From: Len Brown <lenb@kernel.org>
To: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Len Brown <len.brown@intel.com>
Subject: [PATCH 37/44] tools/power turbostat: turbostat.8 update
Date: Wed, 1 Mar 2017 00:27:41 -0500 [thread overview]
Message-ID: <da67e2b9fd1d846a41978690da0a899d8e4378ec.1488345270.git.len.brown@intel.com> (raw)
In-Reply-To: <20170301052748.27810-1-lenb@kernel.org>
In-Reply-To: <678a3bd1b3de6d2ebf604e7d708bc8150bb667e9.1488345270.git.len.brown@intel.com>
From: Len Brown <len.brown@intel.com>
update examples to show recently updated features.
In particular
--add
--show
--hide
--cpu
--list
Signed-off-by: Len Brown <len.brown@intel.com>
---
tools/power/x86/turbostat/turbostat.8 | 238 ++++++++++++++++++++--------------
1 file changed, 140 insertions(+), 98 deletions(-)
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index efe6a7147ff2..b1b1ab80102c 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -16,9 +16,9 @@ idle power-state statistics, temperature and power on X86 processors.
There are two ways to invoke turbostat.
The first method is to supply a
\fBcommand\fP, which is forked and statistics are printed
-upon its completion.
+in one-shot upon its completion.
The second method is to omit the command,
-and turbostat displays statistics every 5 seconds.
+and turbostat displays statistics every 5 seconds interval.
The 5-second interval can be changed using the --interval option.
.PP
Some information is not available on older processors.
@@ -28,9 +28,10 @@ name as necessary to disambiguate it from others is necessary. Note that option
.PP
\fB--add attributes\fP add column with counter having specified 'attributes'. The 'location' attribute is required, all others are optional.
.nf
- location: {\fBmsrDDD\fP | \fBmsr0xXXX\fP}
+ location: {\fBmsrDDD\fP | \fBmsr0xXXX\fP | \fB/sys/path...\fP}
msrDDD is a decimal offset, eg. msr16
msr0xXXX is a hex offset, eg. msr0x10
+ /sys/path... is an absolute path to a sysfs attribute
scope: {\fBcpu\fP | \fBcore\fP | \fBpackage\fP}
sample and print the counter for every cpu, core, or package.
@@ -45,6 +46,10 @@ name as necessary to disambiguate it from others is necessary. Note that option
'delta' shows the difference in values during the measurement interval.
'percent' shows the delta as a percentage of the cycles elapsed.
default: delta
+
+ name: "name_string"
+ Any string that does not match a key-word above is used
+ as the column header.
.fi
.PP
\fB--cpu cpu-set\fP limit output to system summary plus the specified cpu-set. cpu-set is a comma delimited list of cpu ranges. cpu ranges can be individual cpu numbers or start and end numbers, separated by ".." or '-'. eg. 1,2,8,14..17,21-44
@@ -68,6 +73,8 @@ The file is truncated if it already exists, and it is created if it does not exi
.PP
\fB--Package\fP limits output to the system summary plus the 1st thread in each Package.
.PP
+\fB--list\fP display column header names available for use by --show and --hide, then exit.
+.PP
\fB--processor\fP limits output to the system summary plus the 1st thread in each processor of each package. Ie. it skips hyper-threaded siblings.
.PP
\fB--Summary\fP limits output to a 1-line System Summary for each interval.
@@ -79,24 +86,25 @@ The file is truncated if it already exists, and it is created if it does not exi
The \fBcommand\fP parameter forks \fBcommand\fP, and upon its exit,
displays the statistics gathered since it was forked.
.PP
-.SH DEFAULT FIELD DESCRIPTIONS
+.SH ROW DESCRIPTIONS
+The system configuration dump (if --quiet is not used) is followed by statistics. The first row of the statistics labels the content of each column (below). The second row of statistics is the system summary line. The system summary line has a '-' in the columns for the Package, Core, and CPU. The contents of the system summary line depends on the type of column. Columns that count items (eg. IRQ) show the sum across all CPUs in the system. Columns that show a percentage show the average across all CPUs in the system. Columns that dump raw MSR values simply show 0 in the summary. After the system summary row, each row describes a specific Package/Core/CPU. Note that if the --cpu parameter is used to limit which specific CPUs are displayed, turbostat will still collect statistics for all CPUs in the system and will still show the system summary for all CPUs in the system.
+.SH COLUMN DESCRIPTIONS
.nf
+\fBCore\fP processor core number. Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT).
\fBCPU\fP Linux CPU (logical processor) number. Yes, it is okay that on many systems the CPUs are not listed in numerical order -- for efficiency reasons, turbostat runs in topology order, so HT siblings appear together.
-\fBAVG_MHz\fP number of cycles executed divided by time elapsed.
-\fBBusy%\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
-\fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
+\fBPackage\fP processor package number -- not present on systems with a single processor package.
+\fBAvg_MHz\fP number of cycles executed divided by time elapsed. Note that this includes idle-time when 0 instructions are executed.
+\fBBusy%\fP percent of the measurement interval that the CPU executes instructions, aka. % of time in "C0" state.
+\fBBzy_MHz\fP average clock rate while the CPU was not idle (ie. in "c0" state).
\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
-.fi
-.PP
-.SH DEBUG FIELD DESCRIPTIONS
-.nf
-\fBPackage\fP processor package number.
-\fBCore\fP processor core number.
-Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT).
-\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
+\fBIRQ\fP The number of interrupts serviced by that CPU during the measurement interval. The system total line is the sum of interrupts serviced across all CPUs. turbostat parses /proc/interrupts to generate this summary.
+\fBSMI\fP The number of System Management Interrupts serviced CPU during the measurement interval. While this counter is actually per-CPU, SMI are triggered on all processors, so the number should be the same for all CPUs.
+\fBC1, C2, C3...\fP The number times Linux requested the C1, C2, C3 idle state during the measurement interval. The system summary line shows the sum for all CPUs. These are C-state names as exported in /sys/devices/system/cpu/cpu*/cpuidle/state*/name. While their names are generic, their attributes are processor specific. They the system description section of output shows what MWAIT sub-states they are mapped to on each system.
+\fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved.
+\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters.
\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
-\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
+\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states. These numbers are from hardware residency counters.
\fBPkgWatt\fP Watts consumed by the whole package.
\fBCorWatt\fP Watts consumed by the core part of the package.
\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
@@ -104,50 +112,110 @@ Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading T
\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
.fi
+.SH TOO MUCH INFORMATION EXAMPLE
+By default, turbostat dumps all possible information -- a system configuration header, followed by columns for all counters.
+This is ideal for remote debugging, use the "--out" option to save everything to a text file, and get that file to the expert helping you debug.
.PP
-.SH PERIODIC EXAMPLE
-Without any parameters, turbostat displays statistics ever 5 seconds.
-Periodic output goes to stdout, by default, unless --out is used to specify an output file.
-The 5-second interval can be changed with th "-i sec" option.
-Or a command may be specified as in "FORK EXAMPLE" below.
+When you are not interested in all that information, and there are several ways to see only what you want. First the "--quiet" option will skip the configuration information, and turbostat will show only the counter columns. Second, you can reduce the columns with the "--hide" and "--show" options. If you use the "--show" option, then turbostat will show only the columns you list. If you use the "--hide" option, turbostat will show all columns, except the ones you list.
+.PP
+To find out what columns are available for --show and --hide, the "--list" option is available. Note, however, there is an exception. The C-state columns collected from sysfs "C1,C2,C3,C1%,C2%,C3%" are not built-in counters, but are discovered after --show and --hide are processed. You can use the special counter name "sysfs" to refer to all of them at the same time.
+.nf
+sudo ./turbostat --show sysfs --quiet sleep 10
+10.003837 sec
+ C1 C1E C3 C6 C7s C1% C1E% C3% C6% C7s%
+ 4 21 2 2 459 0.14 0.82 0.00 0.00 98.93
+ 1 17 2 2 130 0.00 0.02 0.00 0.00 99.80
+ 0 0 0 0 31 0.00 0.00 0.00 0.00 99.95
+ 2 1 0 0 52 1.14 6.49 0.00 0.00 92.21
+ 1 2 0 0 52 0.00 0.08 0.00 0.00 99.86
+ 0 0 0 0 71 0.00 0.00 0.00 0.00 99.89
+ 0 0 0 0 25 0.00 0.00 0.00 0.00 99.96
+ 0 0 0 0 74 0.00 0.00 0.00 0.00 99.94
+ 0 1 0 0 24 0.00 0.00 0.00 0.00 99.84
+.fi
+.PP
+.SH ONE SHOT COMMAND EXAMPLE
+If turbostat is invoked with a command, it will fork that command
+and output the statistics gathered after the command exits.
+In this case, turbostat output goes to stderr, by default.
+Output can instead be saved to a file using the --out option.
+In this example, the "sleep 10" command is forked, and turbostat waits for it to complete before saving all statistics into "ts.out". Note that "sleep 10" is not part of turbostat, but is simply an example of a command that turbostat can fork. The "ts.out" file is what you want to edit in a very wide window, paste into a spreadsheet, or attach to a bugzilla entry.
+
.nf
-[root@hsw]# ./turbostat
- CPU Avg_MHz Busy% Bzy_MHz TSC_MHz
- - 488 12.51 3898 3498
- 0 0 0.01 3885 3498
- 4 3897 99.99 3898 3498
- 1 0 0.00 3861 3498
- 5 0 0.00 3882 3498
- 2 1 0.02 3894 3498
- 6 2 0.06 3898 3498
- 3 0 0.00 3849 3498
- 7 0 0.00 3877 3498
+[root@hsw]# ./turbostat -o ts.out sleep 10
+[root@hsw]#
+.fi
+.SH PERIODIC INTERVAL EXAMPLE
+Without a command to fork, turbostat displays statistics ever 5 seconds.
+Periodic output goes to stdout, by default, unless --out is used to specify an output file.
+The 5-second interval can be changed with the "-i sec" option.
+.nf
+sudo ./turbostat --quiet --hide sysfs,IRQ,SMI,CoreTmp,PkgTmp,GFX%rc6,GFXMHz,PkgWatt,CorWatt,GFXWatt
+ Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c1 CPU%c3 CPU%c6 CPU%c7
+ - - 488 12.52 3900 3498 12.50 0.00 0.00 74.98
+ 0 0 5 0.13 3900 3498 99.87 0.00 0.00 0.00
+ 0 4 3897 99.99 3900 3498 0.01
+ 1 1 0 0.00 3856 3498 0.01 0.00 0.00 99.98
+ 1 5 0 0.00 3861 3498 0.01
+ 2 2 1 0.02 3889 3498 0.03 0.00 0.00 99.95
+ 2 6 0 0.00 3863 3498 0.05
+ 3 3 0 0.01 3869 3498 0.02 0.00 0.00 99.97
+ 3 7 0 0.00 3878 3498 0.03
+ Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c1 CPU%c3 CPU%c6 CPU%c7
+ - - 491 12.59 3900 3498 12.42 0.00 0.00 74.99
+ 0 0 27 0.69 3900 3498 99.31 0.00 0.00 0.00
+ 0 4 3898 99.99 3900 3498 0.01
+ 1 1 0 0.00 3883 3498 0.01 0.00 0.00 99.99
+ 1 5 0 0.00 3898 3498 0.01
+ 2 2 0 0.01 3889 3498 0.02 0.00 0.00 99.98
+ 2 6 0 0.00 3889 3498 0.02
+ 3 3 0 0.00 3856 3498 0.01 0.00 0.00 99.99
+ 3 7 0 0.00 3897 3498 0.01
.fi
-.SH DEBUG EXAMPLE
+This example also shows the use of the --hide option to skip columns that are not wanted.
+Note that cpu4 in this example is 99.99% busy, while the other CPUs are all under 1% busy.
+Notice that cpu4's HT sibling is cpu0, which is under 1% busy, but can get into CPU%c1 only,
+because its cpu4's activity on shared hardware keeps it from entering a deeper C-state.
+
+.SH SYSTEM CONFIGURATION INFORMATION EXAMPLE
-The first row of statistics is a summary for the entire system.
-For residency % columns, the summary is a weighted average.
-For Temperature columns, the summary is the column maximum.
-For Watts columns, the summary is a system total.
-Subsequent rows show per-CPU statistics.
+By default, turbostat always dumps system configuration information
+before taking measurements. In the example above, "--quiet" is used
+to suppress that output. Here is an example of the configuration information:
.nf
-turbostat version 4.1 10-Feb, 2015 - Len Brown <lenb@kernel.org>
+turbostat version 2017.02.15 - Len Brown <lenb@kernel.org>
CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:3c:3 (6:60:3)
-CPUID(6): APERF, DTS, PTM, EPB
+CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM TM
+CPUID(6): APERF, TURBO, DTS, PTM, No-HWP, No-HWPnotify, No-HWPwindow, No-HWPepp, No-HWPpkg, EPB
+cpu4: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO)
+CPUID(7): No-SGX
+cpu4: MSR_MISC_PWR_MGMT: 0x00400000 (ENable-EIST_Coordination DISable-EPB DISable-OOB)
RAPL: 3121 sec. Joule Counter Range, at 84 Watts
-cpu0: MSR_NHM_PLATFORM_INFO: 0x80838f3012300
-8 * 100 = 800 MHz max efficiency
-35 * 100 = 3500 MHz TSC frequency
-cpu0: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
-cpu0: MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0)
-cpu0: MSR_TURBO_RATIO_LIMIT: 0x25262727
-37 * 100 = 3700 MHz max turbo 4 active cores
-38 * 100 = 3800 MHz max turbo 3 active cores
-39 * 100 = 3900 MHz max turbo 2 active cores
-39 * 100 = 3900 MHz max turbo 1 active cores
+cpu4: MSR_PLATFORM_INFO: 0x80838f3012300
+8 * 100.0 = 800.0 MHz max efficiency frequency
+35 * 100.0 = 3500.0 MHz base frequency
+cpu4: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
+cpu4: MSR_TURBO_RATIO_LIMIT: 0x25262727
+37 * 100.0 = 3700.0 MHz max turbo 4 active cores
+38 * 100.0 = 3800.0 MHz max turbo 3 active cores
+39 * 100.0 = 3900.0 MHz max turbo 2 active cores
+39 * 100.0 = 3900.0 MHz max turbo 1 active cores
+cpu4: MSR_CONFIG_TDP_NOMINAL: 0x00000023 (base_ratio=35)
+cpu4: MSR_CONFIG_TDP_LEVEL_1: 0x00000000 ()
+cpu4: MSR_CONFIG_TDP_LEVEL_2: 0x00000000 ()
+cpu4: MSR_CONFIG_TDP_CONTROL: 0x80000000 ( lock=1)
+cpu4: MSR_TURBO_ACTIVATION_RATIO: 0x00000000 (MAX_NON_TURBO_RATIO=0 lock=0)
+cpu4: MSR_PKG_CST_CONFIG_CONTROL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0)
+cpu4: POLL: CPUIDLE CORE POLL IDLE
+cpu4: C1: MWAIT 0x00
+cpu4: C1E: MWAIT 0x01
+cpu4: C3: MWAIT 0x10
+cpu4: C6: MWAIT 0x20
+cpu4: C7s: MWAIT 0x32
+cpu4: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch)
cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced)
-cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Auto-HWP, Amps, MultiCoreTurbo, Transitions, )
+cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Transitions, MultiCoreTurbo, Amps, Auto-HWP, )
cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x00000000 (Active: ) (Logged: )
cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d000000 (Active: ) (Logged: Amps, PkgPwrL1, PkgPwrL2, )
cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
@@ -162,23 +230,14 @@ cpu0: MSR_PP1_POLICY: 0
cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C)
-cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x88340800 (48 C)
-cpu0: MSR_IA32_THERM_STATUS: 0x88340000 (48 C +/- 1)
-cpu1: MSR_IA32_THERM_STATUS: 0x88440000 (32 C +/- 1)
-cpu2: MSR_IA32_THERM_STATUS: 0x88450000 (31 C +/- 1)
-cpu3: MSR_IA32_THERM_STATUS: 0x88490000 (27 C +/- 1)
- Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp PkgWatt CorWatt GFXWatt
- - - 493 12.64 3898 3498 0 12.64 0.00 0.00 74.72 47 47 21.62 13.74 0.00
- 0 0 4 0.11 3894 3498 0 99.89 0.00 0.00 0.00 47 47 21.62 13.74 0.00
- 0 4 3897 99.98 3898 3498 0 0.02
- 1 1 7 0.17 3887 3498 0 0.04 0.00 0.00 99.79 32
- 1 5 0 0.00 3885 3498 0 0.21
- 2 2 29 0.76 3895 3498 0 0.10 0.01 0.01 99.13 32
- 2 6 2 0.06 3896 3498 0 0.80
- 3 3 1 0.02 3832 3498 0 0.03 0.00 0.00 99.95 28
- 3 7 0 0.00 3879 3498 0 0.04
-^C
-
+cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884c0800 (24 C)
+cpu0: MSR_IA32_THERM_STATUS: 0x884c0000 (24 C +/- 1)
+cpu1: MSR_IA32_THERM_STATUS: 0x88510000 (19 C +/- 1)
+cpu2: MSR_IA32_THERM_STATUS: 0x884e0000 (22 C +/- 1)
+cpu3: MSR_IA32_THERM_STATUS: 0x88510000 (19 C +/- 1)
+cpu4: MSR_PKGC3_IRTL: 0x00008842 (valid, 67584 ns)
+cpu4: MSR_PKGC6_IRTL: 0x00008873 (valid, 117760 ns)
+cpu4: MSR_PKGC7_IRTL: 0x00008891 (valid, 148480 ns)
.fi
The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
available at the minimum package voltage. The \fBTSC frequency\fP is the base
@@ -188,39 +247,22 @@ should be sustainable on all CPUs indefinitely, given nominal power and cooling.
The remaining rows show what maximum turbo frequency is possible
depending on the number of idle cores. Note that not all information is
available on all processors.
-.SH FORK EXAMPLE
-If turbostat is invoked with a command, it will fork that command
-and output the statistics gathered after the command exits.
-In this case, turbostat output goes to stderr, by default.
-Output can instead be saved to a file using the --out option.
-eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
-until ^C while the other CPUs are mostly idle:
-
+.SH ADD COUNTER EXAMPLE
+Here we limit turbostat to showing just the CPU number for cpu0 - cpu3.
+We add a counter showing the 32-bit raw value of MSR 0x199 (MSR_IA32_PERF_CTL),
+labeling it with the column header, "PRF_CTRL", and display it only once,
+afte the conclusion of a 0.1 second sleep.
.nf
-root@hsw: turbostat cat /dev/zero > /dev/null
-^C
- CPU Avg_MHz Busy% Bzy_MHz TSC_MHz
- - 482 12.51 3854 3498
- 0 0 0.01 1960 3498
- 4 0 0.00 2128 3498
- 1 0 0.00 3003 3498
- 5 3854 99.98 3855 3498
- 2 0 0.01 3504 3498
- 6 3 0.08 3884 3498
- 3 0 0.00 2553 3498
- 7 0 0.00 2126 3498
-10.783983 sec
+sudo ./turbostat --quiet --cpu 0-3 --show CPU --add msr0x199,u32,raw,PRF_CTRL sleep .1
+0.101604 sec
+CPU PRF_CTRL
+- 0x00000000
+0 0x00000c00
+1 0x00000800
+2 0x00000a00
+3 0x00000800
.fi
-Above the cycle soaker drives cpu5 up its 3.9 GHz turbo limit.
-The first row shows the average MHz and Busy% across all the processors in the system.
-
-Note that the Avg_MHz column reflects the total number of cycles executed
-divided by the measurement interval. If the Busy% column is 100%,
-then the processor was running at that speed the entire interval.
-The Avg_MHz multiplied by the Busy% results in the Bzy_MHz --
-which is the average frequency while the processor was executing --
-not including any non-busy idle time.
.SH NOTES
--
2.11.0.161.g6610af872
WARNING: multiple messages have this Message-ID (diff)
From: Len Brown <lenb@kernel.org>
To: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Len Brown <len.brown@intel.com>
Subject: [PATCH 37/44] tools/power turbostat: turbostat.8 update
Date: Wed, 1 Mar 2017 00:27:41 -0500 [thread overview]
Message-ID: <da67e2b9fd1d846a41978690da0a899d8e4378ec.1488345270.git.len.brown@intel.com> (raw)
In-Reply-To: <20170301052748.27810-1-lenb@kernel.org>
In-Reply-To: <678a3bd1b3de6d2ebf604e7d708bc8150bb667e9.1488345270.git.len.brown@intel.com>
From: Len Brown <len.brown@intel.com>
update examples to show recently updated features.
In particular
--add
--show
--hide
--cpu
--list
Signed-off-by: Len Brown <len.brown@intel.com>
---
tools/power/x86/turbostat/turbostat.8 | 238 ++++++++++++++++++++--------------
1 file changed, 140 insertions(+), 98 deletions(-)
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index efe6a7147ff2..b1b1ab80102c 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -16,9 +16,9 @@ idle power-state statistics, temperature and power on X86 processors.
There are two ways to invoke turbostat.
The first method is to supply a
\fBcommand\fP, which is forked and statistics are printed
-upon its completion.
+in one-shot upon its completion.
The second method is to omit the command,
-and turbostat displays statistics every 5 seconds.
+and turbostat displays statistics every 5 seconds interval.
The 5-second interval can be changed using the --interval option.
.PP
Some information is not available on older processors.
@@ -28,9 +28,10 @@ name as necessary to disambiguate it from others is necessary. Note that option
.PP
\fB--add attributes\fP add column with counter having specified 'attributes'. The 'location' attribute is required, all others are optional.
.nf
- location: {\fBmsrDDD\fP | \fBmsr0xXXX\fP}
+ location: {\fBmsrDDD\fP | \fBmsr0xXXX\fP | \fB/sys/path...\fP}
msrDDD is a decimal offset, eg. msr16
msr0xXXX is a hex offset, eg. msr0x10
+ /sys/path... is an absolute path to a sysfs attribute
scope: {\fBcpu\fP | \fBcore\fP | \fBpackage\fP}
sample and print the counter for every cpu, core, or package.
@@ -45,6 +46,10 @@ name as necessary to disambiguate it from others is necessary. Note that option
'delta' shows the difference in values during the measurement interval.
'percent' shows the delta as a percentage of the cycles elapsed.
default: delta
+
+ name: "name_string"
+ Any string that does not match a key-word above is used
+ as the column header.
.fi
.PP
\fB--cpu cpu-set\fP limit output to system summary plus the specified cpu-set. cpu-set is a comma delimited list of cpu ranges. cpu ranges can be individual cpu numbers or start and end numbers, separated by ".." or '-'. eg. 1,2,8,14..17,21-44
@@ -68,6 +73,8 @@ The file is truncated if it already exists, and it is created if it does not exi
.PP
\fB--Package\fP limits output to the system summary plus the 1st thread in each Package.
.PP
+\fB--list\fP display column header names available for use by --show and --hide, then exit.
+.PP
\fB--processor\fP limits output to the system summary plus the 1st thread in each processor of each package. Ie. it skips hyper-threaded siblings.
.PP
\fB--Summary\fP limits output to a 1-line System Summary for each interval.
@@ -79,24 +86,25 @@ The file is truncated if it already exists, and it is created if it does not exi
The \fBcommand\fP parameter forks \fBcommand\fP, and upon its exit,
displays the statistics gathered since it was forked.
.PP
-.SH DEFAULT FIELD DESCRIPTIONS
+.SH ROW DESCRIPTIONS
+The system configuration dump (if --quiet is not used) is followed by statistics. The first row of the statistics labels the content of each column (below). The second row of statistics is the system summary line. The system summary line has a '-' in the columns for the Package, Core, and CPU. The contents of the system summary line depends on the type of column. Columns that count items (eg. IRQ) show the sum across all CPUs in the system. Columns that show a percentage show the average across all CPUs in the system. Columns that dump raw MSR values simply show 0 in the summary. After the system summary row, each row describes a specific Package/Core/CPU. Note that if the --cpu parameter is used to limit which specific CPUs are displayed, turbostat will still collect statistics
for all CPUs in the system and will still show the system summary for all CPUs in the system.
+.SH COLUMN DESCRIPTIONS
.nf
+\fBCore\fP processor core number. Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT).
\fBCPU\fP Linux CPU (logical processor) number. Yes, it is okay that on many systems the CPUs are not listed in numerical order -- for efficiency reasons, turbostat runs in topology order, so HT siblings appear together.
-\fBAVG_MHz\fP number of cycles executed divided by time elapsed.
-\fBBusy%\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
-\fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
+\fBPackage\fP processor package number -- not present on systems with a single processor package.
+\fBAvg_MHz\fP number of cycles executed divided by time elapsed. Note that this includes idle-time when 0 instructions are executed.
+\fBBusy%\fP percent of the measurement interval that the CPU executes instructions, aka. % of time in "C0" state.
+\fBBzy_MHz\fP average clock rate while the CPU was not idle (ie. in "c0" state).
\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
-.fi
-.PP
-.SH DEBUG FIELD DESCRIPTIONS
-.nf
-\fBPackage\fP processor package number.
-\fBCore\fP processor core number.
-Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT).
-\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
+\fBIRQ\fP The number of interrupts serviced by that CPU during the measurement interval. The system total line is the sum of interrupts serviced across all CPUs. turbostat parses /proc/interrupts to generate this summary.
+\fBSMI\fP The number of System Management Interrupts serviced CPU during the measurement interval. While this counter is actually per-CPU, SMI are triggered on all processors, so the number should be the same for all CPUs.
+\fBC1, C2, C3...\fP The number times Linux requested the C1, C2, C3 idle state during the measurement interval. The system summary line shows the sum for all CPUs. These are C-state names as exported in /sys/devices/system/cpu/cpu*/cpuidle/state*/name. While their names are generic, their attributes are processor specific. They the system description section of output shows what MWAIT sub-states they are mapped to on each system.
+\fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved.
+\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters.
\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
-\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
+\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states. These numbers are from hardware residency counters.
\fBPkgWatt\fP Watts consumed by the whole package.
\fBCorWatt\fP Watts consumed by the core part of the package.
\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
@@ -104,50 +112,110 @@ Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading T
\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
.fi
+.SH TOO MUCH INFORMATION EXAMPLE
+By default, turbostat dumps all possible information -- a system configuration header, followed by columns for all counters.
+This is ideal for remote debugging, use the "--out" option to save everything to a text file, and get that file to the expert helping you debug.
.PP
-.SH PERIODIC EXAMPLE
-Without any parameters, turbostat displays statistics ever 5 seconds.
-Periodic output goes to stdout, by default, unless --out is used to specify an output file.
-The 5-second interval can be changed with th "-i sec" option.
-Or a command may be specified as in "FORK EXAMPLE" below.
+When you are not interested in all that information, and there are several ways to see only what you want. First the "--quiet" option will skip the configuration information, and turbostat will show only the counter columns. Second, you can reduce the columns with the "--hide" and "--show" options. If you use the "--show" option, then turbostat will show only the columns you list. If you use the "--hide" option, turbostat will show all columns, except the ones you list.
+.PP
+To find out what columns are available for --show and --hide, the "--list" option is available. Note, however, there is an exception. The C-state columns collected from sysfs "C1,C2,C3,C1%,C2%,C3%" are not built-in counters, but are discovered after --show and --hide are processed. You can use the special counter name "sysfs" to refer to all of them at the same time.
+.nf
+sudo ./turbostat --show sysfs --quiet sleep 10
+10.003837 sec
+ C1 C1E C3 C6 C7s C1% C1E% C3% C6% C7s%
+ 4 21 2 2 459 0.14 0.82 0.00 0.00 98.93
+ 1 17 2 2 130 0.00 0.02 0.00 0.00 99.80
+ 0 0 0 0 31 0.00 0.00 0.00 0.00 99.95
+ 2 1 0 0 52 1.14 6.49 0.00 0.00 92.21
+ 1 2 0 0 52 0.00 0.08 0.00 0.00 99.86
+ 0 0 0 0 71 0.00 0.00 0.00 0.00 99.89
+ 0 0 0 0 25 0.00 0.00 0.00 0.00 99.96
+ 0 0 0 0 74 0.00 0.00 0.00 0.00 99.94
+ 0 1 0 0 24 0.00 0.00 0.00 0.00 99.84
+.fi
+.PP
+.SH ONE SHOT COMMAND EXAMPLE
+If turbostat is invoked with a command, it will fork that command
+and output the statistics gathered after the command exits.
+In this case, turbostat output goes to stderr, by default.
+Output can instead be saved to a file using the --out option.
+In this example, the "sleep 10" command is forked, and turbostat waits for it to complete before saving all statistics into "ts.out". Note that "sleep 10" is not part of turbostat, but is simply an example of a command that turbostat can fork. The "ts.out" file is what you want to edit in a very wide window, paste into a spreadsheet, or attach to a bugzilla entry.
+
.nf
-[root@hsw]# ./turbostat
- CPU Avg_MHz Busy% Bzy_MHz TSC_MHz
- - 488 12.51 3898 3498
- 0 0 0.01 3885 3498
- 4 3897 99.99 3898 3498
- 1 0 0.00 3861 3498
- 5 0 0.00 3882 3498
- 2 1 0.02 3894 3498
- 6 2 0.06 3898 3498
- 3 0 0.00 3849 3498
- 7 0 0.00 3877 3498
+[root@hsw]# ./turbostat -o ts.out sleep 10
+[root@hsw]#
+.fi
+.SH PERIODIC INTERVAL EXAMPLE
+Without a command to fork, turbostat displays statistics ever 5 seconds.
+Periodic output goes to stdout, by default, unless --out is used to specify an output file.
+The 5-second interval can be changed with the "-i sec" option.
+.nf
+sudo ./turbostat --quiet --hide sysfs,IRQ,SMI,CoreTmp,PkgTmp,GFX%rc6,GFXMHz,PkgWatt,CorWatt,GFXWatt
+ Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c1 CPU%c3 CPU%c6 CPU%c7
+ - - 488 12.52 3900 3498 12.50 0.00 0.00 74.98
+ 0 0 5 0.13 3900 3498 99.87 0.00 0.00 0.00
+ 0 4 3897 99.99 3900 3498 0.01
+ 1 1 0 0.00 3856 3498 0.01 0.00 0.00 99.98
+ 1 5 0 0.00 3861 3498 0.01
+ 2 2 1 0.02 3889 3498 0.03 0.00 0.00 99.95
+ 2 6 0 0.00 3863 3498 0.05
+ 3 3 0 0.01 3869 3498 0.02 0.00 0.00 99.97
+ 3 7 0 0.00 3878 3498 0.03
+ Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c1 CPU%c3 CPU%c6 CPU%c7
+ - - 491 12.59 3900 3498 12.42 0.00 0.00 74.99
+ 0 0 27 0.69 3900 3498 99.31 0.00 0.00 0.00
+ 0 4 3898 99.99 3900 3498 0.01
+ 1 1 0 0.00 3883 3498 0.01 0.00 0.00 99.99
+ 1 5 0 0.00 3898 3498 0.01
+ 2 2 0 0.01 3889 3498 0.02 0.00 0.00 99.98
+ 2 6 0 0.00 3889 3498 0.02
+ 3 3 0 0.00 3856 3498 0.01 0.00 0.00 99.99
+ 3 7 0 0.00 3897 3498 0.01
.fi
-.SH DEBUG EXAMPLE
+This example also shows the use of the --hide option to skip columns that are not wanted.
+Note that cpu4 in this example is 99.99% busy, while the other CPUs are all under 1% busy.
+Notice that cpu4's HT sibling is cpu0, which is under 1% busy, but can get into CPU%c1 only,
+because its cpu4's activity on shared hardware keeps it from entering a deeper C-state.
+
+.SH SYSTEM CONFIGURATION INFORMATION EXAMPLE
-The first row of statistics is a summary for the entire system.
-For residency % columns, the summary is a weighted average.
-For Temperature columns, the summary is the column maximum.
-For Watts columns, the summary is a system total.
-Subsequent rows show per-CPU statistics.
+By default, turbostat always dumps system configuration information
+before taking measurements. In the example above, "--quiet" is used
+to suppress that output. Here is an example of the configuration information:
.nf
-turbostat version 4.1 10-Feb, 2015 - Len Brown <lenb@kernel.org>
+turbostat version 2017.02.15 - Len Brown <lenb@kernel.org>
CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:3c:3 (6:60:3)
-CPUID(6): APERF, DTS, PTM, EPB
+CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM TM
+CPUID(6): APERF, TURBO, DTS, PTM, No-HWP, No-HWPnotify, No-HWPwindow, No-HWPepp, No-HWPpkg, EPB
+cpu4: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO)
+CPUID(7): No-SGX
+cpu4: MSR_MISC_PWR_MGMT: 0x00400000 (ENable-EIST_Coordination DISable-EPB DISable-OOB)
RAPL: 3121 sec. Joule Counter Range, at 84 Watts
-cpu0: MSR_NHM_PLATFORM_INFO: 0x80838f3012300
-8 * 100 = 800 MHz max efficiency
-35 * 100 = 3500 MHz TSC frequency
-cpu0: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
-cpu0: MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0)
-cpu0: MSR_TURBO_RATIO_LIMIT: 0x25262727
-37 * 100 = 3700 MHz max turbo 4 active cores
-38 * 100 = 3800 MHz max turbo 3 active cores
-39 * 100 = 3900 MHz max turbo 2 active cores
-39 * 100 = 3900 MHz max turbo 1 active cores
+cpu4: MSR_PLATFORM_INFO: 0x80838f3012300
+8 * 100.0 = 800.0 MHz max efficiency frequency
+35 * 100.0 = 3500.0 MHz base frequency
+cpu4: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
+cpu4: MSR_TURBO_RATIO_LIMIT: 0x25262727
+37 * 100.0 = 3700.0 MHz max turbo 4 active cores
+38 * 100.0 = 3800.0 MHz max turbo 3 active cores
+39 * 100.0 = 3900.0 MHz max turbo 2 active cores
+39 * 100.0 = 3900.0 MHz max turbo 1 active cores
+cpu4: MSR_CONFIG_TDP_NOMINAL: 0x00000023 (base_ratio=35)
+cpu4: MSR_CONFIG_TDP_LEVEL_1: 0x00000000 ()
+cpu4: MSR_CONFIG_TDP_LEVEL_2: 0x00000000 ()
+cpu4: MSR_CONFIG_TDP_CONTROL: 0x80000000 ( lock=1)
+cpu4: MSR_TURBO_ACTIVATION_RATIO: 0x00000000 (MAX_NON_TURBO_RATIO=0 lock=0)
+cpu4: MSR_PKG_CST_CONFIG_CONTROL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0)
+cpu4: POLL: CPUIDLE CORE POLL IDLE
+cpu4: C1: MWAIT 0x00
+cpu4: C1E: MWAIT 0x01
+cpu4: C3: MWAIT 0x10
+cpu4: C6: MWAIT 0x20
+cpu4: C7s: MWAIT 0x32
+cpu4: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch)
cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced)
-cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Auto-HWP, Amps, MultiCoreTurbo, Transitions, )
+cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Transitions, MultiCoreTurbo, Amps, Auto-HWP, )
cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x00000000 (Active: ) (Logged: )
cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d000000 (Active: ) (Logged: Amps, PkgPwrL1, PkgPwrL2, )
cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
@@ -162,23 +230,14 @@ cpu0: MSR_PP1_POLICY: 0
cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C)
-cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x88340800 (48 C)
-cpu0: MSR_IA32_THERM_STATUS: 0x88340000 (48 C +/- 1)
-cpu1: MSR_IA32_THERM_STATUS: 0x88440000 (32 C +/- 1)
-cpu2: MSR_IA32_THERM_STATUS: 0x88450000 (31 C +/- 1)
-cpu3: MSR_IA32_THERM_STATUS: 0x88490000 (27 C +/- 1)
- Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp PkgWatt CorWatt GFXWatt
- - - 493 12.64 3898 3498 0 12.64 0.00 0.00 74.72 47 47 21.62 13.74 0.00
- 0 0 4 0.11 3894 3498 0 99.89 0.00 0.00 0.00 47 47 21.62 13.74 0.00
- 0 4 3897 99.98 3898 3498 0 0.02
- 1 1 7 0.17 3887 3498 0 0.04 0.00 0.00 99.79 32
- 1 5 0 0.00 3885 3498 0 0.21
- 2 2 29 0.76 3895 3498 0 0.10 0.01 0.01 99.13 32
- 2 6 2 0.06 3896 3498 0 0.80
- 3 3 1 0.02 3832 3498 0 0.03 0.00 0.00 99.95 28
- 3 7 0 0.00 3879 3498 0 0.04
-^C
-
+cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884c0800 (24 C)
+cpu0: MSR_IA32_THERM_STATUS: 0x884c0000 (24 C +/- 1)
+cpu1: MSR_IA32_THERM_STATUS: 0x88510000 (19 C +/- 1)
+cpu2: MSR_IA32_THERM_STATUS: 0x884e0000 (22 C +/- 1)
+cpu3: MSR_IA32_THERM_STATUS: 0x88510000 (19 C +/- 1)
+cpu4: MSR_PKGC3_IRTL: 0x00008842 (valid, 67584 ns)
+cpu4: MSR_PKGC6_IRTL: 0x00008873 (valid, 117760 ns)
+cpu4: MSR_PKGC7_IRTL: 0x00008891 (valid, 148480 ns)
.fi
The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
available at the minimum package voltage. The \fBTSC frequency\fP is the base
@@ -188,39 +247,22 @@ should be sustainable on all CPUs indefinitely, given nominal power and cooling.
The remaining rows show what maximum turbo frequency is possible
depending on the number of idle cores. Note that not all information is
available on all processors.
-.SH FORK EXAMPLE
-If turbostat is invoked with a command, it will fork that command
-and output the statistics gathered after the command exits.
-In this case, turbostat output goes to stderr, by default.
-Output can instead be saved to a file using the --out option.
-eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
-until ^C while the other CPUs are mostly idle:
-
+.SH ADD COUNTER EXAMPLE
+Here we limit turbostat to showing just the CPU number for cpu0 - cpu3.
+We add a counter showing the 32-bit raw value of MSR 0x199 (MSR_IA32_PERF_CTL),
+labeling it with the column header, "PRF_CTRL", and display it only once,
+afte the conclusion of a 0.1 second sleep.
.nf
-root@hsw: turbostat cat /dev/zero > /dev/null
-^C
- CPU Avg_MHz Busy% Bzy_MHz TSC_MHz
- - 482 12.51 3854 3498
- 0 0 0.01 1960 3498
- 4 0 0.00 2128 3498
- 1 0 0.00 3003 3498
- 5 3854 99.98 3855 3498
- 2 0 0.01 3504 3498
- 6 3 0.08 3884 3498
- 3 0 0.00 2553 3498
- 7 0 0.00 2126 3498
-10.783983 sec
+sudo ./turbostat --quiet --cpu 0-3 --show CPU --add msr0x199,u32,raw,PRF_CTRL sleep .1
+0.101604 sec
+CPU PRF_CTRL
+- 0x00000000
+0 0x00000c00
+1 0x00000800
+2 0x00000a00
+3 0x00000800
.fi
-Above the cycle soaker drives cpu5 up its 3.9 GHz turbo limit.
-The first row shows the average MHz and Busy% across all the processors in the system.
-
-Note that the Avg_MHz column reflects the total number of cycles executed
-divided by the measurement interval. If the Busy% column is 100%,
-then the processor was running at that speed the entire interval.
-The Avg_MHz multiplied by the Busy% results in the Bzy_MHz --
-which is the average frequency while the processor was executing --
-not including any non-busy idle time.
.SH NOTES
--
2.11.0.161.g6610af872
next prev parent reply other threads:[~2017-03-01 5:31 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-01 5:27 [GIT PULL] turbostat 17.02.24 Len Brown
2017-03-01 5:27 ` [PATCH 01/44] tools/power turbostat: fix bugs in --add option Len Brown
2017-03-01 5:27 ` [PATCH 02/44] tools/power turbostat: Add --show and --hide parameters Len Brown
2017-03-01 5:27 ` [PATCH 03/44] tools/power turbostat: BYT does not have MSR_MISC_PWR_MGMT Len Brown
2017-03-01 5:27 ` [PATCH 04/44] tools/power turbostat: decode Baytrail CC6 and MC6 demotion configuration Len Brown
2017-03-01 5:27 ` [PATCH 05/44] tools/power turbostat: Baytrail: remove debug line in quiet mode Len Brown
2017-03-01 5:27 ` [PATCH 06/44] tools/power turbostat: update MSR_PKG_CST_CONFIG_CONTROL decoding Len Brown
2017-03-01 5:27 ` [PATCH 07/44] x86: msr-index.h: Define MSR_PKG_CST_CONFIG_CONTROL Len Brown
2017-03-01 5:27 ` [PATCH 08/44] intel_idle: use new name for MSR_PKG_CST_CONFIG_CONTROL Len Brown
2017-03-01 5:27 ` [PATCH 09/44] tools/power turbostat: " Len Brown
2017-03-01 5:27 ` [PATCH 10/44] x86: msr-index.h: Remove unused MSR_NHM_SNB_PKG_CST_CFG_CTL Len Brown
2017-03-01 5:27 ` [PATCH 11/44] tools/power turbostat: Baytrail c-state support Len Brown
2017-03-01 5:27 ` [PATCH 12/44] tools/power turbostat: add precision to --debug frequency output Len Brown
2017-03-01 5:27 ` [PATCH 13/44] tools/power turbostat: further decode MSR_IA32_MISC_ENABLE Len Brown
2017-03-01 5:27 ` [PATCH 14/44] x86 msr-index.h: Define Atom specific core ratio MSR locations Len Brown
2017-03-01 5:27 ` [PATCH 15/44] intel_pstate: use MSR_ATOM_RATIOS definitions from msr-index.h Len Brown
2017-03-01 5:27 ` [PATCH 16/44] tools/power turbostat: dump Atom P-states correctly Len Brown
2017-03-01 5:27 ` [PATCH 17/44] tools/power turbostat: decode CPUID(6).TURBO Len Brown
2017-03-01 5:27 ` [PATCH 18/44] x86 msr_index.h: Define MSR_MISC_FEATURE_CONTROL Len Brown
2017-03-01 5:27 ` [PATCH 19/44] tools/power turbostat: decode MSR_MISC_FEATURE_CONTROL Len Brown
2017-03-01 5:27 ` [PATCH 20/44] tools/power turbostat: show all columns, independent of --debug Len Brown
2017-03-01 5:27 ` [PATCH 21/44] tools/power turbostat: print system config, unless --quiet Len Brown
2017-03-01 5:27 ` [PATCH 22/44] tools/power turbostat: use tsc_tweak everwhere it is needed Len Brown
2017-03-01 5:27 ` [PATCH 23/44] tools/power turbostat: bug fixes to --add, --show/--hide features Len Brown
2017-03-01 5:27 ` [PATCH 24/44] x86: intel-family.h: Add GEMINI_LAKE SOC Len Brown
2017-03-01 23:48 ` Andy Shevchenko
2017-03-01 5:27 ` [PATCH 25/44] tools/power turbostat: initial Gemini Lake SOC support Len Brown
2017-03-01 5:27 ` [PATCH 26/44] tools/power turbostat: Denverton: use HW CC1 counter, skip C3, C7 Len Brown
2017-03-01 5:27 ` [PATCH 27/44] tools/power turbostat: skip unused counters on SKX Len Brown
2017-03-01 5:27 ` [PATCH 28/44] tools/power turbostat: fix decoding for GLM, DNV, SKX turbo-ratio limits Len Brown
2017-03-01 5:27 ` [PATCH 29/44] tools/power turbostat: skip unused counters on BDX Len Brown
2017-03-01 5:27 ` [PATCH 30/44] tools/power turbostat: extend --add option to accept /sys path Len Brown
2017-03-01 5:27 ` [PATCH 31/44] tools/power turbostat: print sysfs C-state stats Len Brown
2017-03-01 5:27 ` [PATCH 32/44] tools/power turbostat: add --cpu parameter Len Brown
2017-03-01 5:27 ` [PATCH 33/44] tools/power turbostat: fix zero IRQ count shown in one-shot command mode Len Brown
2017-03-01 5:27 ` [PATCH 34/44] tools/power turbostat: Add --list option to show available header names Len Brown
2017-03-01 5:27 ` [PATCH 35/44] tools/power turbostat: use wide columns to display large numbers Len Brown
2017-03-01 5:27 ` [PATCH 36/44] tools/power turbostat: update --list feature Len Brown
2017-03-01 5:27 ` Len Brown [this message]
2017-03-01 5:27 ` [PATCH 37/44] tools/power turbostat: turbostat.8 update Len Brown
2017-03-01 5:27 ` [PATCH 38/44] tools/power turbostat: move --Package and --processor into the --cpu option Len Brown
2017-03-01 5:27 ` [PATCH 39/44] tools/power turbostat: support "--hide C1" etc Len Brown
2017-03-01 5:27 ` [PATCH 40/44] tools/power turbostat: show package number, even without --debug Len Brown
2017-03-01 5:27 ` [PATCH 41/44] tools/power turbostat: dump p-state software config Len Brown
2017-03-01 5:27 ` [PATCH 42/44] tools/power turbostat: show error on exec Len Brown
2017-03-01 5:27 ` [PATCH 43/44] tools/power turbostat: bugfix: --add u32 was printed as u64 Len Brown
2017-03-01 5:27 ` [PATCH 44/44] tools/power turbostat: version 17.02.24 Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da67e2b9fd1d846a41978690da0a899d8e4378ec.1488345270.git.len.brown@intel.com \
--to=lenb@kernel.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.