i.MX8MM SPI DMA not working

i.MX8MM SPI DMA not working

[Fabio Estevam]

Hi Robin,

I am seeing SPI DMA failure on i.MX8MM running kernel 5.13.0-rc5:

[   41.315984] spi_master spi1: I/O Error in DMA RX
[   41.320660] mcp251xfd spi1.0: SPI transfer failed: -110
[   41.325947] spi_master spi1: failed to transfer one message from queue
[   41.332532] mcp251xfd spi1.0 can0: IRQ handler
mcp251xfd_handle_rxif() returned -110.
[   41.340432] mcp251xfd spi1.0 can0: IRQ handler returned -110
(intf=0x3f1a0012).
[   41.347990] spi_master spi2: I/O Error in DMA RX

There is an old series from you that aimed to fix i.MX8MM SPI DMA:
https://patchwork.kernel.org/project/spi-devel-general/patch/1593523876-22387-6-git-send-email-yibin.gong@nxp.com/

Do you have an updated tree with these patches applied so I can test
them with a recent kernel?

Besides the imx-sdma and imx-spi fixes, do we need an updated
sdma-imx7d.bin for SPI DMA to work on i.MX8MM?  I am using the one
from the linux-firmware tree:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/log/imx/sdma/sdma-imx7d.bin

Would it work if a use the ROM firmware or would you recommend using
the external firmware?

Please advise.

Thanks,

Fabio Estevam

Re: i.MX8MM SPI DMA not working

[Fabio Estevam]

Hi Robin,

On Fri, Jun 11, 2021 at 9:44 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Robin,
>
> I am seeing SPI DMA failure on i.MX8MM running kernel 5.13.0-rc5:
>
> [   41.315984] spi_master spi1: I/O Error in DMA RX

I found your latest series at:
https://patches.linaro.org/cover/417924/

I applied it and no longer see the DMA RX error.

Thanks!