dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>, <nm@ti.com>, <ssantosh@kernel.org>,
	<robh+dt@kernel.org>, <vigneshr@ti.com>
Cc: <dan.j.williams@intel.com>, <t-kristo@ti.com>,
	<lokeshvutla@ti.com>, <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<dmaengine@vger.kernel.org>
Subject: [PATCH 08/18] dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
Date: Wed, 30 Sep 2020 12:14:02 +0300	[thread overview]
Message-ID: <20200930091412.8020-9-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200930091412.8020-1-peter.ujfalusi@ti.com>

Rings in RING mode should be using the DMA device for DMA API as in this
mode the ringacc will not access the ring memory in any ways, but the DMA
is.

Fix up the ring configuration and set the dma_dev unconditionally and let
the ringacc driver to select the correct device to use for DMA API.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/dma/ti/k3-udma-glue.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
index a53bc4707ae8..f39825ce288a 100644
--- a/drivers/dma/ti/k3-udma-glue.c
+++ b/drivers/dma/ti/k3-udma-glue.c
@@ -280,6 +280,10 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev,
 		goto err;
 	}
 
+	/* Set the dma_dev for the rings to be configured */
+	cfg->tx_cfg.dma_dev = k3_udma_glue_tx_get_dma_device(tx_chn);
+	cfg->txcq_cfg.dma_dev = cfg->tx_cfg.dma_dev;
+
 	ret = k3_ringacc_ring_cfg(tx_chn->ringtx, &cfg->tx_cfg);
 	if (ret) {
 		dev_err(dev, "Failed to cfg ringtx %d\n", ret);
@@ -589,6 +593,10 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
 		goto err_rflow_put;
 	}
 
+	/* Set the dma_dev for the rings to be configured */
+	flow_cfg->rx_cfg.dma_dev = k3_udma_glue_rx_get_dma_device(rx_chn);
+	flow_cfg->rxfdq_cfg.dma_dev = flow_cfg->rx_cfg.dma_dev;
+
 	ret = k3_ringacc_ring_cfg(flow->ringrx, &flow_cfg->rx_cfg);
 	if (ret) {
 		dev_err(dev, "Failed to cfg ringrx %d\n", ret);
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


  parent reply	other threads:[~2020-09-30  9:15 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-30  9:13 [PATCH 00/18] dmaengine/soc: k3-udma: Add support for BCDMA and PKTDMA Peter Ujfalusi
2020-09-30  9:13 ` [PATCH 01/18] dmaengine: of-dma: Add support for optional router configuration callback Peter Ujfalusi
2020-10-07  5:44   ` Vinod Koul
2020-10-07  8:08     ` Peter Ujfalusi
2020-10-07 15:55       ` Vinod Koul
2020-10-08  6:41         ` Peter Ujfalusi
2020-10-28  5:55           ` Vinod Koul
2020-10-28  9:56             ` Peter Ujfalusi
2020-11-09 11:45               ` Vinod Koul
2020-11-09 12:09                 ` Peter Ujfalusi
2020-11-09 12:23                   ` Vinod Koul
2020-11-09 12:36                     ` Peter Ujfalusi
2020-09-30  9:13 ` [PATCH 02/18] dmaengine: Add support for per channel coherency handling Peter Ujfalusi
2020-09-30  9:13 ` [PATCH 03/18] dmaengine: doc: client: Update for dmaengine_get_dma_device() usage Peter Ujfalusi
2020-09-30  9:13 ` [PATCH 04/18] dmaengine: dmatest: Use dmaengine_get_dma_device Peter Ujfalusi
2020-09-30  9:13 ` [PATCH 05/18] dmaengine: ti: k3-udma: Wait for peer teardown completion if supported Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 06/18] dmaengine: ti: k3-udma: Add support for second resource range from sysfw Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 07/18] dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API Peter Ujfalusi
2020-10-07  6:53   ` Vinod Koul
2020-10-07  8:22     ` Peter Ujfalusi
2020-09-30  9:14 ` Peter Ujfalusi [this message]
2020-09-30  9:14 ` [PATCH 09/18] dt-bindings: dma: ti: Add document for K3 BCDMA Peter Ujfalusi
2020-10-01  6:49   ` Peter Ujfalusi
2020-10-06 19:23     ` Rob Herring
2020-10-06 19:29   ` Rob Herring
2020-10-07  9:09     ` Peter Ujfalusi
2020-10-07 15:46       ` Rob Herring
2020-10-08  8:40         ` Peter Ujfalusi
2020-10-08 19:15           ` Rob Herring
2020-10-09  8:06             ` Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 10/18] dt-bindings: dma: ti: Add document for K3 PKTDMA Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 11/18] dmaengine: ti: k3-psil: Extend psil_endpoint_config " Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 12/18] dmaengine: ti: k3-psil: Add initial map for AM64 Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 13/18] dmaengine: ti: Add support for k3 event routers Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 14/18] soc: ti: k3-ringacc: add AM64 DMA rings support Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 15/18] dmaengine: ti: k3-udma: Initial support for K3 BCDMA Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 16/18] dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 17/18] dmaengine: ti: k3-udma: Initial support for K3 PKTDMA Peter Ujfalusi
2020-09-30  9:14 ` [PATCH 18/18] dmaengine: ti: k3-udma-glue: Add " Peter Ujfalusi
2020-09-30 10:17 ` [PATCH 00/18] dmaengine/soc: k3-udma: Add support for BCDMA and PKTDMA Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200930091412.8020-9-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=vigneshr@ti.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).