DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
* [dpdk-dev] Jumbo Frame in pktgen & dpdk-pktgen
@ 2019-11-18 17:25 Nirmal Sarkar
  2019-11-19 17:42 ` Roberts, Lee A.
  0 siblings, 1 reply; 11+ messages in thread
From: Nirmal Sarkar @ 2019-11-18 17:25 UTC (permalink / raw)
  To: dev

Hello,

I'm trying to explore pktgen and dpdk-pktgen with Jumbo frame.

I'm using ubuntu-18.04 system where pktgen is a kernel module and I don't
have any provision to set it for Jumbo frame.
Can you please suggest how to configure Jumbo frame in pktgen ?

In dpdk source code, I've modified RTE_MBUF_DEFAULT_DATAROOM [
*lib/librte_mbuf/rte_mbuf.h*] value with 9K and built.
During testing, I could not send packet size more than 1500 byte.
What is the suggestion to overcome this problem ?

Regards,
N. Sarkar

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-18 17:25 [dpdk-dev] Jumbo Frame in pktgen & dpdk-pktgen Nirmal Sarkar
2019-11-19 17:42 ` Roberts, Lee A.
2019-11-19 20:44   ` Morten Brørup
2019-11-20 12:09     ` Nirmal Sarkar
2019-11-20 18:54       ` Wiles, Keith
2019-11-26  8:21         ` Nirmal Sarkar
2019-11-27 15:12           ` Wiles, Keith
2019-11-27 18:42             ` Nirmal Sarkar
2019-11-30  0:01   ` Wiles, Keith
2019-12-01 19:55     ` Nirmal Sarkar
2019-12-02 12:46       ` Nirmal Sarkar

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git