dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Binbin Wu <binbin.wu@intel.com>
To: rjw@rjwysocki.net, linux-pm@vger.kernel.org,
	gregkh@linuxfoundation.org, lee.jones@linaro.org,
	mika.westerberg@linux.intel.com, linux-kernel@vger.kernel.org,
	dmaengine@vger.kernel.org, andriy.shevchenko@linux.intel.com
Cc: binbin.wu@intel.com
Subject: [v2] mfd: intel-lpss: Set the device in reset state when init
Date: Mon,  8 Apr 2019 16:09:10 +0800	[thread overview]
Message-ID: <1554710950-21212-1-git-send-email-binbin.wu@intel.com> (raw)

In virtualized setup, when system reboots due to warm
reset interrupt storm is seen.

Call Trace:
<IRQ>
dump_stack+0x70/0xa5
__report_bad_irq+0x2e/0xc0
note_interrupt+0x248/0x290
? add_interrupt_randomness+0x30/0x220
handle_irq_event_percpu+0x54/0x80
handle_irq_event+0x39/0x60
handle_fasteoi_irq+0x91/0x150
handle_irq+0x108/0x180
do_IRQ+0x52/0xf0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0033:0x76fc2cfabc1d
Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e
94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18
<48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04
24
RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda
RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce
RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010
RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0
R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0
R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414
handlers:
[<000000000d3fa913>] idma64_irq
Disabling IRQ #27

To avoid interrupt storm, set the device in reset state
before bringing out the device from reset state.

Changelog v2:
- correct the subject line by adding "mfd: "

Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/mfd/intel-lpss.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c
index 50bffc3..ff3fba1 100644
--- a/drivers/mfd/intel-lpss.c
+++ b/drivers/mfd/intel-lpss.c
@@ -273,6 +273,9 @@ static void intel_lpss_init_dev(const struct intel_lpss *lpss)
 {
 	u32 value = LPSS_PRIV_SSP_REG_DIS_DMA_FIN;
 
+	/* Set the device in reset state */
+	writel(0, lpss->priv + LPSS_PRIV_RESETS);
+
 	intel_lpss_deassert_reset(lpss);
 
 	intel_lpss_set_remap_addr(lpss);

WARNING: multiple messages have this Message-ID (diff)
From: Binbin Wu <binbin.wu@intel.com>
To: rjw@rjwysocki.net, linux-pm@vger.kernel.org,
	gregkh@linuxfoundation.org, lee.jones@linaro.org,
	mika.westerberg@linux.intel.com, linux-kernel@vger.kernel.org,
	dmaengine@vger.kernel.org, andriy.shevchenko@linux.intel.com
Cc: binbin.wu@intel.com
Subject: [PATCH v2] mfd: intel-lpss: Set the device in reset state when init
Date: Mon,  8 Apr 2019 16:09:10 +0800	[thread overview]
Message-ID: <1554710950-21212-1-git-send-email-binbin.wu@intel.com> (raw)
Message-ID: <20190408080910.EARU56_EiBmOzz4UGpvEeKp2nlM0h6jg4V8IAFTVvxc@z> (raw)

In virtualized setup, when system reboots due to warm
reset interrupt storm is seen.

Call Trace:
<IRQ>
dump_stack+0x70/0xa5
__report_bad_irq+0x2e/0xc0
note_interrupt+0x248/0x290
? add_interrupt_randomness+0x30/0x220
handle_irq_event_percpu+0x54/0x80
handle_irq_event+0x39/0x60
handle_fasteoi_irq+0x91/0x150
handle_irq+0x108/0x180
do_IRQ+0x52/0xf0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0033:0x76fc2cfabc1d
Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e
94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18
<48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04
24
RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda
RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce
RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010
RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0
R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0
R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414
handlers:
[<000000000d3fa913>] idma64_irq
Disabling IRQ #27

To avoid interrupt storm, set the device in reset state
before bringing out the device from reset state.

Changelog v2:
- correct the subject line by adding "mfd: "

Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/mfd/intel-lpss.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c
index 50bffc3..ff3fba1 100644
--- a/drivers/mfd/intel-lpss.c
+++ b/drivers/mfd/intel-lpss.c
@@ -273,6 +273,9 @@ static void intel_lpss_init_dev(const struct intel_lpss *lpss)
 {
 	u32 value = LPSS_PRIV_SSP_REG_DIS_DMA_FIN;
 
+	/* Set the device in reset state */
+	writel(0, lpss->priv + LPSS_PRIV_RESETS);
+
 	intel_lpss_deassert_reset(lpss);
 
 	intel_lpss_set_remap_addr(lpss);
-- 
2.7.4


             reply	other threads:[~2019-04-08  8:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-08  8:09 Binbin Wu [this message]
2019-04-08  8:09 ` [PATCH v2] mfd: intel-lpss: Set the device in reset state when init Binbin Wu
2019-04-09 15:36 ` [v2] " Andy Shevchenko
2019-04-09 15:36   ` [PATCH v2] " Andy Shevchenko
2019-05-08  8:23 ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1554710950-21212-1-git-send-email-binbin.wu@intel.com \
    --to=binbin.wu@intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).