Re: [PATCH v3 1/4] spi: bcm63xx-spi: add reset support

From: Florian Fainelli <f.fainelli@gmail.com>
To: "Álvaro Fernández Rojas" <noltari@gmail.com>,
	broonie@kernel.org, f.fainelli@gmail.com,
	bcm-kernel-feedback-list@broadcom.com, p.zabel@pengutronix.de,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 1/4] spi: bcm63xx-spi: add reset support
Date: Tue, 16 Jun 2020 10:05:06 -0700	[thread overview]
Message-ID: <d79c9e3d-fcf3-84ab-4a13-8ff00b4b2605@gmail.com> (raw)
In-Reply-To: <20200616070223.3401282-2-noltari@gmail.com>

On 6/16/2020 12:02 AM, Álvaro Fernández Rojas wrote:
> bcm63xx arch resets the SPI controller at early boot. However, bmips arch
> needs to perform a reset when probing the driver.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
>  v3: use devm_reset_control_get_optional_exclusive
>  v2: use devm_reset_control_get_exclusive
> 
>  drivers/spi/spi-bcm63xx.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
> index 0f1b10a4ef0c..92e88901189c 100644
> --- a/drivers/spi/spi-bcm63xx.c
> +++ b/drivers/spi/spi-bcm63xx.c
> @@ -18,6 +18,7 @@
>  #include <linux/err.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/of.h>
> +#include <linux/reset.h>
>  
>  /* BCM 6338/6348 SPI core */
>  #define SPI_6348_RSET_SIZE		64
> @@ -493,6 +494,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
>  	struct bcm63xx_spi *bs;
>  	int ret;
>  	u32 num_cs = BCM63XX_SPI_MAX_CS;
> +	struct reset_control *reset;
>  
>  	if (dev->of_node) {
>  		const struct of_device_id *match;
> @@ -529,6 +531,15 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
>  		return PTR_ERR(clk);
>  	}
>  
> +	reset = devm_reset_control_get_optional_exclusive(dev, NULL);
> +	if (IS_ERR(reset)) {
> +		ret = PTR_ERR(reset);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev,
> +				"failed to get reset controller: %d\n", ret);
> +		return ret;
> +	}

When the controller is optional, you don't need to do that manual error
checking, as it does that for you already. You can only do:

if (IS_ERR(reset))
	return PTR_ERR(reset);

and that's it. With that fixed in v4, you can add:

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian