[PATCH v8 0/7] Remove VT-d virtual command interface and IOASID

[PATCH v8 0/7] Remove VT-d virtual command interface and IOASID

[Jacob Pan]

Hi all,

This patch set removes unused VT-d virtual command interface followed by
removal of the IOASID infrastructure.

This has only been tested on x86 platforms, need help with testing on ARM
SMMU and other architectures.


Thanks,

Jacob

ChangeLog:
v8:
 - remove #ifdef CONFIG_IOMMU_SVA since we have dummy inline functions.
 - fixed a compile bug that affects bisectability

v7:
 - use CONFIG_IOMMU_SVA around PASID helpers in fork.c, Fixes a
   compile problem.
 - Fix extra space

v6:
 - put pasid helpers under iommu.h instead of iommu-helper.h
 - add comments for pasid allocation function to clarify inclusive range

v5:
 - rebased on v6.3-rc1
 - put removing iommu_sva_find() in a separate patch (Kevin)
 - move definition of helpers to iommu code to be consistent with
   declarations. (Kevin)
 - misc fixes

v4:
 - keep mm_pasid helpers inline as much as we can for fork performance
 - separate GFP_ATOMIC to GFP_KERNEL change for bisectability

v3:
 - moved helper functions for PASID under SVA code, avoided circular inclusion
   between mm.h and iommu.h
 - deleted makefiles
 - put rename under a different patch



Jacob Pan (5):
  iommu/vt-d: Remove virtual command interface
  iommu/sva: Move PASID helpers to sva code
  iommu/sva: Remove PASID to mm lookup function
  iommu/sva: Use GFP_KERNEL for pasid allocation
  iommu/ioasid: Rename INVALID_IOASID

Jason Gunthorpe (2):
  iommu/sva: Stop using ioasid_set for SVA
  iommu: Remove ioasid infrastructure

 Documentation/x86/sva.rst       |   2 +-
 arch/x86/kernel/traps.c         |   2 +-
 drivers/dma/idxd/device.c       |   8 +-
 drivers/dma/idxd/idxd.h         |   2 +-
 drivers/dma/idxd/init.c         |   2 +-
 drivers/dma/idxd/irq.c          |   2 +-
 drivers/iommu/Kconfig           |   5 -
 drivers/iommu/Makefile          |   1 -
 drivers/iommu/intel/cap_audit.c |   2 -
 drivers/iommu/intel/dmar.c      |   6 +-
 drivers/iommu/intel/iommu.c     |  87 +------
 drivers/iommu/intel/iommu.h     |   3 -
 drivers/iommu/intel/svm.c       |   3 +-
 drivers/iommu/ioasid.c          | 422 --------------------------------
 drivers/iommu/iommu-sva.c       |  61 ++---
 drivers/iommu/iommu-sva.h       |   4 -
 include/linux/ioasid.h          |  83 -------
 include/linux/iommu.h           |  14 +-
 include/linux/sched/mm.h        |  26 --
 kernel/fork.c                   |   1 +
 mm/init-mm.c                    |   4 +-
 21 files changed, 47 insertions(+), 693 deletions(-)
 delete mode 100644 drivers/iommu/ioasid.c
 delete mode 100644 include/linux/ioasid.h

-- 
2.25.1

[PATCH v8 1/7] iommu/vt-d: Remove virtual command interface

[Jacob Pan]

Virtual command interface was introduced to allow using host PASIDs
inside VMs. It is unused and abandoned due to architectural change.

With this patch, we can safely remove this feature and the related helpers.

Link: https://lore.kernel.org/r/20230210230206.3160144-2-jacob.jun.pan@linux.intel.com
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel/cap_audit.c |  2 -
 drivers/iommu/intel/dmar.c      |  2 -
 drivers/iommu/intel/iommu.c     | 85 ---------------------------------
 drivers/iommu/intel/iommu.h     |  2 -
 4 files changed, 91 deletions(-)

diff --git a/drivers/iommu/intel/cap_audit.c b/drivers/iommu/intel/cap_audit.c
index 806986696841..9862dc20b35e 100644
--- a/drivers/iommu/intel/cap_audit.c
+++ b/drivers/iommu/intel/cap_audit.c
@@ -54,7 +54,6 @@ static inline void check_dmar_capabilities(struct intel_iommu *a,
 	CHECK_FEATURE_MISMATCH(a, b, ecap, slts, ECAP_SLTS_MASK);
 	CHECK_FEATURE_MISMATCH(a, b, ecap, nwfs, ECAP_NWFS_MASK);
 	CHECK_FEATURE_MISMATCH(a, b, ecap, slads, ECAP_SLADS_MASK);
-	CHECK_FEATURE_MISMATCH(a, b, ecap, vcs, ECAP_VCS_MASK);
 	CHECK_FEATURE_MISMATCH(a, b, ecap, smts, ECAP_SMTS_MASK);
 	CHECK_FEATURE_MISMATCH(a, b, ecap, pds, ECAP_PDS_MASK);
 	CHECK_FEATURE_MISMATCH(a, b, ecap, dit, ECAP_DIT_MASK);
@@ -101,7 +100,6 @@ static int cap_audit_hotplug(struct intel_iommu *iommu, enum cap_audit_type type
 	CHECK_FEATURE_MISMATCH_HOTPLUG(iommu, ecap, slts, ECAP_SLTS_MASK);
 	CHECK_FEATURE_MISMATCH_HOTPLUG(iommu, ecap, nwfs, ECAP_NWFS_MASK);
 	CHECK_FEATURE_MISMATCH_HOTPLUG(iommu, ecap, slads, ECAP_SLADS_MASK);
-	CHECK_FEATURE_MISMATCH_HOTPLUG(iommu, ecap, vcs, ECAP_VCS_MASK);
 	CHECK_FEATURE_MISMATCH_HOTPLUG(iommu, ecap, smts, ECAP_SMTS_MASK);
 	CHECK_FEATURE_MISMATCH_HOTPLUG(iommu, ecap, pds, ECAP_PDS_MASK);
 	CHECK_FEATURE_MISMATCH_HOTPLUG(iommu, ecap, dit, ECAP_DIT_MASK);
diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 6acfe879589c..0f348439ef0e 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -993,8 +993,6 @@ static int map_iommu(struct intel_iommu *iommu, struct dmar_drhd_unit *drhd)
 		warn_invalid_dmar(phys_addr, " returns all ones");
 		goto unmap;
 	}
-	if (ecap_vcs(iommu->ecap))
-		iommu->vccap = dmar_readq(iommu->reg + DMAR_VCCAP_REG);
 
 	/* the registers might be more than one page */
 	map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 7c2f4bd33582..21c14e00c852 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1722,9 +1722,6 @@ static void free_dmar_iommu(struct intel_iommu *iommu)
 		if (ecap_prs(iommu->ecap))
 			intel_svm_finish_prq(iommu);
 	}
-	if (vccap_pasid(iommu->vccap))
-		ioasid_unregister_allocator(&iommu->pasid_allocator);
-
 #endif
 }
 
@@ -2797,85 +2794,6 @@ static int copy_translation_tables(struct intel_iommu *iommu)
 	return ret;
 }
 
-#ifdef CONFIG_INTEL_IOMMU_SVM
-static ioasid_t intel_vcmd_ioasid_alloc(ioasid_t min, ioasid_t max, void *data)
-{
-	struct intel_iommu *iommu = data;
-	ioasid_t ioasid;
-
-	if (!iommu)
-		return INVALID_IOASID;
-	/*
-	 * VT-d virtual command interface always uses the full 20 bit
-	 * PASID range. Host can partition guest PASID range based on
-	 * policies but it is out of guest's control.
-	 */
-	if (min < PASID_MIN || max > intel_pasid_max_id)
-		return INVALID_IOASID;
-
-	if (vcmd_alloc_pasid(iommu, &ioasid))
-		return INVALID_IOASID;
-
-	return ioasid;
-}
-
-static void intel_vcmd_ioasid_free(ioasid_t ioasid, void *data)
-{
-	struct intel_iommu *iommu = data;
-
-	if (!iommu)
-		return;
-	/*
-	 * Sanity check the ioasid owner is done at upper layer, e.g. VFIO
-	 * We can only free the PASID when all the devices are unbound.
-	 */
-	if (ioasid_find(NULL, ioasid, NULL)) {
-		pr_alert("Cannot free active IOASID %d\n", ioasid);
-		return;
-	}
-	vcmd_free_pasid(iommu, ioasid);
-}
-
-static void register_pasid_allocator(struct intel_iommu *iommu)
-{
-	/*
-	 * If we are running in the host, no need for custom allocator
-	 * in that PASIDs are allocated from the host system-wide.
-	 */
-	if (!cap_caching_mode(iommu->cap))
-		return;
-
-	if (!sm_supported(iommu)) {
-		pr_warn("VT-d Scalable Mode not enabled, no PASID allocation\n");
-		return;
-	}
-
-	/*
-	 * Register a custom PASID allocator if we are running in a guest,
-	 * guest PASID must be obtained via virtual command interface.
-	 * There can be multiple vIOMMUs in each guest but only one allocator
-	 * is active. All vIOMMU allocators will eventually be calling the same
-	 * host allocator.
-	 */
-	if (!vccap_pasid(iommu->vccap))
-		return;
-
-	pr_info("Register custom PASID allocator\n");
-	iommu->pasid_allocator.alloc = intel_vcmd_ioasid_alloc;
-	iommu->pasid_allocator.free = intel_vcmd_ioasid_free;
-	iommu->pasid_allocator.pdata = (void *)iommu;
-	if (ioasid_register_allocator(&iommu->pasid_allocator)) {
-		pr_warn("Custom PASID allocator failed, scalable mode disabled\n");
-		/*
-		 * Disable scalable mode on this IOMMU if there
-		 * is no custom allocator. Mixing SM capable vIOMMU
-		 * and non-SM vIOMMU are not supported.
-		 */
-		intel_iommu_sm = 0;
-	}
-}
-#endif
-
 static int __init init_dmars(void)
 {
 	struct dmar_drhd_unit *drhd;
@@ -2964,9 +2882,6 @@ static int __init init_dmars(void)
 	 */
 	for_each_active_iommu(iommu, drhd) {
 		iommu_flush_write_buffer(iommu);
-#ifdef CONFIG_INTEL_IOMMU_SVM
-		register_pasid_allocator(iommu);
-#endif
 		iommu_set_root_entry(iommu);
 	}
 
diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h
index d6df3b865812..a2010fb120e2 100644
--- a/drivers/iommu/intel/iommu.h
+++ b/drivers/iommu/intel/iommu.h
@@ -198,7 +198,6 @@
 #define ecap_flts(e)		(((e) >> 47) & 0x1)
 #define ecap_slts(e)		(((e) >> 46) & 0x1)
 #define ecap_slads(e)		(((e) >> 45) & 0x1)
-#define ecap_vcs(e)		(((e) >> 44) & 0x1)
 #define ecap_smts(e)		(((e) >> 43) & 0x1)
 #define ecap_dit(e)		(((e) >> 41) & 0x1)
 #define ecap_pds(e)		(((e) >> 42) & 0x1)
@@ -676,7 +675,6 @@ struct intel_iommu {
 	unsigned char prq_name[16];    /* Name for PRQ interrupt */
 	unsigned long prq_seq_number;
 	struct completion prq_complete;
-	struct ioasid_allocator_ops pasid_allocator; /* Custom allocator for PASIDs */
 #endif
 	struct iopf_queue *iopf_queue;
 	unsigned char iopfq_name[16];
-- 
2.25.1

[PATCH v8 2/7] iommu/sva: Move PASID helpers to sva code

[Jacob Pan]

Preparing to remove IOASID infrastructure, PASID management will be
under SVA code. Decouple mm code from IOASID.

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
v8:
	-remove dummy inline pasid_valid() and #ifdef CONFIG_IOMMU_SVA
v7:
	- use CONFIG_IOMMU_SVA around PASID helpers in fork.c, Fixes a
	compile problem.
v6:
	- put helpers under iommu.h instead of iommu-helper.h
v5:
	- move definition of helpers to iommu code to be consistent with
	  declarations. (Kevin)
	- fix patch partitioning bug (Baolu)
v4:
	- delete and open code mm_set_pasid
	- keep mm_init_pasid() as inline for fork performance
---
 drivers/iommu/iommu-sva.c | 10 +++++++++-
 include/linux/ioasid.h    | 11 +----------
 include/linux/iommu.h     | 14 +++++++++++++-
 include/linux/sched/mm.h  | 26 --------------------------
 kernel/fork.c             |  1 +
 5 files changed, 24 insertions(+), 38 deletions(-)

diff --git a/drivers/iommu/iommu-sva.c b/drivers/iommu/iommu-sva.c
index 24bf9b2b58aa..fcfdc80a3939 100644
--- a/drivers/iommu/iommu-sva.c
+++ b/drivers/iommu/iommu-sva.c
@@ -44,7 +44,7 @@ int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max)
 	if (!pasid_valid(pasid))
 		ret = -ENOMEM;
 	else
-		mm_pasid_set(mm, pasid);
+		mm->pasid = pasid;
 out:
 	mutex_unlock(&iommu_sva_lock);
 	return ret;
@@ -238,3 +238,11 @@ iommu_sva_handle_iopf(struct iommu_fault *fault, void *data)
 
 	return status;
 }
+
+void mm_pasid_drop(struct mm_struct *mm)
+{
+	if (pasid_valid(mm->pasid)) {
+		ioasid_free(mm->pasid);
+		mm->pasid = INVALID_IOASID;
+	}
+}
diff --git a/include/linux/ioasid.h b/include/linux/ioasid.h
index af1c9d62e642..734bf0e036ee 100644
--- a/include/linux/ioasid.h
+++ b/include/linux/ioasid.h
@@ -4,8 +4,8 @@
 
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/iommu.h>
 
-#define INVALID_IOASID ((ioasid_t)-1)
 typedef unsigned int ioasid_t;
 typedef ioasid_t (*ioasid_alloc_fn_t)(ioasid_t min, ioasid_t max, void *data);
 typedef void (*ioasid_free_fn_t)(ioasid_t ioasid, void *data);
@@ -40,10 +40,6 @@ void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid,
 int ioasid_register_allocator(struct ioasid_allocator_ops *allocator);
 void ioasid_unregister_allocator(struct ioasid_allocator_ops *allocator);
 int ioasid_set_data(ioasid_t ioasid, void *data);
-static inline bool pasid_valid(ioasid_t ioasid)
-{
-	return ioasid != INVALID_IOASID;
-}
 
 #else /* !CONFIG_IOASID */
 static inline ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min,
@@ -74,10 +70,5 @@ static inline int ioasid_set_data(ioasid_t ioasid, void *data)
 	return -ENOTSUPP;
 }
 
-static inline bool pasid_valid(ioasid_t ioasid)
-{
-	return false;
-}
-
 #endif /* CONFIG_IOASID */
 #endif /* __LINUX_IOASID_H */
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 6595454d4f48..d3f81dc6e4dd 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -13,7 +13,6 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/of.h>
-#include <linux/ioasid.h>
 #include <uapi/linux/iommu.h>
 
 #define IOMMU_READ	(1 << 0)
@@ -192,6 +191,8 @@ enum iommu_dev_features {
 };
 
 #define IOMMU_PASID_INVALID	(-1U)
+typedef unsigned int ioasid_t;
+#define INVALID_IOASID ((ioasid_t)-1)
 
 #ifdef CONFIG_IOMMU_API
 
@@ -1172,7 +1173,16 @@ static inline bool tegra_dev_iommu_get_stream_id(struct device *dev, u32 *stream
 	return false;
 }
 
+static inline bool pasid_valid(ioasid_t ioasid)
+{
+	return ioasid != INVALID_IOASID;
+}
 #ifdef CONFIG_IOMMU_SVA
+static inline void mm_pasid_init(struct mm_struct *mm)
+{
+	mm->pasid = INVALID_IOASID;
+}
+void mm_pasid_drop(struct mm_struct *mm);
 struct iommu_sva *iommu_sva_bind_device(struct device *dev,
 					struct mm_struct *mm);
 void iommu_sva_unbind_device(struct iommu_sva *handle);
@@ -1192,6 +1202,8 @@ static inline u32 iommu_sva_get_pasid(struct iommu_sva *handle)
 {
 	return IOMMU_PASID_INVALID;
 }
+static inline void mm_pasid_init(struct mm_struct *mm) {}
+static inline void mm_pasid_drop(struct mm_struct *mm) {}
 #endif /* CONFIG_IOMMU_SVA */
 
 #endif /* __LINUX_IOMMU_H */
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 2a243616f222..da9712a3ba73 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -8,7 +8,6 @@
 #include <linux/mm_types.h>
 #include <linux/gfp.h>
 #include <linux/sync_core.h>
-#include <linux/ioasid.h>
 
 /*
  * Routines for handling mm_structs
@@ -451,29 +450,4 @@ static inline void membarrier_update_current_mm(struct mm_struct *next_mm)
 }
 #endif
 
-#ifdef CONFIG_IOMMU_SVA
-static inline void mm_pasid_init(struct mm_struct *mm)
-{
-	mm->pasid = INVALID_IOASID;
-}
-
-/* Associate a PASID with an mm_struct: */
-static inline void mm_pasid_set(struct mm_struct *mm, u32 pasid)
-{
-	mm->pasid = pasid;
-}
-
-static inline void mm_pasid_drop(struct mm_struct *mm)
-{
-	if (pasid_valid(mm->pasid)) {
-		ioasid_free(mm->pasid);
-		mm->pasid = INVALID_IOASID;
-	}
-}
-#else
-static inline void mm_pasid_init(struct mm_struct *mm) {}
-static inline void mm_pasid_set(struct mm_struct *mm, u32 pasid) {}
-static inline void mm_pasid_drop(struct mm_struct *mm) {}
-#endif
-
 #endif /* _LINUX_SCHED_MM_H */
diff --git a/kernel/fork.c b/kernel/fork.c
index f68954d05e89..a0ea68a2bd19 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -97,6 +97,7 @@
 #include <linux/io_uring.h>
 #include <linux/bpf.h>
 #include <linux/stackprotector.h>
+#include <linux/iommu.h>
 
 #include <asm/pgalloc.h>
 #include <linux/uaccess.h>
-- 
2.25.1

RE: [PATCH v8 2/7] iommu/sva: Move PASID helpers to sva code

[Tian, Kevin]

> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Sent: Thursday, March 23, 2023 4:08 AM
> 
> Preparing to remove IOASID infrastructure, PASID management will be
> under SVA code. Decouple mm code from IOASID.
> 
> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>

Reviewed-by: Kevin Tian <kevin.tian@intel.com>

[PATCH v8 3/7] iommu/sva: Remove PASID to mm lookup function

[Jacob Pan]

There is no user of iommu_sva_find() function, remove it so that PASID
allocator can be a simple IDA. Device drivers are expected to store
and keep track of their own PASID metadata.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe<jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 drivers/iommu/iommu-sva.c | 20 --------------------
 drivers/iommu/iommu-sva.h |  1 -
 2 files changed, 21 deletions(-)

diff --git a/drivers/iommu/iommu-sva.c b/drivers/iommu/iommu-sva.c
index fcfdc80a3939..4f357ef14f04 100644
--- a/drivers/iommu/iommu-sva.c
+++ b/drivers/iommu/iommu-sva.c
@@ -51,26 +51,6 @@ int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max)
 }
 EXPORT_SYMBOL_GPL(iommu_sva_alloc_pasid);
 
-/* ioasid_find getter() requires a void * argument */
-static bool __mmget_not_zero(void *mm)
-{
-	return mmget_not_zero(mm);
-}
-
-/**
- * iommu_sva_find() - Find mm associated to the given PASID
- * @pasid: Process Address Space ID assigned to the mm
- *
- * On success a reference to the mm is taken, and must be released with mmput().
- *
- * Returns the mm corresponding to this PASID, or an error if not found.
- */
-struct mm_struct *iommu_sva_find(ioasid_t pasid)
-{
-	return ioasid_find(&iommu_sva_pasid, pasid, __mmget_not_zero);
-}
-EXPORT_SYMBOL_GPL(iommu_sva_find);
-
 /**
  * iommu_sva_bind_device() - Bind a process address space to a device
  * @dev: the device
diff --git a/drivers/iommu/iommu-sva.h b/drivers/iommu/iommu-sva.h
index 7215a761b962..102eae1817a2 100644
--- a/drivers/iommu/iommu-sva.h
+++ b/drivers/iommu/iommu-sva.h
@@ -9,7 +9,6 @@
 #include <linux/mm_types.h>
 
 int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max);
-struct mm_struct *iommu_sva_find(ioasid_t pasid);
 
 /* I/O Page fault */
 struct device;
-- 
2.25.1

RE: [PATCH v8 3/7] iommu/sva: Remove PASID to mm lookup function

[Tian, Kevin]

> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Sent: Thursday, March 23, 2023 4:08 AM
> 
> There is no user of iommu_sva_find() function, remove it so that PASID
> allocator can be a simple IDA. Device drivers are expected to store
> and keep track of their own PASID metadata.
> 
> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Jason Gunthorpe<jgg@nvidia.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>

Reviewed-by: Kevin Tian <kevin.tian@intel.com>

[PATCH v8 4/7] iommu/sva: Stop using ioasid_set for SVA

[Jacob Pan]

From: Jason Gunthorpe <jgg@nvidia.com>

Instead SVA drivers can use a simple global IDA to allocate PASIDs for
each mm_struct.

Future work would be to allow drivers using the SVA APIs to reserve global
PASIDs from this IDA for their internal use, eg with the DMA API PASID
support.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
v5:
	- Put removing iommu_sva_find() to a separate patch (Kevin)
	- Make pasid allocation range to be inclusive (Tina)
	- Simplified return code handling (Baolu)
v4:
	- Keep GFP_ATOMIC flag for PASID allocation, will changed to
	GFP_KERNEL in a separate patch.
---
 drivers/iommu/iommu-sva.c | 41 +++++++++++++--------------------------
 drivers/iommu/iommu-sva.h |  2 --
 2 files changed, 14 insertions(+), 29 deletions(-)

diff --git a/drivers/iommu/iommu-sva.c b/drivers/iommu/iommu-sva.c
index 4f357ef14f04..48e8a15ddc9b 100644
--- a/drivers/iommu/iommu-sva.c
+++ b/drivers/iommu/iommu-sva.c
@@ -9,47 +9,34 @@
 #include "iommu-sva.h"
 
 static DEFINE_MUTEX(iommu_sva_lock);
-static DECLARE_IOASID_SET(iommu_sva_pasid);
+static DEFINE_IDA(iommu_global_pasid_ida);
 
-/**
- * iommu_sva_alloc_pasid - Allocate a PASID for the mm
- * @mm: the mm
- * @min: minimum PASID value (inclusive)
- * @max: maximum PASID value (inclusive)
- *
- * Try to allocate a PASID for this mm, or take a reference to the existing one
- * provided it fits within the [@min, @max] range. On success the PASID is
- * available in mm->pasid and will be available for the lifetime of the mm.
- *
- * Returns 0 on success and < 0 on error.
- */
-int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max)
+/* Allocate a PASID for the mm within range (inclusive) */
+static int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max)
 {
 	int ret = 0;
-	ioasid_t pasid;
 
-	if (min == INVALID_IOASID || max == INVALID_IOASID ||
+	if (!pasid_valid(min) || !pasid_valid(max) ||
 	    min == 0 || max < min)
 		return -EINVAL;
 
 	mutex_lock(&iommu_sva_lock);
 	/* Is a PASID already associated with this mm? */
 	if (pasid_valid(mm->pasid)) {
-		if (mm->pasid < min || mm->pasid >= max)
+		if (mm->pasid < min || mm->pasid > max)
 			ret = -EOVERFLOW;
 		goto out;
 	}
 
-	pasid = ioasid_alloc(&iommu_sva_pasid, min, max, mm);
-	if (!pasid_valid(pasid))
-		ret = -ENOMEM;
-	else
-		mm->pasid = pasid;
+	ret = ida_alloc_range(&iommu_global_pasid_ida, min, max, GFP_ATOMIC);
+	if (ret < 0)
+		goto out;
+	mm->pasid = ret;
+	ret = 0;
 out:
 	mutex_unlock(&iommu_sva_lock);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(iommu_sva_alloc_pasid);
 
 /**
  * iommu_sva_bind_device() - Bind a process address space to a device
@@ -221,8 +208,8 @@ iommu_sva_handle_iopf(struct iommu_fault *fault, void *data)
 
 void mm_pasid_drop(struct mm_struct *mm)
 {
-	if (pasid_valid(mm->pasid)) {
-		ioasid_free(mm->pasid);
-		mm->pasid = INVALID_IOASID;
-	}
+	if (likely(!pasid_valid(mm->pasid)))
+		return;
+
+	ida_free(&iommu_global_pasid_ida, mm->pasid);
 }
diff --git a/drivers/iommu/iommu-sva.h b/drivers/iommu/iommu-sva.h
index 102eae1817a2..c22d0174ad61 100644
--- a/drivers/iommu/iommu-sva.h
+++ b/drivers/iommu/iommu-sva.h
@@ -8,8 +8,6 @@
 #include <linux/ioasid.h>
 #include <linux/mm_types.h>
 
-int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max);
-
 /* I/O Page fault */
 struct device;
 struct iommu_fault;
-- 
2.25.1

RE: [PATCH v8 4/7] iommu/sva: Stop using ioasid_set for SVA

[Tian, Kevin]

> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Sent: Thursday, March 23, 2023 4:08 AM
> 
> From: Jason Gunthorpe <jgg@nvidia.com>
> 
> Instead SVA drivers can use a simple global IDA to allocate PASIDs for
> each mm_struct.
> 
> Future work would be to allow drivers using the SVA APIs to reserve global
> PASIDs from this IDA for their internal use, eg with the DMA API PASID
> support.
> 
> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>

Reviewed-by: Kevin Tian <kevin.tian@intel.com>

[PATCH v8 5/7] iommu/sva: Use GFP_KERNEL for pasid allocation

[Jacob Pan]

We’re not using spinlock-protected IOASID allocation anymore, there’s
no need for GFP_ATOMIC.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 drivers/iommu/iommu-sva.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/iommu-sva.c b/drivers/iommu/iommu-sva.c
index 48e8a15ddc9b..c434b95dc8eb 100644
--- a/drivers/iommu/iommu-sva.c
+++ b/drivers/iommu/iommu-sva.c
@@ -28,8 +28,8 @@ static int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t ma
 		goto out;
 	}
 
-	ret = ida_alloc_range(&iommu_global_pasid_ida, min, max, GFP_ATOMIC);
-	if (ret < 0)
+	ret = ida_alloc_range(&iommu_global_pasid_ida, min, max, GFP_KERNEL);
+	if (ret < min)
 		goto out;
 	mm->pasid = ret;
 	ret = 0;
-- 
2.25.1

[PATCH v8 6/7] iommu/ioasid: Rename INVALID_IOASID

[Jacob Pan]

INVALID_IOASID and IOMMU_PASID_INVALID are duplicated. Rename
INVALID_IOASID and consolidate since we are moving away from IOASID
infrastructure.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>

---
v5:
	- Use pasid_valid() helper
---
 Documentation/x86/sva.rst   | 2 +-
 arch/x86/kernel/traps.c     | 2 +-
 drivers/dma/idxd/device.c   | 8 ++++----
 drivers/dma/idxd/idxd.h     | 1 +
 drivers/dma/idxd/init.c     | 2 +-
 drivers/dma/idxd/irq.c      | 2 +-
 drivers/iommu/intel/dmar.c  | 4 ++--
 drivers/iommu/intel/iommu.c | 2 +-
 drivers/iommu/intel/svm.c   | 2 +-
 include/linux/ioasid.h      | 1 +
 include/linux/iommu.h       | 6 +++---
 mm/init-mm.c                | 4 ++--
 12 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/Documentation/x86/sva.rst b/Documentation/x86/sva.rst
index 2e9b8b0f9a0f..33cb05005982 100644
--- a/Documentation/x86/sva.rst
+++ b/Documentation/x86/sva.rst
@@ -107,7 +107,7 @@ process share the same page tables, thus the same MSR value.
 PASID Life Cycle Management
 ===========================
 
-PASID is initialized as INVALID_IOASID (-1) when a process is created.
+PASID is initialized as IOMMU_PASID_INVALID (-1) when a process is created.
 
 Only processes that access SVA-capable devices need to have a PASID
 allocated. This allocation happens when a process opens/binds an SVA-capable
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index d317dc3d06a3..492a60febb11 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -40,7 +40,7 @@
 #include <linux/io.h>
 #include <linux/hardirq.h>
 #include <linux/atomic.h>
-#include <linux/ioasid.h>
+#include <linux/iommu.h>
 
 #include <asm/stacktrace.h>
 #include <asm/processor.h>
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 5f321f3b4242..6fca8fa8d3a8 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -1194,7 +1194,7 @@ static void idxd_device_set_perm_entry(struct idxd_device *idxd,
 {
 	union msix_perm mperm;
 
-	if (ie->pasid == INVALID_IOASID)
+	if (ie->pasid == IOMMU_PASID_INVALID)
 		return;
 
 	mperm.bits = 0;
@@ -1224,7 +1224,7 @@ void idxd_wq_free_irq(struct idxd_wq *wq)
 	idxd_device_clear_perm_entry(idxd, ie);
 	ie->vector = -1;
 	ie->int_handle = INVALID_INT_HANDLE;
-	ie->pasid = INVALID_IOASID;
+	ie->pasid = IOMMU_PASID_INVALID;
 }
 
 int idxd_wq_request_irq(struct idxd_wq *wq)
@@ -1240,7 +1240,7 @@ int idxd_wq_request_irq(struct idxd_wq *wq)
 
 	ie = &wq->ie;
 	ie->vector = pci_irq_vector(pdev, ie->id);
-	ie->pasid = device_pasid_enabled(idxd) ? idxd->pasid : INVALID_IOASID;
+	ie->pasid = device_pasid_enabled(idxd) ? idxd->pasid : IOMMU_PASID_INVALID;
 	idxd_device_set_perm_entry(idxd, ie);
 
 	rc = request_threaded_irq(ie->vector, NULL, idxd_wq_thread, 0, "idxd-portal", ie);
@@ -1265,7 +1265,7 @@ int idxd_wq_request_irq(struct idxd_wq *wq)
 	free_irq(ie->vector, ie);
 err_irq:
 	idxd_device_clear_perm_entry(idxd, ie);
-	ie->pasid = INVALID_IOASID;
+	ie->pasid = IOMMU_PASID_INVALID;
 	return rc;
 }
 
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index 7ced8d283d98..417e602a46b6 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -13,6 +13,7 @@
 #include <linux/ioasid.h>
 #include <linux/bitmap.h>
 #include <linux/perf_event.h>
+#include <linux/iommu.h>
 #include <uapi/linux/idxd.h>
 #include "registers.h"
 
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index 640d3048368e..e6ee267da0ff 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -105,7 +105,7 @@ static int idxd_setup_interrupts(struct idxd_device *idxd)
 		ie = idxd_get_ie(idxd, msix_idx);
 		ie->id = msix_idx;
 		ie->int_handle = INVALID_INT_HANDLE;
-		ie->pasid = INVALID_IOASID;
+		ie->pasid = IOMMU_PASID_INVALID;
 
 		spin_lock_init(&ie->list_lock);
 		init_llist_head(&ie->pending_llist);
diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c
index aa314ebec587..242f1f0b9f09 100644
--- a/drivers/dma/idxd/irq.c
+++ b/drivers/dma/idxd/irq.c
@@ -80,7 +80,7 @@ static void idxd_int_handle_revoke_drain(struct idxd_irq_entry *ie)
 	desc.opcode = DSA_OPCODE_DRAIN;
 	desc.priv = 1;
 
-	if (ie->pasid != INVALID_IOASID)
+	if (ie->pasid != IOMMU_PASID_INVALID)
 		desc.pasid = ie->pasid;
 	desc.int_handle = ie->int_handle;
 	portal = idxd_wq_portal_addr(wq);
diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 0f348439ef0e..10bb20ff50fd 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1958,7 +1958,7 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type,
 		return 0;
 	}
 
-	if (pasid == INVALID_IOASID)
+	if (pasid == IOMMU_PASID_INVALID)
 		pr_err("[%s NO_PASID] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
 		       type ? "DMA Read" : "DMA Write",
 		       source_id >> 8, PCI_SLOT(source_id & 0xFF),
@@ -2039,7 +2039,7 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
 		if (!ratelimited)
 			/* Using pasid -1 if pasid is not present */
 			dmar_fault_do_one(iommu, type, fault_reason,
-					  pasid_present ? pasid : INVALID_IOASID,
+					  pasid_present ? pasid : IOMMU_PASID_INVALID,
 					  source_id, guest_addr);
 
 		fault_index++;
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 21c14e00c852..0768dcae90fd 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -876,7 +876,7 @@ void dmar_fault_dump_ptes(struct intel_iommu *iommu, u16 source_id,
 		return;
 	}
 	/* For request-without-pasid, get the pasid from context entry */
-	if (intel_iommu_sm && pasid == INVALID_IOASID)
+	if (intel_iommu_sm && pasid == IOMMU_PASID_INVALID)
 		pasid = PASID_RID2PASID;
 
 	dir_index = pasid >> PASID_PDE_SHIFT;
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 7367f56c3bad..3848a1b0800c 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -273,7 +273,7 @@ static int pasid_to_svm_sdev(struct device *dev, unsigned int pasid,
 	if (WARN_ON(!mutex_is_locked(&pasid_mutex)))
 		return -EINVAL;
 
-	if (pasid == INVALID_IOASID || pasid >= PASID_MAX)
+	if (pasid == IOMMU_PASID_INVALID || pasid >= PASID_MAX)
 		return -EINVAL;
 
 	svm = pasid_private_find(pasid);
diff --git a/include/linux/ioasid.h b/include/linux/ioasid.h
index 734bf0e036ee..bbc9c6fd3310 100644
--- a/include/linux/ioasid.h
+++ b/include/linux/ioasid.h
@@ -7,6 +7,7 @@
 #include <linux/iommu.h>
 
 typedef unsigned int ioasid_t;
+#define INVALID_IOASID ((ioasid_t)-1)
 typedef ioasid_t (*ioasid_alloc_fn_t)(ioasid_t min, ioasid_t max, void *data);
 typedef void (*ioasid_free_fn_t)(ioasid_t ioasid, void *data);
 
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index d3f81dc6e4dd..54f535ff9868 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -192,7 +192,6 @@ enum iommu_dev_features {
 
 #define IOMMU_PASID_INVALID	(-1U)
 typedef unsigned int ioasid_t;
-#define INVALID_IOASID ((ioasid_t)-1)
 
 #ifdef CONFIG_IOMMU_API
 
@@ -1175,12 +1174,13 @@ static inline bool tegra_dev_iommu_get_stream_id(struct device *dev, u32 *stream
 
 static inline bool pasid_valid(ioasid_t ioasid)
 {
-	return ioasid != INVALID_IOASID;
+	return ioasid != IOMMU_PASID_INVALID;
 }
+
 #ifdef CONFIG_IOMMU_SVA
 static inline void mm_pasid_init(struct mm_struct *mm)
 {
-	mm->pasid = INVALID_IOASID;
+	mm->pasid = IOMMU_PASID_INVALID;
 }
 void mm_pasid_drop(struct mm_struct *mm);
 struct iommu_sva *iommu_sva_bind_device(struct device *dev,
diff --git a/mm/init-mm.c b/mm/init-mm.c
index c9327abb771c..a084039f55d8 100644
--- a/mm/init-mm.c
+++ b/mm/init-mm.c
@@ -10,7 +10,7 @@
 
 #include <linux/atomic.h>
 #include <linux/user_namespace.h>
-#include <linux/ioasid.h>
+#include <linux/iommu.h>
 #include <asm/mmu.h>
 
 #ifndef INIT_MM_CONTEXT
@@ -40,7 +40,7 @@ struct mm_struct init_mm = {
 	.user_ns	= &init_user_ns,
 	.cpu_bitmap	= CPU_BITS_NONE,
 #ifdef CONFIG_IOMMU_SVA
-	.pasid		= INVALID_IOASID,
+	.pasid		= IOMMU_PASID_INVALID,
 #endif
 	INIT_MM_CONTEXT(init_mm)
 };
-- 
2.25.1

[PATCH v8 7/7] iommu: Remove ioasid infrastructure

[Jacob Pan]

From: Jason Gunthorpe <jgg@nvidia.com>

This has no use anymore, delete it all.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
v3:	- put rename under a different patch
	- delete makefile and Kconfig
v2:
	- fix compile issue w/o CONFIG_IOMMU_SVA
	- consolidate INVALID_IOASID w/ IOMMU_PASID_INVALID
---
 drivers/dma/idxd/idxd.h     |   1 -
 drivers/iommu/Kconfig       |   5 -
 drivers/iommu/Makefile      |   1 -
 drivers/iommu/intel/iommu.h |   1 -
 drivers/iommu/intel/svm.c   |   1 -
 drivers/iommu/ioasid.c      | 422 ------------------------------------
 drivers/iommu/iommu-sva.h   |   1 -
 include/linux/ioasid.h      |  75 -------
 8 files changed, 507 deletions(-)
 delete mode 100644 drivers/iommu/ioasid.c
 delete mode 100644 include/linux/ioasid.h

diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index 417e602a46b6..dd2a6ed8949b 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -10,7 +10,6 @@
 #include <linux/cdev.h>
 #include <linux/idr.h>
 #include <linux/pci.h>
-#include <linux/ioasid.h>
 #include <linux/bitmap.h>
 #include <linux/perf_event.h>
 #include <linux/iommu.h>
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 889c7efd050b..a799221f8844 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -3,10 +3,6 @@
 config IOMMU_IOVA
 	tristate
 
-# The IOASID library may also be used by non-IOMMU_API users
-config IOASID
-	tristate
-
 # IOMMU_API always gets selected by whoever wants it.
 config IOMMU_API
 	bool
@@ -160,7 +156,6 @@ config IOMMU_DMA
 # Shared Virtual Addressing
 config IOMMU_SVA
 	bool
-	select IOASID
 
 config FSL_PAMU
 	bool "Freescale IOMMU support"
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index f461d0651385..769e43d780ce 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_IOMMU_IO_PGTABLE) += io-pgtable.o
 obj-$(CONFIG_IOMMU_IO_PGTABLE_ARMV7S) += io-pgtable-arm-v7s.o
 obj-$(CONFIG_IOMMU_IO_PGTABLE_LPAE) += io-pgtable-arm.o
 obj-$(CONFIG_IOMMU_IO_PGTABLE_DART) += io-pgtable-dart.o
-obj-$(CONFIG_IOASID) += ioasid.o
 obj-$(CONFIG_IOMMU_IOVA) += iova.o
 obj-$(CONFIG_OF_IOMMU)	+= of_iommu.o
 obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o
diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h
index a2010fb120e2..65b15be72878 100644
--- a/drivers/iommu/intel/iommu.h
+++ b/drivers/iommu/intel/iommu.h
@@ -19,7 +19,6 @@
 #include <linux/iommu.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/dmar.h>
-#include <linux/ioasid.h>
 #include <linux/bitfield.h>
 #include <linux/xarray.h>
 #include <linux/perf_event.h>
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 3848a1b0800c..e95b339e9cdc 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -16,7 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/mm_types.h>
 #include <linux/xarray.h>
-#include <linux/ioasid.h>
 #include <asm/page.h>
 #include <asm/fpu/api.h>
 
diff --git a/drivers/iommu/ioasid.c b/drivers/iommu/ioasid.c
deleted file mode 100644
index a786c034907c..000000000000
--- a/drivers/iommu/ioasid.c
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * I/O Address Space ID allocator. There is one global IOASID space, split into
- * subsets. Users create a subset with DECLARE_IOASID_SET, then allocate and
- * free IOASIDs with ioasid_alloc() and ioasid_free().
- */
-#include <linux/ioasid.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/xarray.h>
-
-struct ioasid_data {
-	ioasid_t id;
-	struct ioasid_set *set;
-	void *private;
-	struct rcu_head rcu;
-};
-
-/*
- * struct ioasid_allocator_data - Internal data structure to hold information
- * about an allocator. There are two types of allocators:
- *
- * - Default allocator always has its own XArray to track the IOASIDs allocated.
- * - Custom allocators may share allocation helpers with different private data.
- *   Custom allocators that share the same helper functions also share the same
- *   XArray.
- * Rules:
- * 1. Default allocator is always available, not dynamically registered. This is
- *    to prevent race conditions with early boot code that want to register
- *    custom allocators or allocate IOASIDs.
- * 2. Custom allocators take precedence over the default allocator.
- * 3. When all custom allocators sharing the same helper functions are
- *    unregistered (e.g. due to hotplug), all outstanding IOASIDs must be
- *    freed. Otherwise, outstanding IOASIDs will be lost and orphaned.
- * 4. When switching between custom allocators sharing the same helper
- *    functions, outstanding IOASIDs are preserved.
- * 5. When switching between custom allocator and default allocator, all IOASIDs
- *    must be freed to ensure unadulterated space for the new allocator.
- *
- * @ops:	allocator helper functions and its data
- * @list:	registered custom allocators
- * @slist:	allocators share the same ops but different data
- * @flags:	attributes of the allocator
- * @xa:		xarray holds the IOASID space
- * @rcu:	used for kfree_rcu when unregistering allocator
- */
-struct ioasid_allocator_data {
-	struct ioasid_allocator_ops *ops;
-	struct list_head list;
-	struct list_head slist;
-#define IOASID_ALLOCATOR_CUSTOM BIT(0) /* Needs framework to track results */
-	unsigned long flags;
-	struct xarray xa;
-	struct rcu_head rcu;
-};
-
-static DEFINE_SPINLOCK(ioasid_allocator_lock);
-static LIST_HEAD(allocators_list);
-
-static ioasid_t default_alloc(ioasid_t min, ioasid_t max, void *opaque);
-static void default_free(ioasid_t ioasid, void *opaque);
-
-static struct ioasid_allocator_ops default_ops = {
-	.alloc = default_alloc,
-	.free = default_free,
-};
-
-static struct ioasid_allocator_data default_allocator = {
-	.ops = &default_ops,
-	.flags = 0,
-	.xa = XARRAY_INIT(ioasid_xa, XA_FLAGS_ALLOC),
-};
-
-static struct ioasid_allocator_data *active_allocator = &default_allocator;
-
-static ioasid_t default_alloc(ioasid_t min, ioasid_t max, void *opaque)
-{
-	ioasid_t id;
-
-	if (xa_alloc(&default_allocator.xa, &id, opaque, XA_LIMIT(min, max), GFP_ATOMIC)) {
-		pr_err("Failed to alloc ioasid from %d to %d\n", min, max);
-		return INVALID_IOASID;
-	}
-
-	return id;
-}
-
-static void default_free(ioasid_t ioasid, void *opaque)
-{
-	struct ioasid_data *ioasid_data;
-
-	ioasid_data = xa_erase(&default_allocator.xa, ioasid);
-	kfree_rcu(ioasid_data, rcu);
-}
-
-/* Allocate and initialize a new custom allocator with its helper functions */
-static struct ioasid_allocator_data *ioasid_alloc_allocator(struct ioasid_allocator_ops *ops)
-{
-	struct ioasid_allocator_data *ia_data;
-
-	ia_data = kzalloc(sizeof(*ia_data), GFP_ATOMIC);
-	if (!ia_data)
-		return NULL;
-
-	xa_init_flags(&ia_data->xa, XA_FLAGS_ALLOC);
-	INIT_LIST_HEAD(&ia_data->slist);
-	ia_data->flags |= IOASID_ALLOCATOR_CUSTOM;
-	ia_data->ops = ops;
-
-	/* For tracking custom allocators that share the same ops */
-	list_add_tail(&ops->list, &ia_data->slist);
-
-	return ia_data;
-}
-
-static bool use_same_ops(struct ioasid_allocator_ops *a, struct ioasid_allocator_ops *b)
-{
-	return (a->free == b->free) && (a->alloc == b->alloc);
-}
-
-/**
- * ioasid_register_allocator - register a custom allocator
- * @ops: the custom allocator ops to be registered
- *
- * Custom allocators take precedence over the default xarray based allocator.
- * Private data associated with the IOASID allocated by the custom allocators
- * are managed by IOASID framework similar to data stored in xa by default
- * allocator.
- *
- * There can be multiple allocators registered but only one is active. In case
- * of runtime removal of a custom allocator, the next one is activated based
- * on the registration ordering.
- *
- * Multiple allocators can share the same alloc() function, in this case the
- * IOASID space is shared.
- */
-int ioasid_register_allocator(struct ioasid_allocator_ops *ops)
-{
-	struct ioasid_allocator_data *ia_data;
-	struct ioasid_allocator_data *pallocator;
-	int ret = 0;
-
-	spin_lock(&ioasid_allocator_lock);
-
-	ia_data = ioasid_alloc_allocator(ops);
-	if (!ia_data) {
-		ret = -ENOMEM;
-		goto out_unlock;
-	}
-
-	/*
-	 * No particular preference, we activate the first one and keep
-	 * the later registered allocators in a list in case the first one gets
-	 * removed due to hotplug.
-	 */
-	if (list_empty(&allocators_list)) {
-		WARN_ON(active_allocator != &default_allocator);
-		/* Use this new allocator if default is not active */
-		if (xa_empty(&active_allocator->xa)) {
-			rcu_assign_pointer(active_allocator, ia_data);
-			list_add_tail(&ia_data->list, &allocators_list);
-			goto out_unlock;
-		}
-		pr_warn("Default allocator active with outstanding IOASID\n");
-		ret = -EAGAIN;
-		goto out_free;
-	}
-
-	/* Check if the allocator is already registered */
-	list_for_each_entry(pallocator, &allocators_list, list) {
-		if (pallocator->ops == ops) {
-			pr_err("IOASID allocator already registered\n");
-			ret = -EEXIST;
-			goto out_free;
-		} else if (use_same_ops(pallocator->ops, ops)) {
-			/*
-			 * If the new allocator shares the same ops,
-			 * then they will share the same IOASID space.
-			 * We should put them under the same xarray.
-			 */
-			list_add_tail(&ops->list, &pallocator->slist);
-			goto out_free;
-		}
-	}
-	list_add_tail(&ia_data->list, &allocators_list);
-
-	spin_unlock(&ioasid_allocator_lock);
-	return 0;
-out_free:
-	kfree(ia_data);
-out_unlock:
-	spin_unlock(&ioasid_allocator_lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ioasid_register_allocator);
-
-/**
- * ioasid_unregister_allocator - Remove a custom IOASID allocator ops
- * @ops: the custom allocator to be removed
- *
- * Remove an allocator from the list, activate the next allocator in
- * the order it was registered. Or revert to default allocator if all
- * custom allocators are unregistered without outstanding IOASIDs.
- */
-void ioasid_unregister_allocator(struct ioasid_allocator_ops *ops)
-{
-	struct ioasid_allocator_data *pallocator;
-	struct ioasid_allocator_ops *sops;
-
-	spin_lock(&ioasid_allocator_lock);
-	if (list_empty(&allocators_list)) {
-		pr_warn("No custom IOASID allocators active!\n");
-		goto exit_unlock;
-	}
-
-	list_for_each_entry(pallocator, &allocators_list, list) {
-		if (!use_same_ops(pallocator->ops, ops))
-			continue;
-
-		if (list_is_singular(&pallocator->slist)) {
-			/* No shared helper functions */
-			list_del(&pallocator->list);
-			/*
-			 * All IOASIDs should have been freed before
-			 * the last allocator that shares the same ops
-			 * is unregistered.
-			 */
-			WARN_ON(!xa_empty(&pallocator->xa));
-			if (list_empty(&allocators_list)) {
-				pr_info("No custom IOASID allocators, switch to default.\n");
-				rcu_assign_pointer(active_allocator, &default_allocator);
-			} else if (pallocator == active_allocator) {
-				rcu_assign_pointer(active_allocator,
-						list_first_entry(&allocators_list,
-								struct ioasid_allocator_data, list));
-				pr_info("IOASID allocator changed");
-			}
-			kfree_rcu(pallocator, rcu);
-			break;
-		}
-		/*
-		 * Find the matching shared ops to delete,
-		 * but keep outstanding IOASIDs
-		 */
-		list_for_each_entry(sops, &pallocator->slist, list) {
-			if (sops == ops) {
-				list_del(&ops->list);
-				break;
-			}
-		}
-		break;
-	}
-
-exit_unlock:
-	spin_unlock(&ioasid_allocator_lock);
-}
-EXPORT_SYMBOL_GPL(ioasid_unregister_allocator);
-
-/**
- * ioasid_set_data - Set private data for an allocated ioasid
- * @ioasid: the ID to set data
- * @data:   the private data
- *
- * For IOASID that is already allocated, private data can be set
- * via this API. Future lookup can be done via ioasid_find.
- */
-int ioasid_set_data(ioasid_t ioasid, void *data)
-{
-	struct ioasid_data *ioasid_data;
-	int ret = 0;
-
-	spin_lock(&ioasid_allocator_lock);
-	ioasid_data = xa_load(&active_allocator->xa, ioasid);
-	if (ioasid_data)
-		rcu_assign_pointer(ioasid_data->private, data);
-	else
-		ret = -ENOENT;
-	spin_unlock(&ioasid_allocator_lock);
-
-	/*
-	 * Wait for readers to stop accessing the old private data, so the
-	 * caller can free it.
-	 */
-	if (!ret)
-		synchronize_rcu();
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ioasid_set_data);
-
-/**
- * ioasid_alloc - Allocate an IOASID
- * @set: the IOASID set
- * @min: the minimum ID (inclusive)
- * @max: the maximum ID (inclusive)
- * @private: data private to the caller
- *
- * Allocate an ID between @min and @max. The @private pointer is stored
- * internally and can be retrieved with ioasid_find().
- *
- * Return: the allocated ID on success, or %INVALID_IOASID on failure.
- */
-ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min, ioasid_t max,
-		      void *private)
-{
-	struct ioasid_data *data;
-	void *adata;
-	ioasid_t id;
-
-	data = kzalloc(sizeof(*data), GFP_ATOMIC);
-	if (!data)
-		return INVALID_IOASID;
-
-	data->set = set;
-	data->private = private;
-
-	/*
-	 * Custom allocator needs allocator data to perform platform specific
-	 * operations.
-	 */
-	spin_lock(&ioasid_allocator_lock);
-	adata = active_allocator->flags & IOASID_ALLOCATOR_CUSTOM ? active_allocator->ops->pdata : data;
-	id = active_allocator->ops->alloc(min, max, adata);
-	if (id == INVALID_IOASID) {
-		pr_err("Failed ASID allocation %lu\n", active_allocator->flags);
-		goto exit_free;
-	}
-
-	if ((active_allocator->flags & IOASID_ALLOCATOR_CUSTOM) &&
-	     xa_alloc(&active_allocator->xa, &id, data, XA_LIMIT(id, id), GFP_ATOMIC)) {
-		/* Custom allocator needs framework to store and track allocation results */
-		pr_err("Failed to alloc ioasid from %d\n", id);
-		active_allocator->ops->free(id, active_allocator->ops->pdata);
-		goto exit_free;
-	}
-	data->id = id;
-
-	spin_unlock(&ioasid_allocator_lock);
-	return id;
-exit_free:
-	spin_unlock(&ioasid_allocator_lock);
-	kfree(data);
-	return INVALID_IOASID;
-}
-EXPORT_SYMBOL_GPL(ioasid_alloc);
-
-/**
- * ioasid_free - Free an ioasid
- * @ioasid: the ID to remove
- */
-void ioasid_free(ioasid_t ioasid)
-{
-	struct ioasid_data *ioasid_data;
-
-	spin_lock(&ioasid_allocator_lock);
-	ioasid_data = xa_load(&active_allocator->xa, ioasid);
-	if (!ioasid_data) {
-		pr_err("Trying to free unknown IOASID %u\n", ioasid);
-		goto exit_unlock;
-	}
-
-	active_allocator->ops->free(ioasid, active_allocator->ops->pdata);
-	/* Custom allocator needs additional steps to free the xa element */
-	if (active_allocator->flags & IOASID_ALLOCATOR_CUSTOM) {
-		ioasid_data = xa_erase(&active_allocator->xa, ioasid);
-		kfree_rcu(ioasid_data, rcu);
-	}
-
-exit_unlock:
-	spin_unlock(&ioasid_allocator_lock);
-}
-EXPORT_SYMBOL_GPL(ioasid_free);
-
-/**
- * ioasid_find - Find IOASID data
- * @set: the IOASID set
- * @ioasid: the IOASID to find
- * @getter: function to call on the found object
- *
- * The optional getter function allows to take a reference to the found object
- * under the rcu lock. The function can also check if the object is still valid:
- * if @getter returns false, then the object is invalid and NULL is returned.
- *
- * If the IOASID exists, return the private pointer passed to ioasid_alloc.
- * Private data can be NULL if not set. Return an error if the IOASID is not
- * found, or if @set is not NULL and the IOASID does not belong to the set.
- */
-void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid,
-		  bool (*getter)(void *))
-{
-	void *priv;
-	struct ioasid_data *ioasid_data;
-	struct ioasid_allocator_data *idata;
-
-	rcu_read_lock();
-	idata = rcu_dereference(active_allocator);
-	ioasid_data = xa_load(&idata->xa, ioasid);
-	if (!ioasid_data) {
-		priv = ERR_PTR(-ENOENT);
-		goto unlock;
-	}
-	if (set && ioasid_data->set != set) {
-		/* data found but does not belong to the set */
-		priv = ERR_PTR(-EACCES);
-		goto unlock;
-	}
-	/* Now IOASID and its set is verified, we can return the private data */
-	priv = rcu_dereference(ioasid_data->private);
-	if (getter && !getter(priv))
-		priv = NULL;
-unlock:
-	rcu_read_unlock();
-
-	return priv;
-}
-EXPORT_SYMBOL_GPL(ioasid_find);
-
-MODULE_AUTHOR("Jean-Philippe Brucker <jean-philippe.brucker@arm.com>");
-MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
-MODULE_DESCRIPTION("IO Address Space ID (IOASID) allocator");
-MODULE_LICENSE("GPL");
diff --git a/drivers/iommu/iommu-sva.h b/drivers/iommu/iommu-sva.h
index c22d0174ad61..54946b5a7caf 100644
--- a/drivers/iommu/iommu-sva.h
+++ b/drivers/iommu/iommu-sva.h
@@ -5,7 +5,6 @@
 #ifndef _IOMMU_SVA_H
 #define _IOMMU_SVA_H
 
-#include <linux/ioasid.h>
 #include <linux/mm_types.h>
 
 /* I/O Page fault */
diff --git a/include/linux/ioasid.h b/include/linux/ioasid.h
deleted file mode 100644
index bbc9c6fd3310..000000000000
--- a/include/linux/ioasid.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __LINUX_IOASID_H
-#define __LINUX_IOASID_H
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/iommu.h>
-
-typedef unsigned int ioasid_t;
-#define INVALID_IOASID ((ioasid_t)-1)
-typedef ioasid_t (*ioasid_alloc_fn_t)(ioasid_t min, ioasid_t max, void *data);
-typedef void (*ioasid_free_fn_t)(ioasid_t ioasid, void *data);
-
-struct ioasid_set {
-	int dummy;
-};
-
-/**
- * struct ioasid_allocator_ops - IOASID allocator helper functions and data
- *
- * @alloc:	helper function to allocate IOASID
- * @free:	helper function to free IOASID
- * @list:	for tracking ops that share helper functions but not data
- * @pdata:	data belong to the allocator, provided when calling alloc()
- */
-struct ioasid_allocator_ops {
-	ioasid_alloc_fn_t alloc;
-	ioasid_free_fn_t free;
-	struct list_head list;
-	void *pdata;
-};
-
-#define DECLARE_IOASID_SET(name) struct ioasid_set name = { 0 }
-
-#if IS_ENABLED(CONFIG_IOASID)
-ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min, ioasid_t max,
-		      void *private);
-void ioasid_free(ioasid_t ioasid);
-void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid,
-		  bool (*getter)(void *));
-int ioasid_register_allocator(struct ioasid_allocator_ops *allocator);
-void ioasid_unregister_allocator(struct ioasid_allocator_ops *allocator);
-int ioasid_set_data(ioasid_t ioasid, void *data);
-
-#else /* !CONFIG_IOASID */
-static inline ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min,
-				    ioasid_t max, void *private)
-{
-	return INVALID_IOASID;
-}
-
-static inline void ioasid_free(ioasid_t ioasid) { }
-
-static inline void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid,
-				bool (*getter)(void *))
-{
-	return NULL;
-}
-
-static inline int ioasid_register_allocator(struct ioasid_allocator_ops *allocator)
-{
-	return -ENOTSUPP;
-}
-
-static inline void ioasid_unregister_allocator(struct ioasid_allocator_ops *allocator)
-{
-}
-
-static inline int ioasid_set_data(ioasid_t ioasid, void *data)
-{
-	return -ENOTSUPP;
-}
-
-#endif /* CONFIG_IOASID */
-#endif /* __LINUX_IOASID_H */
-- 
2.25.1

Re: [PATCH v8 0/7] Remove VT-d virtual command interface and IOASID

[Jason Gunthorpe]

On Wed, Mar 22, 2023 at 01:07:56PM -0700, Jacob Pan wrote:
> Hi all,
> 
> This patch set removes unused VT-d virtual command interface followed by
> removal of the IOASID infrastructure.
> 
> This has only been tested on x86 platforms, need help with testing on ARM
> SMMU and other architectures.
> 
> 
> Thanks,
> 
> Jacob
> 
> ChangeLog:
> v8:
>  - remove #ifdef CONFIG_IOMMU_SVA since we have dummy inline functions.
>  - fixed a compile bug that affects bisectability

I think this looks OK now, thanks

Jason

Re: [PATCH v8 0/7] Remove VT-d virtual command interface and IOASID

[Jacob Pan]

Hi Joerg et al,

Just wondering if there are any other comments? Should i spin another
version to include Reviewed-by tags from Kevin?

I have a patchset below depends on this one.

https://lore.kernel.org/linux-iommu/20230327232138.1490712-1-jacob.jun.pan@linux.intel.com/T/#t

Thank you everyone,

Jacob

On Thu, 23 Mar 2023 11:44:44 -0300, Jason Gunthorpe <jgg@nvidia.com> wrote:

> On Wed, Mar 22, 2023 at 01:07:56PM -0700, Jacob Pan wrote:
> > Hi all,
> > 
> > This patch set removes unused VT-d virtual command interface followed by
> > removal of the IOASID infrastructure.
> > 
> > This has only been tested on x86 platforms, need help with testing on
> > ARM SMMU and other architectures.
> > 
> > 
> > Thanks,
> > 
> > Jacob
> > 
> > ChangeLog:
> > v8:
> >  - remove #ifdef CONFIG_IOMMU_SVA since we have dummy inline functions.
> >  - fixed a compile bug that affects bisectability  
> 
> I think this looks OK now, thanks
> 
> Jason


Thanks,

Jacob

Re: [PATCH v8 0/7] Remove VT-d virtual command interface and IOASID

[Joerg Roedel]

On Wed, Mar 22, 2023 at 01:07:56PM -0700, Jacob Pan wrote:
> Jacob Pan (5):
>   iommu/vt-d: Remove virtual command interface
>   iommu/sva: Move PASID helpers to sva code
>   iommu/sva: Remove PASID to mm lookup function
>   iommu/sva: Use GFP_KERNEL for pasid allocation
>   iommu/ioasid: Rename INVALID_IOASID
> 
> Jason Gunthorpe (2):
>   iommu/sva: Stop using ioasid_set for SVA
>   iommu: Remove ioasid infrastructure

Applied, thanks.