From: "Xing, Beilei" <beilei.xing@intel.com> To: "Zhang, Xiao" <xiao.zhang@intel.com>, "dev@dpdk.org" <dev@dpdk.org> Cc: "Zhang, Qi Z" <qi.z.zhang@intel.com>, "stable@dpdk.org" <stable@dpdk.org> Subject: Re: [dpdk-dev] [v2] net/i40e: fix vf runtime queues rss config Date: Fri, 9 Aug 2019 02:44:26 +0000 Message-ID: <94479800C636CB44BD422CB454846E013CE222D5@SHSMSX101.ccr.corp.intel.com> (raw) In-Reply-To: <1565282473-35661-1-git-send-email-xiao.zhang@intel.com> > -----Original Message----- > From: Zhang, Xiao > Sent: Friday, August 9, 2019 12:41 AM > To: dev@dpdk.org > Cc: Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>; > Zhang, Xiao <xiao.zhang@intel.com>; stable@dpdk.org > Subject: [v2] net/i40e: fix vf runtime queues rss config > > I40evf queue can not work properly with kernel pf driver. Eg. when configure > 8 queues pair, only 4 queues can receive packets, and half packets will be lost > if using 2 queues pair. > This issue is caused by misconfiguration of look up table, use aq command to > setup the lut to make it work properly. > > Fixes: cea7a51c1750 ("i40evf: support RSS") > Cc: stable@dpdk.org > > Signed-off-by: Xiao Zhang <xiao.zhang@intel.com> > --- > v2 change for loop format to avoid build patch issue. > --- > drivers/net/i40e/i40e_ethdev_vf.c | 36 +++++++++++++++++++++++++++++--- > ---- > 1 file changed, 29 insertions(+), 7 deletions(-) > > diff --git a/drivers/net/i40e/i40e_ethdev_vf.c > b/drivers/net/i40e/i40e_ethdev_vf.c > index 308fb98..2d3cf3e 100644 > --- a/drivers/net/i40e/i40e_ethdev_vf.c > +++ b/drivers/net/i40e/i40e_ethdev_vf.c > @@ -2574,6 +2574,26 @@ i40evf_hw_rss_hash_set(struct i40e_vf *vf, struct > rte_eth_rss_conf *rss_conf) > if (ret) > return ret; > > + if (vf->flags & I40E_FLAG_RSS_AQ_CAPABLE) { > + uint8_t *lut; > + uint32_t rss_lut_size = (I40E_VFQF_HLUT1_MAX_INDEX + 1) * > 4; > + uint32_t i; > + lut = rte_zmalloc("i40e_rss_lut", rss_lut_size, 0); > + if (!lut) { > + PMD_DRV_LOG(ERR, "No memory can be allocated"); > + return -ENOMEM; > + } > + > + for (i = 0; i < rss_lut_size; i++) > + lut[i] = i % vf->num_queue_pairs; > + > + ret = i40evf_set_rss_lut(&vf->vsi, lut, > + rss_lut_size); > + rte_free(lut); > + if (ret) > + return ret; > + } > + Why not moving the LUT configuration to the following i40evf_config_rss function? > hena = i40e_config_hena(vf->adapter, rss_conf->rss_hf); > i40e_write_rx_ctl(hw, I40E_VFQF_HENA(0), (uint32_t)hena); > i40e_write_rx_ctl(hw, I40E_VFQF_HENA(1), (uint32_t)(hena >> 32)); > @@ -2607,13 +2627,15 @@ i40evf_config_rss(struct i40e_vf *vf) > } > > num = RTE_MIN(vf->dev_data->nb_rx_queues, > I40E_MAX_QP_NUM_PER_VF); > - /* Fill out the look up table */ > - for (i = 0, j = 0; i < nb_q; i++, j++) { > - if (j >= num) > - j = 0; > - lut = (lut << 8) | j; > - if ((i & 3) == 3) > - I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut); > + if (!(vf->flags & I40E_FLAG_RSS_AQ_CAPABLE)) { > + /* Fill out the look up table */ > + for (i = 0, j = 0; i < nb_q; i++, j++) { > + if (j >= num) > + j = 0; > + lut = (lut << 8) | j; > + if ((i & 3) == 3) > + I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> > 2), lut); > + } > } > > rss_conf = vf->dev_data->dev_conf.rx_adv_conf.rss_conf; > -- > 2.7.4
next prev parent reply index Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-07 0:09 [dpdk-dev] " Xiao Zhang 2019-08-08 16:41 ` [dpdk-dev] [v2] " Xiao Zhang 2019-08-09 2:44 ` Xing, Beilei [this message] 2019-08-09 3:25 ` Zhang, Xiao 2019-08-12 10:29 ` [dpdk-dev] [v3] " Xiao Zhang 2019-08-12 17:43 ` [dpdk-dev] [v4] " Xiao Zhang 2019-08-12 12:07 ` Aaron Conole 2019-08-13 1:43 ` Xing, Beilei 2019-08-13 10:40 ` [dpdk-dev] [v5] " Xiao Zhang 2019-08-13 2:21 ` Xing, Beilei 2019-08-13 6:28 ` Ye Xiaolong 2019-08-13 7:24 ` Zhang, Xiao 2019-08-13 7:37 ` Ye Xiaolong 2019-08-13 7:59 ` Zhang, Xiao 2019-08-13 22:17 ` [dpdk-dev] [v6] " Xiao Zhang 2019-08-13 14:55 ` Ye Xiaolong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=94479800C636CB44BD422CB454846E013CE222D5@SHSMSX101.ccr.corp.intel.com \ --to=beilei.xing@intel.com \ --cc=dev@dpdk.org \ --cc=qi.z.zhang@intel.com \ --cc=stable@dpdk.org \ --cc=xiao.zhang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
DPDK-dev Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \ dev@dpdk.org public-inbox-index dpdk-dev Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.dpdk.dev AGPL code for this site: git clone https://public-inbox.org/public-inbox.git