* [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996
@ 2016-01-21 7:09 Archit Taneja
2016-01-21 7:09 ` [PATCH 01/13] drm/msm/dsi: Create separate Makefile/Kconfig Archit Taneja
` (12 more replies)
0 siblings, 13 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
HDMI on MSM8996 has a tx block that is compatible with the older
versions apart from some minor changes. The HDMI PHY and PLL on msm8996
are new.
The series refactors the code such that there is a separate hdmi phy
driver, similar to what we already have for dsi. This makes it easier
to integrate new PHYs like the one in msm8996.
Archit Taneja (13):
drm/msm/dsi: Create separate Makefile/Kconfig
drm/msm/hdmi: Create separate Makefile/Kconfig
drm/msm/edp: Create separate Makefile/Kconfig
drm/msm/hdmi: Clean up connector gpio usage
drm/msm/hdmi: Fix connector detect when there is no hpd gpio
drm/msm/hdmi: Update generated headers to split PHY/PLL offsets
drm/msm/hdmi: Create a separate hdmi phy driver
drm/msm/hdmi: Make hdmi core get its phy
drm/msm/hdmi: Manage hdmi PLL through phy driver
drm/msm/hdmi: Convert phy files according to new design
drm/msm/hdmi: Update generated headers for hdmi 8996 phy
drm/msm/hdmi: HDMI 8996 PHY/PLL support
dt/bindings: drm/msm/hdmi: Add hdmi phy bindings
.../devicetree/bindings/display/msm/hdmi.txt | 39 +-
drivers/gpu/drm/msm/Kconfig | 42 +-
drivers/gpu/drm/msm/Makefile | 39 +-
drivers/gpu/drm/msm/dsi/Kconfig | 40 ++
drivers/gpu/drm/msm/dsi/Makefile | 13 +
drivers/gpu/drm/msm/edp/Kconfig | 7 +
drivers/gpu/drm/msm/edp/Makefile | 3 +
drivers/gpu/drm/msm/hdmi/Kconfig | 7 +
drivers/gpu/drm/msm/hdmi/Makefile | 6 +
drivers/gpu/drm/msm/hdmi/hdmi.c | 98 ++-
drivers/gpu/drm/msm/hdmi/hdmi.h | 78 ++-
drivers/gpu/drm/msm/hdmi/hdmi.xml.h | 657 +++++++++++++++---
drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 8 +-
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 139 ++--
drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 228 ++++++
drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c | 503 +-------------
drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c | 767 +++++++++++++++++++++
drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c | 196 ++----
drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c | 94 +--
drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 462 +++++++++++++
drivers/gpu/drm/msm/msm_drv.h | 31 +
21 files changed, 2495 insertions(+), 962 deletions(-)
create mode 100644 drivers/gpu/drm/msm/dsi/Kconfig
create mode 100644 drivers/gpu/drm/msm/dsi/Makefile
create mode 100644 drivers/gpu/drm/msm/edp/Kconfig
create mode 100644 drivers/gpu/drm/msm/edp/Makefile
create mode 100644 drivers/gpu/drm/msm/hdmi/Kconfig
create mode 100644 drivers/gpu/drm/msm/hdmi/Makefile
create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_phy.c
create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c
create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 01/13] drm/msm/dsi: Create separate Makefile/Kconfig
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 02/13] drm/msm/hdmi: " Archit Taneja
` (11 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel
The msm Makefile and Kconfig are getting conjusted. Move out
the DSI related stuff into separate Kconfig and Makefile.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/Kconfig | 40 +---------------------------------------
drivers/gpu/drm/msm/Makefile | 22 ++++------------------
drivers/gpu/drm/msm/dsi/Kconfig | 40 ++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/msm/dsi/Makefile | 13 +++++++++++++
4 files changed, 58 insertions(+), 57 deletions(-)
create mode 100644 drivers/gpu/drm/msm/dsi/Kconfig
create mode 100644 drivers/gpu/drm/msm/dsi/Makefile
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 215495c..27d3aed 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -23,42 +23,4 @@ config DRM_MSM_REGISTER_LOGGING
that can be parsed by envytools demsm tool. If enabled, register
logging can be switched on via msm.reglog=y module param.
-config DRM_MSM_DSI
- bool "Enable DSI support in MSM DRM driver"
- depends on DRM_MSM
- select DRM_PANEL
- select DRM_MIPI_DSI
- default y
- help
- Choose this option if you have a need for MIPI DSI connector
- support.
-
-config DRM_MSM_DSI_PLL
- bool "Enable DSI PLL driver in MSM DRM"
- depends on DRM_MSM_DSI && COMMON_CLK
- default y
- help
- Choose this option to enable DSI PLL driver which provides DSI
- source clocks under common clock framework.
-
-config DRM_MSM_DSI_28NM_PHY
- bool "Enable DSI 28nm PHY driver in MSM DRM"
- depends on DRM_MSM_DSI
- default y
- help
- Choose this option if the 28nm DSI PHY is used on the platform.
-
-config DRM_MSM_DSI_20NM_PHY
- bool "Enable DSI 20nm PHY driver in MSM DRM"
- depends on DRM_MSM_DSI
- default y
- help
- Choose this option if the 20nm DSI PHY is used on the platform.
-
-config DRM_MSM_DSI_28NM_8960_PHY
- bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
- depends on DRM_MSM_DSI
- default y
- help
- Choose this option if the 28nm DSI PHY 8960 variant is used on the
- platform.
+source "drivers/gpu/drm/msm/dsi/Kconfig"
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 065ad41..7ac7221 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -1,5 +1,4 @@
ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
-ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
msm-y := \
adreno/adreno_device.o \
@@ -50,25 +49,12 @@ msm-y := \
msm_rd.o \
msm_ringbuffer.o
+msm-$(CONFIG_DRM_MSM_DSI) += mdp/mdp4/mdp4_dsi_encoder.o \
+ mdp/mdp5/mdp5_cmd_encoder.o
+
msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
-msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
- mdp/mdp4/mdp4_dsi_encoder.o \
- dsi/dsi_cfg.o \
- dsi/dsi_host.o \
- dsi/dsi_manager.o \
- dsi/phy/dsi_phy.o \
- mdp/mdp5/mdp5_cmd_encoder.o
-
-msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
-msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
-msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
-
-ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
-msm-y += dsi/pll/dsi_pll.o
-msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
-msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
-endif
+obj-$(CONFIG_DRM_MSM_DSI) += dsi/
obj-$(CONFIG_DRM_MSM) += msm.o
diff --git a/drivers/gpu/drm/msm/dsi/Kconfig b/drivers/gpu/drm/msm/dsi/Kconfig
new file mode 100644
index 0000000..91dcf21
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/Kconfig
@@ -0,0 +1,40 @@
+config DRM_MSM_DSI
+ bool "Enable DSI support in MSM DRM driver"
+ depends on DRM_MSM
+ select DRM_PANEL
+ select DRM_MIPI_DSI
+ default y
+ help
+ Choose this option if you have a need for MIPI DSI connector
+ support.
+
+if DRM_MSM_DSI
+
+config DRM_MSM_DSI_PLL
+ bool "Enable DSI PLL driver in MSM DRM"
+ default y
+ help
+ Choose this option to enable DSI PLL driver which provides DSI
+ source clocks under common clock framework.
+
+config DRM_MSM_DSI_28NM_PHY
+ bool "Enable DSI 28nm PHY driver in MSM DRM"
+ default y
+ help
+ Choose this option if the 28nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_20NM_PHY
+ bool "Enable DSI 20nm PHY driver in MSM DRM"
+ default y
+ help
+ Choose this option if the 20nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_28NM_8960_PHY
+ bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if the 28nm DSI PHY 8960 variant is used on the
+ platform.
+
+endif
diff --git a/drivers/gpu/drm/msm/dsi/Makefile b/drivers/gpu/drm/msm/dsi/Makefile
new file mode 100644
index 0000000..26c8fb6
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/Makefile
@@ -0,0 +1,13 @@
+ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm -Idrivers/gpu/drm/msm/dsi
+
+obj-y := dsi.o dsi_cfg.o dsi_host.o dsi_manager.o phy/dsi_phy.o
+
+obj-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += phy/dsi_phy_28nm.o
+obj-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += phy/dsi_phy_20nm.o
+obj-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += phy/dsi_phy_28nm_8960.o
+
+ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
+obj-y += pll/dsi_pll.o
+obj-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += pll/dsi_pll_28nm.o
+obj-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += pll/dsi_pll_28nm_8960.o
+endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 02/13] drm/msm/hdmi: Create separate Makefile/Kconfig
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
2016-01-21 7:09 ` [PATCH 01/13] drm/msm/dsi: Create separate Makefile/Kconfig Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 03/13] drm/msm/edp: " Archit Taneja
` (10 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel
The msm Makefile and Kconfig are getting conjusted. HDMI is going to
have more configs and files in the future to manage, which will make
managing these harder.
Move hdmi related stuff into separate Kconfig and Makefile.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/Kconfig | 1 +
drivers/gpu/drm/msm/Makefile | 10 +---------
drivers/gpu/drm/msm/hdmi/Kconfig | 7 +++++++
drivers/gpu/drm/msm/hdmi/Makefile | 4 ++++
drivers/gpu/drm/msm/msm_drv.h | 16 ++++++++++++++++
5 files changed, 29 insertions(+), 9 deletions(-)
create mode 100644 drivers/gpu/drm/msm/hdmi/Kconfig
create mode 100644 drivers/gpu/drm/msm/hdmi/Makefile
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 27d3aed..d432380 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -24,3 +24,4 @@ config DRM_MSM_REGISTER_LOGGING
logging can be switched on via msm.reglog=y module param.
source "drivers/gpu/drm/msm/dsi/Kconfig"
+source "drivers/gpu/drm/msm/hdmi/Kconfig"
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 7ac7221..66b7ec4 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -5,15 +5,6 @@ msm-y := \
adreno/adreno_gpu.o \
adreno/a3xx_gpu.o \
adreno/a4xx_gpu.o \
- hdmi/hdmi.o \
- hdmi/hdmi_audio.o \
- hdmi/hdmi_bridge.o \
- hdmi/hdmi_connector.o \
- hdmi/hdmi_hdcp.o \
- hdmi/hdmi_i2c.o \
- hdmi/hdmi_phy_8960.o \
- hdmi/hdmi_phy_8x60.o \
- hdmi/hdmi_phy_8x74.o \
edp/edp.o \
edp/edp_aux.o \
edp/edp_bridge.o \
@@ -56,5 +47,6 @@ msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
obj-$(CONFIG_DRM_MSM_DSI) += dsi/
+obj-$(CONFIG_DRM_MSM_HDMI) += hdmi/
obj-$(CONFIG_DRM_MSM) += msm.o
diff --git a/drivers/gpu/drm/msm/hdmi/Kconfig b/drivers/gpu/drm/msm/hdmi/Kconfig
new file mode 100644
index 0000000..4b24e1e
--- /dev/null
+++ b/drivers/gpu/drm/msm/hdmi/Kconfig
@@ -0,0 +1,7 @@
+config DRM_MSM_HDMI
+ bool "Enable HDMI support in MSM DRM driver"
+ depends on DRM_MSM
+ default y
+ help
+ Choose this option if you have a need for HDMI connector
+ support.
diff --git a/drivers/gpu/drm/msm/hdmi/Makefile b/drivers/gpu/drm/msm/hdmi/Makefile
new file mode 100644
index 0000000..3810388
--- /dev/null
+++ b/drivers/gpu/drm/msm/hdmi/Makefile
@@ -0,0 +1,4 @@
+ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
+
+obj-y := hdmi.o hdmi_audio.o hdmi_bridge.o hdmi_connector.o hdmi_hdcp.o \
+ hdmi_i2c.o hdmi_phy_8960.o hdmi_phy_8x60.o hdmi_phy_8x74.o
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index c1e7bba..ba13ab6 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -242,10 +242,26 @@ struct drm_framebuffer *msm_framebuffer_create(struct drm_device *dev,
struct drm_fb_helper *msm_fbdev_init(struct drm_device *dev);
struct hdmi;
+#ifdef CONFIG_DRM_MSM_HDMI
int hdmi_modeset_init(struct hdmi *hdmi, struct drm_device *dev,
struct drm_encoder *encoder);
void __init hdmi_register(void);
void __exit hdmi_unregister(void);
+#else
+static inline int hdmi_modeset_init(struct hdmi *hdmi, struct drm_device *dev,
+ struct drm_encoder *encoder)
+{
+ return -EINVAL;
+}
+
+static inline void __init hdmi_register(void)
+{
+}
+
+static inline void __exit hdmi_unregister(void)
+{
+}
+#endif
struct msm_edp;
void __init msm_edp_register(void);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 03/13] drm/msm/edp: Create separate Makefile/Kconfig
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
2016-01-21 7:09 ` [PATCH 01/13] drm/msm/dsi: Create separate Makefile/Kconfig Archit Taneja
2016-01-21 7:09 ` [PATCH 02/13] drm/msm/hdmi: " Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 04/13] drm/msm/hdmi: Clean up connector gpio usage Archit Taneja
` (9 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel
The msm Makefile and Kconfig are getting conjusted. Move edp related
stuff into separate Kconfig and Makefile.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/Kconfig | 1 +
drivers/gpu/drm/msm/Makefile | 7 +------
drivers/gpu/drm/msm/edp/Kconfig | 7 +++++++
drivers/gpu/drm/msm/edp/Makefile | 3 +++
drivers/gpu/drm/msm/msm_drv.h | 15 +++++++++++++++
5 files changed, 27 insertions(+), 6 deletions(-)
create mode 100644 drivers/gpu/drm/msm/edp/Kconfig
create mode 100644 drivers/gpu/drm/msm/edp/Makefile
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index d432380..b8beb9b 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -25,3 +25,4 @@ config DRM_MSM_REGISTER_LOGGING
source "drivers/gpu/drm/msm/dsi/Kconfig"
source "drivers/gpu/drm/msm/hdmi/Kconfig"
+source "drivers/gpu/drm/msm/edp/Kconfig"
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 66b7ec4..9386cfe 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -5,12 +5,6 @@ msm-y := \
adreno/adreno_gpu.o \
adreno/a3xx_gpu.o \
adreno/a4xx_gpu.o \
- edp/edp.o \
- edp/edp_aux.o \
- edp/edp_bridge.o \
- edp/edp_connector.o \
- edp/edp_ctrl.o \
- edp/edp_phy.o \
mdp/mdp_format.o \
mdp/mdp_kms.o \
mdp/mdp4/mdp4_crtc.o \
@@ -48,5 +42,6 @@ msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
obj-$(CONFIG_DRM_MSM_DSI) += dsi/
obj-$(CONFIG_DRM_MSM_HDMI) += hdmi/
+obj-$(CONFIG_DRM_MSM_EDP) += edp/
obj-$(CONFIG_DRM_MSM) += msm.o
diff --git a/drivers/gpu/drm/msm/edp/Kconfig b/drivers/gpu/drm/msm/edp/Kconfig
new file mode 100644
index 0000000..576d8c2f
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/Kconfig
@@ -0,0 +1,7 @@
+config DRM_MSM_EDP
+ bool "Enable EDP support in MSM DRM driver"
+ depends on DRM_MSM
+ default y
+ help
+ Choose this option if you have a need for Embedded Display
+ Port encoder support.
diff --git a/drivers/gpu/drm/msm/edp/Makefile b/drivers/gpu/drm/msm/edp/Makefile
new file mode 100644
index 0000000..e623d59
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/Makefile
@@ -0,0 +1,3 @@
+ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
+
+obj-y := edp.o edp_aux.o edp_bridge.o edp_connector.o edp_ctrl.o edp_phy.o
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index ba13ab6..f44a091 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -264,10 +264,25 @@ static inline void __exit hdmi_unregister(void)
#endif
struct msm_edp;
+#ifdef CONFIG_DRM_MSM_EDP
void __init msm_edp_register(void);
void __exit msm_edp_unregister(void);
int msm_edp_modeset_init(struct msm_edp *edp, struct drm_device *dev,
struct drm_encoder *encoder);
+#else
+static inline void __init msm_edp_register(void)
+{
+}
+static inline void __exit msm_edp_unregister(void)
+{
+}
+static inline int msm_edp_modeset_init(struct msm_edp *edp,
+ struct drm_device *dev,
+ struct drm_encoder *encoder)
+{
+ return -EINVAL;
+}
+#endif
struct msm_dsi;
enum msm_dsi_encoder_id {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 04/13] drm/msm/hdmi: Clean up connector gpio usage
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (2 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 03/13] drm/msm/edp: " Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 05/13] drm/msm/hdmi: Fix connector detect when there is no hpd gpio Archit Taneja
` (8 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
Make gpio allocation and usage iterative by parsing the gpios on a given
platform from a list. This gives us flexibility over what all gpios exist
for a platform, whether they are input or output, and what value they
should be set to.
In particular, this will make hdmi on 8x96 platforms easier to integrate
with the driver, as it doesn't have a hpd gpio input to them. Also, it
cleans things up a bit.
We still use the legacy gpio api here, as we might need to backport this
driver to downstream kernels.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 31 +++++--
drivers/gpu/drm/msm/hdmi/hdmi.h | 11 ++-
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 130 +++++++++---------------------
3 files changed, 69 insertions(+), 103 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 9a0989c..68cc3cd 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -388,7 +388,21 @@ static struct hdmi_platform_config hdmi_tx_8996_config = {
.hpd_freq = hpd_clk_freq_8x74,
};
-static int get_gpio(struct device *dev, struct device_node *of_node, const char *name)
+static const struct {
+ const char *name;
+ const bool output;
+ const int value;
+ const char *label;
+} hdmi_gpio_pdata[] = {
+ { "qcom,hdmi-tx-ddc-clk", true, 1, "HDMI_DDC_CLK" },
+ { "qcom,hdmi-tx-ddc-data", true, 1, "HDMI_DDC_DATA" },
+ { "qcom,hdmi-tx-hpd", false, 1, "HDMI_HPD" },
+ { "qcom,hdmi-tx-mux-en", true, 1, "HDMI_MUX_EN" },
+ { "qcom,hdmi-tx-mux-sel", true, 0, "HDMI_MUX_SEL" },
+ { "qcom,hdmi-tx-mux-lpm", true, 1, "HDMI_MUX_LPM" },
+};
+
+static int get_gpio(struct device_node *of_node, const char *name)
{
int gpio = of_get_named_gpio(of_node, name, 0);
if (gpio < 0) {
@@ -410,6 +424,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
static struct hdmi_platform_config *hdmi_cfg;
struct hdmi *hdmi;
struct device_node *of_node = dev->of_node;
+ int i;
hdmi_cfg = (struct hdmi_platform_config *)
of_device_get_match_data(dev);
@@ -420,12 +435,14 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
hdmi_cfg->mmio_name = "core_physical";
hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
- hdmi_cfg->ddc_clk_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-ddc-clk");
- hdmi_cfg->ddc_data_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-ddc-data");
- hdmi_cfg->hpd_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-hpd");
- hdmi_cfg->mux_en_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-en");
- hdmi_cfg->mux_sel_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-sel");
- hdmi_cfg->mux_lpm_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-lpm");
+
+ for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
+ hdmi_cfg->gpios[i].num = get_gpio(of_node,
+ hdmi_gpio_pdata[i].name);
+ hdmi_cfg->gpios[i].output = hdmi_gpio_pdata[i].output;
+ hdmi_cfg->gpios[i].value = hdmi_gpio_pdata[i].value;
+ hdmi_cfg->gpios[i].label = hdmi_gpio_pdata[i].label;
+ }
dev->platform_data = hdmi_cfg;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index d0e6631..d715332 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -27,10 +27,18 @@
#include "msm_drv.h"
#include "hdmi.xml.h"
+#define HDMI_MAX_NUM_GPIO 6
struct hdmi_phy;
struct hdmi_platform_config;
+struct hdmi_gpio_data {
+ int num;
+ bool output;
+ int value;
+ const char *label;
+};
+
struct hdmi_audio {
bool enabled;
struct hdmi_audio_infoframe infoframe;
@@ -110,8 +118,7 @@ struct hdmi_platform_config {
int pwr_clk_cnt;
/* gpio's: */
- int ddc_clk_gpio, ddc_data_gpio, hpd_gpio, mux_en_gpio, mux_sel_gpio;
- int mux_lpm_gpio;
+ struct hdmi_gpio_data gpios[HDMI_MAX_NUM_GPIO];
};
void hdmi_set_mode(struct hdmi *hdmi, bool power_on);
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index a3b05ae..9d17310f 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -81,114 +81,53 @@ static int gpio_config(struct hdmi *hdmi, bool on)
{
struct device *dev = &hdmi->pdev->dev;
const struct hdmi_platform_config *config = hdmi->config;
- int ret;
+ int ret, i;
if (on) {
- if (config->ddc_clk_gpio != -1) {
- ret = gpio_request(config->ddc_clk_gpio, "HDMI_DDC_CLK");
- if (ret) {
- dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
- "HDMI_DDC_CLK", config->ddc_clk_gpio, ret);
- goto error1;
- }
- gpio_set_value_cansleep(config->ddc_clk_gpio, 1);
- }
-
- if (config->ddc_data_gpio != -1) {
- ret = gpio_request(config->ddc_data_gpio, "HDMI_DDC_DATA");
- if (ret) {
- dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
- "HDMI_DDC_DATA", config->ddc_data_gpio, ret);
- goto error2;
+ for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
+ struct hdmi_gpio_data gpio = config->gpios[i];
+
+ if (gpio.num != -1) {
+ ret = gpio_request(gpio.num, gpio.label);
+ if (ret) {
+ dev_err(dev,
+ "'%s'(%d) gpio_request failed: %d\n",
+ gpio.label, gpio.num, ret);
+ goto err;
+ }
+
+ if (gpio.output) {
+ gpio_direction_output(gpio.num,
+ gpio.value);
+ } else {
+ gpio_direction_input(gpio.num);
+ gpio_set_value_cansleep(gpio.num,
+ gpio.value);
+ }
}
- gpio_set_value_cansleep(config->ddc_data_gpio, 1);
}
- ret = gpio_request(config->hpd_gpio, "HDMI_HPD");
- if (ret) {
- dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
- "HDMI_HPD", config->hpd_gpio, ret);
- goto error3;
- }
- gpio_direction_input(config->hpd_gpio);
- gpio_set_value_cansleep(config->hpd_gpio, 1);
-
- if (config->mux_en_gpio != -1) {
- ret = gpio_request(config->mux_en_gpio, "HDMI_MUX_EN");
- if (ret) {
- dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
- "HDMI_MUX_EN", config->mux_en_gpio, ret);
- goto error4;
- }
- gpio_set_value_cansleep(config->mux_en_gpio, 1);
- }
-
- if (config->mux_sel_gpio != -1) {
- ret = gpio_request(config->mux_sel_gpio, "HDMI_MUX_SEL");
- if (ret) {
- dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
- "HDMI_MUX_SEL", config->mux_sel_gpio, ret);
- goto error5;
- }
- gpio_set_value_cansleep(config->mux_sel_gpio, 0);
- }
-
- if (config->mux_lpm_gpio != -1) {
- ret = gpio_request(config->mux_lpm_gpio,
- "HDMI_MUX_LPM");
- if (ret) {
- dev_err(dev,
- "'%s'(%d) gpio_request failed: %d\n",
- "HDMI_MUX_LPM",
- config->mux_lpm_gpio, ret);
- goto error6;
- }
- gpio_set_value_cansleep(config->mux_lpm_gpio, 1);
- }
DBG("gpio on");
} else {
- if (config->ddc_clk_gpio != -1)
- gpio_free(config->ddc_clk_gpio);
-
- if (config->ddc_data_gpio != -1)
- gpio_free(config->ddc_data_gpio);
-
- gpio_free(config->hpd_gpio);
+ for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
+ struct hdmi_gpio_data gpio = config->gpios[i];
- if (config->mux_en_gpio != -1) {
- gpio_set_value_cansleep(config->mux_en_gpio, 0);
- gpio_free(config->mux_en_gpio);
- }
+ if (gpio.output) {
+ int value = gpio.value ? 0 : 1;
+ gpio_set_value_cansleep(gpio.num, value);
+ }
- if (config->mux_sel_gpio != -1) {
- gpio_set_value_cansleep(config->mux_sel_gpio, 1);
- gpio_free(config->mux_sel_gpio);
- }
+ gpio_free(gpio.num);
+ };
- if (config->mux_lpm_gpio != -1) {
- gpio_set_value_cansleep(config->mux_lpm_gpio, 0);
- gpio_free(config->mux_lpm_gpio);
- }
DBG("gpio off");
}
return 0;
+err:
+ while (i--)
+ gpio_free(config->gpios[i].num);
-error6:
- if (config->mux_sel_gpio != -1)
- gpio_free(config->mux_sel_gpio);
-error5:
- if (config->mux_en_gpio != -1)
- gpio_free(config->mux_en_gpio);
-error4:
- gpio_free(config->hpd_gpio);
-error3:
- if (config->ddc_data_gpio != -1)
- gpio_free(config->ddc_data_gpio);
-error2:
- if (config->ddc_clk_gpio != -1)
- gpio_free(config->ddc_clk_gpio);
-error1:
return ret;
}
@@ -345,10 +284,13 @@ static enum drm_connector_status detect_reg(struct hdmi *hdmi)
connector_status_connected : connector_status_disconnected;
}
+#define HPD_GPIO_INDEX 2
static enum drm_connector_status detect_gpio(struct hdmi *hdmi)
{
const struct hdmi_platform_config *config = hdmi->config;
- return gpio_get_value(config->hpd_gpio) ?
+ struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
+
+ return gpio_get_value(hpd_gpio.num) ?
connector_status_connected :
connector_status_disconnected;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 05/13] drm/msm/hdmi: Fix connector detect when there is no hpd gpio
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (3 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 04/13] drm/msm/hdmi: Clean up connector gpio usage Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 06/13] drm/msm/hdmi: Update generated headers to split PHY/PLL offsets Archit Taneja
` (7 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
Some platforms may not have a hpd gpio line to detect hpd. They need to
rely only on reading REG_HDMI_HPD_INT_STATUS for hpd.
Modify hdmi_connector_detect logic such that it checks for hpd only using
the status register if there is no hpd gpio.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index 9d17310f..d2e818e2 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -300,9 +300,18 @@ static enum drm_connector_status hdmi_connector_detect(
{
struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
struct hdmi *hdmi = hdmi_connector->hdmi;
+ const struct hdmi_platform_config *config = hdmi->config;
+ struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
enum drm_connector_status stat_gpio, stat_reg;
int retry = 20;
+ /*
+ * some platforms may not have hpd gpio. Rely only on the status
+ * provided by REG_HDMI_HPD_INT_STATUS in this case.
+ */
+ if (hpd_gpio.num == -1)
+ return detect_reg(hdmi);
+
do {
stat_gpio = detect_gpio(hdmi);
stat_reg = detect_reg(hdmi);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 06/13] drm/msm/hdmi: Update generated headers to split PHY/PLL offsets
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (4 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 05/13] drm/msm/hdmi: Fix connector detect when there is no hpd gpio Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 07/13] drm/msm/hdmi: Create a separate hdmi phy driver Archit Taneja
` (6 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
- Create separate domains for 8960 PHY and PLL
- Create separate domains for 8x60 PHY
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.xml.h | 157 +++++++++++++++++-------------------
1 file changed, 74 insertions(+), 83 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.xml.h b/drivers/gpu/drm/msm/hdmi/hdmi.xml.h
index 10c4570..a542549 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.xml.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.xml.h
@@ -8,17 +8,8 @@ http://github.com/freedreno/envytools/
git clone https://github.com/freedreno/envytools.git
The rules-ng-ng source files this header was generated from are:
-- /home/robclark/src/freedreno/envytools/rnndb/msm.xml ( 676 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml ( 20915 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml ( 2849 bytes, from 2015-09-18 12:07:28)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml ( 37194 bytes, from 2015-09-18 12:07:28)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml ( 27887 bytes, from 2015-10-22 16:34:52)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml ( 602 bytes, from 2015-10-22 16:35:02)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml ( 1686 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml ( 600 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml ( 29154 bytes, from 2015-08-10 21:25:43)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml ( 10416 bytes, from 2015-05-20 20:03:14)
+- /local/mnt/workspace/source_trees/envytools/rnndb/../rnndb/hdmi/hdmi.xml ( 28770 bytes, from 2015-11-03 11:09:10)
+- /local/mnt/workspace/source_trees/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2015-02-09 03:18:10)
Copyright (C) 2013-2015 by the following authors:
- Rob Clark <robdclark@gmail.com> (robclark)
@@ -559,7 +550,7 @@ static inline uint32_t HDMI_VSYNC_TOTAL_F2_V_TOTAL(uint32_t val)
#define REG_HDMI_CEC_WR_CHECK_CONFIG 0x00000370
-#define REG_HDMI_8x60_PHY_REG0 0x00000300
+#define REG_HDMI_8x60_PHY_REG0 0x00000000
#define HDMI_8x60_PHY_REG0_DESER_DEL_CTRL__MASK 0x0000001c
#define HDMI_8x60_PHY_REG0_DESER_DEL_CTRL__SHIFT 2
static inline uint32_t HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(uint32_t val)
@@ -567,7 +558,7 @@ static inline uint32_t HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(uint32_t val)
return ((val) << HDMI_8x60_PHY_REG0_DESER_DEL_CTRL__SHIFT) & HDMI_8x60_PHY_REG0_DESER_DEL_CTRL__MASK;
}
-#define REG_HDMI_8x60_PHY_REG1 0x00000304
+#define REG_HDMI_8x60_PHY_REG1 0x00000004
#define HDMI_8x60_PHY_REG1_DTEST_MUX_SEL__MASK 0x000000f0
#define HDMI_8x60_PHY_REG1_DTEST_MUX_SEL__SHIFT 4
static inline uint32_t HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(uint32_t val)
@@ -581,7 +572,7 @@ static inline uint32_t HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(uint32_t val)
return ((val) << HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL__SHIFT) & HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL__MASK;
}
-#define REG_HDMI_8x60_PHY_REG2 0x00000308
+#define REG_HDMI_8x60_PHY_REG2 0x00000008
#define HDMI_8x60_PHY_REG2_PD_DESER 0x00000001
#define HDMI_8x60_PHY_REG2_PD_DRIVE_1 0x00000002
#define HDMI_8x60_PHY_REG2_PD_DRIVE_2 0x00000004
@@ -591,152 +582,152 @@ static inline uint32_t HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(uint32_t val)
#define HDMI_8x60_PHY_REG2_PD_PWRGEN 0x00000040
#define HDMI_8x60_PHY_REG2_RCV_SENSE_EN 0x00000080
-#define REG_HDMI_8x60_PHY_REG3 0x0000030c
+#define REG_HDMI_8x60_PHY_REG3 0x0000000c
#define HDMI_8x60_PHY_REG3_PLL_ENABLE 0x00000001
-#define REG_HDMI_8x60_PHY_REG4 0x00000310
+#define REG_HDMI_8x60_PHY_REG4 0x00000010
-#define REG_HDMI_8x60_PHY_REG5 0x00000314
+#define REG_HDMI_8x60_PHY_REG5 0x00000014
-#define REG_HDMI_8x60_PHY_REG6 0x00000318
+#define REG_HDMI_8x60_PHY_REG6 0x00000018
-#define REG_HDMI_8x60_PHY_REG7 0x0000031c
+#define REG_HDMI_8x60_PHY_REG7 0x0000001c
-#define REG_HDMI_8x60_PHY_REG8 0x00000320
+#define REG_HDMI_8x60_PHY_REG8 0x00000020
-#define REG_HDMI_8x60_PHY_REG9 0x00000324
+#define REG_HDMI_8x60_PHY_REG9 0x00000024
-#define REG_HDMI_8x60_PHY_REG10 0x00000328
+#define REG_HDMI_8x60_PHY_REG10 0x00000028
-#define REG_HDMI_8x60_PHY_REG11 0x0000032c
+#define REG_HDMI_8x60_PHY_REG11 0x0000002c
-#define REG_HDMI_8x60_PHY_REG12 0x00000330
+#define REG_HDMI_8x60_PHY_REG12 0x00000030
#define HDMI_8x60_PHY_REG12_RETIMING_EN 0x00000001
#define HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN 0x00000002
#define HDMI_8x60_PHY_REG12_FORCE_LOCK 0x00000010
-#define REG_HDMI_8960_PHY_REG0 0x00000400
+#define REG_HDMI_8960_PHY_REG0 0x00000000
-#define REG_HDMI_8960_PHY_REG1 0x00000404
+#define REG_HDMI_8960_PHY_REG1 0x00000004
-#define REG_HDMI_8960_PHY_REG2 0x00000408
+#define REG_HDMI_8960_PHY_REG2 0x00000008
-#define REG_HDMI_8960_PHY_REG3 0x0000040c
+#define REG_HDMI_8960_PHY_REG3 0x0000000c
-#define REG_HDMI_8960_PHY_REG4 0x00000410
+#define REG_HDMI_8960_PHY_REG4 0x00000010
-#define REG_HDMI_8960_PHY_REG5 0x00000414
+#define REG_HDMI_8960_PHY_REG5 0x00000014
-#define REG_HDMI_8960_PHY_REG6 0x00000418
+#define REG_HDMI_8960_PHY_REG6 0x00000018
-#define REG_HDMI_8960_PHY_REG7 0x0000041c
+#define REG_HDMI_8960_PHY_REG7 0x0000001c
-#define REG_HDMI_8960_PHY_REG8 0x00000420
+#define REG_HDMI_8960_PHY_REG8 0x00000020
-#define REG_HDMI_8960_PHY_REG9 0x00000424
+#define REG_HDMI_8960_PHY_REG9 0x00000024
-#define REG_HDMI_8960_PHY_REG10 0x00000428
+#define REG_HDMI_8960_PHY_REG10 0x00000028
-#define REG_HDMI_8960_PHY_REG11 0x0000042c
+#define REG_HDMI_8960_PHY_REG11 0x0000002c
-#define REG_HDMI_8960_PHY_REG12 0x00000430
+#define REG_HDMI_8960_PHY_REG12 0x00000030
#define HDMI_8960_PHY_REG12_SW_RESET 0x00000020
#define HDMI_8960_PHY_REG12_PWRDN_B 0x00000080
-#define REG_HDMI_8960_PHY_REG_BIST_CFG 0x00000434
+#define REG_HDMI_8960_PHY_REG_BIST_CFG 0x00000034
-#define REG_HDMI_8960_PHY_DEBUG_BUS_SEL 0x00000438
+#define REG_HDMI_8960_PHY_DEBUG_BUS_SEL 0x00000038
-#define REG_HDMI_8960_PHY_REG_MISC0 0x0000043c
+#define REG_HDMI_8960_PHY_REG_MISC0 0x0000003c
-#define REG_HDMI_8960_PHY_REG13 0x00000440
+#define REG_HDMI_8960_PHY_REG13 0x00000040
-#define REG_HDMI_8960_PHY_REG14 0x00000444
+#define REG_HDMI_8960_PHY_REG14 0x00000044
-#define REG_HDMI_8960_PHY_REG15 0x00000448
+#define REG_HDMI_8960_PHY_REG15 0x00000048
-#define REG_HDMI_8960_PHY_PLL_REFCLK_CFG 0x00000500
+#define REG_HDMI_8960_PHY_PLL_REFCLK_CFG 0x00000000
-#define REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG 0x00000504
+#define REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG 0x00000004
-#define REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 0x00000508
+#define REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 0x00000008
-#define REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 0x0000050c
+#define REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 0x0000000c
-#define REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG 0x00000510
+#define REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG 0x00000010
-#define REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG 0x00000514
+#define REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG 0x00000014
-#define REG_HDMI_8960_PHY_PLL_PWRDN_B 0x00000518
+#define REG_HDMI_8960_PHY_PLL_PWRDN_B 0x00000018
#define HDMI_8960_PHY_PLL_PWRDN_B_PD_PLL 0x00000002
#define HDMI_8960_PHY_PLL_PWRDN_B_PLL_PWRDN_B 0x00000008
-#define REG_HDMI_8960_PHY_PLL_SDM_CFG0 0x0000051c
+#define REG_HDMI_8960_PHY_PLL_SDM_CFG0 0x0000001c
-#define REG_HDMI_8960_PHY_PLL_SDM_CFG1 0x00000520
+#define REG_HDMI_8960_PHY_PLL_SDM_CFG1 0x00000020
-#define REG_HDMI_8960_PHY_PLL_SDM_CFG2 0x00000524
+#define REG_HDMI_8960_PHY_PLL_SDM_CFG2 0x00000024
-#define REG_HDMI_8960_PHY_PLL_SDM_CFG3 0x00000528
+#define REG_HDMI_8960_PHY_PLL_SDM_CFG3 0x00000028
-#define REG_HDMI_8960_PHY_PLL_SDM_CFG4 0x0000052c
+#define REG_HDMI_8960_PHY_PLL_SDM_CFG4 0x0000002c
-#define REG_HDMI_8960_PHY_PLL_SSC_CFG0 0x00000530
+#define REG_HDMI_8960_PHY_PLL_SSC_CFG0 0x00000030
-#define REG_HDMI_8960_PHY_PLL_SSC_CFG1 0x00000534
+#define REG_HDMI_8960_PHY_PLL_SSC_CFG1 0x00000034
-#define REG_HDMI_8960_PHY_PLL_SSC_CFG2 0x00000538
+#define REG_HDMI_8960_PHY_PLL_SSC_CFG2 0x00000038
-#define REG_HDMI_8960_PHY_PLL_SSC_CFG3 0x0000053c
+#define REG_HDMI_8960_PHY_PLL_SSC_CFG3 0x0000003c
-#define REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 0x00000540
+#define REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 0x00000040
-#define REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 0x00000544
+#define REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 0x00000044
-#define REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 0x00000548
+#define REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 0x00000048
-#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 0x0000054c
+#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 0x0000004c
-#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 0x00000550
+#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 0x00000050
-#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 0x00000554
+#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 0x00000054
-#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 0x00000558
+#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 0x00000058
-#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 0x0000055c
+#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 0x0000005c
-#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 0x00000560
+#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 0x00000060
-#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 0x00000564
+#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 0x00000064
-#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 0x00000568
+#define REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 0x00000068
-#define REG_HDMI_8960_PHY_PLL_DEBUG_SEL 0x0000056c
+#define REG_HDMI_8960_PHY_PLL_DEBUG_SEL 0x0000006c
-#define REG_HDMI_8960_PHY_PLL_MISC0 0x00000570
+#define REG_HDMI_8960_PHY_PLL_MISC0 0x00000070
-#define REG_HDMI_8960_PHY_PLL_MISC1 0x00000574
+#define REG_HDMI_8960_PHY_PLL_MISC1 0x00000074
-#define REG_HDMI_8960_PHY_PLL_MISC2 0x00000578
+#define REG_HDMI_8960_PHY_PLL_MISC2 0x00000078
-#define REG_HDMI_8960_PHY_PLL_MISC3 0x0000057c
+#define REG_HDMI_8960_PHY_PLL_MISC3 0x0000007c
-#define REG_HDMI_8960_PHY_PLL_MISC4 0x00000580
+#define REG_HDMI_8960_PHY_PLL_MISC4 0x00000080
-#define REG_HDMI_8960_PHY_PLL_MISC5 0x00000584
+#define REG_HDMI_8960_PHY_PLL_MISC5 0x00000084
-#define REG_HDMI_8960_PHY_PLL_MISC6 0x00000588
+#define REG_HDMI_8960_PHY_PLL_MISC6 0x00000088
-#define REG_HDMI_8960_PHY_PLL_DEBUG_BUS0 0x0000058c
+#define REG_HDMI_8960_PHY_PLL_DEBUG_BUS0 0x0000008c
-#define REG_HDMI_8960_PHY_PLL_DEBUG_BUS1 0x00000590
+#define REG_HDMI_8960_PHY_PLL_DEBUG_BUS1 0x00000090
-#define REG_HDMI_8960_PHY_PLL_DEBUG_BUS2 0x00000594
+#define REG_HDMI_8960_PHY_PLL_DEBUG_BUS2 0x00000094
-#define REG_HDMI_8960_PHY_PLL_STATUS0 0x00000598
+#define REG_HDMI_8960_PHY_PLL_STATUS0 0x00000098
#define HDMI_8960_PHY_PLL_STATUS0_PLL_LOCK 0x00000001
-#define REG_HDMI_8960_PHY_PLL_STATUS1 0x0000059c
+#define REG_HDMI_8960_PHY_PLL_STATUS1 0x0000009c
#define REG_HDMI_8x74_ANA_CFG0 0x00000000
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 07/13] drm/msm/hdmi: Create a separate hdmi phy driver
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (5 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 06/13] drm/msm/hdmi: Update generated headers to split PHY/PLL offsets Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 08/13] drm/msm/hdmi: Make hdmi core get its phy Archit Taneja
` (5 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
Create a phy device that represents the TX PHY and PLL parts of the hdmi
block.
This makes management of PHY specific resources (regulators and clocks)
much easier, and makes the PHY and PLL usable independently. It also
simplifies the core hdmi driver, which currently assigns phy ops among
with many other things.
The phy driver implementation done here is very similar to the phy driver
we already have for DSI.
Keep the old hdmi_phy_funcs ops for now. These will be removed later.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/Makefile | 4 +-
drivers/gpu/drm/msm/hdmi/hdmi.c | 2 +
drivers/gpu/drm/msm/hdmi/hdmi.h | 48 +++++++-
drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 188 +++++++++++++++++++++++++++++++
drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c | 18 +++
drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c | 6 +
drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c | 20 ++++
7 files changed, 280 insertions(+), 6 deletions(-)
create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_phy.c
diff --git a/drivers/gpu/drm/msm/hdmi/Makefile b/drivers/gpu/drm/msm/hdmi/Makefile
index 3810388..aeb9329 100644
--- a/drivers/gpu/drm/msm/hdmi/Makefile
+++ b/drivers/gpu/drm/msm/hdmi/Makefile
@@ -1,4 +1,4 @@
ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
-obj-y := hdmi.o hdmi_audio.o hdmi_bridge.o hdmi_connector.o hdmi_hdcp.o \
- hdmi_i2c.o hdmi_phy_8960.o hdmi_phy_8x60.o hdmi_phy_8x74.o
+obj-y := hdmi.o hdmi_phy.o hdmi_audio.o hdmi_bridge.o hdmi_connector.o \
+ hdmi_hdcp.o hdmi_i2c.o hdmi_phy_8960.o hdmi_phy_8x60.o hdmi_phy_8x74.o
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 68cc3cd..0fe5411 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -502,10 +502,12 @@ static struct platform_driver hdmi_driver = {
void __init hdmi_register(void)
{
+ hdmi_phy_driver_register();
platform_driver_register(&hdmi_driver);
}
void __exit hdmi_unregister(void)
{
platform_driver_unregister(&hdmi_driver);
+ hdmi_phy_driver_unregister();
}
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index d715332..3404235 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -139,25 +139,65 @@ static inline u32 hdmi_qfprom_read(struct hdmi *hdmi, u32 reg)
}
/*
- * The phy appears to be different, for example between 8960 and 8x60,
- * so split the phy related functions out and load the correct one at
- * runtime:
+ * hdmi phy:
*/
-
struct hdmi_phy_funcs {
void (*destroy)(struct hdmi_phy *phy);
void (*powerup)(struct hdmi_phy *phy, unsigned long int pixclock);
void (*powerdown)(struct hdmi_phy *phy);
};
+enum hdmi_phy_type {
+ MSM_HDMI_PHY_8x60,
+ MSM_HDMI_PHY_8960,
+ MSM_HDMI_PHY_8x74,
+ MSM_HDMI_PHY_MAX,
+};
+
+struct hdmi_phy_cfg {
+ enum hdmi_phy_type type;
+ void (*powerup)(struct hdmi_phy *phy, unsigned long int pixclock);
+ void (*powerdown)(struct hdmi_phy *phy);
+ const char * const *reg_names;
+ int num_regs;
+ const char * const *clk_names;
+ int num_clks;
+};
+
+extern const struct hdmi_phy_cfg hdmi_phy_8x60_cfg;
+extern const struct hdmi_phy_cfg hdmi_phy_8960_cfg;
+extern const struct hdmi_phy_cfg hdmi_phy_8x74_cfg;
+
struct hdmi_phy {
+ struct platform_device *pdev;
+ void __iomem *mmio;
+ struct hdmi_phy_cfg *cfg;
const struct hdmi_phy_funcs *funcs;
+ struct regulator **regs;
+ struct clk **clks;
};
struct hdmi_phy *hdmi_phy_8960_init(struct hdmi *hdmi);
struct hdmi_phy *hdmi_phy_8x60_init(struct hdmi *hdmi);
struct hdmi_phy *hdmi_phy_8x74_init(struct hdmi *hdmi);
+static inline void hdmi_phy_write(struct hdmi_phy *phy, u32 reg, u32 data)
+{
+ msm_writel(data, phy->mmio + reg);
+}
+
+static inline u32 hdmi_phy_read(struct hdmi_phy *phy, u32 reg)
+{
+ return msm_readl(phy->mmio + reg);
+}
+
+int hdmi_phy_resource_enable(struct hdmi_phy *phy);
+void hdmi_phy_resource_disable(struct hdmi_phy *phy);
+void hdmi_phy_powerup(struct hdmi_phy *phy, unsigned long int pixclock);
+void hdmi_phy_powerdown(struct hdmi_phy *phy);
+void __init hdmi_phy_driver_register(void);
+void __exit hdmi_phy_driver_unregister(void);
+
/*
* audio:
*/
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
new file mode 100644
index 0000000..184a061
--- /dev/null
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_device.h>
+
+#include "hdmi.h"
+
+static int hdmi_phy_resource_init(struct hdmi_phy *phy)
+{
+ struct hdmi_phy_cfg *cfg = phy->cfg;
+ struct device *dev = &phy->pdev->dev;
+ int i, ret;
+
+ phy->regs = devm_kzalloc(dev, sizeof(phy->regs[0]) * cfg->num_regs,
+ GFP_KERNEL);
+ if (!phy->regs)
+ return -ENOMEM;
+
+ phy->clks = devm_kzalloc(dev, sizeof(phy->clks[0]) * cfg->num_clks,
+ GFP_KERNEL);
+ if (!phy->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < cfg->num_regs; i++) {
+ struct regulator *reg;
+
+ reg = devm_regulator_get(dev, cfg->reg_names[i]);
+ if (IS_ERR(reg)) {
+ ret = PTR_ERR(reg);
+ dev_err(dev, "failed to get phy regulator: %s (%d)\n",
+ cfg->reg_names[i], ret);
+ return ret;
+ }
+
+ phy->regs[i] = reg;
+ }
+
+ for (i = 0; i < cfg->num_clks; i++) {
+ struct clk *clk;
+
+ clk = devm_clk_get(dev, cfg->clk_names[i]);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_err(dev, "failed to get phy clock: %s (%d)\n",
+ cfg->clk_names[i], ret);
+ return ret;
+ }
+
+ phy->clks[i] = clk;
+ }
+
+ return 0;
+}
+
+int hdmi_phy_resource_enable(struct hdmi_phy *phy)
+{
+ struct hdmi_phy_cfg *cfg = phy->cfg;
+ struct device *dev = &phy->pdev->dev;
+ int i, ret = 0;
+
+ pm_runtime_get_sync(dev);
+
+ for (i = 0; i < cfg->num_regs; i++) {
+ ret = regulator_enable(phy->regs[i]);
+ if (ret)
+ dev_err(dev, "failed to enable regulator: %s (%d)\n",
+ cfg->reg_names[i], ret);
+ }
+
+ for (i = 0; i < cfg->num_clks; i++) {
+ ret = clk_prepare_enable(phy->clks[i]);
+ if (ret)
+ dev_err(dev, "failed to enable clock: %s (%d)\n",
+ cfg->clk_names[i], ret);
+ }
+
+ return ret;
+}
+
+void hdmi_phy_resource_disable(struct hdmi_phy *phy)
+{
+ struct hdmi_phy_cfg *cfg = phy->cfg;
+ struct device *dev = &phy->pdev->dev;
+ int i;
+
+ for (i = cfg->num_clks - 1; i >= 0; i--)
+ clk_disable_unprepare(phy->clks[i]);
+
+ for (i = cfg->num_regs - 1; i >= 0; i--)
+ regulator_disable(phy->regs[i]);
+
+ pm_runtime_put_sync(dev);
+}
+
+void hdmi_phy_powerup(struct hdmi_phy *phy, unsigned long int pixclock)
+{
+ if (!phy || !phy->cfg->powerup)
+ return;
+
+ phy->cfg->powerup(phy, pixclock);
+}
+
+void hdmi_phy_powerdown(struct hdmi_phy *phy)
+{
+ if (!phy || !phy->cfg->powerdown)
+ return;
+
+ phy->cfg->powerdown(phy);
+}
+
+static int hdmi_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct hdmi_phy *phy;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENODEV;
+
+ phy->cfg = (struct hdmi_phy_cfg *)of_device_get_match_data(dev);
+ if (!phy->cfg)
+ return -ENODEV;
+
+ phy->mmio = msm_ioremap(pdev, "hdmi_phy", "HDMI_PHY");
+ if (IS_ERR(phy->mmio)) {
+ dev_err(dev, "%s: failed to map phy base\n", __func__);
+ return -ENOMEM;
+ }
+
+ phy->pdev = pdev;
+
+ ret = hdmi_phy_resource_init(phy);
+ if (ret)
+ return ret;
+
+ pm_runtime_enable(&pdev->dev);
+
+ platform_set_drvdata(pdev, phy);
+
+ return 0;
+}
+
+static int hdmi_phy_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id hdmi_phy_dt_match[] = {
+ { .compatible = "qcom,hdmi-phy-8x60",
+ .data = &hdmi_phy_8x60_cfg },
+ { .compatible = "qcom,hdmi-phy-8960",
+ .data = &hdmi_phy_8960_cfg },
+ { .compatible = "qcom,hdmi-phy-8x74",
+ .data = &hdmi_phy_8x74_cfg },
+ {}
+};
+
+static struct platform_driver hdmi_phy_platform_driver = {
+ .probe = hdmi_phy_probe,
+ .remove = hdmi_phy_remove,
+ .driver = {
+ .name = "msm_hdmi_phy",
+ .of_match_table = hdmi_phy_dt_match,
+ },
+};
+
+void __init hdmi_phy_driver_register(void)
+{
+ platform_driver_register(&hdmi_phy_platform_driver);
+}
+
+void __exit hdmi_phy_driver_unregister(void)
+{
+ platform_driver_unregister(&hdmi_phy_platform_driver);
+}
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c
index 3a01cb5..cbdd700 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c
@@ -464,6 +464,24 @@ static const struct hdmi_phy_funcs hdmi_phy_8960_funcs = {
.powerdown = hdmi_phy_8960_powerdown,
};
+static const char * const hdmi_phy_8960_reg_names[] = {
+ "core-vdda",
+};
+
+static const char * const hdmi_phy_8960_clk_names[] = {
+ "slave_iface_clk",
+};
+
+const struct hdmi_phy_cfg hdmi_phy_8960_cfg = {
+ .type = MSM_HDMI_PHY_8960,
+ .powerup = hdmi_phy_8960_powerup,
+ .powerdown = hdmi_phy_8960_powerdown,
+ .reg_names = hdmi_phy_8960_reg_names,
+ .num_regs = ARRAY_SIZE(hdmi_phy_8960_reg_names),
+ .clk_names = hdmi_phy_8960_clk_names,
+ .num_clks = ARRAY_SIZE(hdmi_phy_8960_clk_names),
+};
+
struct hdmi_phy *hdmi_phy_8960_init(struct hdmi *hdmi)
{
struct hdmi_phy_8960 *phy_8960;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
index cb01421..d529164 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
@@ -155,6 +155,12 @@ static const struct hdmi_phy_funcs hdmi_phy_8x60_funcs = {
.powerdown = hdmi_phy_8x60_powerdown,
};
+const struct hdmi_phy_cfg hdmi_phy_8x60_cfg = {
+ .type = MSM_HDMI_PHY_8x60,
+ .powerup = hdmi_phy_8x60_powerup,
+ .powerdown = hdmi_phy_8x60_powerdown,
+};
+
struct hdmi_phy *hdmi_phy_8x60_init(struct hdmi *hdmi)
{
struct hdmi_phy_8x60 *phy_8x60;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c
index 56ab891..5e42d92 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c
@@ -67,6 +67,26 @@ static const struct hdmi_phy_funcs hdmi_phy_8x74_funcs = {
.powerdown = hdmi_phy_8x74_powerdown,
};
+static const char * const hdmi_phy_8x74_reg_names[] = {
+ "core-vdda",
+ "vddio",
+};
+
+static const char * const hdmi_phy_8x74_clk_names[] = {
+ "iface_clk",
+ "alt_iface_clk"
+};
+
+const struct hdmi_phy_cfg hdmi_phy_8x74_cfg = {
+ .type = MSM_HDMI_PHY_8x74,
+ .powerup = hdmi_phy_8x74_powerup,
+ .powerdown = hdmi_phy_8x74_powerdown,
+ .reg_names = hdmi_phy_8x74_reg_names,
+ .num_regs = ARRAY_SIZE(hdmi_phy_8x74_reg_names),
+ .clk_names = hdmi_phy_8x74_clk_names,
+ .num_clks = ARRAY_SIZE(hdmi_phy_8x74_clk_names),
+};
+
struct hdmi_phy *hdmi_phy_8x74_init(struct hdmi *hdmi)
{
struct hdmi_phy_8x74 *phy_8x74;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 08/13] drm/msm/hdmi: Make hdmi core get its phy
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (6 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 07/13] drm/msm/hdmi: Create a separate hdmi phy driver Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 09/13] drm/msm/hdmi: Manage hdmi PLL through phy driver Archit Taneja
` (4 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
Make hdmi core get its phy by parsing the qcom,hdmi-phy phandle. The core
will use this phy reference to enable/disable phy. The driver defers probe
until phy isn't available.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 40 ++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/msm/hdmi/hdmi.h | 2 ++
2 files changed, 42 insertions(+)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 0fe5411..61b191d 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -81,12 +81,46 @@ static void hdmi_destroy(struct hdmi *hdmi)
if (phy)
phy->funcs->destroy(phy);
+ if (hdmi->phy_dev) {
+ put_device(hdmi->phy_dev);
+ hdmi->phy = NULL;
+ hdmi->phy_dev = NULL;
+ }
+
if (hdmi->i2c)
hdmi_i2c_destroy(hdmi->i2c);
platform_set_drvdata(hdmi->pdev, NULL);
}
+static int hdmi_get_phy(struct hdmi *hdmi)
+{
+ struct platform_device *pdev = hdmi->pdev;
+ struct platform_device *phy_pdev;
+ struct device_node *phy_node;
+
+ phy_node = of_parse_phandle(pdev->dev.of_node, "qcom,hdmi-phy", 0);
+ if (!phy_node) {
+ dev_err(&pdev->dev, "cannot find phy device\n");
+ return -ENXIO;
+ }
+
+ phy_pdev = of_find_device_by_node(phy_node);
+ if (phy_pdev)
+ hdmi->phy = platform_get_drvdata(phy_pdev);
+
+ of_node_put(phy_node);
+
+ if (!phy_pdev || !hdmi->phy) {
+ dev_err(&pdev->dev, "phy driver is not ready\n");
+ return -EPROBE_DEFER;
+ }
+
+ hdmi->phy_dev = get_device(&phy_pdev->dev);
+
+ return 0;
+}
+
/* construct hdmi at bind/probe time, grab all the resources. If
* we are to EPROBE_DEFER we want to do it here, rather than later
* at modeset_init() time
@@ -230,6 +264,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
goto fail;
}
+ ret = hdmi_get_phy(hdmi);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get phy\n");
+ goto fail;
+ }
+
hdmi->hdcp_ctrl = hdmi_hdcp_init(hdmi);
if (IS_ERR(hdmi->hdcp_ctrl)) {
dev_warn(&pdev->dev, "failed to init hdcp: disabled\n");
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 3404235..45347d5 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -70,6 +70,8 @@ struct hdmi {
struct clk **pwr_clks;
struct hdmi_phy *phy;
+ struct device *phy_dev;
+
struct i2c_adapter *i2c;
struct drm_connector *connector;
struct drm_bridge *bridge;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 09/13] drm/msm/hdmi: Manage hdmi PLL through phy driver
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (7 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 08/13] drm/msm/hdmi: Make hdmi core get its phy Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 10/13] drm/msm/hdmi: Convert phy files according to new design Archit Taneja
` (3 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
Add a helper to initialize PLL in the phy driver.
HDMI PLLs are going to have their own mmio base different from that of
PHY.
For the clock code in hdmi_phy_8960.c, some changes were needed for it to
work with the updated register offsets. Create a copy of the updated clock
code in hdmi_pll_8960.c, instead of rewriting it in hdmi_phy_8960.c
itself. This removes the need to place CONFIG_COMMON_CLOCK checks all
around, makes the code more legible, and also removes some old checkpatch
warnings with the original code.
The older hdmi pll clock ops in hdmi_phy_8960.c will be removed later.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/Makefile | 2 +
drivers/gpu/drm/msm/hdmi/hdmi.h | 9 +
drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 35 +++
drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 462 +++++++++++++++++++++++++++++++
4 files changed, 508 insertions(+)
create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
diff --git a/drivers/gpu/drm/msm/hdmi/Makefile b/drivers/gpu/drm/msm/hdmi/Makefile
index aeb9329..9f2040c 100644
--- a/drivers/gpu/drm/msm/hdmi/Makefile
+++ b/drivers/gpu/drm/msm/hdmi/Makefile
@@ -2,3 +2,5 @@ ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
obj-y := hdmi.o hdmi_phy.o hdmi_audio.o hdmi_bridge.o hdmi_connector.o \
hdmi_hdcp.o hdmi_i2c.o hdmi_phy_8960.o hdmi_phy_8x60.o hdmi_phy_8x74.o
+
+obj-$(CONFIG_COMMON_CLK) += hdmi_pll_8960.o
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 45347d5..f8122cf 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -200,6 +200,15 @@ void hdmi_phy_powerdown(struct hdmi_phy *phy);
void __init hdmi_phy_driver_register(void);
void __exit hdmi_phy_driver_unregister(void);
+#ifdef CONFIG_COMMON_CLK
+int hdmi_pll_8960_init(struct platform_device *pdev);
+#else
+int hdmi_pll_8960_init(struct platform_device *pdev);
+{
+ return -ENODEV;
+}
+#endif
+
/*
* audio:
*/
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
index 184a061..54c4b37 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
@@ -118,6 +118,28 @@ void hdmi_phy_powerdown(struct hdmi_phy *phy)
phy->cfg->powerdown(phy);
}
+static int hdmi_phy_pll_init(struct platform_device *pdev,
+ enum hdmi_phy_type type)
+{
+ int ret;
+
+ switch (type) {
+ case MSM_HDMI_PHY_8960:
+ ret = hdmi_pll_8960_init(pdev);
+ break;
+ /*
+ * we don't have PLL support for these, don't report an error for now
+ */
+ case MSM_HDMI_PHY_8x60:
+ case MSM_HDMI_PHY_8x74:
+ default:
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
+
static int hdmi_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -146,6 +168,19 @@ static int hdmi_phy_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
+ ret = hdmi_phy_resource_enable(phy);
+ if (ret)
+ return ret;
+
+ ret = hdmi_phy_pll_init(pdev, phy->cfg->type);
+ if (ret) {
+ dev_err(dev, "couldn't init PLL\n");
+ hdmi_phy_resource_disable(phy);
+ return ret;
+ }
+
+ hdmi_phy_resource_disable(phy);
+
platform_set_drvdata(pdev, phy);
return 0;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
new file mode 100644
index 0000000..e0464fa
--- /dev/null
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk-provider.h>
+#include "hdmi.h"
+
+struct hdmi_pll_8960 {
+ struct platform_device *pdev;
+ struct clk_hw clk_hw;
+ void __iomem *mmio;
+
+ unsigned long pixclk;
+};
+
+#define hw_clk_to_pll(x) container_of(x, struct hdmi_pll_8960, clk_hw)
+
+/*
+ * HDMI PLL:
+ *
+ * To get the parent clock setup properly, we need to plug in hdmi pll
+ * configuration into common-clock-framework.
+ */
+
+struct pll_rate {
+ unsigned long rate;
+ int num_reg;
+ struct {
+ u32 val;
+ u32 reg;
+ } conf[32];
+};
+
+/* NOTE: keep sorted highest freq to lowest: */
+static const struct pll_rate freqtbl[] = {
+ { 154000000, 14, {
+ { 0x08, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x0d, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4d, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x5e, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0x42, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ }
+ },
+ /* 1080p60/1080p50 case */
+ { 148500000, 27, {
+ { 0x02, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
+ { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
+ { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x76, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x01, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
+ { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
+ { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
+ { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
+ { 0xe6, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
+ }
+ },
+ { 108000000, 13, {
+ { 0x08, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x21, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x1c, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x49, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x49, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ }
+ },
+ /* 720p60/720p50/1080i60/1080i50/1080p24/1080p30/1080p25 */
+ { 74250000, 8, {
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x12, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x76, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0xe6, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ }
+ },
+ { 74176000, 14, {
+ { 0x18, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0xe5, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x0c, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x7d, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0xbc, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ }
+ },
+ { 65000000, 14, {
+ { 0x18, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x8a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x0b, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4b, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x7b, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0x09, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ }
+ },
+ /* 480p60/480i60 */
+ { 27030000, 18, {
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x38, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
+ { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xff, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4e, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0xd7, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0x03, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ { 0x2a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
+ }
+ },
+ /* 576p50/576i50 */
+ { 27000000, 27, {
+ { 0x32, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
+ { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
+ { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x7b, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x01, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
+ { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
+ { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
+ { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
+ { 0x2a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
+ }
+ },
+ /* 640x480p60 */
+ { 25200000, 27, {
+ { 0x32, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
+ { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
+ { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x77, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
+ { 0x20, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
+ { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
+ { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
+ { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
+ { 0xf4, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
+ }
+ },
+};
+
+static inline void pll_write(struct hdmi_pll_8960 *pll, u32 reg, u32 data)
+{
+ msm_writel(data, pll->mmio + reg);
+}
+
+static inline u32 pll_read(struct hdmi_pll_8960 *pll, u32 reg)
+{
+ return msm_readl(pll->mmio + reg);
+}
+
+static inline struct hdmi_phy *pll_get_phy(struct hdmi_pll_8960 *pll)
+{
+ return platform_get_drvdata(pll->pdev);
+}
+
+static int hdmi_pll_enable(struct clk_hw *hw)
+{
+ struct hdmi_pll_8960 *pll = hw_clk_to_pll(hw);
+ struct hdmi_phy *phy = pll_get_phy(pll);
+ int timeout_count, pll_lock_retry = 10;
+ unsigned int val;
+
+ DBG("");
+
+ /* Assert PLL S/W reset */
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x8d);
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0, 0x10);
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1, 0x1a);
+
+ /* Wait for a short time before de-asserting
+ * to allow the hardware to complete its job.
+ * This much of delay should be fine for hardware
+ * to assert and de-assert.
+ */
+ udelay(10);
+
+ /* De-assert PLL S/W reset */
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x0d);
+
+ val = hdmi_phy_read(phy, REG_HDMI_8960_PHY_REG12);
+ val |= HDMI_8960_PHY_REG12_SW_RESET;
+ /* Assert PHY S/W reset */
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG12, val);
+ val &= ~HDMI_8960_PHY_REG12_SW_RESET;
+ /*
+ * Wait for a short time before de-asserting to allow the hardware to
+ * complete its job. This much of delay should be fine for hardware to
+ * assert and de-assert.
+ */
+ udelay(10);
+ /* De-assert PHY S/W reset */
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG12, val);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG2, 0x3f);
+
+ val = hdmi_phy_read(phy, REG_HDMI_8960_PHY_REG12);
+ val |= HDMI_8960_PHY_REG12_PWRDN_B;
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG12, val);
+ /* Wait 10 us for enabling global power for PHY */
+ mb();
+ udelay(10);
+
+ val = pll_read(pll, REG_HDMI_8960_PHY_PLL_PWRDN_B);
+ val |= HDMI_8960_PHY_PLL_PWRDN_B_PLL_PWRDN_B;
+ val &= ~HDMI_8960_PHY_PLL_PWRDN_B_PD_PLL;
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_PWRDN_B, val);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG2, 0x80);
+
+ timeout_count = 1000;
+ while (--pll_lock_retry > 0) {
+
+ /* are we there yet? */
+ val = pll_read(pll, REG_HDMI_8960_PHY_PLL_STATUS0);
+ if (val & HDMI_8960_PHY_PLL_STATUS0_PLL_LOCK)
+ break;
+
+ udelay(1);
+
+ if (--timeout_count > 0)
+ continue;
+
+ /*
+ * PLL has still not locked.
+ * Do a software reset and try again
+ * Assert PLL S/W reset first
+ */
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x8d);
+ udelay(10);
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x0d);
+
+ /*
+ * Wait for a short duration for the PLL calibration
+ * before checking if the PLL gets locked
+ */
+ udelay(350);
+
+ timeout_count = 1000;
+ }
+
+ return 0;
+}
+
+static void hdmi_pll_disable(struct clk_hw *hw)
+{
+ struct hdmi_pll_8960 *pll = hw_clk_to_pll(hw);
+ struct hdmi_phy *phy = pll_get_phy(pll);
+ unsigned int val;
+
+ DBG("");
+
+ val = hdmi_phy_read(phy, REG_HDMI_8960_PHY_REG12);
+ val &= ~HDMI_8960_PHY_REG12_PWRDN_B;
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG12, val);
+
+ val = pll_read(pll, REG_HDMI_8960_PHY_PLL_PWRDN_B);
+ val |= HDMI_8960_PHY_REG12_SW_RESET;
+ val &= ~HDMI_8960_PHY_REG12_PWRDN_B;
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_PWRDN_B, val);
+ /* Make sure HDMI PHY/PLL are powered down */
+ mb();
+}
+
+static const struct pll_rate *find_rate(unsigned long rate)
+{
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(freqtbl); i++)
+ if (rate > freqtbl[i].rate)
+ return &freqtbl[i - 1];
+
+ return &freqtbl[i - 1];
+}
+
+static unsigned long hdmi_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct hdmi_pll_8960 *pll = hw_clk_to_pll(hw);
+
+ return pll->pixclk;
+}
+
+static long hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ const struct pll_rate *pll_rate = find_rate(rate);
+
+ return pll_rate->rate;
+}
+
+static int hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct hdmi_pll_8960 *pll = hw_clk_to_pll(hw);
+ const struct pll_rate *pll_rate = find_rate(rate);
+ int i;
+
+ DBG("rate=%lu", rate);
+
+ for (i = 0; i < pll_rate->num_reg; i++)
+ pll_write(pll, pll_rate->conf[i].reg, pll_rate->conf[i].val);
+
+ pll->pixclk = rate;
+
+ return 0;
+}
+
+static const struct clk_ops hdmi_pll_ops = {
+ .enable = hdmi_pll_enable,
+ .disable = hdmi_pll_disable,
+ .recalc_rate = hdmi_pll_recalc_rate,
+ .round_rate = hdmi_pll_round_rate,
+ .set_rate = hdmi_pll_set_rate,
+};
+
+static const char * const hdmi_pll_parents[] = {
+ "pxo",
+};
+
+static struct clk_init_data pll_init = {
+ .name = "hdmi_pll",
+ .ops = &hdmi_pll_ops,
+ .parent_names = hdmi_pll_parents,
+ .num_parents = ARRAY_SIZE(hdmi_pll_parents),
+};
+
+int hdmi_pll_8960_init(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct hdmi_pll_8960 *pll;
+ struct clk *clk;
+ int i;
+
+ /* sanity check: */
+ for (i = 0; i < (ARRAY_SIZE(freqtbl) - 1); i++)
+ if (WARN_ON(freqtbl[i].rate < freqtbl[i + 1].rate))
+ return -EINVAL;
+
+ pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return -ENOMEM;
+
+ pll->mmio = msm_ioremap(pdev, "hdmi_pll", "HDMI_PLL");
+ if (IS_ERR(pll->mmio)) {
+ dev_err(dev, "failed to map pll base\n");
+ return -ENOMEM;
+ }
+
+ pll->pdev = pdev;
+ pll->clk_hw.init = &pll_init;
+
+ clk = devm_clk_register(dev, &pll->clk_hw);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to register pll clock\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 10/13] drm/msm/hdmi: Convert phy files according to new design
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (8 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 09/13] drm/msm/hdmi: Manage hdmi PLL through phy driver Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 11/13] drm/msm/hdmi: Update generated headers for hdmi 8996 phy Archit Taneja
` (2 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
Remove the old phy ops managed by hdmi_platform_config and use them as ops
provided by the hdmi phy driver.
Remove the old hdmi 8960 PLL code that used the top level hdmi tx mmio
base.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 25 +-
drivers/gpu/drm/msm/hdmi/hdmi.h | 10 -
drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 8 +-
drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c | 493 +------------------------------
drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c | 194 +++++-------
drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c | 82 +----
6 files changed, 100 insertions(+), 712 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 61b191d..6002988 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -67,8 +67,6 @@ static irqreturn_t hdmi_irq(int irq, void *dev_id)
static void hdmi_destroy(struct hdmi *hdmi)
{
- struct hdmi_phy *phy = hdmi->phy;
-
/*
* at this point, hpd has been disabled,
* after flush workq, it's safe to deinit hdcp
@@ -78,8 +76,6 @@ static void hdmi_destroy(struct hdmi *hdmi)
destroy_workqueue(hdmi->workq);
}
hdmi_hdcp_destroy(hdmi);
- if (phy)
- phy->funcs->destroy(phy);
if (hdmi->phy_dev) {
put_device(hdmi->phy_dev);
@@ -142,18 +138,6 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
hdmi->config = config;
spin_lock_init(&hdmi->reg_lock);
- /* not sure about which phy maps to which msm.. probably I miss some */
- if (config->phy_init) {
- hdmi->phy = config->phy_init(hdmi);
-
- if (IS_ERR(hdmi->phy)) {
- ret = PTR_ERR(hdmi->phy);
- dev_err(&pdev->dev, "failed to load phy: %d\n", ret);
- hdmi->phy = NULL;
- goto fail;
- }
- }
-
hdmi->mmio = msm_ioremap(pdev, config->mmio_name, "HDMI");
if (IS_ERR(hdmi->mmio)) {
ret = PTR_ERR(hdmi->mmio);
@@ -371,15 +355,12 @@ fail:
static const char *pwr_reg_names_none[] = {};
static const char *hpd_reg_names_none[] = {};
-static struct hdmi_platform_config hdmi_tx_8660_config = {
- .phy_init = hdmi_phy_8x60_init,
-};
+static struct hdmi_platform_config hdmi_tx_8660_config;
static const char *hpd_reg_names_8960[] = {"core-vdda", "hdmi-mux"};
static const char *hpd_clk_names_8960[] = {"core_clk", "master_iface_clk", "slave_iface_clk"};
static struct hdmi_platform_config hdmi_tx_8960_config = {
- .phy_init = hdmi_phy_8960_init,
HDMI_CFG(hpd_reg, 8960),
HDMI_CFG(hpd_clk, 8960),
};
@@ -391,7 +372,6 @@ static const char *hpd_clk_names_8x74[] = {"iface_clk", "core_clk", "mdp_core_cl
static unsigned long hpd_clk_freq_8x74[] = {0, 19200000, 0};
static struct hdmi_platform_config hdmi_tx_8974_config = {
- .phy_init = hdmi_phy_8x74_init,
HDMI_CFG(pwr_reg, 8x74),
HDMI_CFG(hpd_reg, 8x74),
HDMI_CFG(pwr_clk, 8x74),
@@ -402,7 +382,6 @@ static struct hdmi_platform_config hdmi_tx_8974_config = {
static const char *hpd_reg_names_8084[] = {"hpd-gdsc", "hpd-5v", "hpd-5v-en"};
static struct hdmi_platform_config hdmi_tx_8084_config = {
- .phy_init = hdmi_phy_8x74_init,
HDMI_CFG(pwr_reg, 8x74),
HDMI_CFG(hpd_reg, 8084),
HDMI_CFG(pwr_clk, 8x74),
@@ -411,7 +390,6 @@ static struct hdmi_platform_config hdmi_tx_8084_config = {
};
static struct hdmi_platform_config hdmi_tx_8994_config = {
- .phy_init = NULL, /* nothing to do for this HDMI PHY 20nm */
HDMI_CFG(pwr_reg, 8x74),
HDMI_CFG(hpd_reg, none),
HDMI_CFG(pwr_clk, 8x74),
@@ -420,7 +398,6 @@ static struct hdmi_platform_config hdmi_tx_8994_config = {
};
static struct hdmi_platform_config hdmi_tx_8996_config = {
- .phy_init = NULL,
HDMI_CFG(pwr_reg, none),
HDMI_CFG(hpd_reg, none),
HDMI_CFG(pwr_clk, 8x74),
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index f8122cf..1f498b0 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -98,7 +98,6 @@ struct hdmi {
/* platform config data (ie. from DT, or pdata) */
struct hdmi_platform_config {
- struct hdmi_phy *(*phy_init)(struct hdmi *hdmi);
const char *mmio_name;
const char *qfprom_mmio_name;
@@ -143,11 +142,6 @@ static inline u32 hdmi_qfprom_read(struct hdmi *hdmi, u32 reg)
/*
* hdmi phy:
*/
-struct hdmi_phy_funcs {
- void (*destroy)(struct hdmi_phy *phy);
- void (*powerup)(struct hdmi_phy *phy, unsigned long int pixclock);
- void (*powerdown)(struct hdmi_phy *phy);
-};
enum hdmi_phy_type {
MSM_HDMI_PHY_8x60,
@@ -179,10 +173,6 @@ struct hdmi_phy {
struct clk **clks;
};
-struct hdmi_phy *hdmi_phy_8960_init(struct hdmi *hdmi);
-struct hdmi_phy *hdmi_phy_8x60_init(struct hdmi *hdmi);
-struct hdmi_phy *hdmi_phy_8x74_init(struct hdmi *hdmi);
-
static inline void hdmi_phy_write(struct hdmi_phy *phy, u32 reg, u32 data)
{
msm_writel(data, phy->mmio + reg);
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
index 92b69ae..310d92d 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
@@ -95,13 +95,13 @@ static void hdmi_bridge_pre_enable(struct drm_bridge *bridge)
DBG("power up");
if (!hdmi->power_on) {
+ hdmi_phy_resource_enable(phy);
power_on(bridge);
hdmi->power_on = true;
hdmi_audio_update(hdmi);
}
- if (phy)
- phy->funcs->powerup(phy, hdmi->pixclock);
+ hdmi_phy_powerup(phy, hdmi->pixclock);
hdmi_set_mode(hdmi, true);
@@ -129,13 +129,13 @@ static void hdmi_bridge_post_disable(struct drm_bridge *bridge)
DBG("power down");
hdmi_set_mode(hdmi, false);
- if (phy)
- phy->funcs->powerdown(phy);
+ hdmi_phy_powerdown(phy);
if (hdmi->power_on) {
power_off(bridge);
hdmi->power_on = false;
hdmi_audio_update(hdmi);
+ hdmi_phy_resource_disable(phy);
}
}
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c
index cbdd700..46d449e 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c
@@ -15,455 +15,34 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifdef CONFIG_COMMON_CLK
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#endif
-
#include "hdmi.h"
-struct hdmi_phy_8960 {
- struct hdmi_phy base;
- struct hdmi *hdmi;
-#ifdef CONFIG_COMMON_CLK
- struct clk_hw pll_hw;
- struct clk *pll;
- unsigned long pixclk;
-#endif
-};
-#define to_hdmi_phy_8960(x) container_of(x, struct hdmi_phy_8960, base)
-
-#ifdef CONFIG_COMMON_CLK
-#define clk_to_phy(x) container_of(x, struct hdmi_phy_8960, pll_hw)
-
-/*
- * HDMI PLL:
- *
- * To get the parent clock setup properly, we need to plug in hdmi pll
- * configuration into common-clock-framework.
- */
-
-struct pll_rate {
- unsigned long rate;
- struct {
- uint32_t val;
- uint32_t reg;
- } conf[32];
-};
-
-/* NOTE: keep sorted highest freq to lowest: */
-static const struct pll_rate freqtbl[] = {
- { 154000000, {
- { 0x08, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
- { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
- { 0x0d, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0x4d, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
- { 0x5e, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
- { 0x42, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
- { 0, 0 } }
- },
- /* 1080p60/1080p50 case */
- { 148500000, {
- { 0x02, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
- { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
- { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
- { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
- { 0x76, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0x01, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
- { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
- { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
- { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
- { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
- { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
- { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
- { 0xe6, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
- { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
- { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
- { 0, 0 } }
- },
- { 108000000, {
- { 0x08, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x21, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0x1c, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
- { 0x49, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0x49, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
- { 0, 0 } }
- },
- /* 720p60/720p50/1080i60/1080i50/1080p24/1080p30/1080p25 */
- { 74250000, {
- { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
- { 0x12, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0x76, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0xe6, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0, 0 } }
- },
- { 74176000, {
- { 0x18, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0xe5, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
- { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
- { 0x0c, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
- { 0x7d, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
- { 0xbc, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
- { 0, 0 } }
- },
- { 65000000, {
- { 0x18, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0x8a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
- { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
- { 0x0b, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0x4b, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
- { 0x7b, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
- { 0x09, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
- { 0, 0 } }
- },
- /* 480p60/480i60 */
- { 27030000, {
- { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
- { 0x38, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
- { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0xff, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0x4e, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
- { 0xd7, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
- { 0x03, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
- { 0x2a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
- { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
- { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
- { 0, 0 } }
- },
- /* 576p50/576i50 */
- { 27000000, {
- { 0x32, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
- { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
- { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
- { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
- { 0x7b, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0x01, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
- { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
- { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
- { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
- { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
- { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
- { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
- { 0x2a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
- { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
- { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
- { 0, 0 } }
- },
- /* 640x480p60 */
- { 25200000, {
- { 0x32, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
- { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
- { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
- { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
- { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
- { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
- { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
- { 0x77, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
- { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
- { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
- { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
- { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
- { 0x20, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
- { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
- { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
- { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
- { 0xf4, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
- { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
- { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
- { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
- { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
- { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
- { 0, 0 } }
- },
-};
-
-static int hdmi_pll_enable(struct clk_hw *hw)
-{
- struct hdmi_phy_8960 *phy_8960 = clk_to_phy(hw);
- struct hdmi *hdmi = phy_8960->hdmi;
- int timeout_count, pll_lock_retry = 10;
- unsigned int val;
-
- DBG("");
-
- /* Assert PLL S/W reset */
- hdmi_write(hdmi, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x8d);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0, 0x10);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1, 0x1a);
-
- /* Wait for a short time before de-asserting
- * to allow the hardware to complete its job.
- * This much of delay should be fine for hardware
- * to assert and de-assert.
- */
- udelay(10);
-
- /* De-assert PLL S/W reset */
- hdmi_write(hdmi, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x0d);
-
- val = hdmi_read(hdmi, REG_HDMI_8960_PHY_REG12);
- val |= HDMI_8960_PHY_REG12_SW_RESET;
- /* Assert PHY S/W reset */
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG12, val);
- val &= ~HDMI_8960_PHY_REG12_SW_RESET;
- /* Wait for a short time before de-asserting
- to allow the hardware to complete its job.
- This much of delay should be fine for hardware
- to assert and de-assert. */
- udelay(10);
- /* De-assert PHY S/W reset */
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG12, val);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG2, 0x3f);
-
- val = hdmi_read(hdmi, REG_HDMI_8960_PHY_REG12);
- val |= HDMI_8960_PHY_REG12_PWRDN_B;
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG12, val);
- /* Wait 10 us for enabling global power for PHY */
- mb();
- udelay(10);
-
- val = hdmi_read(hdmi, REG_HDMI_8960_PHY_PLL_PWRDN_B);
- val |= HDMI_8960_PHY_PLL_PWRDN_B_PLL_PWRDN_B;
- val &= ~HDMI_8960_PHY_PLL_PWRDN_B_PD_PLL;
- hdmi_write(hdmi, REG_HDMI_8960_PHY_PLL_PWRDN_B, val);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG2, 0x80);
-
- timeout_count = 1000;
- while (--pll_lock_retry > 0) {
-
- /* are we there yet? */
- val = hdmi_read(hdmi, REG_HDMI_8960_PHY_PLL_STATUS0);
- if (val & HDMI_8960_PHY_PLL_STATUS0_PLL_LOCK)
- break;
-
- udelay(1);
-
- if (--timeout_count > 0)
- continue;
-
- /*
- * PLL has still not locked.
- * Do a software reset and try again
- * Assert PLL S/W reset first
- */
- hdmi_write(hdmi, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x8d);
- udelay(10);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x0d);
-
- /*
- * Wait for a short duration for the PLL calibration
- * before checking if the PLL gets locked
- */
- udelay(350);
-
- timeout_count = 1000;
- }
-
- return 0;
-}
-
-static void hdmi_pll_disable(struct clk_hw *hw)
-{
- struct hdmi_phy_8960 *phy_8960 = clk_to_phy(hw);
- struct hdmi *hdmi = phy_8960->hdmi;
- unsigned int val;
-
- DBG("");
-
- val = hdmi_read(hdmi, REG_HDMI_8960_PHY_REG12);
- val &= ~HDMI_8960_PHY_REG12_PWRDN_B;
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG12, val);
-
- val = hdmi_read(hdmi, REG_HDMI_8960_PHY_PLL_PWRDN_B);
- val |= HDMI_8960_PHY_REG12_SW_RESET;
- val &= ~HDMI_8960_PHY_REG12_PWRDN_B;
- hdmi_write(hdmi, REG_HDMI_8960_PHY_PLL_PWRDN_B, val);
- /* Make sure HDMI PHY/PLL are powered down */
- mb();
-}
-
-static const struct pll_rate *find_rate(unsigned long rate)
-{
- int i;
- for (i = 1; i < ARRAY_SIZE(freqtbl); i++)
- if (rate > freqtbl[i].rate)
- return &freqtbl[i-1];
- return &freqtbl[i-1];
-}
-
-static unsigned long hdmi_pll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct hdmi_phy_8960 *phy_8960 = clk_to_phy(hw);
- return phy_8960->pixclk;
-}
-
-static long hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
-{
- const struct pll_rate *pll_rate = find_rate(rate);
- return pll_rate->rate;
-}
-
-static int hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct hdmi_phy_8960 *phy_8960 = clk_to_phy(hw);
- struct hdmi *hdmi = phy_8960->hdmi;
- const struct pll_rate *pll_rate = find_rate(rate);
- int i;
-
- DBG("rate=%lu", rate);
-
- for (i = 0; pll_rate->conf[i].reg; i++)
- hdmi_write(hdmi, pll_rate->conf[i].reg, pll_rate->conf[i].val);
-
- phy_8960->pixclk = rate;
-
- return 0;
-}
-
-
-static const struct clk_ops hdmi_pll_ops = {
- .enable = hdmi_pll_enable,
- .disable = hdmi_pll_disable,
- .recalc_rate = hdmi_pll_recalc_rate,
- .round_rate = hdmi_pll_round_rate,
- .set_rate = hdmi_pll_set_rate,
-};
-
-static const char *hdmi_pll_parents[] = {
- "pxo",
-};
-
-static struct clk_init_data pll_init = {
- .name = "hdmi_pll",
- .ops = &hdmi_pll_ops,
- .parent_names = hdmi_pll_parents,
- .num_parents = ARRAY_SIZE(hdmi_pll_parents),
-};
-#endif
-
-/*
- * HDMI Phy:
- */
-
-static void hdmi_phy_8960_destroy(struct hdmi_phy *phy)
-{
- struct hdmi_phy_8960 *phy_8960 = to_hdmi_phy_8960(phy);
- kfree(phy_8960);
-}
-
static void hdmi_phy_8960_powerup(struct hdmi_phy *phy,
- unsigned long int pixclock)
+ unsigned long int pixclock)
{
- struct hdmi_phy_8960 *phy_8960 = to_hdmi_phy_8960(phy);
- struct hdmi *hdmi = phy_8960->hdmi;
-
DBG("pixclock: %lu", pixclock);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG2, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG0, 0x1b);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG1, 0xf2);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG4, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG5, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG6, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG7, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG8, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG9, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG10, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG11, 0x00);
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG3, 0x20);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG2, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG0, 0x1b);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG1, 0xf2);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG4, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG5, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG6, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG7, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG8, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG9, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG10, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG11, 0x00);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG3, 0x20);
}
static void hdmi_phy_8960_powerdown(struct hdmi_phy *phy)
{
- struct hdmi_phy_8960 *phy_8960 = to_hdmi_phy_8960(phy);
- struct hdmi *hdmi = phy_8960->hdmi;
-
DBG("");
- hdmi_write(hdmi, REG_HDMI_8960_PHY_REG2, 0x7f);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG2, 0x7f);
}
-static const struct hdmi_phy_funcs hdmi_phy_8960_funcs = {
- .destroy = hdmi_phy_8960_destroy,
- .powerup = hdmi_phy_8960_powerup,
- .powerdown = hdmi_phy_8960_powerdown,
-};
-
static const char * const hdmi_phy_8960_reg_names[] = {
"core-vdda",
};
@@ -481,47 +60,3 @@ const struct hdmi_phy_cfg hdmi_phy_8960_cfg = {
.clk_names = hdmi_phy_8960_clk_names,
.num_clks = ARRAY_SIZE(hdmi_phy_8960_clk_names),
};
-
-struct hdmi_phy *hdmi_phy_8960_init(struct hdmi *hdmi)
-{
- struct hdmi_phy_8960 *phy_8960;
- struct hdmi_phy *phy = NULL;
- int ret;
-#ifdef CONFIG_COMMON_CLK
- int i;
-
- /* sanity check: */
- for (i = 0; i < (ARRAY_SIZE(freqtbl) - 1); i++)
- if (WARN_ON(freqtbl[i].rate < freqtbl[i+1].rate))
- return ERR_PTR(-EINVAL);
-#endif
-
- phy_8960 = kzalloc(sizeof(*phy_8960), GFP_KERNEL);
- if (!phy_8960) {
- ret = -ENOMEM;
- goto fail;
- }
-
- phy = &phy_8960->base;
-
- phy->funcs = &hdmi_phy_8960_funcs;
-
- phy_8960->hdmi = hdmi;
-
-#ifdef CONFIG_COMMON_CLK
- phy_8960->pll_hw.init = &pll_init;
- phy_8960->pll = devm_clk_register(&hdmi->pdev->dev, &phy_8960->pll_hw);
- if (IS_ERR(phy_8960->pll)) {
- ret = PTR_ERR(phy_8960->pll);
- phy_8960->pll = NULL;
- goto fail;
- }
-#endif
-
- return phy;
-
-fail:
- if (phy)
- hdmi_phy_8960_destroy(phy);
- return ERR_PTR(ret);
-}
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
index d529164..38022b3 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
@@ -17,172 +17,122 @@
#include "hdmi.h"
-struct hdmi_phy_8x60 {
- struct hdmi_phy base;
- struct hdmi *hdmi;
-};
-#define to_hdmi_phy_8x60(x) container_of(x, struct hdmi_phy_8x60, base)
-
-static void hdmi_phy_8x60_destroy(struct hdmi_phy *phy)
-{
- struct hdmi_phy_8x60 *phy_8x60 = to_hdmi_phy_8x60(phy);
- kfree(phy_8x60);
-}
-
static void hdmi_phy_8x60_powerup(struct hdmi_phy *phy,
unsigned long int pixclock)
{
- struct hdmi_phy_8x60 *phy_8x60 = to_hdmi_phy_8x60(phy);
- struct hdmi *hdmi = phy_8x60->hdmi;
-
/* De-serializer delay D/C for non-lbk mode: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG0,
- HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3));
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG0,
+ HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3));
if (pixclock == 27000000) {
/* video_format == HDMI_VFRMT_720x480p60_16_9 */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG1,
- HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
- HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3));
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
+ HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
+ HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3));
} else {
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG1,
- HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
- HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4));
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
+ HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
+ HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4));
}
/* No matter what, start from the power down mode: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
- HDMI_8x60_PHY_REG2_PD_PWRGEN |
- HDMI_8x60_PHY_REG2_PD_PLL |
- HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
- HDMI_8x60_PHY_REG2_PD_DESER);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
+ HDMI_8x60_PHY_REG2_PD_PWRGEN |
+ HDMI_8x60_PHY_REG2_PD_PLL |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+ HDMI_8x60_PHY_REG2_PD_DESER);
/* Turn PowerGen on: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
- HDMI_8x60_PHY_REG2_PD_PLL |
- HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
- HDMI_8x60_PHY_REG2_PD_DESER);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
+ HDMI_8x60_PHY_REG2_PD_PLL |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+ HDMI_8x60_PHY_REG2_PD_DESER);
/* Turn PLL power on: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
- HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
- HDMI_8x60_PHY_REG2_PD_DESER);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
+ HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+ HDMI_8x60_PHY_REG2_PD_DESER);
/* Write to HIGH after PLL power down de-assert: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG3,
- HDMI_8x60_PHY_REG3_PLL_ENABLE);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3,
+ HDMI_8x60_PHY_REG3_PLL_ENABLE);
/* ASIC power on; PHY REG9 = 0 */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG9, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
/* Enable PLL lock detect, PLL lock det will go high after lock
* Enable the re-time logic
*/
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG12,
- HDMI_8x60_PHY_REG12_RETIMING_EN |
- HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
+ HDMI_8x60_PHY_REG12_RETIMING_EN |
+ HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN);
/* Drivers are on: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
- HDMI_8x60_PHY_REG2_PD_DESER);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
+ HDMI_8x60_PHY_REG2_PD_DESER);
/* If the RX detector is needed: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
- HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
- HDMI_8x60_PHY_REG2_PD_DESER);
-
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG4, 0);
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG5, 0);
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG6, 0);
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG7, 0);
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG8, 0);
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG9, 0);
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG10, 0);
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG11, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
+ HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
+ HDMI_8x60_PHY_REG2_PD_DESER);
+
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG4, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG5, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG6, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG7, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG8, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG10, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG11, 0);
/* If we want to use lock enable based on counting: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG12,
- HDMI_8x60_PHY_REG12_RETIMING_EN |
- HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN |
- HDMI_8x60_PHY_REG12_FORCE_LOCK);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
+ HDMI_8x60_PHY_REG12_RETIMING_EN |
+ HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN |
+ HDMI_8x60_PHY_REG12_FORCE_LOCK);
}
static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy)
{
- struct hdmi_phy_8x60 *phy_8x60 = to_hdmi_phy_8x60(phy);
- struct hdmi *hdmi = phy_8x60->hdmi;
-
/* Assert RESET PHY from controller */
- hdmi_write(hdmi, REG_HDMI_PHY_CTRL,
- HDMI_PHY_CTRL_SW_RESET);
+ hdmi_phy_write(phy, REG_HDMI_PHY_CTRL,
+ HDMI_PHY_CTRL_SW_RESET);
udelay(10);
/* De-assert RESET PHY from controller */
- hdmi_write(hdmi, REG_HDMI_PHY_CTRL, 0);
+ hdmi_phy_write(phy, REG_HDMI_PHY_CTRL, 0);
/* Turn off Driver */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
- HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
- HDMI_8x60_PHY_REG2_PD_DESER);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
+ HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+ HDMI_8x60_PHY_REG2_PD_DESER);
udelay(10);
/* Disable PLL */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG3, 0);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3, 0);
/* Power down PHY, but keep RX-sense: */
- hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
- HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
- HDMI_8x60_PHY_REG2_PD_PWRGEN |
- HDMI_8x60_PHY_REG2_PD_PLL |
- HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
- HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
- HDMI_8x60_PHY_REG2_PD_DESER);
+ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
+ HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
+ HDMI_8x60_PHY_REG2_PD_PWRGEN |
+ HDMI_8x60_PHY_REG2_PD_PLL |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+ HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+ HDMI_8x60_PHY_REG2_PD_DESER);
}
-static const struct hdmi_phy_funcs hdmi_phy_8x60_funcs = {
- .destroy = hdmi_phy_8x60_destroy,
- .powerup = hdmi_phy_8x60_powerup,
- .powerdown = hdmi_phy_8x60_powerdown,
-};
-
const struct hdmi_phy_cfg hdmi_phy_8x60_cfg = {
.type = MSM_HDMI_PHY_8x60,
.powerup = hdmi_phy_8x60_powerup,
.powerdown = hdmi_phy_8x60_powerdown,
};
-
-struct hdmi_phy *hdmi_phy_8x60_init(struct hdmi *hdmi)
-{
- struct hdmi_phy_8x60 *phy_8x60;
- struct hdmi_phy *phy = NULL;
- int ret;
-
- phy_8x60 = kzalloc(sizeof(*phy_8x60), GFP_KERNEL);
- if (!phy_8x60) {
- ret = -ENOMEM;
- goto fail;
- }
-
- phy = &phy_8x60->base;
-
- phy->funcs = &hdmi_phy_8x60_funcs;
-
- phy_8x60->hdmi = hdmi;
-
- return phy;
-
-fail:
- if (phy)
- hdmi_phy_8x60_destroy(phy);
- return ERR_PTR(ret);
-}
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c
index 5e42d92..145e38e 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c
@@ -17,56 +17,24 @@
#include "hdmi.h"
-struct hdmi_phy_8x74 {
- struct hdmi_phy base;
- void __iomem *mmio;
-};
-#define to_hdmi_phy_8x74(x) container_of(x, struct hdmi_phy_8x74, base)
-
-
-static void phy_write(struct hdmi_phy_8x74 *phy, u32 reg, u32 data)
-{
- msm_writel(data, phy->mmio + reg);
-}
-
-//static u32 phy_read(struct hdmi_phy_8x74 *phy, u32 reg)
-//{
-// return msm_readl(phy->mmio + reg);
-//}
-
-static void hdmi_phy_8x74_destroy(struct hdmi_phy *phy)
-{
- struct hdmi_phy_8x74 *phy_8x74 = to_hdmi_phy_8x74(phy);
- kfree(phy_8x74);
-}
-
static void hdmi_phy_8x74_powerup(struct hdmi_phy *phy,
unsigned long int pixclock)
{
- struct hdmi_phy_8x74 *phy_8x74 = to_hdmi_phy_8x74(phy);
-
- phy_write(phy_8x74, REG_HDMI_8x74_ANA_CFG0, 0x1b);
- phy_write(phy_8x74, REG_HDMI_8x74_ANA_CFG1, 0xf2);
- phy_write(phy_8x74, REG_HDMI_8x74_BIST_CFG0, 0x0);
- phy_write(phy_8x74, REG_HDMI_8x74_BIST_PATN0, 0x0);
- phy_write(phy_8x74, REG_HDMI_8x74_BIST_PATN1, 0x0);
- phy_write(phy_8x74, REG_HDMI_8x74_BIST_PATN2, 0x0);
- phy_write(phy_8x74, REG_HDMI_8x74_BIST_PATN3, 0x0);
- phy_write(phy_8x74, REG_HDMI_8x74_PD_CTRL1, 0x20);
+ hdmi_phy_write(phy, REG_HDMI_8x74_ANA_CFG0, 0x1b);
+ hdmi_phy_write(phy, REG_HDMI_8x74_ANA_CFG1, 0xf2);
+ hdmi_phy_write(phy, REG_HDMI_8x74_BIST_CFG0, 0x0);
+ hdmi_phy_write(phy, REG_HDMI_8x74_BIST_PATN0, 0x0);
+ hdmi_phy_write(phy, REG_HDMI_8x74_BIST_PATN1, 0x0);
+ hdmi_phy_write(phy, REG_HDMI_8x74_BIST_PATN2, 0x0);
+ hdmi_phy_write(phy, REG_HDMI_8x74_BIST_PATN3, 0x0);
+ hdmi_phy_write(phy, REG_HDMI_8x74_PD_CTRL1, 0x20);
}
static void hdmi_phy_8x74_powerdown(struct hdmi_phy *phy)
{
- struct hdmi_phy_8x74 *phy_8x74 = to_hdmi_phy_8x74(phy);
- phy_write(phy_8x74, REG_HDMI_8x74_PD_CTRL0, 0x7f);
+ hdmi_phy_write(phy, REG_HDMI_8x74_PD_CTRL0, 0x7f);
}
-static const struct hdmi_phy_funcs hdmi_phy_8x74_funcs = {
- .destroy = hdmi_phy_8x74_destroy,
- .powerup = hdmi_phy_8x74_powerup,
- .powerdown = hdmi_phy_8x74_powerdown,
-};
-
static const char * const hdmi_phy_8x74_reg_names[] = {
"core-vdda",
"vddio",
@@ -86,35 +54,3 @@ const struct hdmi_phy_cfg hdmi_phy_8x74_cfg = {
.clk_names = hdmi_phy_8x74_clk_names,
.num_clks = ARRAY_SIZE(hdmi_phy_8x74_clk_names),
};
-
-struct hdmi_phy *hdmi_phy_8x74_init(struct hdmi *hdmi)
-{
- struct hdmi_phy_8x74 *phy_8x74;
- struct hdmi_phy *phy = NULL;
- int ret;
-
- phy_8x74 = kzalloc(sizeof(*phy_8x74), GFP_KERNEL);
- if (!phy_8x74) {
- ret = -ENOMEM;
- goto fail;
- }
-
- phy = &phy_8x74->base;
-
- phy->funcs = &hdmi_phy_8x74_funcs;
-
- /* for 8x74, the phy mmio is mapped separately: */
- phy_8x74->mmio = msm_ioremap(hdmi->pdev,
- "phy_physical", "HDMI_8x74");
- if (IS_ERR(phy_8x74->mmio)) {
- ret = PTR_ERR(phy_8x74->mmio);
- goto fail;
- }
-
- return phy;
-
-fail:
- if (phy)
- hdmi_phy_8x74_destroy(phy);
- return ERR_PTR(ret);
-}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 11/13] drm/msm/hdmi: Update generated headers for hdmi 8996 phy
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (9 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 10/13] drm/msm/hdmi: Convert phy files according to new design Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 12/13] drm/msm/hdmi: HDMI 8996 PHY/PLL support Archit Taneja
2016-01-21 7:09 ` [PATCH 13/13] dt/bindings: drm/msm/hdmi: Add hdmi phy bindings Archit Taneja
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
Adds hdmi 8996 phy offsets. The offsets are divided into 3 parts:
- Core HDMI PHY registers
- HDMI PLL registers (part of QSERDES block)
- HDMI TX lane registers (part of QSERDES block)
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.xml.h | 500 +++++++++++++++++++++++++++++++++++-
1 file changed, 498 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.xml.h b/drivers/gpu/drm/msm/hdmi/hdmi.xml.h
index a542549..46c7aa4 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.xml.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.xml.h
@@ -8,10 +8,10 @@ http://github.com/freedreno/envytools/
git clone https://github.com/freedreno/envytools.git
The rules-ng-ng source files this header was generated from are:
-- /local/mnt/workspace/source_trees/envytools/rnndb/../rnndb/hdmi/hdmi.xml ( 28770 bytes, from 2015-11-03 11:09:10)
+- /local/mnt/workspace/source_trees/envytools/rnndb/../rnndb/hdmi/hdmi.xml ( 41472 bytes, from 2016-01-08 08:20:42)
- /local/mnt/workspace/source_trees/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2015-02-09 03:18:10)
-Copyright (C) 2013-2015 by the following authors:
+Copyright (C) 2013-2016 by the following authors:
- Rob Clark <robdclark@gmail.com> (robclark)
Permission is hereby granted, free of charge, to any person obtaining
@@ -834,5 +834,501 @@ static inline uint32_t HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(uint32_t val)
#define REG_HDMI_28nm_PHY_PLL_DEBUG_BUS_SEL 0x000000a0
+#define REG_HDMI_8996_PHY_CFG 0x00000000
+
+#define REG_HDMI_8996_PHY_PD_CTL 0x00000004
+
+#define REG_HDMI_8996_PHY_MODE 0x00000008
+
+#define REG_HDMI_8996_PHY_MISR_CLEAR 0x0000000c
+
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_CFG0 0x00000010
+
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_CFG1 0x00000014
+
+#define REG_HDMI_8996_PHY_TX0_TX1_PRBS_SEED_BYTE0 0x00000018
+
+#define REG_HDMI_8996_PHY_TX0_TX1_PRBS_SEED_BYTE1 0x0000001c
+
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_PATTERN0 0x00000020
+
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_PATTERN1 0x00000024
+
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_CFG0 0x00000028
+
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_CFG1 0x0000002c
+
+#define REG_HDMI_8996_PHY_TX2_TX3_PRBS_SEED_BYTE0 0x00000030
+
+#define REG_HDMI_8996_PHY_TX2_TX3_PRBS_SEED_BYTE1 0x00000034
+
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_PATTERN0 0x00000038
+
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_PATTERN1 0x0000003c
+
+#define REG_HDMI_8996_PHY_DEBUG_BUS_SEL 0x00000040
+
+#define REG_HDMI_8996_PHY_TXCAL_CFG0 0x00000044
+
+#define REG_HDMI_8996_PHY_TXCAL_CFG1 0x00000048
+
+#define REG_HDMI_8996_PHY_TX0_TX1_LANE_CTL 0x0000004c
+
+#define REG_HDMI_8996_PHY_TX2_TX3_LANE_CTL 0x00000050
+
+#define REG_HDMI_8996_PHY_LANE_BIST_CONFIG 0x00000054
+
+#define REG_HDMI_8996_PHY_CLOCK 0x00000058
+
+#define REG_HDMI_8996_PHY_MISC1 0x0000005c
+
+#define REG_HDMI_8996_PHY_MISC2 0x00000060
+
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_STATUS0 0x00000064
+
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_STATUS1 0x00000068
+
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_STATUS2 0x0000006c
+
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_STATUS0 0x00000070
+
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_STATUS1 0x00000074
+
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_STATUS2 0x00000078
+
+#define REG_HDMI_8996_PHY_PRE_MISR_STATUS0 0x0000007c
+
+#define REG_HDMI_8996_PHY_PRE_MISR_STATUS1 0x00000080
+
+#define REG_HDMI_8996_PHY_PRE_MISR_STATUS2 0x00000084
+
+#define REG_HDMI_8996_PHY_PRE_MISR_STATUS3 0x00000088
+
+#define REG_HDMI_8996_PHY_POST_MISR_STATUS0 0x0000008c
+
+#define REG_HDMI_8996_PHY_POST_MISR_STATUS1 0x00000090
+
+#define REG_HDMI_8996_PHY_POST_MISR_STATUS2 0x00000094
+
+#define REG_HDMI_8996_PHY_POST_MISR_STATUS3 0x00000098
+
+#define REG_HDMI_8996_PHY_STATUS 0x0000009c
+
+#define REG_HDMI_8996_PHY_MISC3_STATUS 0x000000a0
+
+#define REG_HDMI_8996_PHY_MISC4_STATUS 0x000000a4
+
+#define REG_HDMI_8996_PHY_DEBUG_BUS0 0x000000a8
+
+#define REG_HDMI_8996_PHY_DEBUG_BUS1 0x000000ac
+
+#define REG_HDMI_8996_PHY_DEBUG_BUS2 0x000000b0
+
+#define REG_HDMI_8996_PHY_DEBUG_BUS3 0x000000b4
+
+#define REG_HDMI_8996_PHY_PHY_REVISION_ID0 0x000000b8
+
+#define REG_HDMI_8996_PHY_PHY_REVISION_ID1 0x000000bc
+
+#define REG_HDMI_8996_PHY_PHY_REVISION_ID2 0x000000c0
+
+#define REG_HDMI_8996_PHY_PHY_REVISION_ID3 0x000000c4
+
+#define REG_HDMI_PHY_QSERDES_COM_ATB_SEL1 0x00000000
+
+#define REG_HDMI_PHY_QSERDES_COM_ATB_SEL2 0x00000004
+
+#define REG_HDMI_PHY_QSERDES_COM_FREQ_UPDATE 0x00000008
+
+#define REG_HDMI_PHY_QSERDES_COM_BG_TIMER 0x0000000c
+
+#define REG_HDMI_PHY_QSERDES_COM_SSC_EN_CENTER 0x00000010
+
+#define REG_HDMI_PHY_QSERDES_COM_SSC_ADJ_PER1 0x00000014
+
+#define REG_HDMI_PHY_QSERDES_COM_SSC_ADJ_PER2 0x00000018
+
+#define REG_HDMI_PHY_QSERDES_COM_SSC_PER1 0x0000001c
+
+#define REG_HDMI_PHY_QSERDES_COM_SSC_PER2 0x00000020
+
+#define REG_HDMI_PHY_QSERDES_COM_SSC_STEP_SIZE1 0x00000024
+
+#define REG_HDMI_PHY_QSERDES_COM_SSC_STEP_SIZE2 0x00000028
+
+#define REG_HDMI_PHY_QSERDES_COM_POST_DIV 0x0000002c
+
+#define REG_HDMI_PHY_QSERDES_COM_POST_DIV_MUX 0x00000030
+
+#define REG_HDMI_PHY_QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x00000034
+
+#define REG_HDMI_PHY_QSERDES_COM_CLK_ENABLE1 0x00000038
+
+#define REG_HDMI_PHY_QSERDES_COM_SYS_CLK_CTRL 0x0000003c
+
+#define REG_HDMI_PHY_QSERDES_COM_SYSCLK_BUF_ENABLE 0x00000040
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_EN 0x00000044
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_IVCO 0x00000048
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP1_MODE0 0x0000004c
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP2_MODE0 0x00000050
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP3_MODE0 0x00000054
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP1_MODE1 0x00000058
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP2_MODE1 0x0000005c
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP3_MODE1 0x00000060
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP1_MODE2 0x00000064
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_RSVD0 0x00000064
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP2_MODE2 0x00000068
+
+#define REG_HDMI_PHY_QSERDES_COM_EP_CLOCK_DETECT_CTRL 0x00000068
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP3_MODE2 0x0000006c
+
+#define REG_HDMI_PHY_QSERDES_COM_SYSCLK_DET_COMP_STATUS 0x0000006c
+
+#define REG_HDMI_PHY_QSERDES_COM_BG_TRIM 0x00000070
+
+#define REG_HDMI_PHY_QSERDES_COM_CLK_EP_DIV 0x00000074
+
+#define REG_HDMI_PHY_QSERDES_COM_CP_CTRL_MODE0 0x00000078
+
+#define REG_HDMI_PHY_QSERDES_COM_CP_CTRL_MODE1 0x0000007c
+
+#define REG_HDMI_PHY_QSERDES_COM_CP_CTRL_MODE2 0x00000080
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_RSVD1 0x00000080
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_RCTRL_MODE0 0x00000084
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_RCTRL_MODE1 0x00000088
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_RCTRL_MODE2 0x0000008c
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_RSVD2 0x0000008c
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_CCTRL_MODE0 0x00000090
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_CCTRL_MODE1 0x00000094
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_CCTRL_MODE2 0x00000098
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_RSVD3 0x00000098
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_CNTRL 0x0000009c
+
+#define REG_HDMI_PHY_QSERDES_COM_PHASE_SEL_CTRL 0x000000a0
+
+#define REG_HDMI_PHY_QSERDES_COM_PHASE_SEL_DC 0x000000a4
+
+#define REG_HDMI_PHY_QSERDES_COM_CORE_CLK_IN_SYNC_SEL 0x000000a8
+
+#define REG_HDMI_PHY_QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x000000a8
+
+#define REG_HDMI_PHY_QSERDES_COM_SYSCLK_EN_SEL 0x000000ac
+
+#define REG_HDMI_PHY_QSERDES_COM_CML_SYSCLK_SEL 0x000000b0
+
+#define REG_HDMI_PHY_QSERDES_COM_RESETSM_CNTRL 0x000000b4
+
+#define REG_HDMI_PHY_QSERDES_COM_RESETSM_CNTRL2 0x000000b8
+
+#define REG_HDMI_PHY_QSERDES_COM_RESTRIM_CTRL 0x000000bc
+
+#define REG_HDMI_PHY_QSERDES_COM_RESTRIM_CTRL2 0x000000c0
+
+#define REG_HDMI_PHY_QSERDES_COM_RESCODE_DIV_NUM 0x000000c4
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP_EN 0x000000c8
+
+#define REG_HDMI_PHY_QSERDES_COM_LOCK_CMP_CFG 0x000000cc
+
+#define REG_HDMI_PHY_QSERDES_COM_DEC_START_MODE0 0x000000d0
+
+#define REG_HDMI_PHY_QSERDES_COM_DEC_START_MODE1 0x000000d4
+
+#define REG_HDMI_PHY_QSERDES_COM_DEC_START_MODE2 0x000000d8
+
+#define REG_HDMI_PHY_QSERDES_COM_VCOCAL_DEADMAN_CTRL 0x000000d8
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START1_MODE0 0x000000dc
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START2_MODE0 0x000000e0
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START3_MODE0 0x000000e4
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START1_MODE1 0x000000e8
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START2_MODE1 0x000000ec
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START3_MODE1 0x000000f0
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START1_MODE2 0x000000f4
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_MINVAL1 0x000000f4
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START2_MODE2 0x000000f8
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_MINVAL2 0x000000f8
+
+#define REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START3_MODE2 0x000000fc
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_RSVD4 0x000000fc
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_INITVAL 0x00000100
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_EN 0x00000104
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x00000108
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x0000010c
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x00000110
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x00000114
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_GAIN0_MODE2 0x00000118
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_MAXVAL1 0x00000118
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_GAIN1_MODE2 0x0000011c
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_MAXVAL2 0x0000011c
+
+#define REG_HDMI_PHY_QSERDES_COM_RES_TRIM_CONTROL2 0x00000120
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_CTRL 0x00000124
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_MAP 0x00000128
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE1_MODE0 0x0000012c
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE2_MODE0 0x00000130
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE1_MODE1 0x00000134
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE2_MODE1 0x00000138
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE1_MODE2 0x0000013c
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_INITVAL1 0x0000013c
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE2_MODE2 0x00000140
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_INITVAL2 0x00000140
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_TIMER1 0x00000144
+
+#define REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_TIMER2 0x00000148
+
+#define REG_HDMI_PHY_QSERDES_COM_SAR 0x0000014c
+
+#define REG_HDMI_PHY_QSERDES_COM_SAR_CLK 0x00000150
+
+#define REG_HDMI_PHY_QSERDES_COM_SAR_CODE_OUT_STATUS 0x00000154
+
+#define REG_HDMI_PHY_QSERDES_COM_SAR_CODE_READY_STATUS 0x00000158
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_STATUS 0x0000015c
+
+#define REG_HDMI_PHY_QSERDES_COM_RESET_SM_STATUS 0x00000160
+
+#define REG_HDMI_PHY_QSERDES_COM_RESTRIM_CODE_STATUS 0x00000164
+
+#define REG_HDMI_PHY_QSERDES_COM_PLLCAL_CODE1_STATUS 0x00000168
+
+#define REG_HDMI_PHY_QSERDES_COM_PLLCAL_CODE2_STATUS 0x0000016c
+
+#define REG_HDMI_PHY_QSERDES_COM_BG_CTRL 0x00000170
+
+#define REG_HDMI_PHY_QSERDES_COM_CLK_SELECT 0x00000174
+
+#define REG_HDMI_PHY_QSERDES_COM_HSCLK_SEL 0x00000178
+
+#define REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_BINCODE_STATUS 0x0000017c
+
+#define REG_HDMI_PHY_QSERDES_COM_PLL_ANALOG 0x00000180
+
+#define REG_HDMI_PHY_QSERDES_COM_CORECLK_DIV 0x00000184
+
+#define REG_HDMI_PHY_QSERDES_COM_SW_RESET 0x00000188
+
+#define REG_HDMI_PHY_QSERDES_COM_CORE_CLK_EN 0x0000018c
+
+#define REG_HDMI_PHY_QSERDES_COM_C_READY_STATUS 0x00000190
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_CONFIG 0x00000194
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_RATE_OVERRIDE 0x00000198
+
+#define REG_HDMI_PHY_QSERDES_COM_SVS_MODE_CLK_SEL 0x0000019c
+
+#define REG_HDMI_PHY_QSERDES_COM_DEBUG_BUS0 0x000001a0
+
+#define REG_HDMI_PHY_QSERDES_COM_DEBUG_BUS1 0x000001a4
+
+#define REG_HDMI_PHY_QSERDES_COM_DEBUG_BUS2 0x000001a8
+
+#define REG_HDMI_PHY_QSERDES_COM_DEBUG_BUS3 0x000001ac
+
+#define REG_HDMI_PHY_QSERDES_COM_DEBUG_BUS_SEL 0x000001b0
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_MISC1 0x000001b4
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_MISC2 0x000001b8
+
+#define REG_HDMI_PHY_QSERDES_COM_CORECLK_DIV_MODE1 0x000001bc
+
+#define REG_HDMI_PHY_QSERDES_COM_CORECLK_DIV_MODE2 0x000001c0
+
+#define REG_HDMI_PHY_QSERDES_COM_CMN_RSVD5 0x000001c4
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_MODE_LANENO 0x00000000
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_INVERT 0x00000004
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_CLKBUF_ENABLE 0x00000008
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_CMN_CONTROL_ONE 0x0000000c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_CMN_CONTROL_TWO 0x00000010
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_CMN_CONTROL_THREE 0x00000014
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_EMP_POST1_LVL 0x00000018
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_POST2_EMPH 0x0000001c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_BOOST_LVL_UP_DN 0x00000020
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_HP_PD_ENABLES 0x00000024
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_IDLE_LVL_LARGE_AMP 0x00000028
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_DRV_LVL 0x0000002c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_DRV_LVL_OFFSET 0x00000030
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_RESET_TSYNC_EN 0x00000034
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PRE_STALL_LDO_BOOST_EN 0x00000038
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_BAND 0x0000003c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_SLEW_CNTL 0x00000040
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_INTERFACE_SELECT 0x00000044
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_LPB_EN 0x00000048
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_RES_CODE_LANE_TX 0x0000004c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_RES_CODE_LANE_RX 0x00000050
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_RES_CODE_LANE_OFFSET 0x00000054
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PERL_LENGTH1 0x00000058
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PERL_LENGTH2 0x0000005c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_SERDES_BYP_EN_OUT 0x00000060
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_DEBUG_BUS_SEL 0x00000064
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x00000068
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_POL_INV 0x0000006c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PARRATE_REC_DETECT_IDLE_EN 0x00000070
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_PATTERN1 0x00000074
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_PATTERN2 0x00000078
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_PATTERN3 0x0000007c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_PATTERN4 0x00000080
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_PATTERN5 0x00000084
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_PATTERN6 0x00000088
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_PATTERN7 0x0000008c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_PATTERN8 0x00000090
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_LANE_MODE 0x00000094
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_IDAC_CAL_LANE_MODE 0x00000098
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_IDAC_CAL_LANE_MODE_CONFIGURATION 0x0000009c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_ATB_SEL1 0x000000a0
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_ATB_SEL2 0x000000a4
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_RCV_DETECT_LVL 0x000000a8
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_RCV_DETECT_LVL_2 0x000000ac
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PRBS_SEED1 0x000000b0
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PRBS_SEED2 0x000000b4
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PRBS_SEED3 0x000000b8
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PRBS_SEED4 0x000000bc
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_RESET_GEN 0x000000c0
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_RESET_GEN_MUXES 0x000000c4
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TRAN_DRVR_EMP_EN 0x000000c8
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_INTERFACE_MODE 0x000000cc
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_CTRL 0x000000d0
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_ENCODED_OR_DATA 0x000000d4
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_GEAR_1_DIVIDER_BAND2 0x000000d8
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_GEAR_2_DIVIDER_BAND2 0x000000dc
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_GEAR_3_DIVIDER_BAND2 0x000000e0
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_GEAR_4_DIVIDER_BAND2 0x000000e4
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_GEAR_1_DIVIDER_BAND0_1 0x000000e8
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_GEAR_2_DIVIDER_BAND0_1 0x000000ec
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_GEAR_3_DIVIDER_BAND0_1 0x000000f0
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_PWM_GEAR_4_DIVIDER_BAND0_1 0x000000f4
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_VMODE_CTRL1 0x000000f8
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_VMODE_CTRL2 0x000000fc
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_ALOG_INTF_OBSV_CNTL 0x00000100
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_STATUS 0x00000104
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_ERROR_COUNT1 0x00000108
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_BIST_ERROR_COUNT2 0x0000010c
+
+#define REG_HDMI_PHY_QSERDES_TX_LX_TX_ALOG_INTF_OBSV 0x00000110
+
#endif /* HDMI_XML */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 12/13] drm/msm/hdmi: HDMI 8996 PHY/PLL support
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (10 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 11/13] drm/msm/hdmi: Update generated headers for hdmi 8996 phy Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 7:09 ` [PATCH 13/13] dt/bindings: drm/msm/hdmi: Add hdmi phy bindings Archit Taneja
12 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark; +Cc: linux-arm-msm, dri-devel, Archit Taneja
Add support for the HDMI PHY/PLL found in msm8996/apq8096.
Unlike the previous phys supported in the driver, this doesn't need
the powerup/powerdown ops. The PLL prepare/unprepare clock ops
enable/disable the phy itself.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/Makefile | 2 +-
drivers/gpu/drm/msm/hdmi/hdmi.h | 8 +
drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 5 +
drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c | 767 +++++++++++++++++++++++++++++++
4 files changed, 781 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c
diff --git a/drivers/gpu/drm/msm/hdmi/Makefile b/drivers/gpu/drm/msm/hdmi/Makefile
index 9f2040c..799dbca 100644
--- a/drivers/gpu/drm/msm/hdmi/Makefile
+++ b/drivers/gpu/drm/msm/hdmi/Makefile
@@ -3,4 +3,4 @@ ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
obj-y := hdmi.o hdmi_phy.o hdmi_audio.o hdmi_bridge.o hdmi_connector.o \
hdmi_hdcp.o hdmi_i2c.o hdmi_phy_8960.o hdmi_phy_8x60.o hdmi_phy_8x74.o
-obj-$(CONFIG_COMMON_CLK) += hdmi_pll_8960.o
+obj-$(CONFIG_COMMON_CLK) += hdmi_pll_8960.o hdmi_phy_8996.o
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 1f498b0..88557e5 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -147,6 +147,7 @@ enum hdmi_phy_type {
MSM_HDMI_PHY_8x60,
MSM_HDMI_PHY_8960,
MSM_HDMI_PHY_8x74,
+ MSM_HDMI_PHY_8996,
MSM_HDMI_PHY_MAX,
};
@@ -163,6 +164,7 @@ struct hdmi_phy_cfg {
extern const struct hdmi_phy_cfg hdmi_phy_8x60_cfg;
extern const struct hdmi_phy_cfg hdmi_phy_8960_cfg;
extern const struct hdmi_phy_cfg hdmi_phy_8x74_cfg;
+extern const struct hdmi_phy_cfg hdmi_phy_8996_cfg;
struct hdmi_phy {
struct platform_device *pdev;
@@ -192,11 +194,17 @@ void __exit hdmi_phy_driver_unregister(void);
#ifdef CONFIG_COMMON_CLK
int hdmi_pll_8960_init(struct platform_device *pdev);
+int hdmi_pll_8996_init(struct platform_device *pdev);
#else
int hdmi_pll_8960_init(struct platform_device *pdev);
{
return -ENODEV;
}
+
+int hdmi_pll_8996_init(struct platform_device *pdev)
+{
+ return -ENODEV;
+}
#endif
/*
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
index 54c4b37..ce981c1 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
@@ -127,6 +127,9 @@ static int hdmi_phy_pll_init(struct platform_device *pdev,
case MSM_HDMI_PHY_8960:
ret = hdmi_pll_8960_init(pdev);
break;
+ case MSM_HDMI_PHY_8996:
+ ret = hdmi_pll_8996_init(pdev);
+ break;
/*
* we don't have PLL support for these, don't report an error for now
*/
@@ -200,6 +203,8 @@ static const struct of_device_id hdmi_phy_dt_match[] = {
.data = &hdmi_phy_8960_cfg },
{ .compatible = "qcom,hdmi-phy-8x74",
.data = &hdmi_phy_8x74_cfg },
+ { .compatible = "qcom,hdmi-phy-8996",
+ .data = &hdmi_phy_8996_cfg },
{}
};
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c
new file mode 100644
index 0000000..ef206f34
--- /dev/null
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c
@@ -0,0 +1,767 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk-provider.h>
+
+#include "hdmi.h"
+
+#define HDMI_VCO_MAX_FREQ 12000000000UL
+#define HDMI_VCO_MIN_FREQ 8000000000UL
+
+#define HDMI_PCLK_MAX_FREQ 600000000
+#define HDMI_PCLK_MIN_FREQ 25000000
+
+#define HDMI_HIGH_FREQ_BIT_CLK_THRESHOLD 3400000000UL
+#define HDMI_DIG_FREQ_BIT_CLK_THRESHOLD 1500000000UL
+#define HDMI_MID_FREQ_BIT_CLK_THRESHOLD 750000000UL
+#define HDMI_CORECLK_DIV 5
+#define HDMI_DEFAULT_REF_CLOCK 19200000
+#define HDMI_PLL_CMP_CNT 1024
+
+#define HDMI_PLL_POLL_MAX_READS 100
+#define HDMI_PLL_POLL_TIMEOUT_US 150
+
+#define HDMI_NUM_TX_CHANNEL 4
+
+struct hdmi_pll_8996 {
+ struct platform_device *pdev;
+ struct clk_hw clk_hw;
+
+ /* pll mmio base */
+ void __iomem *mmio_qserdes_com;
+ /* tx channel base */
+ void __iomem *mmio_qserdes_tx[HDMI_NUM_TX_CHANNEL];
+};
+
+#define hw_clk_to_pll(x) container_of(x, struct hdmi_pll_8996, clk_hw)
+
+struct hdmi_8996_phy_pll_reg_cfg {
+ u32 tx_lx_lane_mode[HDMI_NUM_TX_CHANNEL];
+ u32 tx_lx_tx_band[HDMI_NUM_TX_CHANNEL];
+ u32 com_svs_mode_clk_sel;
+ u32 com_hsclk_sel;
+ u32 com_pll_cctrl_mode0;
+ u32 com_pll_rctrl_mode0;
+ u32 com_cp_ctrl_mode0;
+ u32 com_dec_start_mode0;
+ u32 com_div_frac_start1_mode0;
+ u32 com_div_frac_start2_mode0;
+ u32 com_div_frac_start3_mode0;
+ u32 com_integloop_gain0_mode0;
+ u32 com_integloop_gain1_mode0;
+ u32 com_lock_cmp_en;
+ u32 com_lock_cmp1_mode0;
+ u32 com_lock_cmp2_mode0;
+ u32 com_lock_cmp3_mode0;
+ u32 com_core_clk_en;
+ u32 com_coreclk_div;
+ u32 com_vco_tune_ctrl;
+
+ u32 tx_lx_tx_drv_lvl[HDMI_NUM_TX_CHANNEL];
+ u32 tx_lx_tx_emp_post1_lvl[HDMI_NUM_TX_CHANNEL];
+ u32 tx_lx_vmode_ctrl1[HDMI_NUM_TX_CHANNEL];
+ u32 tx_lx_vmode_ctrl2[HDMI_NUM_TX_CHANNEL];
+ u32 tx_lx_res_code_lane_tx[HDMI_NUM_TX_CHANNEL];
+ u32 tx_lx_hp_pd_enables[HDMI_NUM_TX_CHANNEL];
+
+ u32 phy_mode;
+};
+
+struct hdmi_8996_post_divider {
+ u64 vco_freq;
+ int hsclk_divsel;
+ int vco_ratio;
+ int tx_band_sel;
+ int half_rate_mode;
+};
+
+static inline struct hdmi_phy *pll_get_phy(struct hdmi_pll_8996 *pll)
+{
+ return platform_get_drvdata(pll->pdev);
+}
+
+static inline void hdmi_pll_write(struct hdmi_pll_8996 *pll, int offset,
+ u32 data)
+{
+ msm_writel(data, pll->mmio_qserdes_com + offset);
+}
+
+static inline u32 hdmi_pll_read(struct hdmi_pll_8996 *pll, int offset)
+{
+ return msm_readl(pll->mmio_qserdes_com + offset);
+}
+
+static inline void hdmi_tx_chan_write(struct hdmi_pll_8996 *pll, int channel,
+ int offset, int data)
+{
+ msm_writel(data, pll->mmio_qserdes_tx[channel] + offset);
+}
+
+static inline u32 pll_get_cpctrl(u64 frac_start, unsigned long ref_clk,
+ bool gen_ssc)
+{
+ if ((frac_start != 0) || gen_ssc)
+ return (11000000 / (ref_clk / 20));
+
+ return 0x23;
+}
+
+static inline u32 pll_get_rctrl(u64 frac_start, bool gen_ssc)
+{
+ if ((frac_start != 0) || gen_ssc)
+ return 0x16;
+
+ return 0x10;
+}
+
+static inline u32 pll_get_cctrl(u64 frac_start, bool gen_ssc)
+{
+ if ((frac_start != 0) || gen_ssc)
+ return 0x28;
+
+ return 0x1;
+}
+
+static inline u32 pll_get_integloop_gain(u64 frac_start, u64 bclk, u32 ref_clk,
+ bool gen_ssc)
+{
+ int digclk_divsel = bclk >= HDMI_DIG_FREQ_BIT_CLK_THRESHOLD ? 1 : 2;
+ u64 base;
+
+ if ((frac_start != 0) || gen_ssc)
+ base = (64 * ref_clk) / HDMI_DEFAULT_REF_CLOCK;
+ else
+ base = (1022 * ref_clk) / 100;
+
+ base <<= digclk_divsel;
+
+ return (base <= 2046 ? base : 2046);
+}
+
+static inline u32 pll_get_pll_cmp(u64 fdata, unsigned long ref_clk)
+{
+ u64 dividend = HDMI_PLL_CMP_CNT * fdata;
+ u32 divisor = ref_clk * 10;
+ u32 rem;
+
+ rem = do_div(dividend, divisor);
+ if (rem > (divisor >> 1))
+ dividend++;
+
+ return dividend - 1;
+}
+
+static inline u64 pll_cmp_to_fdata(u32 pll_cmp, unsigned long ref_clk)
+{
+ u64 fdata = ((u64)pll_cmp) * ref_clk * 10;
+
+ do_div(fdata, HDMI_PLL_CMP_CNT);
+
+ return fdata;
+}
+
+static int pll_get_post_div(struct hdmi_8996_post_divider *pd, u64 bclk)
+{
+ int ratio[] = { 2, 3, 4, 5, 6, 9, 10, 12, 14, 15, 20, 21, 25, 28, 35 };
+ int hs_divsel[] = { 0, 4, 8, 12, 1, 5, 2, 9, 3, 13, 10, 7, 14, 11, 15 };
+ int tx_band_sel[] = { 0, 1, 2, 3 };
+ u64 vco_freq[60];
+ u64 vco, vco_optimal;
+ int half_rate_mode = 0;
+ int vco_optimal_index, vco_freq_index;
+ int i, j;
+
+retry:
+ vco_optimal = HDMI_VCO_MAX_FREQ;
+ vco_optimal_index = -1;
+ vco_freq_index = 0;
+ for (i = 0; i < 15; i++) {
+ for (j = 0; j < 4; j++) {
+ u32 ratio_mult = ratio[i] << tx_band_sel[j];
+
+ vco = bclk >> half_rate_mode;
+ vco *= ratio_mult;
+ vco_freq[vco_freq_index++] = vco;
+ }
+ }
+
+ for (i = 0; i < 60; i++) {
+ u64 vco_tmp = vco_freq[i];
+
+ if ((vco_tmp >= HDMI_VCO_MIN_FREQ) &&
+ (vco_tmp <= vco_optimal)) {
+ vco_optimal = vco_tmp;
+ vco_optimal_index = i;
+ }
+ }
+
+ if (vco_optimal_index == -1) {
+ if (!half_rate_mode) {
+ half_rate_mode = 1;
+ goto retry;
+ }
+ } else {
+ pd->vco_freq = vco_optimal;
+ pd->tx_band_sel = tx_band_sel[vco_optimal_index % 4];
+ pd->vco_ratio = ratio[vco_optimal_index / 4];
+ pd->hsclk_divsel = hs_divsel[vco_optimal_index / 4];
+
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int pll_calculate(unsigned long pix_clk, unsigned long ref_clk,
+ struct hdmi_8996_phy_pll_reg_cfg *cfg)
+{
+ struct hdmi_8996_post_divider pd;
+ u64 bclk;
+ u64 tmds_clk;
+ u64 dec_start;
+ u64 frac_start;
+ u64 fdata;
+ u32 pll_divisor;
+ u32 rem;
+ u32 cpctrl;
+ u32 rctrl;
+ u32 cctrl;
+ u32 integloop_gain;
+ u32 pll_cmp;
+ int i, ret;
+
+ /* bit clk = 10 * pix_clk */
+ bclk = ((u64)pix_clk) * 10;
+
+ if (bclk > HDMI_HIGH_FREQ_BIT_CLK_THRESHOLD)
+ tmds_clk = pix_clk >> 2;
+ else
+ tmds_clk = pix_clk;
+
+ ret = pll_get_post_div(&pd, bclk);
+ if (ret)
+ return ret;
+
+ dec_start = pd.vco_freq;
+ pll_divisor = 4 * ref_clk;
+ do_div(dec_start, pll_divisor);
+
+ frac_start = pd.vco_freq * (1 << 20);
+
+ rem = do_div(frac_start, pll_divisor);
+ frac_start -= dec_start * (1 << 20);
+ if (rem > (pll_divisor >> 1))
+ frac_start++;
+
+ cpctrl = pll_get_cpctrl(frac_start, ref_clk, false);
+ rctrl = pll_get_rctrl(frac_start, false);
+ cctrl = pll_get_cctrl(frac_start, false);
+ integloop_gain = pll_get_integloop_gain(frac_start, bclk,
+ ref_clk, false);
+
+ fdata = pd.vco_freq;
+ do_div(fdata, pd.vco_ratio);
+
+ pll_cmp = pll_get_pll_cmp(fdata, ref_clk);
+
+ DBG("VCO freq: %llu", pd.vco_freq);
+ DBG("fdata: %llu", fdata);
+ DBG("pix_clk: %lu", pix_clk);
+ DBG("tmds clk: %llu", tmds_clk);
+ DBG("HSCLK_SEL: %d", pd.hsclk_divsel);
+ DBG("DEC_START: %llu", dec_start);
+ DBG("DIV_FRAC_START: %llu", frac_start);
+ DBG("PLL_CPCTRL: %u", cpctrl);
+ DBG("PLL_RCTRL: %u", rctrl);
+ DBG("PLL_CCTRL: %u", cctrl);
+ DBG("INTEGLOOP_GAIN: %u", integloop_gain);
+ DBG("TX_BAND: %d", pd.tx_band_sel);
+ DBG("PLL_CMP: %u", pll_cmp);
+
+ /* Convert these values to register specific values */
+ if (bclk > HDMI_DIG_FREQ_BIT_CLK_THRESHOLD)
+ cfg->com_svs_mode_clk_sel = 1;
+ else
+ cfg->com_svs_mode_clk_sel = 2;
+
+ cfg->com_hsclk_sel = (0x20 | pd.hsclk_divsel);
+ cfg->com_pll_cctrl_mode0 = cctrl;
+ cfg->com_pll_rctrl_mode0 = rctrl;
+ cfg->com_cp_ctrl_mode0 = cpctrl;
+ cfg->com_dec_start_mode0 = dec_start;
+ cfg->com_div_frac_start1_mode0 = (frac_start & 0xff);
+ cfg->com_div_frac_start2_mode0 = ((frac_start & 0xff00) >> 8);
+ cfg->com_div_frac_start3_mode0 = ((frac_start & 0xf0000) >> 16);
+ cfg->com_integloop_gain0_mode0 = (integloop_gain & 0xff);
+ cfg->com_integloop_gain1_mode0 = ((integloop_gain & 0xf00) >> 8);
+ cfg->com_lock_cmp1_mode0 = (pll_cmp & 0xff);
+ cfg->com_lock_cmp2_mode0 = ((pll_cmp & 0xff00) >> 8);
+ cfg->com_lock_cmp3_mode0 = ((pll_cmp & 0x30000) >> 16);
+ cfg->com_lock_cmp_en = 0x0;
+ cfg->com_core_clk_en = 0x2c;
+ cfg->com_coreclk_div = HDMI_CORECLK_DIV;
+ cfg->phy_mode = (bclk > HDMI_HIGH_FREQ_BIT_CLK_THRESHOLD) ? 0x10 : 0x0;
+ cfg->com_vco_tune_ctrl = 0x0;
+
+ cfg->tx_lx_lane_mode[0] =
+ cfg->tx_lx_lane_mode[2] = 0x43;
+
+ cfg->tx_lx_hp_pd_enables[0] =
+ cfg->tx_lx_hp_pd_enables[1] =
+ cfg->tx_lx_hp_pd_enables[2] = 0x0c;
+ cfg->tx_lx_hp_pd_enables[3] = 0x3;
+
+ for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++)
+ cfg->tx_lx_tx_band[i] = pd.tx_band_sel + 4;
+
+ if (bclk > HDMI_HIGH_FREQ_BIT_CLK_THRESHOLD) {
+ cfg->tx_lx_tx_drv_lvl[0] =
+ cfg->tx_lx_tx_drv_lvl[1] =
+ cfg->tx_lx_tx_drv_lvl[2] = 0x25;
+ cfg->tx_lx_tx_drv_lvl[3] = 0x22;
+
+ cfg->tx_lx_tx_emp_post1_lvl[0] =
+ cfg->tx_lx_tx_emp_post1_lvl[1] =
+ cfg->tx_lx_tx_emp_post1_lvl[2] = 0x23;
+ cfg->tx_lx_tx_emp_post1_lvl[3] = 0x27;
+
+ cfg->tx_lx_vmode_ctrl1[0] =
+ cfg->tx_lx_vmode_ctrl1[1] =
+ cfg->tx_lx_vmode_ctrl1[2] =
+ cfg->tx_lx_vmode_ctrl1[3] = 0x00;
+
+ cfg->tx_lx_vmode_ctrl2[0] =
+ cfg->tx_lx_vmode_ctrl2[1] =
+ cfg->tx_lx_vmode_ctrl2[2] = 0x0D;
+
+ cfg->tx_lx_vmode_ctrl2[3] = 0x00;
+ } else if (bclk > HDMI_MID_FREQ_BIT_CLK_THRESHOLD) {
+ for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+ cfg->tx_lx_tx_drv_lvl[i] = 0x25;
+ cfg->tx_lx_tx_emp_post1_lvl[i] = 0x23;
+ cfg->tx_lx_vmode_ctrl1[i] = 0x00;
+ }
+
+ cfg->tx_lx_vmode_ctrl2[0] =
+ cfg->tx_lx_vmode_ctrl2[1] =
+ cfg->tx_lx_vmode_ctrl2[2] = 0x0D;
+ cfg->tx_lx_vmode_ctrl2[3] = 0x00;
+ } else {
+ for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+ cfg->tx_lx_tx_drv_lvl[i] = 0x20;
+ cfg->tx_lx_tx_emp_post1_lvl[i] = 0x20;
+ cfg->tx_lx_vmode_ctrl1[i] = 0x00;
+ cfg->tx_lx_vmode_ctrl2[i] = 0x0E;
+ }
+ }
+
+ DBG("com_svs_mode_clk_sel = 0x%x", cfg->com_svs_mode_clk_sel);
+ DBG("com_hsclk_sel = 0x%x", cfg->com_hsclk_sel);
+ DBG("com_lock_cmp_en = 0x%x", cfg->com_lock_cmp_en);
+ DBG("com_pll_cctrl_mode0 = 0x%x", cfg->com_pll_cctrl_mode0);
+ DBG("com_pll_rctrl_mode0 = 0x%x", cfg->com_pll_rctrl_mode0);
+ DBG("com_cp_ctrl_mode0 = 0x%x", cfg->com_cp_ctrl_mode0);
+ DBG("com_dec_start_mode0 = 0x%x", cfg->com_dec_start_mode0);
+ DBG("com_div_frac_start1_mode0 = 0x%x", cfg->com_div_frac_start1_mode0);
+ DBG("com_div_frac_start2_mode0 = 0x%x", cfg->com_div_frac_start2_mode0);
+ DBG("com_div_frac_start3_mode0 = 0x%x", cfg->com_div_frac_start3_mode0);
+ DBG("com_integloop_gain0_mode0 = 0x%x", cfg->com_integloop_gain0_mode0);
+ DBG("com_integloop_gain1_mode0 = 0x%x", cfg->com_integloop_gain1_mode0);
+ DBG("com_lock_cmp1_mode0 = 0x%x", cfg->com_lock_cmp1_mode0);
+ DBG("com_lock_cmp2_mode0 = 0x%x", cfg->com_lock_cmp2_mode0);
+ DBG("com_lock_cmp3_mode0 = 0x%x", cfg->com_lock_cmp3_mode0);
+ DBG("com_core_clk_en = 0x%x", cfg->com_core_clk_en);
+ DBG("com_coreclk_div = 0x%x", cfg->com_coreclk_div);
+ DBG("phy_mode = 0x%x", cfg->phy_mode);
+
+ DBG("tx_l0_lane_mode = 0x%x", cfg->tx_lx_lane_mode[0]);
+ DBG("tx_l2_lane_mode = 0x%x", cfg->tx_lx_lane_mode[2]);
+
+ for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+ DBG("tx_l%d_tx_band = 0x%x", i, cfg->tx_lx_tx_band[i]);
+ DBG("tx_l%d_tx_drv_lvl = 0x%x", i, cfg->tx_lx_tx_drv_lvl[i]);
+ DBG("tx_l%d_tx_emp_post1_lvl = 0x%x", i,
+ cfg->tx_lx_tx_emp_post1_lvl[i]);
+ DBG("tx_l%d_vmode_ctrl1 = 0x%x", i, cfg->tx_lx_vmode_ctrl1[i]);
+ DBG("tx_l%d_vmode_ctrl2 = 0x%x", i, cfg->tx_lx_vmode_ctrl2[i]);
+ }
+
+ return 0;
+}
+
+static int hdmi_8996_pll_set_clk_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct hdmi_pll_8996 *pll = hw_clk_to_pll(hw);
+ struct hdmi_phy *phy = pll_get_phy(pll);
+ struct hdmi_8996_phy_pll_reg_cfg cfg;
+ int i, ret;
+
+ memset(&cfg, 0x00, sizeof(cfg));
+
+ ret = pll_calculate(rate, parent_rate, &cfg);
+ if (ret) {
+ DRM_ERROR("PLL calculation failed\n");
+ return ret;
+ }
+
+ /* Initially shut down PHY */
+ DBG("Disabling PHY");
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_PD_CTL, 0x0);
+ udelay(500);
+
+ /* Power up sequence */
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_BG_CTRL, 0x04);
+
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_PD_CTL, 0x1);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_RESETSM_CNTRL, 0x20);
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_TX0_TX1_LANE_CTL, 0x0F);
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_TX2_TX3_LANE_CTL, 0x0F);
+
+ for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_CLKBUF_ENABLE,
+ 0x03);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_TX_BAND,
+ cfg.tx_lx_tx_band[i]);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_RESET_TSYNC_EN,
+ 0x03);
+ }
+
+ hdmi_tx_chan_write(pll, 0, REG_HDMI_PHY_QSERDES_TX_LX_LANE_MODE,
+ cfg.tx_lx_lane_mode[0]);
+ hdmi_tx_chan_write(pll, 2, REG_HDMI_PHY_QSERDES_TX_LX_LANE_MODE,
+ cfg.tx_lx_lane_mode[2]);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1E);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x07);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SYSCLK_EN_SEL, 0x37);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SYS_CLK_CTRL, 0x02);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_CLK_ENABLE1, 0x0E);
+
+ /* Bypass VCO calibration */
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SVS_MODE_CLK_SEL,
+ cfg.com_svs_mode_clk_sel);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_BG_TRIM, 0x0F);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_PLL_IVCO, 0x0F);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_CTRL,
+ cfg.com_vco_tune_ctrl);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_BG_CTRL, 0x06);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_CLK_SELECT, 0x30);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_HSCLK_SEL,
+ cfg.com_hsclk_sel);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_LOCK_CMP_EN,
+ cfg.com_lock_cmp_en);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_PLL_CCTRL_MODE0,
+ cfg.com_pll_cctrl_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_PLL_RCTRL_MODE0,
+ cfg.com_pll_rctrl_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_CP_CTRL_MODE0,
+ cfg.com_cp_ctrl_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_DEC_START_MODE0,
+ cfg.com_dec_start_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START1_MODE0,
+ cfg.com_div_frac_start1_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START2_MODE0,
+ cfg.com_div_frac_start2_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_DIV_FRAC_START3_MODE0,
+ cfg.com_div_frac_start3_mode0);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_GAIN0_MODE0,
+ cfg.com_integloop_gain0_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_INTEGLOOP_GAIN1_MODE0,
+ cfg.com_integloop_gain1_mode0);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_LOCK_CMP1_MODE0,
+ cfg.com_lock_cmp1_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_LOCK_CMP2_MODE0,
+ cfg.com_lock_cmp2_mode0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_LOCK_CMP3_MODE0,
+ cfg.com_lock_cmp3_mode0);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_VCO_TUNE_MAP, 0x00);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_CORE_CLK_EN,
+ cfg.com_core_clk_en);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_CORECLK_DIV,
+ cfg.com_coreclk_div);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_CMN_CONFIG, 0x02);
+
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_RESCODE_DIV_NUM, 0x15);
+
+ /* TX lanes setup (TX 0/1/2/3) */
+ for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_TX_DRV_LVL,
+ cfg.tx_lx_tx_drv_lvl[i]);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_TX_EMP_POST1_LVL,
+ cfg.tx_lx_tx_emp_post1_lvl[i]);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_VMODE_CTRL1,
+ cfg.tx_lx_vmode_ctrl1[i]);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_VMODE_CTRL2,
+ cfg.tx_lx_vmode_ctrl2[i]);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_TX_DRV_LVL_OFFSET,
+ 0x00);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_RES_CODE_LANE_OFFSET,
+ 0x00);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_TRAN_DRVR_EMP_EN,
+ 0x03);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_PARRATE_REC_DETECT_IDLE_EN,
+ 0x40);
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_HP_PD_ENABLES,
+ cfg.tx_lx_hp_pd_enables[i]);
+ }
+
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_MODE, cfg.phy_mode);
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_PD_CTL, 0x1F);
+
+ /*
+ * Ensure that vco configuration gets flushed to hardware before
+ * enabling the PLL
+ */
+ wmb();
+
+ return 0;
+}
+
+static int hdmi_8996_phy_ready_status(struct hdmi_phy *phy)
+{
+ u32 nb_tries = HDMI_PLL_POLL_MAX_READS;
+ unsigned long timeout = HDMI_PLL_POLL_TIMEOUT_US;
+ u32 status;
+ int phy_ready = 0;
+
+ DBG("Waiting for PHY ready");
+
+ while (nb_tries--) {
+ status = hdmi_phy_read(phy, REG_HDMI_8996_PHY_STATUS);
+ phy_ready = status & BIT(0);
+
+ if (phy_ready)
+ break;
+
+ udelay(timeout);
+ }
+
+ DBG("PHY is %sready", phy_ready ? "" : "*not* ");
+
+ return phy_ready;
+}
+
+static int hdmi_8996_pll_lock_status(struct hdmi_pll_8996 *pll)
+{
+ u32 status;
+ int nb_tries = HDMI_PLL_POLL_MAX_READS;
+ unsigned long timeout = HDMI_PLL_POLL_TIMEOUT_US;
+ int pll_locked = 0;
+
+ DBG("Waiting for PLL lock");
+
+ while (nb_tries--) {
+ status = hdmi_pll_read(pll,
+ REG_HDMI_PHY_QSERDES_COM_C_READY_STATUS);
+ pll_locked = status & BIT(0);
+
+ if (pll_locked)
+ break;
+
+ udelay(timeout);
+ }
+
+ DBG("HDMI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+ return pll_locked;
+}
+
+static int hdmi_8996_pll_prepare(struct clk_hw *hw)
+{
+ struct hdmi_pll_8996 *pll = hw_clk_to_pll(hw);
+ struct hdmi_phy *phy = pll_get_phy(pll);
+ int i, ret = 0;
+
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x1);
+ udelay(100);
+
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x19);
+ udelay(100);
+
+ ret = hdmi_8996_pll_lock_status(pll);
+ if (!ret)
+ return ret;
+
+ for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++)
+ hdmi_tx_chan_write(pll, i,
+ REG_HDMI_PHY_QSERDES_TX_LX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN,
+ 0x6F);
+
+ /* Disable SSC */
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_PER1, 0x0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_PER2, 0x0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_STEP_SIZE1, 0x0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_STEP_SIZE2, 0x0);
+ hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_EN_CENTER, 0x2);
+
+ ret = hdmi_8996_phy_ready_status(phy);
+ if (!ret)
+ return ret;
+
+ /* Restart the retiming buffer */
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x18);
+ udelay(1);
+ hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x19);
+
+ return 0;
+}
+
+static long hdmi_8996_pll_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ if (rate < HDMI_PCLK_MIN_FREQ)
+ return HDMI_PCLK_MIN_FREQ;
+ else if (rate > HDMI_PCLK_MAX_FREQ)
+ return HDMI_PCLK_MAX_FREQ;
+ else
+ return rate;
+}
+
+static unsigned long hdmi_8996_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct hdmi_pll_8996 *pll = hw_clk_to_pll(hw);
+ u64 fdata;
+ u32 cmp1, cmp2, cmp3, pll_cmp;
+
+ cmp1 = hdmi_pll_read(pll, REG_HDMI_PHY_QSERDES_COM_LOCK_CMP1_MODE0);
+ cmp2 = hdmi_pll_read(pll, REG_HDMI_PHY_QSERDES_COM_LOCK_CMP2_MODE0);
+ cmp3 = hdmi_pll_read(pll, REG_HDMI_PHY_QSERDES_COM_LOCK_CMP3_MODE0);
+
+ pll_cmp = cmp1 | (cmp2 << 8) | (cmp3 << 16);
+
+ fdata = pll_cmp_to_fdata(pll_cmp + 1, parent_rate);
+
+ do_div(fdata, 10);
+
+ return fdata;
+}
+
+static void hdmi_8996_pll_unprepare(struct clk_hw *hw)
+{
+}
+
+static int hdmi_8996_pll_is_enabled(struct clk_hw *hw)
+{
+ struct hdmi_pll_8996 *pll = hw_clk_to_pll(hw);
+ u32 status;
+ int pll_locked;
+
+ status = hdmi_pll_read(pll, REG_HDMI_PHY_QSERDES_COM_C_READY_STATUS);
+ pll_locked = status & BIT(0);
+
+ return pll_locked;
+}
+
+static struct clk_ops hdmi_8996_pll_ops = {
+ .set_rate = hdmi_8996_pll_set_clk_rate,
+ .round_rate = hdmi_8996_pll_round_rate,
+ .recalc_rate = hdmi_8996_pll_recalc_rate,
+ .prepare = hdmi_8996_pll_prepare,
+ .unprepare = hdmi_8996_pll_unprepare,
+ .is_enabled = hdmi_8996_pll_is_enabled,
+};
+
+static const char * const hdmi_pll_parents[] = {
+ "xo",
+};
+
+static struct clk_init_data pll_init = {
+ .name = "hdmipll",
+ .ops = &hdmi_8996_pll_ops,
+ .parent_names = hdmi_pll_parents,
+ .num_parents = ARRAY_SIZE(hdmi_pll_parents),
+};
+
+int hdmi_pll_8996_init(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct hdmi_pll_8996 *pll;
+ struct clk *clk;
+ int i;
+
+ pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return -ENOMEM;
+
+ pll->pdev = pdev;
+
+ pll->mmio_qserdes_com = msm_ioremap(pdev, "hdmi_pll", "HDMI_PLL");
+ if (IS_ERR(pll->mmio_qserdes_com)) {
+ dev_err(dev, "failed to map pll base\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+ char name[32], label[32];
+
+ snprintf(name, sizeof(name), "hdmi_tx_l%d", i);
+ snprintf(label, sizeof(label), "HDMI_TX_L%d", i);
+
+ pll->mmio_qserdes_tx[i] = msm_ioremap(pdev, name, label);
+ if (IS_ERR(pll->mmio_qserdes_tx[i])) {
+ dev_err(dev, "failed to map pll base\n");
+ return -ENOMEM;
+ }
+ }
+ pll->clk_hw.init = &pll_init;
+
+ clk = devm_clk_register(dev, &pll->clk_hw);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to register pll clock\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const char * const hdmi_phy_8996_reg_names[] = {
+ "vddio",
+ "vcca",
+};
+
+static const char * const hdmi_phy_8996_clk_names[] = {
+ "mmagic_iface_clk",
+ "iface_clk",
+ "ref_clk",
+};
+
+const struct hdmi_phy_cfg hdmi_phy_8996_cfg = {
+ .type = MSM_HDMI_PHY_8996,
+ .reg_names = hdmi_phy_8996_reg_names,
+ .num_regs = ARRAY_SIZE(hdmi_phy_8996_reg_names),
+ .clk_names = hdmi_phy_8996_clk_names,
+ .num_clks = ARRAY_SIZE(hdmi_phy_8996_clk_names),
+};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 13/13] dt/bindings: drm/msm/hdmi: Add hdmi phy bindings
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
` (11 preceding siblings ...)
2016-01-21 7:09 ` [PATCH 12/13] drm/msm/hdmi: HDMI 8996 PHY/PLL support Archit Taneja
@ 2016-01-21 7:09 ` Archit Taneja
2016-01-21 23:26 ` Rob Herring
12 siblings, 1 reply; 16+ messages in thread
From: Archit Taneja @ 2016-01-21 7:09 UTC (permalink / raw)
To: robdclark
Cc: linux-arm-msm, dri-devel, Archit Taneja, devicetree, Rob Herring
Add hdmi phy bindings. Update the example to use hdmi phy.
Add a missing power-domains property in the hdmi core bindings.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
.../devicetree/bindings/display/msm/hdmi.txt | 39 +++++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index 379ee2e..21590ee 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -11,6 +11,7 @@ Required properties:
- reg: Physical base address and length of the controller's registers
- reg-names: "core_physical"
- interrupts: The interrupt signal from the hdmi block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
@@ -18,6 +19,7 @@ Required properties:
- qcom,hdmi-tx-hpd-gpio: hpd pin
- core-vdda-supply: phandle to supply regulator
- hdmi-mux-supply: phandle to mux regulator
+- qcom,dsi-phy: phandle to HDMI PHY device node
Optional properties:
- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
@@ -27,6 +29,27 @@ Optional properties:
- pinctrl-0: the default pinctrl state (active)
- pinctrl-1: the "sleep" pinctrl state
+HDMI PHY:
+Required properties:
+- compatible: Could be the following
+ * "qcom,hdmi-phy-8x60"
+ * "qcom,hdmi-phy-8960"
+ * "qcom,hdmi-phy-8x74"
+ * "qcom,hdmi-phy-8996"
+- reg: Physical base address and length of the registers of the PHY sub blocks.
+- reg-names: The names of register regions. The following regions are required:
+ * "hdmi_pll"
+ * "hdmi_phy"
+ For HDMI PHY on msm8996, these additional register regions are required:
+ * "hdmi_tx_l0"
+ * "hdmi_tx_l1"
+ * "hdmi_tx_l3"
+ * "hdmi_tx_l4"
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+ See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- core-vdda-supply: phandle to vdda regulator device node
+
Example:
/ {
@@ -35,7 +58,7 @@ Example:
hdmi: qcom,hdmi-tx-8960@4a00000 {
compatible = "qcom,hdmi-tx-8960";
reg-names = "core_physical";
- reg = <0x04a00000 0x1000>;
+ reg = <0x04a00000 0x2f0>;
interrupts = <GIC_SPI 79 0>;
power-domains = <&mmcc MDSS_GDSC>;
clock-names =
@@ -54,5 +77,19 @@ Example:
pinctrl-names = "default", "sleep";
pinctrl-0 = <&hpd_active &ddc_active &cec_active>;
pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+ qcom,hdmi-phy = <&hdmi_phy>;
+ };
+
+ hdmi_phy: qcom,hdmi-phy-8960@4a00400 {
+ compatible = "qcom,hdmi-phy-8960";
+ reg-names = "hdmi_phy",
+ "hdmi_pll";
+ reg = <0x4a00400 0x60>,
+ <0x4a00500 0x100>;
+ power-domains = <&mmcc MDSS_GDSC>;
+ clock-names = "slave_iface_clk";
+ clocks = <&mmcc HDMI_S_AHB_CLK>;
+ core-vdda-supply = <&pm8921_hdmi_mvs>;
};
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 13/13] dt/bindings: drm/msm/hdmi: Add hdmi phy bindings
2016-01-21 7:09 ` [PATCH 13/13] dt/bindings: drm/msm/hdmi: Add hdmi phy bindings Archit Taneja
@ 2016-01-21 23:26 ` Rob Herring
2016-01-25 7:40 ` Archit Taneja
0 siblings, 1 reply; 16+ messages in thread
From: Rob Herring @ 2016-01-21 23:26 UTC (permalink / raw)
To: Archit Taneja; +Cc: robdclark, linux-arm-msm, dri-devel, devicetree
On Thu, Jan 21, 2016 at 12:39:41PM +0530, Archit Taneja wrote:
> Add hdmi phy bindings. Update the example to use hdmi phy.
>
> Add a missing power-domains property in the hdmi core bindings.
>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh@kernel.org>
>
> Signed-off-by: Archit Taneja <architt@codeaurora.org>
> ---
> .../devicetree/bindings/display/msm/hdmi.txt | 39 +++++++++++++++++++++-
> 1 file changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
> index 379ee2e..21590ee 100644
> --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
> @@ -11,6 +11,7 @@ Required properties:
> - reg: Physical base address and length of the controller's registers
> - reg-names: "core_physical"
> - interrupts: The interrupt signal from the hdmi block.
> +- power-domains: Should be <&mmcc MDSS_GDSC>.
> - clocks: device clocks
> See ../clocks/clock-bindings.txt for details.
> - qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
> @@ -18,6 +19,7 @@ Required properties:
> - qcom,hdmi-tx-hpd-gpio: hpd pin
> - core-vdda-supply: phandle to supply regulator
> - hdmi-mux-supply: phandle to mux regulator
> +- qcom,dsi-phy: phandle to HDMI PHY device node
dsi?
Why does this not use the phy binding?
Rob
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 13/13] dt/bindings: drm/msm/hdmi: Add hdmi phy bindings
2016-01-21 23:26 ` Rob Herring
@ 2016-01-25 7:40 ` Archit Taneja
0 siblings, 0 replies; 16+ messages in thread
From: Archit Taneja @ 2016-01-25 7:40 UTC (permalink / raw)
To: Rob Herring
Cc: robdclark-Re5JQEeQqe8AvxtiuMwx3w,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
devicetree-u79uwXL29TY76Z2rM5mHXA
On 1/22/2016 4:56 AM, Rob Herring wrote:
> On Thu, Jan 21, 2016 at 12:39:41PM +0530, Archit Taneja wrote:
>> Add hdmi phy bindings. Update the example to use hdmi phy.
>>
>> Add a missing power-domains property in the hdmi core bindings.
>>
>> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>>
>> Signed-off-by: Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
>> ---
>> .../devicetree/bindings/display/msm/hdmi.txt | 39 +++++++++++++++++++++-
>> 1 file changed, 38 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
>> index 379ee2e..21590ee 100644
>> --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
>> +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
>> @@ -11,6 +11,7 @@ Required properties:
>> - reg: Physical base address and length of the controller's registers
>> - reg-names: "core_physical"
>> - interrupts: The interrupt signal from the hdmi block.
>> +- power-domains: Should be <&mmcc MDSS_GDSC>.
>> - clocks: device clocks
>> See ../clocks/clock-bindings.txt for details.
>> - qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
>> @@ -18,6 +19,7 @@ Required properties:
>> - qcom,hdmi-tx-hpd-gpio: hpd pin
>> - core-vdda-supply: phandle to supply regulator
>> - hdmi-mux-supply: phandle to mux regulator
>> +- qcom,dsi-phy: phandle to HDMI PHY device node
>
> dsi?
Sorry, this is a typo. It should be qcom,hdmi-phy.
>
> Why does this not use the phy binding?
The PHY in the HDMI and DSI blocks can't be implemented using the
common phy framework. The PHY blocks have a PLL sub-block within
them which acts as a pixel clock source for the display processor
block.
This dependency causes the need to split the phy power on sequence
into 2 parts (one to enable resources to enable the PLL, and the
other to enable the phy itself), which the phy framework can't
do. That's the main reason not to use it. There are some more
complex use cases for DSI PHY (drive two PHYs with the same
DSI PLL) which the phy framework can't support.
Thanks,
Archit
>
> Rob
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2016-01-25 7:40 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-21 7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
2016-01-21 7:09 ` [PATCH 01/13] drm/msm/dsi: Create separate Makefile/Kconfig Archit Taneja
2016-01-21 7:09 ` [PATCH 02/13] drm/msm/hdmi: " Archit Taneja
2016-01-21 7:09 ` [PATCH 03/13] drm/msm/edp: " Archit Taneja
2016-01-21 7:09 ` [PATCH 04/13] drm/msm/hdmi: Clean up connector gpio usage Archit Taneja
2016-01-21 7:09 ` [PATCH 05/13] drm/msm/hdmi: Fix connector detect when there is no hpd gpio Archit Taneja
2016-01-21 7:09 ` [PATCH 06/13] drm/msm/hdmi: Update generated headers to split PHY/PLL offsets Archit Taneja
2016-01-21 7:09 ` [PATCH 07/13] drm/msm/hdmi: Create a separate hdmi phy driver Archit Taneja
2016-01-21 7:09 ` [PATCH 08/13] drm/msm/hdmi: Make hdmi core get its phy Archit Taneja
2016-01-21 7:09 ` [PATCH 09/13] drm/msm/hdmi: Manage hdmi PLL through phy driver Archit Taneja
2016-01-21 7:09 ` [PATCH 10/13] drm/msm/hdmi: Convert phy files according to new design Archit Taneja
2016-01-21 7:09 ` [PATCH 11/13] drm/msm/hdmi: Update generated headers for hdmi 8996 phy Archit Taneja
2016-01-21 7:09 ` [PATCH 12/13] drm/msm/hdmi: HDMI 8996 PHY/PLL support Archit Taneja
2016-01-21 7:09 ` [PATCH 13/13] dt/bindings: drm/msm/hdmi: Add hdmi phy bindings Archit Taneja
2016-01-21 23:26 ` Rob Herring
2016-01-25 7:40 ` Archit Taneja
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).