From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com,
Somnath Kotur <somnath.kotur@broadcom.com>,
Kalesh AP <kalesh-anakkur.purayil@broadcom.com>,
Lance Richardson <lance.richardson@broadcom.com>
Subject: [dpdk-dev] [PATCH 3/6] net/bnxt: driver to use configured MTU value during load
Date: Sat, 8 Jun 2019 23:22:05 +0400 [thread overview]
Message-ID: <20190608192208.77607-4-ajit.khaparde@broadcom.com> (raw)
In-Reply-To: <20190608192208.77607-1-ajit.khaparde@broadcom.com>
From: Somnath Kotur <somnath.kotur@broadcom.com>
The MTU value of a port can be (re)configured out-of-band.
FW will be returning this configured MTU as part of func_qcfg cmd.
Driver to use this value during load time.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_cpr.c | 2 +-
drivers/net/bnxt/bnxt_ethdev.c | 7 ++++++-
drivers/net/bnxt/bnxt_hwrm.c | 5 ++++-
drivers/net/bnxt/bnxt_hwrm.h | 2 +-
4 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_cpr.c b/drivers/net/bnxt/bnxt_cpr.c
index 0fd6e51e5..655bcf1a8 100644
--- a/drivers/net/bnxt/bnxt_cpr.c
+++ b/drivers/net/bnxt/bnxt_cpr.c
@@ -35,7 +35,7 @@ void bnxt_handle_async_event(struct bnxt *bp,
break;
case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE:
PMD_DRV_LOG(INFO, "Async event: VF config changed\n");
- bnxt_hwrm_func_qcfg(bp);
+ bnxt_hwrm_func_qcfg(bp, NULL);
break;
case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED:
PMD_DRV_LOG(INFO, "Port conn async event\n");
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index ee775b125..e527df1bf 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -3654,6 +3654,7 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
uint32_t total_alloc_len;
rte_iova_t mz_phys_addr;
struct bnxt *bp;
+ uint16_t mtu;
int rc;
if (version_printed++ == 0)
@@ -3906,12 +3907,16 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
pci_dev->mem_resource[0].phys_addr,
pci_dev->mem_resource[0].addr);
- rc = bnxt_hwrm_func_qcfg(bp);
+ rc = bnxt_hwrm_func_qcfg(bp, &mtu);
if (rc) {
PMD_DRV_LOG(ERR, "hwrm func qcfg failed\n");
goto error_free;
}
+ if (mtu >= ETHER_MIN_MTU && mtu <= BNXT_MAX_MTU &&
+ mtu != eth_dev->data->mtu)
+ eth_dev->data->mtu = mtu;
+
if (BNXT_PF(bp)) {
//if (bp->pf.active_vfs) {
// TODO: Deallocate VF resources?
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 09fee3d39..696974c83 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2638,7 +2638,7 @@ int bnxt_set_hwrm_link_config(struct bnxt *bp, bool link_up)
}
/* JIRA 22088 */
-int bnxt_hwrm_func_qcfg(struct bnxt *bp)
+int bnxt_hwrm_func_qcfg(struct bnxt *bp, uint16_t *mtu)
{
struct hwrm_func_qcfg_input req = {0};
struct hwrm_func_qcfg_output *resp = bp->hwrm_cmd_resp_addr;
@@ -2663,6 +2663,9 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp)
PMD_DRV_LOG(INFO, "Trusted VF cap enabled\n");
}
+ if (mtu)
+ *mtu = resp->mtu;
+
switch (resp->port_partition_type) {
case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0:
case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5:
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index cd8bb79f9..e35462cb4 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -127,7 +127,7 @@ void bnxt_free_hwrm_rx_ring(struct bnxt *bp, int queue_index);
int bnxt_alloc_hwrm_resources(struct bnxt *bp);
int bnxt_get_hwrm_link_config(struct bnxt *bp, struct rte_eth_link *link);
int bnxt_set_hwrm_link_config(struct bnxt *bp, bool link_up);
-int bnxt_hwrm_func_qcfg(struct bnxt *bp);
+int bnxt_hwrm_func_qcfg(struct bnxt *bp, uint16_t *mtu);
int bnxt_hwrm_func_resc_qcaps(struct bnxt *bp);
int bnxt_hwrm_func_reserve_vf_resc(struct bnxt *bp, bool test);
int bnxt_hwrm_allocate_pf_only(struct bnxt *bp);
--
2.20.1 (Apple Git-117)
next prev parent reply other threads:[~2019-06-08 19:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-08 19:22 [dpdk-dev] [PATCH 0/6] bnxt patch series Ajit Khaparde
2019-06-08 19:22 ` [dpdk-dev] [PATCH 1/6] net/bnxt: add code to redirect tunnel packets Ajit Khaparde
2019-06-08 19:22 ` [dpdk-dev] [PATCH 2/6] net/bnxt: fix to check for NULL completion ring doorbell in int_handler Ajit Khaparde
2019-06-12 14:44 ` Ferruh Yigit
2019-06-12 14:49 ` Ferruh Yigit
2019-06-08 19:22 ` Ajit Khaparde [this message]
2019-06-08 19:22 ` [dpdk-dev] [PATCH 4/6] net/bnxt: fix output of port xstats Ajit Khaparde
2019-06-08 19:22 ` [dpdk-dev] [PATCH 5/6] net/bnxt: fix interrupt vector array initialization Ajit Khaparde
2019-06-08 19:22 ` [dpdk-dev] [PATCH 6/6] net/bnxt: address build errors reported by intel compiler Ajit Khaparde
2019-06-12 15:41 ` [dpdk-dev] [PATCH 0/6] bnxt patch series Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190608192208.77607-4-ajit.khaparde@broadcom.com \
--to=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=lance.richardson@broadcom.com \
--cc=somnath.kotur@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).