DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: "Yao, Lei A" <lei.a.yao@intel.com>
To: Nithin Dabilpuram <ndabilpuram@marvell.com>,
	Hyong Youb Kim <hyonkim@cisco.com>,
	David Marchand <david.marchand@redhat.com>,
	"Thomas Monjalon" <thomas@monjalon.net>,
	"Yigit, Ferruh" <ferruh.yigit@intel.com>,
	"Burakov, Anatoly" <anatoly.burakov@intel.com>
Cc: "jerinj@marvell.com" <jerinj@marvell.com>,
	John Daley <johndale@cisco.com>,
	Shahed Shaikh <shshaikh@marvell.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 1/3] vfio: revert change that does intr	eventfd setup at probe
Date: Fri, 19 Jul 2019 08:28:32 +0000
Message-ID: <2DBBFF226F7CF64BAFCA79B681719D9549737EB6@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <20190718143628.169623-2-ndabilpuram@marvell.com>



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Nithin Dabilpuram
> Sent: Thursday, July 18, 2019 10:36 PM
> To: Hyong Youb Kim <hyonkim@cisco.com>; David Marchand
> <david.marchand@redhat.com>; Thomas Monjalon
> <thomas@monjalon.net>; Yigit, Ferruh <ferruh.yigit@intel.com>; Burakov,
> Anatoly <anatoly.burakov@intel.com>
> Cc: jerinj@marvell.com; John Daley <johndale@cisco.com>; Shahed Shaikh
> <shshaikh@marvell.com>; dev@dpdk.org; Nithin Dabilpuram
> <ndabilpuram@marvell.com>
> Subject: [dpdk-dev] [PATCH v4 1/3] vfio: revert change that does intr
> eventfd setup at probe
> 
> This reverts commit 89aac60e0be9ed95a87b16e3595f102f9faaffb4.
> "vfio: fix interrupts race condition"
> 
> The above mentioned commit moves the interrupt's eventfd setup
> to probe time but only enables one interrupt for all types of
> interrupt handles i.e VFIO_MSI, VFIO_LEGACY, VFIO_MSIX, UIO.
> It works fine with default case but breaks below cases specifically
> for MSIX based interrupt handles.
> 
> * Applications like l3fwd-power that request rxq interrupts
>   while ethdev setup.
> * Drivers that need > 1 MSIx interrupts to be configured for
>   functionality to work.
> 
> VFIO PCI for MSIx expects all the possible vectors to be setup up
> when using VFIO_IRQ_SET_ACTION_TRIGGER so that they can be
> allocated from kernel pci subsystem. Only way to increase the number
> of vectors later is first free all by using VFIO_IRQ_SET_DATA_NONE
> with action trigger and then enable new vector count.
> 
> Above commit changes the behavior of rte_intr_[enable|disable] to
> only mask and unmask unlike earlier behavior and thereby
> breaking above two scenarios.
> 
> Fixes: 89aac60e0be9 ("vfio: fix interrupts race condition")
> Cc: david.marchand@redhat.com
> 
> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
> Signed-off-by: Jerin Jacob <jerinj@marvell.com>
> Tested-by: Stephen Hemminger <stephen@networkplumber.org>
> Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Lei Yao <lei.a.yao@Intel.com>

This patch set  pass the interrupt test with ixgbe, i40e and virtio.
> ---
> v4:
> * No change.
> v3:
> * Update Shahed Shaikh's tested-by
> v2:
> * Include tested by sign from Stephen
> 
>  drivers/bus/pci/linux/pci_vfio.c          |  78 ++++++------
>  lib/librte_eal/linux/eal/eal_interrupts.c | 201 +++++++++++++++++++++++-
> ------
>  2 files changed, 191 insertions(+), 88 deletions(-)
> 
> diff --git a/drivers/bus/pci/linux/pci_vfio.c b/drivers/bus/pci/linux/pci_vfio.c
> index ee31239..1ceb1c0 100644
> --- a/drivers/bus/pci/linux/pci_vfio.c
> +++ b/drivers/bus/pci/linux/pci_vfio.c
> @@ -187,11 +187,8 @@ pci_vfio_set_bus_master(int dev_fd, bool op)
>  static int
>  pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
>  {
> -	char irq_set_buf[sizeof(struct vfio_irq_set) + sizeof(int)];
> -	struct vfio_irq_set *irq_set;
> -	enum rte_intr_mode intr_mode;
>  	int i, ret, intr_idx;
> -	int fd;
> +	enum rte_intr_mode intr_mode;
> 
>  	/* default to invalid index */
>  	intr_idx = VFIO_PCI_NUM_IRQS;
> @@ -223,6 +220,7 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev,
> int vfio_dev_fd)
>  	/* start from MSI-X interrupt type */
>  	for (i = VFIO_PCI_MSIX_IRQ_INDEX; i >= 0; i--) {
>  		struct vfio_irq_info irq = { .argsz = sizeof(irq) };
> +		int fd = -1;
> 
>  		/* skip interrupt modes we don't want */
>  		if (intr_mode != RTE_INTR_MODE_NONE &&
> @@ -238,51 +236,51 @@ pci_vfio_setup_interrupts(struct rte_pci_device
> *dev, int vfio_dev_fd)
>  			return -1;
>  		}
> 
> -		/* found a usable interrupt mode */
> -		if ((irq.flags & VFIO_IRQ_INFO_EVENTFD) != 0)
> -			break;
> -
>  		/* if this vector cannot be used with eventfd, fail if we
> explicitly
>  		 * specified interrupt type, otherwise continue */
> -		if (intr_mode != RTE_INTR_MODE_NONE) {
> -			RTE_LOG(ERR, EAL, "  interrupt vector does not
> support eventfd!\n");
> +		if ((irq.flags & VFIO_IRQ_INFO_EVENTFD) == 0) {
> +			if (intr_mode != RTE_INTR_MODE_NONE) {
> +				RTE_LOG(ERR, EAL,
> +						"  interrupt vector does not
> support eventfd!\n");
> +				return -1;
> +			} else
> +				continue;
> +		}
> +
> +		/* set up an eventfd for interrupts */
> +		fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
> +		if (fd < 0) {
> +			RTE_LOG(ERR, EAL, "  cannot set up eventfd, "
> +					"error %i (%s)\n", errno,
> strerror(errno));
>  			return -1;
>  		}
> -	}
> 
> -	if (i < 0)
> -		return -1;
> +		dev->intr_handle.fd = fd;
> +		dev->intr_handle.vfio_dev_fd = vfio_dev_fd;
> 
> -	fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
> -	if (fd < 0) {
> -		RTE_LOG(ERR, EAL, "  cannot set up eventfd, error %i (%s)\n",
> -			errno, strerror(errno));
> -		return -1;
> -	}
> +		switch (i) {
> +		case VFIO_PCI_MSIX_IRQ_INDEX:
> +			intr_mode = RTE_INTR_MODE_MSIX;
> +			dev->intr_handle.type =
> RTE_INTR_HANDLE_VFIO_MSIX;
> +			break;
> +		case VFIO_PCI_MSI_IRQ_INDEX:
> +			intr_mode = RTE_INTR_MODE_MSI;
> +			dev->intr_handle.type =
> RTE_INTR_HANDLE_VFIO_MSI;
> +			break;
> +		case VFIO_PCI_INTX_IRQ_INDEX:
> +			intr_mode = RTE_INTR_MODE_LEGACY;
> +			dev->intr_handle.type =
> RTE_INTR_HANDLE_VFIO_LEGACY;
> +			break;
> +		default:
> +			RTE_LOG(ERR, EAL, "  unknown interrupt type!\n");
> +			return -1;
> +		}
> 
> -	irq_set = (struct vfio_irq_set *)irq_set_buf;
> -	irq_set->argsz = sizeof(irq_set_buf);
> -	irq_set->flags =
> VFIO_IRQ_SET_DATA_EVENTFD|VFIO_IRQ_SET_ACTION_TRIGGER;
> -	irq_set->index = i;
> -	irq_set->start = 0;
> -	irq_set->count = 1;
> -	memcpy(&irq_set->data, &fd, sizeof(int));
> -	if (ioctl(vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set) < 0) {
> -		RTE_LOG(ERR, EAL, "  error configuring interrupt\n");
> -		close(fd);
> -		return -1;
> +		return 0;
>  	}
> 
> -	dev->intr_handle.fd = fd;
> -	dev->intr_handle.vfio_dev_fd = vfio_dev_fd;
> -	if (i == VFIO_PCI_MSIX_IRQ_INDEX)
> -		dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSIX;
> -	else if (i == VFIO_PCI_MSI_IRQ_INDEX)
> -		dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSI;
> -	else if (i == VFIO_PCI_INTX_IRQ_INDEX)
> -		dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_LEGACY;
> -
> -	return 0;
> +	/* if we're here, we haven't found a suitable interrupt vector */
> +	return -1;
>  }
> 
>  #ifdef HAVE_VFIO_DEV_REQ_INTERFACE
> diff --git a/lib/librte_eal/linux/eal/eal_interrupts.c
> b/lib/librte_eal/linux/eal/eal_interrupts.c
> index 27976b3..79ad5e8 100644
> --- a/lib/librte_eal/linux/eal/eal_interrupts.c
> +++ b/lib/librte_eal/linux/eal/eal_interrupts.c
> @@ -109,19 +109,42 @@ static pthread_t intr_thread;
> 
>  /* enable legacy (INTx) interrupts */
>  static int
> -vfio_enable_intx(const struct rte_intr_handle *intr_handle)
> -{
> -	struct vfio_irq_set irq_set;
> -	int ret;
> -
> -	/* unmask INTx */
> -	irq_set.argsz = sizeof(irq_set);
> -	irq_set.flags = VFIO_IRQ_SET_DATA_NONE |
> VFIO_IRQ_SET_ACTION_UNMASK;
> -	irq_set.index = VFIO_PCI_INTX_IRQ_INDEX;
> -	irq_set.start = 0;
> -	irq_set.count = 1;
> -
> -	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> &irq_set);
> +vfio_enable_intx(const struct rte_intr_handle *intr_handle) {
> +	struct vfio_irq_set *irq_set;
> +	char irq_set_buf[IRQ_SET_BUF_LEN];
> +	int len, ret;
> +	int *fd_ptr;
> +
> +	len = sizeof(irq_set_buf);
> +
> +	/* enable INTx */
> +	irq_set = (struct vfio_irq_set *) irq_set_buf;
> +	irq_set->argsz = len;
> +	irq_set->count = 1;
> +	irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
> VFIO_IRQ_SET_ACTION_TRIGGER;
> +	irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
> +	irq_set->start = 0;
> +	fd_ptr = (int *) &irq_set->data;
> +	*fd_ptr = intr_handle->fd;
> +
> +	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> irq_set);
> +
> +	if (ret) {
> +		RTE_LOG(ERR, EAL, "Error enabling INTx interrupts for
> fd %d\n",
> +						intr_handle->fd);
> +		return -1;
> +	}
> +
> +	/* unmask INTx after enabling */
> +	memset(irq_set, 0, len);
> +	len = sizeof(struct vfio_irq_set);
> +	irq_set->argsz = len;
> +	irq_set->count = 1;
> +	irq_set->flags = VFIO_IRQ_SET_DATA_NONE |
> VFIO_IRQ_SET_ACTION_UNMASK;
> +	irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
> +	irq_set->start = 0;
> +
> +	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> irq_set);
> 
>  	if (ret) {
>  		RTE_LOG(ERR, EAL, "Error unmasking INTx interrupts for
> fd %d\n",
> @@ -133,51 +156,128 @@ vfio_enable_intx(const struct rte_intr_handle
> *intr_handle)
> 
>  /* disable legacy (INTx) interrupts */
>  static int
> -vfio_disable_intx(const struct rte_intr_handle *intr_handle)
> -{
> -	struct vfio_irq_set irq_set;
> -	int ret;
> +vfio_disable_intx(const struct rte_intr_handle *intr_handle) {
> +	struct vfio_irq_set *irq_set;
> +	char irq_set_buf[IRQ_SET_BUF_LEN];
> +	int len, ret;
> 
> -	/* mask interrupts */
> -	irq_set.argsz = sizeof(irq_set);
> -	irq_set.flags = VFIO_IRQ_SET_DATA_NONE |
> VFIO_IRQ_SET_ACTION_MASK;
> -	irq_set.index = VFIO_PCI_INTX_IRQ_INDEX;
> -	irq_set.start = 0;
> -	irq_set.count = 1;
> +	len = sizeof(struct vfio_irq_set);
> 
> -	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> &irq_set);
> +	/* mask interrupts before disabling */
> +	irq_set = (struct vfio_irq_set *) irq_set_buf;
> +	irq_set->argsz = len;
> +	irq_set->count = 1;
> +	irq_set->flags = VFIO_IRQ_SET_DATA_NONE |
> VFIO_IRQ_SET_ACTION_MASK;
> +	irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
> +	irq_set->start = 0;
> +
> +	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> irq_set);
> 
>  	if (ret) {
>  		RTE_LOG(ERR, EAL, "Error masking INTx interrupts for
> fd %d\n",
>  						intr_handle->fd);
>  		return -1;
>  	}
> +
> +	/* disable INTx*/
> +	memset(irq_set, 0, len);
> +	irq_set->argsz = len;
> +	irq_set->count = 0;
> +	irq_set->flags = VFIO_IRQ_SET_DATA_NONE |
> VFIO_IRQ_SET_ACTION_TRIGGER;
> +	irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
> +	irq_set->start = 0;
> +
> +	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> irq_set);
> +
> +	if (ret) {
> +		RTE_LOG(ERR, EAL,
> +			"Error disabling INTx interrupts for fd %d\n",
> intr_handle->fd);
> +		return -1;
> +	}
>  	return 0;
>  }
> 
> +/* enable MSI interrupts */
> +static int
> +vfio_enable_msi(const struct rte_intr_handle *intr_handle) {
> +	int len, ret;
> +	char irq_set_buf[IRQ_SET_BUF_LEN];
> +	struct vfio_irq_set *irq_set;
> +	int *fd_ptr;
> +
> +	len = sizeof(irq_set_buf);
> +
> +	irq_set = (struct vfio_irq_set *) irq_set_buf;
> +	irq_set->argsz = len;
> +	irq_set->count = 1;
> +	irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
> VFIO_IRQ_SET_ACTION_TRIGGER;
> +	irq_set->index = VFIO_PCI_MSI_IRQ_INDEX;
> +	irq_set->start = 0;
> +	fd_ptr = (int *) &irq_set->data;
> +	*fd_ptr = intr_handle->fd;
> +
> +	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> irq_set);
> +
> +	if (ret) {
> +		RTE_LOG(ERR, EAL, "Error enabling MSI interrupts for
> fd %d\n",
> +						intr_handle->fd);
> +		return -1;
> +	}
> +	return 0;
> +}
> +
> +/* disable MSI interrupts */
> +static int
> +vfio_disable_msi(const struct rte_intr_handle *intr_handle) {
> +	struct vfio_irq_set *irq_set;
> +	char irq_set_buf[IRQ_SET_BUF_LEN];
> +	int len, ret;
> +
> +	len = sizeof(struct vfio_irq_set);
> +
> +	irq_set = (struct vfio_irq_set *) irq_set_buf;
> +	irq_set->argsz = len;
> +	irq_set->count = 0;
> +	irq_set->flags = VFIO_IRQ_SET_DATA_NONE |
> VFIO_IRQ_SET_ACTION_TRIGGER;
> +	irq_set->index = VFIO_PCI_MSI_IRQ_INDEX;
> +	irq_set->start = 0;
> +
> +	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> irq_set);
> +
> +	if (ret)
> +		RTE_LOG(ERR, EAL,
> +			"Error disabling MSI interrupts for fd %d\n",
> intr_handle->fd);
> +
> +	return ret;
> +}
> +
>  /* enable MSI-X interrupts */
>  static int
> -vfio_enable_msix(const struct rte_intr_handle *intr_handle)
> -{
> +vfio_enable_msix(const struct rte_intr_handle *intr_handle) {
> +	int len, ret;
>  	char irq_set_buf[MSIX_IRQ_SET_BUF_LEN];
>  	struct vfio_irq_set *irq_set;
> -	int len, ret;
> -
> -	if (intr_handle->nb_efd == 0)
> -		return 0;
> +	int *fd_ptr;
> 
>  	len = sizeof(irq_set_buf);
> 
>  	irq_set = (struct vfio_irq_set *) irq_set_buf;
>  	irq_set->argsz = len;
> +	/* 0 < irq_set->count < RTE_MAX_RXTX_INTR_VEC_ID + 1 */
> +	irq_set->count = intr_handle->max_intr ?
> +		(intr_handle->max_intr > RTE_MAX_RXTX_INTR_VEC_ID + 1 ?
> +		RTE_MAX_RXTX_INTR_VEC_ID + 1 : intr_handle->max_intr) :
> 1;
>  	irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
> VFIO_IRQ_SET_ACTION_TRIGGER;
>  	irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
> -	irq_set->start = RTE_INTR_VEC_RXTX_OFFSET;
> -	irq_set->count = intr_handle->nb_efd;
> -	memcpy(&irq_set->data, intr_handle->efds,
> -	       sizeof(*intr_handle->efds) * intr_handle->nb_efd);
> +	irq_set->start = 0;
> +	fd_ptr = (int *) &irq_set->data;
> +	/* INTR vector offset 0 reserve for non-efds mapping */
> +	fd_ptr[RTE_INTR_VEC_ZERO_OFFSET] = intr_handle->fd;
> +	memcpy(&fd_ptr[RTE_INTR_VEC_RXTX_OFFSET], intr_handle->efds,
> +		sizeof(*intr_handle->efds) * intr_handle->nb_efd);
> 
>  	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> irq_set);
> +
>  	if (ret) {
>  		RTE_LOG(ERR, EAL, "Error enabling MSI-X interrupts for
> fd %d\n",
>  						intr_handle->fd);
> @@ -189,21 +289,22 @@ vfio_enable_msix(const struct rte_intr_handle
> *intr_handle)
> 
>  /* disable MSI-X interrupts */
>  static int
> -vfio_disable_msix(const struct rte_intr_handle *intr_handle)
> -{
> -	struct vfio_irq_set irq_set;
> -	int ret;
> +vfio_disable_msix(const struct rte_intr_handle *intr_handle) {
> +	struct vfio_irq_set *irq_set;
> +	char irq_set_buf[MSIX_IRQ_SET_BUF_LEN];
> +	int len, ret;
> 
> -	if (intr_handle->nb_efd == 0)
> -		return 0;
> +	len = sizeof(struct vfio_irq_set);
> 
> -	irq_set.argsz = sizeof(irq_set);
> -	irq_set.flags = VFIO_IRQ_SET_DATA_NONE |
> VFIO_IRQ_SET_ACTION_TRIGGER;
> -	irq_set.index = VFIO_PCI_MSIX_IRQ_INDEX;
> -	irq_set.start = RTE_INTR_VEC_RXTX_OFFSET;
> -	irq_set.count = intr_handle->nb_efd;
> +	irq_set = (struct vfio_irq_set *) irq_set_buf;
> +	irq_set->argsz = len;
> +	irq_set->count = 0;
> +	irq_set->flags = VFIO_IRQ_SET_DATA_NONE |
> VFIO_IRQ_SET_ACTION_TRIGGER;
> +	irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
> +	irq_set->start = 0;
> +
> +	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> irq_set);
> 
> -	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS,
> &irq_set);
>  	if (ret)
>  		RTE_LOG(ERR, EAL,
>  			"Error disabling MSI-X interrupts for fd %d\n",
> intr_handle->fd);
> @@ -564,7 +665,9 @@ rte_intr_enable(const struct rte_intr_handle
> *intr_handle)
>  			return -1;
>  		break;
>  	case RTE_INTR_HANDLE_VFIO_MSI:
> -		return 0;
> +		if (vfio_enable_msi(intr_handle))
> +			return -1;
> +		break;
>  	case RTE_INTR_HANDLE_VFIO_LEGACY:
>  		if (vfio_enable_intx(intr_handle))
>  			return -1;
> @@ -618,7 +721,9 @@ rte_intr_disable(const struct rte_intr_handle
> *intr_handle)
>  			return -1;
>  		break;
>  	case RTE_INTR_HANDLE_VFIO_MSI:
> -		return 0;
> +		if (vfio_disable_msi(intr_handle))
> +			return -1;
> +		break;
>  	case RTE_INTR_HANDLE_VFIO_LEGACY:
>  		if (vfio_disable_intx(intr_handle))
>  			return -1;
> --
> 2.8.4


  reply index

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17 11:58 [dpdk-dev] [PATCH 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-17 11:58 ` [dpdk-dev] [PATCH 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-19  9:13   ` Nowak, DamianX
2019-07-17 11:58 ` [dpdk-dev] [PATCH 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-17 11:58 ` [dpdk-dev] [PATCH 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-17 12:47   ` Hyong Youb Kim (hyonkim)
2019-07-17 17:18   ` Shahed Shaikh
2019-07-17 12:43 ` [dpdk-dev] [PATCH v2 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-17 12:43   ` [dpdk-dev] [PATCH v2 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-17 12:43   ` [dpdk-dev] [PATCH v2 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-17 12:57     ` Hyong Youb Kim (hyonkim)
2019-07-17 14:35       ` [dpdk-dev] [EXT] " Nithin Kumar Dabilpuram
2019-07-17 15:05         ` Hyong Youb Kim (hyonkim)
2019-07-17 15:16           ` Nithin Kumar Dabilpuram
2019-07-18 10:22           ` Burakov, Anatoly
2019-07-17 12:43   ` [dpdk-dev] [PATCH v2 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-18  8:46 ` [dpdk-dev] [PATCH v3 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-18  8:46   ` [dpdk-dev] [PATCH v3 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-18  8:46   ` [dpdk-dev] [PATCH v3 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-18 13:13     ` Burakov, Anatoly
2019-07-18 13:27       ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-18 13:30         ` Nithin Kumar Dabilpuram
2019-07-18  8:46   ` [dpdk-dev] [PATCH v3 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-18 14:36 ` [dpdk-dev] [PATCH v4 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-18 14:36   ` [dpdk-dev] [PATCH v4 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-19  8:28     ` Yao, Lei A [this message]
2019-07-22 19:27     ` David Marchand
2019-07-18 14:36   ` [dpdk-dev] [PATCH v4 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-22 19:28     ` David Marchand
2019-07-18 14:36   ` [dpdk-dev] [PATCH v4 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-22 19:29     ` David Marchand
2019-07-22 19:38   ` [dpdk-dev] [PATCH v4 0/3] vfio: fix broken msix interrupt initialization David Marchand
2019-07-23  5:32     ` [dpdk-dev] [EXT] " Nithin Kumar Dabilpuram
2019-07-23  8:04 ` [dpdk-dev] [PATCH v5 " David Marchand
2019-07-23  8:04   ` [dpdk-dev] [PATCH v5 1/3] vfio: revert change that does intr eventfd setup at probe David Marchand
2019-07-23  8:04   ` [dpdk-dev] [PATCH v5 2/3] eal: add ack interrupt API David Marchand
2019-07-23  8:04   ` [dpdk-dev] [PATCH v5 3/3] drivers/net: use ack API in interrupt handlers David Marchand
2019-07-23 10:01   ` [dpdk-dev] [PATCH v5 0/3] vfio: fix broken msix interrupt initialization Thomas Monjalon

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2DBBFF226F7CF64BAFCA79B681719D9549737EB6@shsmsx102.ccr.corp.intel.com \
    --to=lei.a.yao@intel.com \
    --cc=anatoly.burakov@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=hyonkim@cisco.com \
    --cc=jerinj@marvell.com \
    --cc=johndale@cisco.com \
    --cc=ndabilpuram@marvell.com \
    --cc=shshaikh@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org dpdk-dev@archiver.kernel.org
	public-inbox-index dpdk-dev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox