* [PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels
@ 2021-04-29 6:58 quanyang.wang
2021-04-29 13:03 ` [kbuild] " Dan Carpenter
2021-04-30 0:36 ` Laurent Pinchart
0 siblings, 2 replies; 5+ messages in thread
From: quanyang.wang @ 2021-04-29 6:58 UTC (permalink / raw)
To: Vinod Koul, Hyun Kwon, Laurent Pinchart, Michal Simek, Tejas Upadhyay
Cc: dmaengine, linux-arm-kernel, linux-kernel, Quanyang Wang
From: Quanyang Wang <quanyang.wang@windriver.com>
In some scenarios (kdump), dpdma hardware irqs has been enabled when
calling request_irq in probe function, and then the dpdma irq handler
xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
this moment xdev->chan[i] hasn't been initialized. So let's call the
request_irq after initializing dma channels to avoid kdump kernel
crash as below:
[ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
[ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[ 3.704900] Mem abort info:
[ 3.704902] ESR = 0x96000005
[ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits
[ 3.704907] SET = 0, FnV = 0
[ 3.704912] EA = 0, S1PTW = 0
[ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
[ 3.715585] Data abort info:
[ 3.715587] ISV = 0, ISS = 0x00000005
[ 3.715589] CM = 0, WnR = 0
[ 3.715592] [000000000000012c] user address but active_mm is swapper
[ 3.715596] Internal error: Oops: 96000005 [#1] SMP
[ 3.715599] Modules linked in:
[ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
[ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
[ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
[ 3.798089] sp : ffffffc01186bdf0
[ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
[ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
[ 3.811996] x25: 0000000008000408 x24: 0000000000000003
[ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
[ 3.822604] x21: 0000000000000000 x20: 0000000008000408
[ 3.827908] x19: 0000000000000000 x18: 0000000000000010
[ 3.833212] x17: 0000000000000000 x16: 0000000000000000
[ 3.838516] x15: 0000000000000000 x14: ffffffc011291740
[ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
[ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
[ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
[ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
[ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000
[ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000
[ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c
[ 3.880948] Call trace:
[ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560
[ 3.888079] __handle_irq_event_percpu+0x5c/0x178
[ 3.892774] handle_irq_event_percpu+0x34/0x98
[ 3.897210] handle_irq_event+0x44/0xb8
[ 3.901030] handle_fasteoi_irq+0xd0/0x190
[ 3.905117] generic_handle_irq+0x30/0x48
[ 3.909111] __handle_domain_irq+0x64/0xc0
[ 3.913192] gic_handle_irq+0x78/0xa0
[ 3.916846] el1_irq+0xc4/0x180
[ 3.919982] cpuidle_enter_state+0x134/0x2f8
[ 3.924243] cpuidle_enter+0x38/0x50
[ 3.927810] call_cpuidle+0x1c/0x40
[ 3.931290] do_idle+0x20c/0x270
[ 3.934502] cpu_startup_entry+0x28/0x58
[ 3.938410] rest_init+0xbc/0xcc
[ 3.941631] arch_call_rest_init+0x10/0x1c
[ 3.945718] start_kernel+0x51c/0x558
Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
drivers/dma/xilinx/xilinx_dpdma.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
index 70b29bd079c9..0b599402c53f 100644
--- a/drivers/dma/xilinx/xilinx_dpdma.c
+++ b/drivers/dma/xilinx/xilinx_dpdma.c
@@ -1622,19 +1622,6 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
if (IS_ERR(xdev->reg))
return PTR_ERR(xdev->reg);
- xdev->irq = platform_get_irq(pdev, 0);
- if (xdev->irq < 0) {
- dev_err(xdev->dev, "failed to get platform irq\n");
- return xdev->irq;
- }
-
- ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
- dev_name(xdev->dev), xdev);
- if (ret) {
- dev_err(xdev->dev, "failed to request IRQ\n");
- return ret;
- }
-
ddev = &xdev->common;
ddev->dev = &pdev->dev;
@@ -1688,6 +1675,19 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
goto error_of_dma;
}
+ xdev->irq = platform_get_irq(pdev, 0);
+ if (xdev->irq < 0) {
+ dev_err(xdev->dev, "failed to get platform irq\n");
+ goto error_irq;
+ }
+
+ ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
+ dev_name(xdev->dev), xdev);
+ if (ret) {
+ dev_err(xdev->dev, "failed to request IRQ\n");
+ goto error_irq;
+ }
+
xilinx_dpdma_enable_irq(xdev);
xilinx_dpdma_debugfs_init(xdev);
@@ -1696,6 +1696,8 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
return 0;
+error_irq:
+ of_dma_controller_free(pdev->dev.of_node);
error_of_dma:
dma_async_device_unregister(ddev);
error_dma_async:
@@ -1704,8 +1706,6 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
for (i = 0; i < ARRAY_SIZE(xdev->chan); i++)
xilinx_dpdma_chan_remove(xdev->chan[i]);
- free_irq(xdev->irq, xdev);
-
return ret;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [kbuild] Re: [PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels
2021-04-29 6:58 [PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels quanyang.wang
@ 2021-04-29 13:03 ` Dan Carpenter
2021-04-30 0:36 ` Laurent Pinchart
1 sibling, 0 replies; 5+ messages in thread
From: Dan Carpenter @ 2021-04-29 13:03 UTC (permalink / raw)
To: kbuild, quanyang.wang, Vinod Koul, Hyun Kwon, Laurent Pinchart,
Michal Simek, Tejas Upadhyay
Cc: lkp, kbuild-all, dmaengine, linux-arm-kernel, linux-kernel,
Quanyang Wang
Hi,
url: https://github.com/0day-ci/linux/commits/quanyang-wang-windriver-com/dmaengine-xilinx-dpdma-request_irq-after-initializing-dma-channels/20210429-150050
base: https://github.com/Xilinx/linux-xlnx master
config: x86_64-randconfig-m001-20210429 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
smatch warnings:
drivers/dma/xilinx/xilinx_dpdma.c:1778 xilinx_dpdma_probe() warn: missing error code 'ret'
vim +/ret +1778 drivers/dma/xilinx/xilinx_dpdma.c
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1694 static int xilinx_dpdma_probe(struct platform_device *pdev)
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1695 {
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1696 struct xilinx_dpdma_device *xdev;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1697 struct dma_device *ddev;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1698 unsigned int i;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1699 int ret;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1700
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1701 xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1702 if (!xdev)
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1703 return -ENOMEM;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1704
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1705 xdev->dev = &pdev->dev;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1706 xdev->ext_addr = sizeof(dma_addr_t) > 4;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1707
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1708 INIT_LIST_HEAD(&xdev->common.channels);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1709
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1710 platform_set_drvdata(pdev, xdev);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1711
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1712 xdev->axi_clk = devm_clk_get(xdev->dev, "axi_clk");
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1713 if (IS_ERR(xdev->axi_clk))
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1714 return PTR_ERR(xdev->axi_clk);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1715
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1716 xdev->reg = devm_platform_ioremap_resource(pdev, 0);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1717 if (IS_ERR(xdev->reg))
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1718 return PTR_ERR(xdev->reg);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1719
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1720 ddev = &xdev->common;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1721 ddev->dev = &pdev->dev;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1722
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1723 dma_cap_set(DMA_SLAVE, ddev->cap_mask);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1724 dma_cap_set(DMA_PRIVATE, ddev->cap_mask);
b305dd098dae4f Rohit Visavalia 2021-04-07 1725 dma_cap_set(DMA_CYCLIC, ddev->cap_mask);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1726 dma_cap_set(DMA_INTERLEAVE, ddev->cap_mask);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1727 dma_cap_set(DMA_REPEAT, ddev->cap_mask);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1728 dma_cap_set(DMA_LOAD_EOT, ddev->cap_mask);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1729 ddev->copy_align = fls(XILINX_DPDMA_ALIGN_BYTES - 1);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1730
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1731 ddev->device_alloc_chan_resources = xilinx_dpdma_alloc_chan_resources;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1732 ddev->device_free_chan_resources = xilinx_dpdma_free_chan_resources;
b305dd098dae4f Rohit Visavalia 2021-04-07 1733 ddev->device_prep_dma_cyclic = xilinx_dpdma_prep_dma_cyclic;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1734 ddev->device_prep_interleaved_dma = xilinx_dpdma_prep_interleaved_dma;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1735 /* TODO: Can we achieve better granularity ? */
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1736 ddev->device_tx_status = dma_cookie_status;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1737 ddev->device_issue_pending = xilinx_dpdma_issue_pending;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1738 ddev->device_config = xilinx_dpdma_config;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1739 ddev->device_pause = xilinx_dpdma_pause;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1740 ddev->device_resume = xilinx_dpdma_resume;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1741 ddev->device_terminate_all = xilinx_dpdma_terminate_all;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1742 ddev->device_synchronize = xilinx_dpdma_synchronize;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1743 ddev->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1744 ddev->directions = BIT(DMA_MEM_TO_DEV);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1745 ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1746
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1747 for (i = 0; i < ARRAY_SIZE(xdev->chan); ++i) {
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1748 ret = xilinx_dpdma_chan_init(xdev, i);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1749 if (ret < 0) {
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1750 dev_err(xdev->dev, "failed to initialize channel %u\n",
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1751 i);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1752 goto error;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1753 }
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1754 }
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1755
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1756 ret = clk_prepare_enable(xdev->axi_clk);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1757 if (ret) {
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1758 dev_err(xdev->dev, "failed to enable the axi clock\n");
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1759 goto error;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1760 }
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1761
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1762 ret = dma_async_device_register(ddev);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1763 if (ret) {
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1764 dev_err(xdev->dev, "failed to register the dma device\n");
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1765 goto error_dma_async;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1766 }
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1767
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1768 ret = of_dma_controller_register(xdev->dev->of_node,
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1769 of_dma_xilinx_xlate, ddev);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1770 if (ret) {
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1771 dev_err(xdev->dev, "failed to register DMA to DT DMA helper\n");
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1772 goto error_of_dma;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1773 }
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1774
50d6be0a1d25af Quanyang Wang 2021-04-29 1775 xdev->irq = platform_get_irq(pdev, 0);
50d6be0a1d25af Quanyang Wang 2021-04-29 1776 if (xdev->irq < 0) {
50d6be0a1d25af Quanyang Wang 2021-04-29 1777 dev_err(xdev->dev, "failed to get platform irq\n");
50d6be0a1d25af Quanyang Wang 2021-04-29 @1778 goto error_irq;
ret = xdev->irq;
50d6be0a1d25af Quanyang Wang 2021-04-29 1779 }
50d6be0a1d25af Quanyang Wang 2021-04-29 1780
50d6be0a1d25af Quanyang Wang 2021-04-29 1781 ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
50d6be0a1d25af Quanyang Wang 2021-04-29 1782 dev_name(xdev->dev), xdev);
50d6be0a1d25af Quanyang Wang 2021-04-29 1783 if (ret) {
50d6be0a1d25af Quanyang Wang 2021-04-29 1784 dev_err(xdev->dev, "failed to request IRQ\n");
50d6be0a1d25af Quanyang Wang 2021-04-29 1785 goto error_irq;
50d6be0a1d25af Quanyang Wang 2021-04-29 1786 }
50d6be0a1d25af Quanyang Wang 2021-04-29 1787
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1788 xilinx_dpdma_enable_irq(xdev);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1789
1d220435cab3bf Laurent Pinchart 2020-08-12 1790 xilinx_dpdma_debugfs_init(xdev);
1d220435cab3bf Laurent Pinchart 2020-08-12 1791
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1792 dev_info(&pdev->dev, "Xilinx DPDMA engine is probed\n");
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1793
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1794 return 0;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1795
50d6be0a1d25af Quanyang Wang 2021-04-29 1796 error_irq:
50d6be0a1d25af Quanyang Wang 2021-04-29 1797 of_dma_controller_free(pdev->dev.of_node);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1798 error_of_dma:
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1799 dma_async_device_unregister(ddev);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1800 error_dma_async:
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1801 clk_disable_unprepare(xdev->axi_clk);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1802 error:
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1803 for (i = 0; i < ARRAY_SIZE(xdev->chan); i++)
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1804 xilinx_dpdma_chan_remove(xdev->chan[i]);
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1805
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1806 return ret;
7cbb0c63de3fc2 Hyun Kwon 2020-07-17 1807 }
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
_______________________________________________
kbuild mailing list -- kbuild@lists.01.org
To unsubscribe send an email to kbuild-leave@lists.01.org
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels
2021-04-29 6:58 [PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels quanyang.wang
2021-04-29 13:03 ` [kbuild] " Dan Carpenter
@ 2021-04-30 0:36 ` Laurent Pinchart
2021-04-30 1:45 ` quanyang.wang
1 sibling, 1 reply; 5+ messages in thread
From: Laurent Pinchart @ 2021-04-30 0:36 UTC (permalink / raw)
To: quanyang.wang
Cc: Vinod Koul, Hyun Kwon, Michal Simek, Tejas Upadhyay, dmaengine,
linux-arm-kernel, linux-kernel
Hi Quanyang,
Thank you for the patch.
On Thu, Apr 29, 2021 at 02:58:21PM +0800, quanyang.wang@windriver.com wrote:
> From: Quanyang Wang <quanyang.wang@windriver.com>
>
> In some scenarios (kdump), dpdma hardware irqs has been enabled when
> calling request_irq in probe function, and then the dpdma irq handler
> xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
> this moment xdev->chan[i] hasn't been initialized. So let's call the
> request_irq after initializing dma channels to avoid kdump kernel
> crash as below:
>
> [ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
> [ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
> [ 3.704900] Mem abort info:
> [ 3.704902] ESR = 0x96000005
> [ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 3.704907] SET = 0, FnV = 0
> [ 3.704912] EA = 0, S1PTW = 0
> [ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
> [ 3.715585] Data abort info:
> [ 3.715587] ISV = 0, ISS = 0x00000005
> [ 3.715589] CM = 0, WnR = 0
> [ 3.715592] [000000000000012c] user address but active_mm is swapper
> [ 3.715596] Internal error: Oops: 96000005 [#1] SMP
> [ 3.715599] Modules linked in:
> [ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
> [ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
> [ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
> [ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
> [ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
> [ 3.798089] sp : ffffffc01186bdf0
> [ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
> [ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
> [ 3.811996] x25: 0000000008000408 x24: 0000000000000003
> [ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
> [ 3.822604] x21: 0000000000000000 x20: 0000000008000408
> [ 3.827908] x19: 0000000000000000 x18: 0000000000000010
> [ 3.833212] x17: 0000000000000000 x16: 0000000000000000
> [ 3.838516] x15: 0000000000000000 x14: ffffffc011291740
> [ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
> [ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
> [ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
> [ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
> [ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000
> [ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000
> [ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c
> [ 3.880948] Call trace:
> [ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560
> [ 3.888079] __handle_irq_event_percpu+0x5c/0x178
> [ 3.892774] handle_irq_event_percpu+0x34/0x98
> [ 3.897210] handle_irq_event+0x44/0xb8
> [ 3.901030] handle_fasteoi_irq+0xd0/0x190
> [ 3.905117] generic_handle_irq+0x30/0x48
> [ 3.909111] __handle_domain_irq+0x64/0xc0
> [ 3.913192] gic_handle_irq+0x78/0xa0
> [ 3.916846] el1_irq+0xc4/0x180
> [ 3.919982] cpuidle_enter_state+0x134/0x2f8
> [ 3.924243] cpuidle_enter+0x38/0x50
> [ 3.927810] call_cpuidle+0x1c/0x40
> [ 3.931290] do_idle+0x20c/0x270
> [ 3.934502] cpu_startup_entry+0x28/0x58
> [ 3.938410] rest_init+0xbc/0xcc
> [ 3.941631] arch_call_rest_init+0x10/0x1c
> [ 3.945718] start_kernel+0x51c/0x558
>
> Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
> Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
> ---
> drivers/dma/xilinx/xilinx_dpdma.c | 30 +++++++++++++++---------------
> 1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
> index 70b29bd079c9..0b599402c53f 100644
> --- a/drivers/dma/xilinx/xilinx_dpdma.c
> +++ b/drivers/dma/xilinx/xilinx_dpdma.c
> @@ -1622,19 +1622,6 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
> if (IS_ERR(xdev->reg))
> return PTR_ERR(xdev->reg);
>
> - xdev->irq = platform_get_irq(pdev, 0);
> - if (xdev->irq < 0) {
> - dev_err(xdev->dev, "failed to get platform irq\n");
> - return xdev->irq;
> - }
> -
> - ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
> - dev_name(xdev->dev), xdev);
> - if (ret) {
> - dev_err(xdev->dev, "failed to request IRQ\n");
> - return ret;
> - }
> -
> ddev = &xdev->common;
> ddev->dev = &pdev->dev;
>
> @@ -1688,6 +1675,19 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
> goto error_of_dma;
> }
>
> + xdev->irq = platform_get_irq(pdev, 0);
> + if (xdev->irq < 0) {
> + dev_err(xdev->dev, "failed to get platform irq\n");
As reported by the kbuild bot, ret isn't initialized here.
> + goto error_irq;
> + }
This part could stay where it was, just after
devm_platform_ioremap_resource().
> +
> + ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
> + dev_name(xdev->dev), xdev);
> + if (ret) {
> + dev_err(xdev->dev, "failed to request IRQ\n");
> + goto error_irq;
> + }
Ideally we should reset the device before requesting the IRQ, to ensure
we start in a consistent state. There doesn't seem to be any global
reset unfortunately. Shouldn't we at least disable interrupts ? It may
be a bit pointless though as we reenable them right below, so I suppose
this would be OK.
> +
> xilinx_dpdma_enable_irq(xdev);
>
> xilinx_dpdma_debugfs_init(xdev);
> @@ -1696,6 +1696,8 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
>
> return 0;
>
> +error_irq:
> + of_dma_controller_free(pdev->dev.of_node);
Why not free_irq() ? This change isn't described in the commit message.
> error_of_dma:
> dma_async_device_unregister(ddev);
> error_dma_async:
> @@ -1704,8 +1706,6 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
> for (i = 0; i < ARRAY_SIZE(xdev->chan); i++)
> xilinx_dpdma_chan_remove(xdev->chan[i]);
>
> - free_irq(xdev->irq, xdev);
> -
> return ret;
> }
>
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels
2021-04-30 0:36 ` Laurent Pinchart
@ 2021-04-30 1:45 ` quanyang.wang
[not found] ` <e8a245ac-e326-0e10-728b-b0ded7c03a71@xilinx.com>
0 siblings, 1 reply; 5+ messages in thread
From: quanyang.wang @ 2021-04-30 1:45 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Vinod Koul, Hyun Kwon, Michal Simek, Tejas Upadhyay, dmaengine,
linux-arm-kernel, linux-kernel
Hi Laurent,
On 4/30/21 8:36 AM, Laurent Pinchart wrote:
> Hi Quanyang,
>
> Thank you for the patch.
>
> On Thu, Apr 29, 2021 at 02:58:21PM +0800, quanyang.wang@windriver.com wrote:
>> From: Quanyang Wang <quanyang.wang@windriver.com>
>>
>> In some scenarios (kdump), dpdma hardware irqs has been enabled when
>> calling request_irq in probe function, and then the dpdma irq handler
>> xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
>> this moment xdev->chan[i] hasn't been initialized. So let's call the
>> request_irq after initializing dma channels to avoid kdump kernel
>> crash as below:
>>
>> [ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
>> [ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
>> [ 3.704900] Mem abort info:
>> [ 3.704902] ESR = 0x96000005
>> [ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits
>> [ 3.704907] SET = 0, FnV = 0
>> [ 3.704912] EA = 0, S1PTW = 0
>> [ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
>> [ 3.715585] Data abort info:
>> [ 3.715587] ISV = 0, ISS = 0x00000005
>> [ 3.715589] CM = 0, WnR = 0
>> [ 3.715592] [000000000000012c] user address but active_mm is swapper
>> [ 3.715596] Internal error: Oops: 96000005 [#1] SMP
>> [ 3.715599] Modules linked in:
>> [ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
>> [ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
>> [ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
>> [ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
>> [ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
>> [ 3.798089] sp : ffffffc01186bdf0
>> [ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
>> [ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
>> [ 3.811996] x25: 0000000008000408 x24: 0000000000000003
>> [ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
>> [ 3.822604] x21: 0000000000000000 x20: 0000000008000408
>> [ 3.827908] x19: 0000000000000000 x18: 0000000000000010
>> [ 3.833212] x17: 0000000000000000 x16: 0000000000000000
>> [ 3.838516] x15: 0000000000000000 x14: ffffffc011291740
>> [ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
>> [ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
>> [ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
>> [ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
>> [ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000
>> [ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000
>> [ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c
>> [ 3.880948] Call trace:
>> [ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560
>> [ 3.888079] __handle_irq_event_percpu+0x5c/0x178
>> [ 3.892774] handle_irq_event_percpu+0x34/0x98
>> [ 3.897210] handle_irq_event+0x44/0xb8
>> [ 3.901030] handle_fasteoi_irq+0xd0/0x190
>> [ 3.905117] generic_handle_irq+0x30/0x48
>> [ 3.909111] __handle_domain_irq+0x64/0xc0
>> [ 3.913192] gic_handle_irq+0x78/0xa0
>> [ 3.916846] el1_irq+0xc4/0x180
>> [ 3.919982] cpuidle_enter_state+0x134/0x2f8
>> [ 3.924243] cpuidle_enter+0x38/0x50
>> [ 3.927810] call_cpuidle+0x1c/0x40
>> [ 3.931290] do_idle+0x20c/0x270
>> [ 3.934502] cpu_startup_entry+0x28/0x58
>> [ 3.938410] rest_init+0xbc/0xcc
>> [ 3.941631] arch_call_rest_init+0x10/0x1c
>> [ 3.945718] start_kernel+0x51c/0x558
>>
>> Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
>> Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
>> ---
>> drivers/dma/xilinx/xilinx_dpdma.c | 30 +++++++++++++++---------------
>> 1 file changed, 15 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
>> index 70b29bd079c9..0b599402c53f 100644
>> --- a/drivers/dma/xilinx/xilinx_dpdma.c
>> +++ b/drivers/dma/xilinx/xilinx_dpdma.c
>> @@ -1622,19 +1622,6 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
>> if (IS_ERR(xdev->reg))
>> return PTR_ERR(xdev->reg);
>>
>> - xdev->irq = platform_get_irq(pdev, 0);
>> - if (xdev->irq < 0) {
>> - dev_err(xdev->dev, "failed to get platform irq\n");
>> - return xdev->irq;
>> - }
>> -
>> - ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
>> - dev_name(xdev->dev), xdev);
>> - if (ret) {
>> - dev_err(xdev->dev, "failed to request IRQ\n");
>> - return ret;
>> - }
>> -
>> ddev = &xdev->common;
>> ddev->dev = &pdev->dev;
>>
>> @@ -1688,6 +1675,19 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
>> goto error_of_dma;
>> }
>>
>> + xdev->irq = platform_get_irq(pdev, 0);
>> + if (xdev->irq < 0) {
>> + dev_err(xdev->dev, "failed to get platform irq\n");
> As reported by the kbuild bot, ret isn't initialized here.
I will fix this in V2.
>
>> + goto error_irq;
>> + }
> This part could stay where it was, just after
> devm_platform_ioremap_resource().
OK,I will move it back.
>
>> +
>> + ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
>> + dev_name(xdev->dev), xdev);
>> + if (ret) {
>> + dev_err(xdev->dev, "failed to request IRQ\n");
>> + goto error_irq;
>> + }
> Ideally we should reset the device before requesting the IRQ, to ensure
> we start in a consistent state. There doesn't seem to be any global
> reset unfortunately. Shouldn't we at least disable interrupts ? It may
> be a bit pointless though as we reenable them right below, so I suppose
> this would be OK.
Yes, we should start in a consistent and clean state. I will disable
interrupts
and clean up registers state in V2.
>
>> +
>> xilinx_dpdma_enable_irq(xdev);
>>
>> xilinx_dpdma_debugfs_init(xdev);
>> @@ -1696,6 +1696,8 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
>>
>> return 0;
>>
>> +error_irq:
>> + of_dma_controller_free(pdev->dev.of_node);
> Why not free_irq() ? This change isn't described in the commit message.
I will add it in V2.
Thanks,
Quanyang
>
>> error_of_dma:
>> dma_async_device_unregister(ddev);
>> error_dma_async:
>> @@ -1704,8 +1706,6 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
>> for (i = 0; i < ARRAY_SIZE(xdev->chan); i++)
>> xilinx_dpdma_chan_remove(xdev->chan[i]);
>>
>> - free_irq(xdev->irq, xdev);
>> -
>> return ret;
>> }
>>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels
[not found] ` <e8a245ac-e326-0e10-728b-b0ded7c03a71@xilinx.com>
@ 2021-04-30 6:56 ` quanyang.wang
0 siblings, 0 replies; 5+ messages in thread
From: quanyang.wang @ 2021-04-30 6:56 UTC (permalink / raw)
To: Michal Simek, Laurent Pinchart
Cc: Vinod Koul, Hyun Kwon, Tejas Upadhyay, dmaengine,
linux-arm-kernel, linux-kernel
Hi Michal,
On 4/30/21 2:51 PM, Michal Simek wrote:
> Hi,
>
> On 4/30/21 3:45 AM, quanyang.wang wrote:
>> Hi Laurent,
>>
>> On 4/30/21 8:36 AM, Laurent Pinchart wrote:
>>> Hi Quanyang,
>>>
>>> Thank you for the patch.
>>>
>>> On Thu, Apr 29, 2021 at 02:58:21PM +0800, quanyang.wang@windriver.com
>>> wrote:
>>>> From: Quanyang Wang <quanyang.wang@windriver.com>
>>>>
>>>> In some scenarios (kdump), dpdma hardware irqs has been enabled when
>>>> calling request_irq in probe function, and then the dpdma irq handler
>>>> xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
>>>> this moment xdev->chan[i] hasn't been initialized. So let's call the
>>>> request_irq after initializing dma channels to avoid kdump kernel
>>>> crash as below:
>>>>
>>>> [ 3.696128] Unable to handle kernel NULL pointer dereference at
>>>> virtual address 000000000000012c
>>>> [ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx
>>>> DPDMA engine is probed
>>>> [ 3.704900] Mem abort info:
>>>> [ 3.704902] ESR = 0x96000005
>>>> [ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits
>>>> [ 3.704907] SET = 0, FnV = 0
>>>> [ 3.704912] EA = 0, S1PTW = 0
>>>> [ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using
>>>> dummy regulator
>>>> [ 3.715585] Data abort info:
>>>> [ 3.715587] ISV = 0, ISS = 0x00000005
>>>> [ 3.715589] CM = 0, WnR = 0
>>>> [ 3.715592] [000000000000012c] user address but active_mm is swapper
>>>> [ 3.715596] Internal error: Oops: 96000005 [#1] SMP
>>>> [ 3.715599] Modules linked in:
>>>> [ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
>>>> 5.10.0-12170-g60894882155f-dirty #77
>>>> [ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
>>>> [ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
>>>> [ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
>>>> [ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
>>>> [ 3.798089] sp : ffffffc01186bdf0
>>>> [ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
>>>> [ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
>>>> [ 3.811996] x25: 0000000008000408 x24: 0000000000000003
>>>> [ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
>>>> [ 3.822604] x21: 0000000000000000 x20: 0000000008000408
>>>> [ 3.827908] x19: 0000000000000000 x18: 0000000000000010
>>>> [ 3.833212] x17: 0000000000000000 x16: 0000000000000000
>>>> [ 3.838516] x15: 0000000000000000 x14: ffffffc011291740
>>>> [ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
>>>> [ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
>>>> [ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
>>>> [ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
>>>> [ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000
>>>> [ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000
>>>> [ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c
>>>> [ 3.880948] Call trace:
>>>> [ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560
>>>> [ 3.888079] __handle_irq_event_percpu+0x5c/0x178
>>>> [ 3.892774] handle_irq_event_percpu+0x34/0x98
>>>> [ 3.897210] handle_irq_event+0x44/0xb8
>>>> [ 3.901030] handle_fasteoi_irq+0xd0/0x190
>>>> [ 3.905117] generic_handle_irq+0x30/0x48
>>>> [ 3.909111] __handle_domain_irq+0x64/0xc0
>>>> [ 3.913192] gic_handle_irq+0x78/0xa0
>>>> [ 3.916846] el1_irq+0xc4/0x180
>>>> [ 3.919982] cpuidle_enter_state+0x134/0x2f8
>>>> [ 3.924243] cpuidle_enter+0x38/0x50
>>>> [ 3.927810] call_cpuidle+0x1c/0x40
>>>> [ 3.931290] do_idle+0x20c/0x270
>>>> [ 3.934502] cpu_startup_entry+0x28/0x58
>>>> [ 3.938410] rest_init+0xbc/0xcc
>>>> [ 3.941631] arch_call_rest_init+0x10/0x1c
>>>> [ 3.945718] start_kernel+0x51c/0x558
>>>>
>>>> Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx
>>>> DisplayPort DMA engine driver")
>>>> Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
>>>> ---
>>>> drivers/dma/xilinx/xilinx_dpdma.c | 30 +++++++++++++++---------------
>>>> 1 file changed, 15 insertions(+), 15 deletions(-)
>>>>
>>>> diff --git a/drivers/dma/xilinx/xilinx_dpdma.c
>>>> b/drivers/dma/xilinx/xilinx_dpdma.c
>>>> index 70b29bd079c9..0b599402c53f 100644
>>>> --- a/drivers/dma/xilinx/xilinx_dpdma.c
>>>> +++ b/drivers/dma/xilinx/xilinx_dpdma.c
>>>> @@ -1622,19 +1622,6 @@ static int xilinx_dpdma_probe(struct
>>>> platform_device *pdev)
>>>> if (IS_ERR(xdev->reg))
>>>> return PTR_ERR(xdev->reg);
>>>> - xdev->irq = platform_get_irq(pdev, 0);
>>>> - if (xdev->irq < 0) {
>>>> - dev_err(xdev->dev, "failed to get platform irq\n");
>>>> - return xdev->irq;
>>>> - }
>>>> -
>>>> - ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
>>>> - dev_name(xdev->dev), xdev);
>>>> - if (ret) {
>>>> - dev_err(xdev->dev, "failed to request IRQ\n");
>>>> - return ret;
>>>> - }
>>>> -
>>>> ddev = &xdev->common;
>>>> ddev->dev = &pdev->dev;
>>>> @@ -1688,6 +1675,19 @@ static int xilinx_dpdma_probe(struct
>>>> platform_device *pdev)
>>>> goto error_of_dma;
>>>> }
>>>> + xdev->irq = platform_get_irq(pdev, 0);
>>>> + if (xdev->irq < 0) {
>>>> + dev_err(xdev->dev, "failed to get platform irq\n");
>>> As reported by the kbuild bot, ret isn't initialized here.
>> I will fix this in V2.
>>>> + goto error_irq;
>>>> + }
>>> This part could stay where it was, just after
>>> devm_platform_ioremap_resource().
>> OK,I will move it back.
>>>> +
>>>> + ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
>>>> + dev_name(xdev->dev), xdev);
>>>> + if (ret) {
>>>> + dev_err(xdev->dev, "failed to request IRQ\n");
>>>> + goto error_irq;
>>>> + }
>>> Ideally we should reset the device before requesting the IRQ, to ensure
>>> we start in a consistent state. There doesn't seem to be any global
>>> reset unfortunately. Shouldn't we at least disable interrupts ? It may
>>> be a bit pointless though as we reenable them right below, so I suppose
>>> this would be OK.
>> Yes, we should start in a consistent and clean state. I will disable
>> interrupts
>>
>> and clean up registers state in V2.
>>
>>>> +
>>>> xilinx_dpdma_enable_irq(xdev);
>>>> xilinx_dpdma_debugfs_init(xdev);
>>>> @@ -1696,6 +1696,8 @@ static int xilinx_dpdma_probe(struct
>>>> platform_device *pdev)
>>>> return 0;
>>>> +error_irq:
>>>> + of_dma_controller_free(pdev->dev.of_node);
>>> Why not free_irq() ? This change isn't described in the commit message.
>> I will add it in V2.
> When I was checking it that request_irq was called last. It means it
> wasn't necessary to free irq in error path. But double check it.
Thank you very much for your reminder.
Yes, free_irq is not necessary, and I have abandoned all modifications
of V1 and
make a new V2 patch.
Thanks,
Quanyang
>
> M
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-04-30 6:58 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-29 6:58 [PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels quanyang.wang
2021-04-29 13:03 ` [kbuild] " Dan Carpenter
2021-04-30 0:36 ` Laurent Pinchart
2021-04-30 1:45 ` quanyang.wang
[not found] ` <e8a245ac-e326-0e10-728b-b0ded7c03a71@xilinx.com>
2021-04-30 6:56 ` quanyang.wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).