dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, p.zabel@pengutronix.de,
	mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
	thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
	daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org,
	andy.shevchenko@gmail.com, noralf@tronnes.org,
	linus.walleij@linaro.org, broonie@kernel.org
Cc: devicetree@vger.kernel.org, dillonhua@gmail.com,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-spi@vger.kernel.org,
	dillon min <dillon.minfei@gmail.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/9] Enable ili9341 and l3gd20 on stm32f429-disco
Date: Wed, 27 May 2020 15:27:24 +0800	[thread overview]
Message-ID: <1590564453-24499-1-git-send-email-dillon.minfei@gmail.com> (raw)

From: dillon min <dillon.minfei@gmail.com>

V6:
1 separate '[PATCH v5 5/8]' patchs to two, each one has a Fixes tags according
  to Stephen Boyd's suggestion
2 fix panel-ilitek-ili9341 compile warning 'warning: Function parameter or
  member xxx not described in xxx' with W=1

V5's update based on Mark Brown's suggestion, use 'SPI_MASTER_MUST_RX'
for SPI_SIMPLEX_RX mode on stm32 spi controller.

V5:
1 instead of add send dummy data out under SIMPLEX_RX mode,
  add flags 'SPI_CONTROLLER_MUST_TX' for stm32 spi driver
2 bypass 'SPI_CONTROLLER_MUST_TX' and 'SPI_CONTROLLER_MUST_RX' under
  'SPI_3WIRE' mode

V4:
  According to alexandre torgue's suggestion, combine ili9341 and
  l3gd20's modification on stm32f429-disco board to one patchset.

Changes:

ili9341:

1 update ili9341 panel driver according to Linus's suggestion
2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
3 merge l3gd20's change to this patchset

V3:
1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
  to support serial spi & parallel rgb interface in one driver.
2 update ilitek,ili9341.yaml dts binding documentation.
3 update stm32f429-disco dts binding

V2:
1 verify ilitek,ili9341.yaml with make O=../linux-stm32
  dt_binding_check
  DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
  ilitek,ili9341.yaml

V1:
1 add ili9341 drm panel driver
2 add ltdc, spi5 controller for stm32f429-disco
3 add ltdc, spi5 pin map for stm32f429-disco
4 add docs about ili9341
5 fix ltdc driver loading hang in clk set rate bug


L3gd20:

V3:
1 merge stm32f429-disco dtbs binding with ili9341 part

V2:
1 insert blank line at stm32f420-disco.dts line 143
2 add more description for l3gd20 in commit message

V1:
1 enable spi5 controller on stm32f429-disco (dts)
2 add spi5 pinmap for stm32f429-disco  (dts)
3 add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4


dillon min (9):
  ARM: dts: stm32: Add dma config for spi5
  ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
  ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on    
    stm32429-disco board
  dt-bindings: display: panel: Add ilitek ili9341 panel bindings
  clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate
  clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after
    kernel     startup
  drm/panel: Add ilitek ili9341 panel driver
  spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
    be     coexit with 'SPI_3WIRE' mode

 .../bindings/display/panel/ilitek,ili9341.yaml     |   69 ++
 arch/arm/boot/dts/stm32f4-pinctrl.dtsi             |   67 +
 arch/arm/boot/dts/stm32f429-disco.dts              |   48 +
 arch/arm/boot/dts/stm32f429.dtsi                   |    3 +
 drivers/clk/clk-stm32f4.c                          |    7 +-
 drivers/gpu/drm/panel/Kconfig                      |   12 +
 drivers/gpu/drm/panel/Makefile                     |    1 +
 drivers/gpu/drm/panel/panel-ilitek-ili9341.c       | 1288 ++++++++++++++++++++
 drivers/spi/spi-stm32.c                            |   19 +-
 drivers/spi/spi.c                                  |    3 +-
 10 files changed, 1508 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c

-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2020-05-28  7:44 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-27  7:27 dillon.minfei [this message]
2020-05-27  7:27 ` [PATCH v6 1/9] ARM: dts: stm32: Add dma config for spi5 dillon.minfei
2020-05-27  7:27 ` [PATCH v6 2/9] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board dillon.minfei
2020-06-15  9:45   ` Alexandre Torgue
2020-06-15 10:05     ` dillon min
2020-05-27  7:27 ` [PATCH v6 3/9] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board dillon.minfei
2020-05-27  7:27 ` [PATCH v6 4/9] dt-bindings: display: panel: Add ilitek ili9341 panel bindings dillon.minfei
2020-05-29 16:17   ` Rob Herring
2020-05-27  7:27 ` [PATCH v6 5/9] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate dillon.minfei
2020-05-27  8:35   ` Stephen Boyd
2021-03-10 11:43     ` dillon min
2020-05-27  7:27 ` [PATCH v6 6/9] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup dillon.minfei
2020-05-27  8:35   ` Stephen Boyd
2021-03-10 11:43     ` dillon min
2020-05-27  7:27 ` [PATCH v6 7/9] drm/panel: Add ilitek ili9341 panel driver dillon.minfei
2020-05-27  7:27 ` [PATCH v6 8/9] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 dillon.minfei
2020-05-27  9:51   ` Mark Brown
2020-05-27 10:45     ` dillon min
2020-05-27 11:18       ` Mark Brown
2020-05-27  7:27 ` [PATCH v6 9/9] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode dillon.minfei
2020-06-15  8:49 ` [PATCH v6 0/9] Enable ili9341 and l3gd20 on stm32f429-disco Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1590564453-24499-1-git-send-email-dillon.minfei@gmail.com \
    --to=dillon.minfei@gmail.com \
    --cc=airlied@linux.ie \
    --cc=alexandre.torgue@st.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=broonie@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dillonhua@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=noralf@tronnes.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=sboyd@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).