dmaengine Archive on lore.kernel.org
 help / color / Atom feed
From: Amit Singh Tomar <amittomer25@gmail.com>
To: andre.przywara@arm.com, vkoul@kernel.org, afaerber@suse.de,
	manivannan.sadhasivam@linaro.org
Cc: dan.j.williams@intel.com, cristian.ciocaltea@gmail.com,
	dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-actions@lists.infradead.org
Subject: [PATCH v4 02/10] dmaengine: Actions: Add support for S700 DMA engine
Date: Tue,  9 Jun 2020 15:47:02 +0530
Message-ID: <1591697830-16311-3-git-send-email-amittomer25@gmail.com> (raw)
In-Reply-To: <1591697830-16311-1-git-send-email-amittomer25@gmail.com>

DMA controller present on S700 SoC is compatible with the one on S900
(as most of registers are same), but it has different DMA descriptor
structure where registers "fcnt" and "ctrlb" uses different encoding.

For instance, on S900 "fcnt" starts at offset 0x0c and uses upper 12
bits whereas on S700, it starts at offset 0x1c and uses lower 12 bits.

This commit adds support for DMA controller present on S700.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v3:
	* Provided detailed comment about, the way
	  shared DMA descriptor fields are programmed.
        * Fixed following clang compilation warning:
	  warning: cast to smaller integer type 'enum owl_dma_id' from 'const void *'
	  [-Wvoid-pointer-to-enum-cast]
Changes since v2:
	* No changes.
Changes since v1:
	* Moved llc_hw_flen() to patch 1/9.
	* provided comments about dma descriptor difference.
	  between S700 and S900.
Changes since RFC:
	* Added accessor function to get the frame lenght.
	* Removed the SoC specific check in IRQ routine.
---
 drivers/dma/owl-dma.c | 59 ++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 44 insertions(+), 15 deletions(-)

diff --git a/drivers/dma/owl-dma.c b/drivers/dma/owl-dma.c
index 948d1bead860..f0c5425c06e7 100644
--- a/drivers/dma/owl-dma.c
+++ b/drivers/dma/owl-dma.c
@@ -149,6 +149,11 @@ enum owl_dmadesc_offsets {
 	OWL_DMADESC_SIZE
 };
 
+enum owl_dma_id {
+	S900_DMA,
+	S700_DMA,
+};
+
 /**
  * struct owl_dma_lli - Link list for dma transfer
  * @hw: hardware link list
@@ -213,6 +218,7 @@ struct owl_dma_vchan {
  * @pchans: array of data for the physical channels
  * @nr_vchans: the number of physical channels
  * @vchans: array of data for the physical channels
+ * @devid: device id based on OWL SoC
  */
 struct owl_dma {
 	struct dma_device	dma;
@@ -227,6 +233,7 @@ struct owl_dma {
 
 	unsigned int		nr_vchans;
 	struct owl_dma_vchan	*vchans;
+	enum owl_dma_id		devid;
 };
 
 static void pchan_update(struct owl_dma_pchan *pchan, u32 reg,
@@ -316,6 +323,10 @@ static inline u32 llc_hw_ctrlb(u32 int_ctl)
 {
 	u32 ctl;
 
+	/*
+	 * Irrespective of the SoC, ctrlb value starts filling from
+	 * bit 18.
+	 */
 	ctl = BIT_FIELD(int_ctl, 7, 0, 18);
 
 	return ctl;
@@ -372,6 +383,7 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 				  struct dma_slave_config *sconfig,
 				  bool is_cyclic)
 {
+	struct owl_dma *od = to_owl_dma(vchan->vc.chan.device);
 	u32 mode, ctrlb;
 
 	mode = OWL_DMA_MODE_PW(0);
@@ -427,14 +439,26 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 	lli->hw[OWL_DMADESC_DADDR] = dst;
 	lli->hw[OWL_DMADESC_SRC_STRIDE] = 0;
 	lli->hw[OWL_DMADESC_DST_STRIDE] = 0;
-	/*
-	 * Word starts from offset 0xC is shared between frame length
-	 * (max frame length is 1MB) and frame count, where first 20
-	 * bits are for frame length and rest of 12 bits are for frame
-	 * count.
-	 */
-	lli->hw[OWL_DMADESC_FLEN] = len | FCNT_VAL << 20;
-	lli->hw[OWL_DMADESC_CTRLB] = ctrlb;
+
+	if (od->devid == S700_DMA) {
+		/* Max frame length is 1MB */
+		lli->hw[OWL_DMADESC_FLEN] = len;
+		/*
+		 * On S700, word starts from offset 0x1C is shared between
+		 * frame count and ctrlb, where first 12 bits are for frame
+		 * count and rest of 20 bits are for ctrlb.
+		 */
+		lli->hw[OWL_DMADESC_CTRLB] = FCNT_VAL | ctrlb;
+	} else {
+		/*
+		 * On S900, word starts from offset 0xC is shared between
+		 * frame length (max frame length is 1MB) and frame count,
+		 * where first 20 bits are for frame length and rest of
+		 * 12 bits are for frame count.
+		 */
+		lli->hw[OWL_DMADESC_FLEN] = len | FCNT_VAL << 20;
+		lli->hw[OWL_DMADESC_CTRLB] = ctrlb;
+	}
 
 	return 0;
 }
@@ -596,7 +620,7 @@ static irqreturn_t owl_dma_interrupt(int irq, void *dev_id)
 
 		global_irq_pending = dma_readl(od, OWL_DMA_IRQ_PD0);
 
-		if (chan_irq_pending && !(global_irq_pending & BIT(i)))	{
+		if (chan_irq_pending && !(global_irq_pending & BIT(i))) {
 			dev_dbg(od->dma.dev,
 				"global and channel IRQ pending match err\n");
 
@@ -1054,11 +1078,20 @@ static struct dma_chan *owl_dma_of_xlate(struct of_phandle_args *dma_spec,
 	return chan;
 }
 
+static const struct of_device_id owl_dma_match[] = {
+	{ .compatible = "actions,s900-dma", .data = (void *)S900_DMA,},
+	{ .compatible = "actions,s700-dma", .data = (void *)S700_DMA,},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, owl_dma_match);
+
 static int owl_dma_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct owl_dma *od;
 	int ret, i, nr_channels, nr_requests;
+	const struct of_device_id *of_id =
+				of_match_device(owl_dma_match, &pdev->dev);
 
 	od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
 	if (!od)
@@ -1083,6 +1116,8 @@ static int owl_dma_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "dma-channels %d, dma-requests %d\n",
 		 nr_channels, nr_requests);
 
+	od->devid = (enum owl_dma_id)(uintptr_t)of_id->data;
+
 	od->nr_pchans = nr_channels;
 	od->nr_vchans = nr_requests;
 
@@ -1215,12 +1250,6 @@ static int owl_dma_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id owl_dma_match[] = {
-	{ .compatible = "actions,s900-dma", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, owl_dma_match);
-
 static struct platform_driver owl_dma_driver = {
 	.probe	= owl_dma_probe,
 	.remove	= owl_dma_remove,
-- 
2.7.4


  parent reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1591697830-16311-1-git-send-email-amittomer25@gmail.com>
2020-06-09 10:17 ` [PATCH v4 01/10] dmaengine: Actions: get rid of bit fields from dma descriptor Amit Singh Tomar
2020-06-09 10:17 ` Amit Singh Tomar [this message]
2020-06-24  6:15   ` [PATCH v4 02/10] dmaengine: Actions: Add support for S700 DMA engine Vinod Koul
2020-06-24  9:35     ` André Przywara
2020-06-29  8:28       ` Amit Tomer
2020-06-29  9:54       ` Vinod Koul
2020-06-29 11:19         ` André Przywara
2020-06-29 13:21           ` Vinod Koul
2020-06-29  8:19     ` Amit Tomer
2020-06-29  9:52       ` Vinod Koul
2020-06-30  9:47         ` Amit Tomer
2020-06-30 14:24           ` Vinod Koul
2020-06-30 18:14             ` Amit Tomer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1591697830-16311-3-git-send-email-amittomer25@gmail.com \
    --to=amittomer25@gmail.com \
    --cc=afaerber@suse.de \
    --cc=andre.przywara@arm.com \
    --cc=cristian.ciocaltea@gmail.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git