according to the legacy driver in
    Allwinner's BSP
  - Fixed the edge calculation to add the same parentheses around the
    factors
  - Added a bunch of fixes to timings
  - Added a patch to make hblk computation more accurate, and added a
    comment
  - Renamed the panel to Ronbo and fixed a bunch of things
  - Added the Reviewed-By

Konstantin Sudakov (2):
  drm/sun4i: dsi: Add burst support
  drm/panel: Add Ronbo RB070D30 panel

Maxime Ripard (7):
  fixup! ARM: dts: sun8i-a33: bridgemate: Enable display support
  drm/sun4i: dsi: Restrict DSI tcon clock divider
  drm/sun4i: dsi: Change the start delay calculation
  drm/sun4i: dsi: Enforce boundaries on the start delay
  drm/sun4i: dsi: Fix front vs back porch calculation
  drm/sun4i: dsi: Fix DRQ calculation
  drm/sun4i: dsi: Rework a bit the hblk calculation

 arch/arm/boot/dts/sun8i-a33-bridgemate-bm3.dts |   2 +-
 drivers/gpu/drm/panel/Kconfig                  |   9 +-
 drivers/gpu/drm/panel/Makefile                 |   1 +-
 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c   | 262 ++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun4i_tcon.c             |   4 +-
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c         | 183 ++++++++++---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h         |   2 +-
 7 files changed, 420 insertions(+), 43 deletions(-)
 create mode 100644 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c

base-commit: f6028e7e48b0f3865b0837d400ca783d3d200b62
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2019-02-08  9:54 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-08  9:53 Maxime Ripard [this message]
2019-02-08  9:53 ` [PATCH v2 0/9] drm/sun4i: dsi: Add burst mode support Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 1/9] fixup! ARM: dts: sun8i-a33: bridgemate: Enable display support Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-02-08  9:57   ` Maxime Ripard
2019-02-08  9:57     ` Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 2/9] drm/sun4i: dsi: Restrict DSI tcon clock divider Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 3/9] drm/sun4i: dsi: Change the start delay calculation Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-03-07 17:54   ` Jagan Teki
2019-03-07 17:54     ` Jagan Teki
2019-03-11 14:12     ` Maxime Ripard
2019-03-11 14:12       ` Maxime Ripard
2019-03-11 14:37       ` Jagan Teki
2019-03-11 14:37         ` Jagan Teki
2019-03-19 10:18         ` Maxime Ripard
2019-03-19 10:18           ` Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 4/9] drm/sun4i: dsi: Enforce boundaries on the start delay Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 5/9] drm/sun4i: dsi: Fix front vs back porch calculation Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 6/9] drm/sun4i: dsi: Fix DRQ calculation Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 7/9] drm/sun4i: dsi: Rework a bit the hblk calculation Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 8/9] drm/sun4i: dsi: Add burst support Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-02-08  9:53 ` [PATCH v2 9/9] drm/panel: Add Ronbo RB070D30 panel Maxime Ripard
2019-02-08  9:53   ` Maxime Ripard
2019-02-08 12:24   ` Konstantin Sudakov
2019-02-08 12:24     ` Konstantin Sudakov
2019-02-11 14:40     ` Maxime Ripard
2019-02-11 14:40       ` Maxime Ripard
2019-02-08 18:21   ` Sam Ravnborg
2019-02-08 18:21     ` Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.23dbbc9b943ff8f36253ac7c617e2eda142b1b69.1549619502.git-series.maxime.ripard@bootlin.com \
    --to=maxime.ripard@bootlin.com \
    --cc=bbrezillon@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jagan@openedev.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=paul.kocialkowski@bootlin.com \
    --cc=seanpaul@chromium.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.