dmaengine Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2] dmaengine: Fix Kconfig indentation
@ 2019-11-21  3:19 Krzysztof Kozlowski
  2019-11-22  5:46 ` Vinod Koul
  0 siblings, 1 reply; 2+ messages in thread
From: Krzysztof Kozlowski @ 2019-11-21  3:19 UTC (permalink / raw)
  To: linux-kernel; +Cc: Krzysztof Kozlowski, Dan Williams, Vinod Koul, dmaengine

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.
---
 drivers/dma/Kconfig | 60 ++++++++++++++++++++++++++---------------------------
 1 file changed, 30 insertions(+), 30 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 03dfee5c66d9..6fa1eba9d477 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -15,19 +15,19 @@ menuconfig DMADEVICES
 	  be empty in some cases.
 
 config DMADEVICES_DEBUG
-        bool "DMA Engine debugging"
-        depends on DMADEVICES != n
-        help
-          This is an option for use by developers; most people should
-          say N here.  This enables DMA engine core and driver debugging.
+	bool "DMA Engine debugging"
+	depends on DMADEVICES != n
+	help
+	  This is an option for use by developers; most people should
+	  say N here.  This enables DMA engine core and driver debugging.
 
 config DMADEVICES_VDEBUG
-        bool "DMA Engine verbose debugging"
-        depends on DMADEVICES_DEBUG != n
-        help
-          This is an option for use by developers; most people should
-          say N here.  This enables deeper (more verbose) debugging of
-          the DMA engine core and drivers.
+	bool "DMA Engine verbose debugging"
+	depends on DMADEVICES_DEBUG != n
+	help
+	  This is an option for use by developers; most people should
+	  say N here.  This enables deeper (more verbose) debugging of
+	  the DMA engine core and drivers.
 
 
 if DMADEVICES
@@ -215,28 +215,28 @@ config FSL_EDMA
 	  This module can be found on Freescale Vybrid and LS-1 SoCs.
 
 config FSL_QDMA
-       tristate "NXP Layerscape qDMA engine support"
-       depends on ARM || ARM64
-       select DMA_ENGINE
-       select DMA_VIRTUAL_CHANNELS
-       select DMA_ENGINE_RAID
-       select ASYNC_TX_ENABLE_CHANNEL_SWITCH
-       help
-         Support the NXP Layerscape qDMA engine with command queue and legacy mode.
-         Channel virtualization is supported through enqueuing of DMA jobs to,
-         or dequeuing DMA jobs from, different work queues.
-         This module can be found on NXP Layerscape SoCs.
+	tristate "NXP Layerscape qDMA engine support"
+	depends on ARM || ARM64
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	select DMA_ENGINE_RAID
+	select ASYNC_TX_ENABLE_CHANNEL_SWITCH
+	help
+	 Support the NXP Layerscape qDMA engine with command queue and legacy mode.
+	 Channel virtualization is supported through enqueuing of DMA jobs to,
+	 or dequeuing DMA jobs from, different work queues.
+	 This module can be found on NXP Layerscape SoCs.
 	  The qdma driver only work on  SoCs with a DPAA hardware block.
 
 config FSL_RAID
-        tristate "Freescale RAID engine Support"
-        depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
-        select DMA_ENGINE
-        select DMA_ENGINE_RAID
-        ---help---
-          Enable support for Freescale RAID Engine. RAID Engine is
-          available on some QorIQ SoCs (like P5020/P5040). It has
-          the capability to offload memcpy, xor and pq computation
+	tristate "Freescale RAID engine Support"
+	depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
+	select DMA_ENGINE
+	select DMA_ENGINE_RAID
+	---help---
+	  Enable support for Freescale RAID Engine. RAID Engine is
+	  available on some QorIQ SoCs (like P5020/P5040). It has
+	  the capability to offload memcpy, xor and pq computation
 	  for raid5/6.
 
 config IMG_MDC_DMA
-- 
2.7.4


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH v2] dmaengine: Fix Kconfig indentation
  2019-11-21  3:19 [PATCH v2] dmaengine: Fix Kconfig indentation Krzysztof Kozlowski
@ 2019-11-22  5:46 ` Vinod Koul
  0 siblings, 0 replies; 2+ messages in thread
From: Vinod Koul @ 2019-11-22  5:46 UTC (permalink / raw)
  To: Krzysztof Kozlowski; +Cc: linux-kernel, Dan Williams, dmaengine

On 21-11-19, 04:19, Krzysztof Kozlowski wrote:
> Adjust indentation from spaces to tab (+optional two spaces) as in
> coding style with command like:
> 	$ sed -e 's/^        /\t/' -i */Kconfig

Applied, thanks

-- 
~Vinod

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-21  3:19 [PATCH v2] dmaengine: Fix Kconfig indentation Krzysztof Kozlowski
2019-11-22  5:46 ` Vinod Koul

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git