dmaengine Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>, <robh+dt@kernel.org>
Cc: <dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<dan.j.williams@intel.com>, <devicetree@vger.kernel.org>
Subject: [PATCH v2 3/3] dmaengine: ti: edma: Add support for handling reserved channels
Date: Tue, 10 Sep 2019 14:45:59 +0300
Message-ID: <20190910114559.22810-4-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20190910114559.22810-1-peter.ujfalusi@ti.com>

Like paRAM slots, channels could be used by other cores and in this case
we need to make sure that the driver do not alter these channels.

Handle the generic dma-channel-mask property to mark channels in a bitmap
which can not be used by Linux and convert the legacy rsv_chans if it is
provided by platform_data.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/dma/ti/edma.c | 59 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 53 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index ba7c4f07fcd6..03c9c6296006 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -260,6 +260,13 @@ struct edma_cc {
 	 */
 	unsigned long *slot_inuse;
 
+	/*
+	 * For tracking reserved channels used by DSP.
+	 * If the bit is cleared, the channel is allocated to be used by DSP
+	 * and Linux must not touch it.
+	 */
+	unsigned long *channels_mask;
+
 	struct dma_device		dma_slave;
 	struct dma_device		*dma_memcpy;
 	struct edma_chan		*slave_chans;
@@ -716,6 +723,12 @@ static int edma_alloc_channel(struct edma_chan *echan,
 	struct edma_cc *ecc = echan->ecc;
 	int channel = EDMA_CHAN_SLOT(echan->ch_num);
 
+	if (!test_bit(echan->ch_num, ecc->channels_mask)) {
+		dev_err(ecc->dev, "Channel%d is reserved, can not be used!\n",
+			echan->ch_num);
+		return -EINVAL;
+	}
+
 	/* ensure access through shadow region 0 */
 	edma_or_array2(ecc, EDMA_DRAE, 0, EDMA_REG_ARRAY_INDEX(channel),
 		       EDMA_CHANNEL_BIT(channel));
@@ -2250,7 +2263,7 @@ static int edma_probe(struct platform_device *pdev)
 	struct edma_soc_info	*info = pdev->dev.platform_data;
 	s8			(*queue_priority_mapping)[2];
 	int			i, off;
-	const s16		(*rsv_slots)[2];
+	const s16		(*reserved)[2];
 	const s16		(*xbar_chans)[2];
 	int			irq;
 	char			*irq_name;
@@ -2331,15 +2344,32 @@ static int edma_probe(struct platform_device *pdev)
 	if (!ecc->slot_inuse)
 		return -ENOMEM;
 
+	ecc->channels_mask = devm_kcalloc(dev,
+					   BITS_TO_LONGS(ecc->num_channels),
+					   sizeof(unsigned long), GFP_KERNEL);
+	if (!ecc->channels_mask)
+		return -ENOMEM;
+
+	/* Mark all channels available initially */
+	bitmap_fill(ecc->channels_mask, ecc->num_channels);
+
 	ecc->default_queue = info->default_queue;
 
 	if (info->rsv) {
 		/* Set the reserved slots in inuse list */
-		rsv_slots = info->rsv->rsv_slots;
-		if (rsv_slots) {
-			for (i = 0; rsv_slots[i][0] != -1; i++)
-				bitmap_set(ecc->slot_inuse, rsv_slots[i][0],
-					   rsv_slots[i][1]);
+		reserved = info->rsv->rsv_slots;
+		if (reserved) {
+			for (i = 0; reserved[i][0] != -1; i++)
+				bitmap_set(ecc->slot_inuse, reserved[i][0],
+					   reserved[i][1]);
+		}
+
+		/* Clear channels not usable for Linux */
+		reserved = info->rsv->rsv_chans;
+		if (reserved) {
+			for (i = 0; reserved[i][0] != -1; i++)
+				bitmap_clear(ecc->channels_mask, reserved[i][0],
+					     reserved[i][1]);
 		}
 	}
 
@@ -2399,6 +2429,7 @@ static int edma_probe(struct platform_device *pdev)
 
 	if (!ecc->legacy_mode) {
 		int lowest_priority = 0;
+		unsigned int array_max;
 		struct of_phandle_args tc_args;
 
 		ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
@@ -2420,6 +2451,18 @@ static int edma_probe(struct platform_device *pdev)
 				info->default_queue = i;
 			}
 		}
+
+		/* See if we have optional dma-channel-mask array */
+		array_max = DIV_ROUND_UP(ecc->num_channels, BITS_PER_TYPE(u32));
+		ret = of_property_read_variable_u32_array(node,
+						"dma-channel-mask",
+						(u32 *)ecc->channels_mask,
+						1, array_max);
+		if (ret > 0 && ret != array_max)
+			dev_warn(dev, "dma-channel-mask is not complete.\n");
+		else if (ret == -EOVERFLOW || ret == -ENODATA)
+			dev_warn(dev,
+				 "dma-channel-mask is out of range or empty\n");
 	}
 
 	/* Event queue priority mapping */
@@ -2437,6 +2480,10 @@ static int edma_probe(struct platform_device *pdev)
 	edma_dma_init(ecc, legacy_mode);
 
 	for (i = 0; i < ecc->num_channels; i++) {
+		/* Do not touch reserved channels */
+		if (!test_bit(i, ecc->channels_mask))
+			continue;
+
 		/* Assign all channels to the default queue */
 		edma_assign_channel_eventq(&ecc->slave_chans[i],
 					   info->default_queue);
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


      parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-10 11:45 [PATCH v2 0/3] dmaengine: bindings/edma: dma-channel-mask to array Peter Ujfalusi
2019-09-10 11:45 ` [PATCH v2 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Peter Ujfalusi
2019-09-18 13:28   ` Rob Herring
2019-09-18 14:04     ` Peter Ujfalusi
2019-09-18 14:21       ` Rob Herring
2019-09-19  8:42         ` Peter Ujfalusi
2019-09-10 11:45 ` [PATCH v2 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA Peter Ujfalusi
2019-09-18 13:29   ` Rob Herring
2019-09-18 14:06     ` Peter Ujfalusi
2019-09-10 11:45 ` Peter Ujfalusi [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190910114559.22810-4-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git