[PATCH v6] support gce on mt6779 platform

[PATCH v6] support gce on mt6779 platform

[Dennis YC Hsieh]

This patch support gce on mt6779 platform.

Change since v5:
- spearate address shift code in client helper and mailbox controller
- separate write_s/write_s_mask and write_s_value/write_s_mask_value so that
  client can decide use mask or not
- fix typo in header

Change since v4:
- do not clear disp event again in drm driver
- symbolize value 1 to jump relative

[... snip ...]



Dennis YC Hsieh (16):
  dt-binding: gce: add gce header file for mt6779
  mailbox: cmdq: variablize address shift in platform
  mailbox: cmdq: support mt6779 gce platform definition
  mailbox: mediatek: cmdq: clear task in channel before shutdown
  soc: mediatek: cmdq: return send msg error code
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: cmdq: add assign function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: export finalize function
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add set event function

 .../devicetree/bindings/mailbox/mtk-gce.txt   |   8 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |   3 +-
 drivers/mailbox/mtk-cmdq-mailbox.c            | 101 ++++++--
 drivers/soc/mediatek/mtk-cmdq-helper.c        | 163 ++++++++++++-
 include/dt-bindings/gce/mt6779-gce.h          | 222 ++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h      |  10 +-
 include/linux/soc/mediatek/mtk-cmdq.h         | 125 +++++++++-
 7 files changed, 599 insertions(+), 33 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt6779-gce.h

-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 00/16] support gce on mt6779 platform

[Dennis YC Hsieh]

This patch support gce on mt6779 platform.

Change since v5:
- spearate address shift code in client helper and mailbox controller
- separate write_s/write_s_mask and write_s_value/write_s_mask_value so that
  client can decide use mask or not
- fix typo in header

Change since v4:
- do not clear disp event again in drm driver
- symbolize value 1 to jump relative

[... snip ...]

*** BLURB HERE ***

Dennis YC Hsieh (16):
  dt-binding: gce: add gce header file for mt6779
  mailbox: cmdq: variablize address shift in platform
  mailbox: cmdq: support mt6779 gce platform definition
  mailbox: mediatek: cmdq: clear task in channel before shutdown
  soc: mediatek: cmdq: return send msg error code
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: cmdq: add assign function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: export finalize function
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add set event function

 .../devicetree/bindings/mailbox/mtk-gce.txt   |   8 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |   3 +-
 drivers/mailbox/mtk-cmdq-mailbox.c            | 101 ++++++--
 drivers/soc/mediatek/mtk-cmdq-helper.c        | 163 ++++++++++++-
 include/dt-bindings/gce/mt6779-gce.h          | 222 ++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h      |  10 +-
 include/linux/soc/mediatek/mtk-cmdq.h         | 125 +++++++++-
 7 files changed, 599 insertions(+), 33 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt6779-gce.h

-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 01/16] dt-binding: gce: add gce header file for mt6779

[Dennis YC Hsieh]

Add documentation for the mt6779 gce.

Add gce header file defined the gce hardware event,
subsys number and constant for mt6779.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 .../devicetree/bindings/mailbox/mtk-gce.txt   |   8 +-
 include/dt-bindings/gce/mt6779-gce.h          | 222 ++++++++++++++++++
 2 files changed, 227 insertions(+), 3 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt6779-gce.h

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 7b13787ab13d..82c0a83fed09 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -9,7 +9,8 @@ CMDQ driver uses mailbox framework for communication. Please refer to
 mailbox.txt for generic information about mailbox device-tree bindings.
 
 Required properties:
-- compatible: can be "mediatek,mt8173-gce" or "mediatek,mt8183-gce"
+- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce" or
+  "mediatek,mt6779-gce".
 - reg: Address range of the GCE unit
 - interrupts: The interrupt signal from the GCE block
 - clock: Clocks according to the common clock binding
@@ -36,8 +37,9 @@ Optional properties for a client device:
   start_offset: the start offset of register address that GCE can access.
   size: the total size of register address that GCE can access.
 
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
-or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
+Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h',
+'dt-binding/gce/mt8183-gce.h' or 'dt-bindings/gce/mt6779-gce.h'. Such as
+sub-system ids, thread priority, event ids.
 
 Example:
 
diff --git a/include/dt-bindings/gce/mt6779-gce.h b/include/dt-bindings/gce/mt6779-gce.h
new file mode 100644
index 000000000000..06101316ace4
--- /dev/null
+++ b/include/dt-bindings/gce/mt6779-gce.h
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Dennis-YC Hsieh <dennis-yc.hsieh@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_GCE_MT6779_H
+#define _DT_BINDINGS_GCE_MT6779_H
+
+#define CMDQ_NO_TIMEOUT		0xffffffff
+
+/* GCE HW thread priority */
+#define CMDQ_THR_PRIO_LOWEST	0
+#define CMDQ_THR_PRIO_1		1
+#define CMDQ_THR_PRIO_2		2
+#define CMDQ_THR_PRIO_3		3
+#define CMDQ_THR_PRIO_4		4
+#define CMDQ_THR_PRIO_5		5
+#define CMDQ_THR_PRIO_6		6
+#define CMDQ_THR_PRIO_HIGHEST	7
+
+/* GCE subsys table */
+#define SUBSYS_1300XXXX		0
+#define SUBSYS_1400XXXX		1
+#define SUBSYS_1401XXXX		2
+#define SUBSYS_1402XXXX		3
+#define SUBSYS_1502XXXX		4
+#define SUBSYS_1880XXXX		5
+#define SUBSYS_1881XXXX		6
+#define SUBSYS_1882XXXX		7
+#define SUBSYS_1883XXXX		8
+#define SUBSYS_1884XXXX		9
+#define SUBSYS_1000XXXX		10
+#define SUBSYS_1001XXXX		11
+#define SUBSYS_1002XXXX		12
+#define SUBSYS_1003XXXX		13
+#define SUBSYS_1004XXXX		14
+#define SUBSYS_1005XXXX		15
+#define SUBSYS_1020XXXX		16
+#define SUBSYS_1028XXXX		17
+#define SUBSYS_1700XXXX		18
+#define SUBSYS_1701XXXX		19
+#define SUBSYS_1702XXXX		20
+#define SUBSYS_1703XXXX		21
+#define SUBSYS_1800XXXX		22
+#define SUBSYS_1801XXXX		23
+#define SUBSYS_1802XXXX		24
+#define SUBSYS_1804XXXX		25
+#define SUBSYS_1805XXXX		26
+#define SUBSYS_1808XXXX		27
+#define SUBSYS_180aXXXX		28
+#define SUBSYS_180bXXXX		29
+#define CMDQ_SUBSYS_OFF		32
+
+/* GCE hardware events */
+#define CMDQ_EVENT_DISP_RDMA0_SOF		0
+#define CMDQ_EVENT_DISP_RDMA1_SOF		1
+#define CMDQ_EVENT_MDP_RDMA0_SOF		2
+#define CMDQ_EVENT_MDP_RDMA1_SOF		3
+#define CMDQ_EVENT_MDP_RSZ0_SOF			4
+#define CMDQ_EVENT_MDP_RSZ1_SOF			5
+#define CMDQ_EVENT_MDP_TDSHP_SOF		6
+#define CMDQ_EVENT_MDP_WROT0_SOF		7
+#define CMDQ_EVENT_MDP_WROT1_SOF		8
+#define CMDQ_EVENT_DISP_OVL0_SOF		9
+#define CMDQ_EVENT_DISP_2L_OVL0_SOF		10
+#define CMDQ_EVENT_DISP_2L_OVL1_SOF		11
+#define CMDQ_EVENT_DISP_WDMA0_SOF		12
+#define CMDQ_EVENT_DISP_COLOR0_SOF		13
+#define CMDQ_EVENT_DISP_CCORR0_SOF		14
+#define CMDQ_EVENT_DISP_AAL0_SOF		15
+#define CMDQ_EVENT_DISP_GAMMA0_SOF		16
+#define CMDQ_EVENT_DISP_DITHER0_SOF		17
+#define CMDQ_EVENT_DISP_PWM0_SOF		18
+#define CMDQ_EVENT_DISP_DSI0_SOF		19
+#define CMDQ_EVENT_DISP_DPI0_SOF		20
+#define CMDQ_EVENT_DISP_POSTMASK0_SOF		21
+#define CMDQ_EVENT_DISP_RSZ0_SOF		22
+#define CMDQ_EVENT_MDP_AAL_SOF			23
+#define CMDQ_EVENT_MDP_CCORR_SOF		24
+#define CMDQ_EVENT_DISP_DBI0_SOF		25
+#define CMDQ_EVENT_ISP_RELAY_SOF		26
+#define CMDQ_EVENT_IPU_RELAY_SOF		27
+#define CMDQ_EVENT_DISP_RDMA0_EOF		28
+#define CMDQ_EVENT_DISP_RDMA1_EOF		29
+#define CMDQ_EVENT_MDP_RDMA0_EOF		30
+#define CMDQ_EVENT_MDP_RDMA1_EOF		31
+#define CMDQ_EVENT_MDP_RSZ0_EOF			32
+#define CMDQ_EVENT_MDP_RSZ1_EOF			33
+#define CMDQ_EVENT_MDP_TDSHP_EOF		34
+#define CMDQ_EVENT_MDP_WROT0_W_EOF		35
+#define CMDQ_EVENT_MDP_WROT1_W_EOF		36
+#define CMDQ_EVENT_DISP_OVL0_EOF		37
+#define CMDQ_EVENT_DISP_2L_OVL0_EOF		38
+#define CMDQ_EVENT_DISP_2L_OVL1_EOF		39
+#define CMDQ_EVENT_DISP_WDMA0_EOF		40
+#define CMDQ_EVENT_DISP_COLOR0_EOF		41
+#define CMDQ_EVENT_DISP_CCORR0_EOF		42
+#define CMDQ_EVENT_DISP_AAL0_EOF		43
+#define CMDQ_EVENT_DISP_GAMMA0_EOF		44
+#define CMDQ_EVENT_DISP_DITHER0_EOF		45
+#define CMDQ_EVENT_DISP_DSI0_EOF		46
+#define CMDQ_EVENT_DISP_DPI0_EOF		47
+#define CMDQ_EVENT_DISP_RSZ0_EOF		49
+#define CMDQ_EVENT_MDP_AAL_FRAME_DONE		50
+#define CMDQ_EVENT_MDP_CCORR_FRAME_DONE		51
+#define CMDQ_EVENT_DISP_POSTMASK0_FRAME_DONE	52
+#define CMDQ_EVENT_MUTEX0_STREAM_EOF		130
+#define CMDQ_EVENT_MUTEX1_STREAM_EOF		131
+#define CMDQ_EVENT_MUTEX2_STREAM_EOF		132
+#define CMDQ_EVENT_MUTEX3_STREAM_EOF		133
+#define CMDQ_EVENT_MUTEX4_STREAM_EOF		134
+#define CMDQ_EVENT_MUTEX5_STREAM_EOF		135
+#define CMDQ_EVENT_MUTEX6_STREAM_EOF		136
+#define CMDQ_EVENT_MUTEX7_STREAM_EOF		137
+#define CMDQ_EVENT_MUTEX8_STREAM_EOF		138
+#define CMDQ_EVENT_MUTEX9_STREAM_EOF		139
+#define CMDQ_EVENT_MUTEX10_STREAM_EOF		140
+#define CMDQ_EVENT_MUTEX11_STREAM_EOF		141
+#define CMDQ_EVENT_DISP_RDMA0_UNDERRUN		142
+#define CMDQ_EVENT_DISP_RDMA1_UNDERRUN		143
+#define CMDQ_EVENT_DISP_RDMA2_UNDERRUN		144
+#define CMDQ_EVENT_DISP_RDMA3_UNDERRUN		145
+#define CMDQ_EVENT_DSI0_TE			146
+#define CMDQ_EVENT_DSI0_IRQ_EVENT		147
+#define CMDQ_EVENT_DSI0_DONE_EVENT		148
+#define CMDQ_EVENT_DISP_POSTMASK0_RST_DONE	150
+#define CMDQ_EVENT_DISP_WDMA0_RST_DONE		151
+#define CMDQ_EVENT_MDP_WROT0_RST_DONE		153
+#define CMDQ_EVENT_MDP_RDMA0_RST_DONE		154
+#define CMDQ_EVENT_DISP_OVL0_RST_DONE		155
+#define CMDQ_EVENT_DISP_OVL0_2L_RST_DONE	156
+#define CMDQ_EVENT_DISP_OVL1_2L_RST_DONE	157
+#define CMDQ_EVENT_DIP_CQ_THREAD0_EOF		257
+#define CMDQ_EVENT_DIP_CQ_THREAD1_EOF		258
+#define CMDQ_EVENT_DIP_CQ_THREAD2_EOF		259
+#define CMDQ_EVENT_DIP_CQ_THREAD3_EOF		260
+#define CMDQ_EVENT_DIP_CQ_THREAD4_EOF		261
+#define CMDQ_EVENT_DIP_CQ_THREAD5_EOF		262
+#define CMDQ_EVENT_DIP_CQ_THREAD6_EOF		263
+#define CMDQ_EVENT_DIP_CQ_THREAD7_EOF		264
+#define CMDQ_EVENT_DIP_CQ_THREAD8_EOF		265
+#define CMDQ_EVENT_DIP_CQ_THREAD9_EOF		266
+#define CMDQ_EVENT_DIP_CQ_THREAD10_EOF		267
+#define CMDQ_EVENT_DIP_CQ_THREAD11_EOF		268
+#define CMDQ_EVENT_DIP_CQ_THREAD12_EOF		269
+#define CMDQ_EVENT_DIP_CQ_THREAD13_EOF		270
+#define CMDQ_EVENT_DIP_CQ_THREAD14_EOF		271
+#define CMDQ_EVENT_DIP_CQ_THREAD15_EOF		272
+#define CMDQ_EVENT_DIP_CQ_THREAD16_EOF		273
+#define CMDQ_EVENT_DIP_CQ_THREAD17_EOF		274
+#define CMDQ_EVENT_DIP_CQ_THREAD18_EOF		275
+#define CMDQ_EVENT_DIP_DMA_ERR_EVENT		276
+#define CMDQ_EVENT_AMD_FRAME_DONE		277
+#define CMDQ_EVENT_MFB_DONE			278
+#define CMDQ_EVENT_WPE_A_EOF			279
+#define CMDQ_EVENT_VENC_EOF			289
+#define CMDQ_EVENT_VENC_CMDQ_PAUSE_DONE		290
+#define CMDQ_EVENT_JPEG_ENC_EOF			291
+#define CMDQ_EVENT_VENC_MB_DONE			292
+#define CMDQ_EVENT_VENC_128BYTE_CNT_DONE	293
+#define CMDQ_EVENT_ISP_FRAME_DONE_A		321
+#define CMDQ_EVENT_ISP_FRAME_DONE_B		322
+#define CMDQ_EVENT_ISP_FRAME_DONE_C		323
+#define CMDQ_EVENT_ISP_CAMSV_0_PASS1_DONE	324
+#define CMDQ_EVENT_ISP_CAMSV_0_2_PASS1_DONE	325
+#define CMDQ_EVENT_ISP_CAMSV_1_PASS1_DONE	326
+#define CMDQ_EVENT_ISP_CAMSV_2_PASS1_DONE	327
+#define CMDQ_EVENT_ISP_CAMSV_3_PASS1_DONE	328
+#define CMDQ_EVENT_ISP_TSF_DONE			329
+#define CMDQ_EVENT_SENINF_0_FIFO_FULL		330
+#define CMDQ_EVENT_SENINF_1_FIFO_FULL		331
+#define CMDQ_EVENT_SENINF_2_FIFO_FULL		332
+#define CMDQ_EVENT_SENINF_3_FIFO_FULL		333
+#define CMDQ_EVENT_SENINF_4_FIFO_FULL		334
+#define CMDQ_EVENT_SENINF_5_FIFO_FULL		335
+#define CMDQ_EVENT_SENINF_6_FIFO_FULL		336
+#define CMDQ_EVENT_SENINF_7_FIFO_FULL		337
+#define CMDQ_EVENT_TG_OVRUN_A_INT_DLY		338
+#define CMDQ_EVENT_TG_OVRUN_B_INT_DLY		339
+#define CMDQ_EVENT_TG_OVRUN_C_INT		340
+#define CMDQ_EVENT_TG_GRABERR_A_INT_DLY		341
+#define CMDQ_EVENT_TG_GRABERR_B_INT_DLY		342
+#define CMDQ_EVENT_TG_GRABERR_C_INT		343
+#define CMDQ_EVENT_CQ_VR_SNAP_A_INT_DLY		344
+#define CMDQ_EVENT_CQ_VR_SNAP_B_INT_DLY		345
+#define CMDQ_EVENT_CQ_VR_SNAP_C_INT		346
+#define CMDQ_EVENT_DMA_R1_ERROR_A_INT_DLY	347
+#define CMDQ_EVENT_DMA_R1_ERROR_B_INT_DLY	348
+#define CMDQ_EVENT_DMA_R1_ERROR_C_INT		349
+#define CMDQ_EVENT_APU_GCE_CORE0_EVENT_0	353
+#define CMDQ_EVENT_APU_GCE_CORE0_EVENT_1	354
+#define CMDQ_EVENT_APU_GCE_CORE0_EVENT_2	355
+#define CMDQ_EVENT_APU_GCE_CORE0_EVENT_3	356
+#define CMDQ_EVENT_APU_GCE_CORE1_EVENT_0	385
+#define CMDQ_EVENT_APU_GCE_CORE1_EVENT_1	386
+#define CMDQ_EVENT_APU_GCE_CORE1_EVENT_2	387
+#define CMDQ_EVENT_APU_GCE_CORE1_EVENT_3	388
+#define CMDQ_EVENT_VDEC_EVENT_0			416
+#define CMDQ_EVENT_VDEC_EVENT_1			417
+#define CMDQ_EVENT_VDEC_EVENT_2			418
+#define CMDQ_EVENT_VDEC_EVENT_3			419
+#define CMDQ_EVENT_VDEC_EVENT_4			420
+#define CMDQ_EVENT_VDEC_EVENT_5			421
+#define CMDQ_EVENT_VDEC_EVENT_6			422
+#define CMDQ_EVENT_VDEC_EVENT_7			423
+#define CMDQ_EVENT_VDEC_EVENT_8			424
+#define CMDQ_EVENT_VDEC_EVENT_9			425
+#define CMDQ_EVENT_VDEC_EVENT_10		426
+#define CMDQ_EVENT_VDEC_EVENT_11		427
+#define CMDQ_EVENT_VDEC_EVENT_12		428
+#define CMDQ_EVENT_VDEC_EVENT_13		429
+#define CMDQ_EVENT_VDEC_EVENT_14		430
+#define CMDQ_EVENT_VDEC_EVENT_15		431
+#define CMDQ_EVENT_FDVT_DONE			449
+#define CMDQ_EVENT_FE_DONE			450
+#define CMDQ_EVENT_RSC_EOF			451
+#define CMDQ_EVENT_DVS_DONE_ASYNC_SHOT		452
+#define CMDQ_EVENT_DVP_DONE_ASYNC_SHOT		453
+#define CMDQ_EVENT_DSI0_TE_INFRA		898
+
+#endif
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 02/16] mailbox: cmdq: variablize address shift in platform

[Dennis YC Hsieh]

Some gce hardware shift pc and end address in register to support
large dram addressing.
Implement gce address shift when write or read pc and end register.
And add shift bit in platform definition.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c       | 61 ++++++++++++++++++------
 include/linux/mailbox/mtk-cmdq-mailbox.h |  2 +
 2 files changed, 48 insertions(+), 15 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 9a6ce9f5a7db..4dbee9258127 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -76,8 +76,22 @@ struct cmdq {
 	struct cmdq_thread	*thread;
 	struct clk		*clock;
 	bool			suspended;
+	u8			shift_pa;
 };
 
+struct gce_plat {
+	u32 thread_nr;
+	u8 shift;
+};
+
+u8 cmdq_mbox_shift(struct mbox_chan *chan)
+{
+	struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox);
+
+	return cmdq->shift_pa;
+}
+EXPORT_SYMBOL(cmdq_mbox_shift);
+
 static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread)
 {
 	u32 status;
@@ -183,7 +197,7 @@ static void cmdq_task_remove_wfe(struct cmdq_task *task)
 	for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++)
 		if (cmdq_command_is_wfe(base[i]))
 			base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 |
-				  CMDQ_JUMP_PASS;
+				  CMDQ_JUMP_PASS >> task->cmdq->shift_pa;
 	dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size,
 				   DMA_TO_DEVICE);
 }
@@ -221,13 +235,15 @@ static void cmdq_task_handle_error(struct cmdq_task *task)
 {
 	struct cmdq_thread *thread = task->thread;
 	struct cmdq_task *next_task;
+	struct cmdq *cmdq = task->cmdq;
 
-	dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task);
-	WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0);
+	dev_err(cmdq->mbox.dev, "task 0x%p error\n", task);
+	WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
 	next_task = list_first_entry_or_null(&thread->task_busy_list,
 			struct cmdq_task, list_entry);
 	if (next_task)
-		writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
+		writel(next_task->pa_base >> cmdq->shift_pa,
+		       thread->base + CMDQ_THR_CURR_ADDR);
 	cmdq_thread_resume(thread);
 }
 
@@ -257,7 +273,7 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq,
 	else
 		return;
 
-	curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
+	curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << cmdq->shift_pa;
 
 	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
 				 list_entry) {
@@ -373,16 +389,20 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
 		WARN_ON(clk_enable(cmdq->clock) < 0);
 		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
 
-		writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
-		writel(task->pa_base + pkt->cmd_buf_size,
+		writel(task->pa_base >> cmdq->shift_pa,
+		       thread->base + CMDQ_THR_CURR_ADDR);
+		writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa,
 		       thread->base + CMDQ_THR_END_ADDR);
+
 		writel(thread->priority, thread->base + CMDQ_THR_PRIORITY);
 		writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
 		writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
 	} else {
 		WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
-		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
-		end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
+		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) <<
+			cmdq->shift_pa;
+		end_pa = readl(thread->base + CMDQ_THR_END_ADDR) <<
+			cmdq->shift_pa;
 
 		/*
 		 * Atomic execution should remove the following wfe, i.e. only
@@ -395,7 +415,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
 				cmdq_thread_wait_end(thread, end_pa);
 				WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
 				/* set to this task directly */
-				writel(task->pa_base,
+				writel(task->pa_base >> cmdq->shift_pa,
 				       thread->base + CMDQ_THR_CURR_ADDR);
 			} else {
 				cmdq_task_insert_into_thread(task);
@@ -407,14 +427,14 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
 			if (curr_pa == end_pa - CMDQ_INST_SIZE ||
 			    curr_pa == end_pa) {
 				/* set to this task directly */
-				writel(task->pa_base,
+				writel(task->pa_base >> cmdq->shift_pa,
 				       thread->base + CMDQ_THR_CURR_ADDR);
 			} else {
 				cmdq_task_insert_into_thread(task);
 				smp_mb(); /* modify jump before enable thread */
 			}
 		}
-		writel(task->pa_base + pkt->cmd_buf_size,
+		writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa,
 		       thread->base + CMDQ_THR_END_ADDR);
 		cmdq_thread_resume(thread);
 	}
@@ -461,6 +481,7 @@ static int cmdq_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct cmdq *cmdq;
 	int err, i;
+	struct gce_plat *plat_data;
 
 	cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL);
 	if (!cmdq)
@@ -479,7 +500,14 @@ static int cmdq_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
+	plat_data = (struct gce_plat *)of_device_get_match_data(dev);
+	if (!plat_data) {
+		dev_err(dev, "failed to get match data\n");
+		return -EINVAL;
+	}
+
+	cmdq->thread_nr = plat_data->thread_nr;
+	cmdq->shift_pa = plat_data->shift;
 	cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
 	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
 			       "mtk_cmdq", cmdq);
@@ -542,9 +570,12 @@ static const struct dev_pm_ops cmdq_pm_ops = {
 	.resume = cmdq_resume,
 };
 
+static const struct gce_plat gce_plat_v2 = {.thread_nr = 16};
+static const struct gce_plat gce_plat_v3 = {.thread_nr = 24};
+
 static const struct of_device_id cmdq_of_ids[] = {
-	{.compatible = "mediatek,mt8173-gce", .data = (void *)16},
-	{.compatible = "mediatek,mt8183-gce", .data = (void *)24},
+	{.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2},
+	{.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3},
 	{}
 };
 
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index a4dc45fbec0a..dfe5b2eb85cc 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -88,4 +88,6 @@ struct cmdq_pkt {
 	void			*cl;
 };
 
+u8 cmdq_mbox_shift(struct mbox_chan *chan);
+
 #endif /* __MTK_CMDQ_MAILBOX_H__ */
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 03/16] mailbox: cmdq: support mt6779 gce platform definition

[Dennis YC Hsieh]

Add gce v4 hardware support with different thread number and shift.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 4dbee9258127..9994ac9426d6 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -572,10 +572,12 @@ static const struct dev_pm_ops cmdq_pm_ops = {
 
 static const struct gce_plat gce_plat_v2 = {.thread_nr = 16};
 static const struct gce_plat gce_plat_v3 = {.thread_nr = 24};
+static const struct gce_plat gce_plat_v4 = {.thread_nr = 24, .shift = 3};
 
 static const struct of_device_id cmdq_of_ids[] = {
 	{.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2},
 	{.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3},
+	{.compatible = "mediatek,mt6779-gce", .data = (void *)&gce_plat_v4},
 	{}
 };
 
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 04/16] mailbox: mediatek: cmdq: clear task in channel before shutdown

[Dennis YC Hsieh]

Do success callback in channel when shutdown. For those task not finish,
callback with error code thus client has chance to cleanup or reset.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 38 ++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 9994ac9426d6..b56d340c8982 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -387,6 +387,12 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
 
 	if (list_empty(&thread->task_busy_list)) {
 		WARN_ON(clk_enable(cmdq->clock) < 0);
+		/*
+		 * The thread reset will clear thread related register to 0,
+		 * including pc, end, priority, irq, suspend and enable. Thus
+		 * set CMDQ_THR_ENABLED to CMDQ_THR_ENABLE_TASK will enable
+		 * thread and make it running.
+		 */
 		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
 
 		writel(task->pa_base >> cmdq->shift_pa,
@@ -450,6 +456,38 @@ static int cmdq_mbox_startup(struct mbox_chan *chan)
 
 static void cmdq_mbox_shutdown(struct mbox_chan *chan)
 {
+	struct cmdq_thread *thread = (struct cmdq_thread *)chan->con_priv;
+	struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev);
+	struct cmdq_task *task, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&thread->chan->lock, flags);
+	if (list_empty(&thread->task_busy_list))
+		goto done;
+
+	WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
+
+	/* make sure executed tasks have success callback */
+	cmdq_thread_irq_handler(cmdq, thread);
+	if (list_empty(&thread->task_busy_list))
+		goto done;
+
+	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
+				 list_entry) {
+		cmdq_task_exec_done(task, CMDQ_CB_ERROR);
+		kfree(task);
+	}
+
+	cmdq_thread_disable(cmdq, thread);
+	clk_disable(cmdq->clock);
+done:
+	/*
+	 * The thread->task_busy_list empty means thread already disable. The
+	 * cmdq_mbox_send_data() always reset thread which clear disable and
+	 * suspend statue when first pkt send to channel, so there is no need
+	 * to do any operation here, only unlock and leave.
+	 */
+	spin_unlock_irqrestore(&thread->chan->lock, flags);
 }
 
 static const struct mbox_chan_ops cmdq_mbox_chan_ops = {
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 06/16] soc: mediatek: cmdq: add address shift in jump

[Dennis YC Hsieh]

Add address shift when compose jump instruction
to compatible with 35bit format.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index c67081759728..98f23ba3ba47 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -291,7 +291,8 @@ static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 
 	/* JUMP to end */
 	inst.op = CMDQ_CODE_JUMP;
-	inst.value = CMDQ_JUMP_PASS;
+	inst.value = CMDQ_JUMP_PASS >>
+		cmdq_mbox_shift(((struct cmdq_client *)pkt->cl)->chan);
 	err = cmdq_pkt_append_command(pkt, inst);
 
 	return err;
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 07/16] soc: mediatek: cmdq: add assign function

[Dennis YC Hsieh]

Add assign function in cmdq helper which assign constant value into
internal register by index.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 24 +++++++++++++++++++++++-
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    | 14 ++++++++++++++
 3 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 98f23ba3ba47..33153d17c9d9 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -12,6 +12,7 @@
 #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
 #define CMDQ_POLL_ENABLE_MASK	BIT(0)
 #define CMDQ_EOC_IRQ_EN		BIT(0)
+#define CMDQ_REG_TYPE		1
 
 struct cmdq_instruction {
 	union {
@@ -21,8 +22,17 @@ struct cmdq_instruction {
 	union {
 		u16 offset;
 		u16 event;
+		u16 reg_dst;
+	};
+	union {
+		u8 subsys;
+		struct {
+			u8 sop:5;
+			u8 arg_c_t:1;
+			u8 arg_b_t:1;
+			u8 dst_t:1;
+		};
 	};
-	u8 subsys;
 	u8 op;
 };
 
@@ -277,6 +287,18 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_poll_mask);
 
+int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
+{
+	struct cmdq_instruction inst = { {0} };
+
+	inst.op = CMDQ_CODE_LOGIC;
+	inst.dst_t = CMDQ_REG_TYPE;
+	inst.reg_dst = reg_idx;
+	inst.value = value;
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_assign);
+
 static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index dfe5b2eb85cc..121c3bb6d3de 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -59,6 +59,7 @@ enum cmdq_code {
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
+	CMDQ_CODE_LOGIC = 0xa0,
 };
 
 enum cmdq_cb_status {
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index a74c1d5acdf3..83340211e1d3 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -152,6 +152,20 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
  */
 int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
 		       u16 offset, u32 value, u32 mask);
+
+/**
+ * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE
+ *		       to execute an instruction that set a constant value into
+ *		       internal register and use as value, mask or address in
+ *		       read/write instruction.
+ * @pkt:	the CMDQ packet
+ * @reg_idx:	the CMDQ internal register ID
+ * @value:	the specified value
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
+
 /**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
  *                          packet and call back at the end of done packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 08/16] soc: mediatek: cmdq: add write_s function

[Dennis YC Hsieh]

add write_s function in cmdq helper functions which
writes value contains in internal register to address
with large dma access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 ++++++++++++++++++++-
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    | 20 ++++++++++++++++++++
 3 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 33153d17c9d9..ee24c0ec0a24 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -18,6 +18,10 @@ struct cmdq_instruction {
 	union {
 		u32 value;
 		u32 mask;
+		struct {
+			u16 arg_c;
+			u16 src_reg;
+		};
 	};
 	union {
 		u16 offset;
@@ -29,7 +33,7 @@ struct cmdq_instruction {
 		struct {
 			u8 sop:5;
 			u8 arg_c_t:1;
-			u8 arg_b_t:1;
+			u8 src_t:1;
 			u8 dst_t:1;
 		};
 	};
@@ -222,6 +226,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+		     u16 addr_low, u16 src_reg_idx)
+{
+	struct cmdq_instruction inst = { {0} };
+
+	inst.op = CMDQ_CODE_WRITE_S;
+	inst.src_t = CMDQ_REG_TYPE;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.src_reg = src_reg_idx;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 121c3bb6d3de..ee67dd3b86f5 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -59,6 +59,7 @@ enum cmdq_code {
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
+	CMDQ_CODE_WRITE_S = 0x90,
 	CMDQ_CODE_LOGIC = 0xa0,
 };
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 83340211e1d3..d623f1aa7814 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -12,6 +12,8 @@
 #include <linux/timer.h>
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
+#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
+#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
 
 struct cmdq_pkt;
 
@@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
 int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 			u16 offset, u32 value, u32 mask);
 
+/**
+ * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @src_reg_idx:	the CMDQ internal register ID which cache source value
+ * @mask:	the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+		     u16 addr_low, u16 src_reg_idx);
+
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v6 08/16] soc: mediatek: cmdq: add write_s function

[Matthias Brugger]

On 28/05/2020 19:04, Dennis YC Hsieh wrote:
> add write_s function in cmdq helper functions which
> writes value contains in internal register to address
> with large dma access support.
> 
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
> ---
>  drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 ++++++++++++++++++++-
>  include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
>  include/linux/soc/mediatek/mtk-cmdq.h    | 20 ++++++++++++++++++++
>  3 files changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 33153d17c9d9..ee24c0ec0a24 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -18,6 +18,10 @@ struct cmdq_instruction {
>  	union {
>  		u32 value;
>  		u32 mask;
> +		struct {
> +			u16 arg_c;
> +			u16 src_reg;
> +		};
>  	};
>  	union {
>  		u16 offset;
> @@ -29,7 +33,7 @@ struct cmdq_instruction {
>  		struct {
>  			u8 sop:5;
>  			u8 arg_c_t:1;
> -			u8 arg_b_t:1;
> +			u8 src_t:1;

This should be part of 7/16.

>  			u8 dst_t:1;
>  		};
>  	};
> @@ -222,6 +226,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
>  }
>  EXPORT_SYMBOL(cmdq_pkt_write_mask);
>  
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> +		     u16 addr_low, u16 src_reg_idx)
> +{
> +	struct cmdq_instruction inst = { {0} };

If you want an empty struct on the stack, I think {}; should be enough, right?

Regards,
Matthias

> +
> +	inst.op = CMDQ_CODE_WRITE_S;
> +	inst.src_t = CMDQ_REG_TYPE;
> +	inst.sop = high_addr_reg_idx;
> +	inst.offset = addr_low;
> +	inst.src_reg = src_reg_idx;
> +
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_s);
> +
>  int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
>  {
>  	struct cmdq_instruction inst = { {0} };
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 121c3bb6d3de..ee67dd3b86f5 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -59,6 +59,7 @@ enum cmdq_code {
>  	CMDQ_CODE_JUMP = 0x10,
>  	CMDQ_CODE_WFE = 0x20,
>  	CMDQ_CODE_EOC = 0x40,
> +	CMDQ_CODE_WRITE_S = 0x90,
>  	CMDQ_CODE_LOGIC = 0xa0,
>  };
>  
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 83340211e1d3..d623f1aa7814 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -12,6 +12,8 @@
>  #include <linux/timer.h>
>  
>  #define CMDQ_NO_TIMEOUT		0xffffffffu
> +#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
> +#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
>  
>  struct cmdq_pkt;
>  
> @@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
>  int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
>  			u16 offset, u32 value, u32 mask);
>  
> +/**
> + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @high_addr_reg_idx:	internal register ID which contains high address of pa
> + * @addr_low:	low address of pa
> + * @src_reg_idx:	the CMDQ internal register ID which cache source value
> + * @mask:	the specified target address mask, use U32_MAX if no need
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> + * to get high address and call cmdq_pkt_assign() to assign value into internal
> + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
> + * call to this function.
> + */
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> +		     u16 addr_low, u16 src_reg_idx);
> +
>  /**
>   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
>   * @pkt:	the CMDQ packet
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v6 08/16] soc: mediatek: cmdq: add write_s function

[Dennis-YC Hsieh]

Hi Matthias,

Thanks for your comment.

On Thu, 2020-05-28 at 23:08 +0200, Matthias Brugger wrote:
> 
> On 28/05/2020 19:04, Dennis YC Hsieh wrote:
> > add write_s function in cmdq helper functions which
> > writes value contains in internal register to address
> > with large dma access support.
> > 
> > Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
> > ---
> >  drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 ++++++++++++++++++++-
> >  include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
> >  include/linux/soc/mediatek/mtk-cmdq.h    | 20 ++++++++++++++++++++
> >  3 files changed, 41 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index 33153d17c9d9..ee24c0ec0a24 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -18,6 +18,10 @@ struct cmdq_instruction {
> >  	union {
> >  		u32 value;
> >  		u32 mask;
> > +		struct {
> > +			u16 arg_c;
> > +			u16 src_reg;
> > +		};
> >  	};
> >  	union {
> >  		u16 offset;
> > @@ -29,7 +33,7 @@ struct cmdq_instruction {
> >  		struct {
> >  			u8 sop:5;
> >  			u8 arg_c_t:1;
> > -			u8 arg_b_t:1;
> > +			u8 src_t:1;
> 
> This should be part of 7/16.

ok, I'll move it

> 
> >  			u8 dst_t:1;
> >  		};
> >  	};
> > @@ -222,6 +226,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> >  }
> >  EXPORT_SYMBOL(cmdq_pkt_write_mask);
> >  
> > +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > +		     u16 addr_low, u16 src_reg_idx)
> > +{
> > +	struct cmdq_instruction inst = { {0} };
> 
> If you want an empty struct on the stack, I think {}; should be enough, right?

Yes, I'll change the style, thanks


Regards,
Dennis

> 
> Regards,
> Matthias
> 
> > +
> > +	inst.op = CMDQ_CODE_WRITE_S;
> > +	inst.src_t = CMDQ_REG_TYPE;
> > +	inst.sop = high_addr_reg_idx;
> > +	inst.offset = addr_low;
> > +	inst.src_reg = src_reg_idx;
> > +
> > +	return cmdq_pkt_append_command(pkt, inst);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write_s);
> > +
> >  int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> >  {
> >  	struct cmdq_instruction inst = { {0} };
> > diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > index 121c3bb6d3de..ee67dd3b86f5 100644
> > --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> > +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > @@ -59,6 +59,7 @@ enum cmdq_code {
> >  	CMDQ_CODE_JUMP = 0x10,
> >  	CMDQ_CODE_WFE = 0x20,
> >  	CMDQ_CODE_EOC = 0x40,
> > +	CMDQ_CODE_WRITE_S = 0x90,
> >  	CMDQ_CODE_LOGIC = 0xa0,
> >  };
> >  
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > index 83340211e1d3..d623f1aa7814 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -12,6 +12,8 @@
> >  #include <linux/timer.h>
> >  
> >  #define CMDQ_NO_TIMEOUT		0xffffffffu
> > +#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
> > +#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
> >  
> >  struct cmdq_pkt;
> >  
> > @@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
> >  int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> >  			u16 offset, u32 value, u32 mask);
> >  
> > +/**
> > + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
> > + * @pkt:	the CMDQ packet
> > + * @high_addr_reg_idx:	internal register ID which contains high address of pa
> > + * @addr_low:	low address of pa
> > + * @src_reg_idx:	the CMDQ internal register ID which cache source value
> > + * @mask:	the specified target address mask, use U32_MAX if no need
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> > + * to get high address and call cmdq_pkt_assign() to assign value into internal
> > + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
> > + * call to this function.
> > + */
> > +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > +		     u16 addr_low, u16 src_reg_idx);
> > +
> >  /**
> >   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> >   * @pkt:	the CMDQ packet
> > 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 09/16] soc: mediatek: cmdq: add write_s_mask function

[Dennis YC Hsieh]

add write_s_mask function in cmdq helper functions which
writes value contains in internal register to address
with mask and large dma access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 23 +++++++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    | 19 ++++++++++++++++++-
 3 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ee24c0ec0a24..58a414790471 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -241,6 +241,29 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_s);
 
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+			  u16 addr_low, u16 src_reg_idx, u32 mask)
+{
+	struct cmdq_instruction inst = { {0} };
+	int err;
+
+	inst.op = CMDQ_CODE_MASK;
+	inst.mask = ~mask;
+	err = cmdq_pkt_append_command(pkt, inst);
+	if (err < 0)
+		return err;
+
+	inst.mask = 0;
+	inst.op = CMDQ_CODE_WRITE_S_MASK;
+	inst.src_t = CMDQ_REG_TYPE;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.src_reg = src_reg_idx;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ee67dd3b86f5..8ef87e1bd03b 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -60,6 +60,7 @@ enum cmdq_code {
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
 	CMDQ_CODE_WRITE_S = 0x90,
+	CMDQ_CODE_WRITE_S_MASK = 0x91,
 	CMDQ_CODE_LOGIC = 0xa0,
 };
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index d623f1aa7814..ca9c75fd8125 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -110,7 +110,6 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
  * @high_addr_reg_idx:	internal register ID which contains high address of pa
  * @addr_low:	low address of pa
  * @src_reg_idx:	the CMDQ internal register ID which cache source value
- * @mask:	the specified target address mask, use U32_MAX if no need
  *
  * Return: 0 for success; else the error code is returned
  *
@@ -122,6 +121,24 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 		     u16 addr_low, u16 src_reg_idx);
 
+/**
+ * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @src_reg_idx:	the CMDQ internal register ID which cache source value
+ * @mask:	the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+			  u16 addr_low, u16 src_reg_idx, u32 mask);
+
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 10/16] soc: mediatek: cmdq: add read_s function

[Dennis YC Hsieh]

Add read_s function in cmdq helper functions which support read value from
register or dma physical address into gce internal register.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 15 +++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    | 13 +++++++++++++
 3 files changed, 29 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 58a414790471..02ac0ca23f6e 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -226,6 +226,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+		    u16 reg_idx)
+{
+	struct cmdq_instruction inst = { {0} };
+
+	inst.op = CMDQ_CODE_READ_S;
+	inst.dst_t = CMDQ_REG_TYPE;
+	inst.sop = high_addr_reg_idx;
+	inst.reg_dst = reg_idx;
+	inst.src_reg = addr_low;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_read_s);
+
 int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 		     u16 addr_low, u16 src_reg_idx)
 {
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 8ef87e1bd03b..3f6bc0dfd5da 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -59,6 +59,7 @@ enum cmdq_code {
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
+	CMDQ_CODE_READ_S = 0x80,
 	CMDQ_CODE_WRITE_S = 0x90,
 	CMDQ_CODE_WRITE_S_MASK = 0x91,
 	CMDQ_CODE_LOGIC = 0xa0,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index ca9c75fd8125..c07baa1534ca 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -104,6 +104,19 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
 int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 			u16 offset, u32 value, u32 mask);
 
+/*
+ * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @addr:	the physical address of register or dma to read
+ * @reg_idx:	the CMDQ internal register ID to cache read data
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+		    u16 reg_idx);
+
 /**
  * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
  * @pkt:	the CMDQ packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 11/16] soc: mediatek: cmdq: add write_s value function

[Dennis YC Hsieh]

add write_s function in cmdq helper functions which
writes a constant value to address with large dma
access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 14 ++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 13 +++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 02ac0ca23f6e..12095a1b701b 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -279,6 +279,20 @@ int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
 
+int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+			   u16 addr_low, u32 value)
+{
+	struct cmdq_instruction inst = { {0} };
+
+	inst.op = CMDQ_CODE_WRITE_S;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.value = value;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_value);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index c07baa1534ca..bb36750be58c 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -152,6 +152,19 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 			  u16 addr_low, u16 src_reg_idx, u32 mask);
 
+/**
+ * cmdq_pkt_write_s_value() - append write_s command to the CMDQ packet which
+ *			      write value to a physical address
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @value:	the specified target value
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+			   u16 addr_low, u32 value);
+
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 12/16] soc: mediatek: cmdq: add write_s_mask value function

[Dennis YC Hsieh]

add write_s_mask_value function in cmdq helper functions which
writes a constant value to address with mask and large dma
access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 21 +++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 15 +++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 12095a1b701b..4b07da56c7bb 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -293,6 +293,27 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_s_value);
 
+int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+				u16 addr_low, u32 value, u32 mask)
+{
+	struct cmdq_instruction inst = { {0} };
+	int err;
+
+	inst.op = CMDQ_CODE_MASK;
+	inst.mask = ~mask;
+	err = cmdq_pkt_append_command(pkt, inst);
+	if (err < 0)
+		return err;
+
+	inst.op = CMDQ_CODE_WRITE_S_MASK;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.value = value;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index bb36750be58c..28a50c3cf6a1 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -165,6 +165,21 @@ int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 			   u16 addr_low, u32 value);
 
+/**
+ * cmdq_pkt_write_s_mask_value() - append write_s command with mask to the CMDQ
+ *				   packet which write value to a physical
+ *				   address
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @value:	the specified target value
+ * @mask:	the specified target mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+				u16 addr_low, u32 value, u32 mask);
+
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 13/16] soc: mediatek: cmdq: export finalize function

[Dennis YC Hsieh]

Export finalize function to client which helps append eoc and jump
command to pkt. Let client decide call finalize or not.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 1 +
 drivers/soc/mediatek/mtk-cmdq-helper.c  | 7 ++-----
 include/linux/soc/mediatek/mtk-cmdq.h   | 8 ++++++++
 3 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 0dfcd1787e65..7daaabc26eb1 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -490,6 +490,7 @@ static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
 		cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event);
 		cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event);
 		mtk_crtc_ddp_config(crtc, cmdq_handle);
+		cmdq_pkt_finalize(cmdq_handle);
 		cmdq_pkt_flush_async(cmdq_handle, ddp_cmdq_cb, cmdq_handle);
 	}
 #endif
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 4b07da56c7bb..ebcdd30cd783 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -391,7 +391,7 @@ int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
 }
 EXPORT_SYMBOL(cmdq_pkt_assign);
 
-static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
+int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 {
 	struct cmdq_instruction inst = { {0} };
 	int err;
@@ -411,6 +411,7 @@ static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 
 	return err;
 }
+EXPORT_SYMBOL(cmdq_pkt_finalize);
 
 static void cmdq_pkt_flush_async_cb(struct cmdq_cb_data data)
 {
@@ -445,10 +446,6 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
 	unsigned long flags = 0;
 	struct cmdq_client *client = (struct cmdq_client *)pkt->cl;
 
-	err = cmdq_pkt_finalize(pkt);
-	if (err < 0)
-		return err;
-
 	pkt->cb.cb = cb;
 	pkt->cb.data = data;
 	pkt->async_cb.cb = cmdq_pkt_flush_async_cb;
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 28a50c3cf6a1..703cffcd55bd 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -244,6 +244,14 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
  */
 int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
 
+/**
+ * cmdq_pkt_finalize() - Append EOC and jump command to pkt.
+ * @pkt:	the CMDQ packet
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_finalize(struct cmdq_pkt *pkt);
+
 /**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
  *                          packet and call back at the end of done packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 14/16] soc: mediatek: cmdq: add jump function

[Dennis YC Hsieh]

Add jump function so that client can jump to any address which
contains instruction.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 13 +++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 11 +++++++++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ebcdd30cd783..5cf9e71b7900 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -13,6 +13,7 @@
 #define CMDQ_POLL_ENABLE_MASK	BIT(0)
 #define CMDQ_EOC_IRQ_EN		BIT(0)
 #define CMDQ_REG_TYPE		1
+#define CMDQ_JUMP_RELATIVE	1
 
 struct cmdq_instruction {
 	union {
@@ -391,6 +392,18 @@ int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
 }
 EXPORT_SYMBOL(cmdq_pkt_assign);
 
+int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr)
+{
+	struct cmdq_instruction inst = { {0} };
+
+	inst.op = CMDQ_CODE_JUMP;
+	inst.offset = CMDQ_JUMP_RELATIVE;
+	inst.value = addr >>
+		cmdq_mbox_shift(((struct cmdq_client *)pkt->cl)->chan);
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_jump);
+
 int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 703cffcd55bd..9494b293bad9 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -244,6 +244,17 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
  */
 int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
 
+/**
+ * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE
+ *		     to execute an instruction that change current thread PC to
+ *		     a physical address which should contains more instruction.
+ * @pkt:        the CMDQ packet
+ * @addr:       physical address of target instruction buffer
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr);
+
 /**
  * cmdq_pkt_finalize() - Append EOC and jump command to pkt.
  * @pkt:	the CMDQ packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 15/16] soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api

[Dennis YC Hsieh]

Add clear parameter to let client decide if
event should be clear to 0 after GCE receive it.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  | 2 +-
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 5 +++--
 include/linux/mailbox/mtk-cmdq-mailbox.h | 3 +--
 include/linux/soc/mediatek/mtk-cmdq.h    | 5 +++--
 4 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 7daaabc26eb1..a065b3a412cf 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -488,7 +488,7 @@ static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
 	if (mtk_crtc->cmdq_client) {
 		cmdq_handle = cmdq_pkt_create(mtk_crtc->cmdq_client, PAGE_SIZE);
 		cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event);
-		cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event);
+		cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, false);
 		mtk_crtc_ddp_config(crtc, cmdq_handle);
 		cmdq_pkt_finalize(cmdq_handle);
 		cmdq_pkt_flush_async(cmdq_handle, ddp_cmdq_cb, cmdq_handle);
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 5cf9e71b7900..9e9a4c81553a 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -315,15 +315,16 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value);
 
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear)
 {
 	struct cmdq_instruction inst = { {0} };
+	u32 clear_option = clear ? CMDQ_WFE_UPDATE : 0;
 
 	if (event >= CMDQ_MAX_EVENT)
 		return -EINVAL;
 
 	inst.op = CMDQ_CODE_WFE;
-	inst.value = CMDQ_WFE_OPTION;
+	inst.value = CMDQ_WFE_OPTION | clear_option;
 	inst.event = event;
 
 	return cmdq_pkt_append_command(pkt, inst);
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 3f6bc0dfd5da..42d2a30e6a70 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -27,8 +27,7 @@
  * bit 16-27: update value
  * bit 31: 1 - update, 0 - no update
  */
-#define CMDQ_WFE_OPTION			(CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
-					CMDQ_WFE_WAIT_VALUE)
+#define CMDQ_WFE_OPTION			(CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE)
 
 /** cmdq event maximum */
 #define CMDQ_MAX_EVENT			0x3ff
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 9494b293bad9..3216ccfff4a9 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -183,11 +183,12 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
- * @event:	the desired event type to "wait and CLEAR"
+ * @event:	the desired event type to wait
+ * @clear:	clear event or not after event arrive
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear);
 
 /**
  * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 16/16] soc: mediatek: cmdq: add set event function

[Dennis YC Hsieh]

Add set event function in cmdq helper functions to set specific event.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 15 +++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    |  9 +++++++++
 3 files changed, 25 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 9e9a4c81553a..e9b1dd31f63b 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -346,6 +346,21 @@ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
 }
 EXPORT_SYMBOL(cmdq_pkt_clear_event);
 
+int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event)
+{
+	struct cmdq_instruction inst = { {0} };
+
+	if (event >= CMDQ_MAX_EVENT)
+		return -EINVAL;
+
+	inst.op = CMDQ_CODE_WFE;
+	inst.value = CMDQ_WFE_UPDATE | CMDQ_WFE_UPDATE_VALUE;
+	inst.event = event;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_set_event);
+
 int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
 		  u16 offset, u32 value)
 {
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 42d2a30e6a70..ba2d811183a9 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -17,6 +17,7 @@
 #define CMDQ_JUMP_PASS			CMDQ_INST_SIZE
 
 #define CMDQ_WFE_UPDATE			BIT(31)
+#define CMDQ_WFE_UPDATE_VALUE		BIT(16)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 3216ccfff4a9..ea26020e63bf 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -199,6 +199,15 @@ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear);
  */
 int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
 
+/**
+ * cmdq_pkt_set_event() - append set event command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @event:	the desired event to be set
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event);
+
 /**
  * cmdq_pkt_poll() - Append polling command to the CMDQ packet, ask GCE to
  *		     execute an instruction that wait for a specified
-- 
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v6] support gce on mt6779 platform

[Jassi Brar]

On Thu, May 28, 2020 at 12:05 PM Dennis YC Hsieh
<dennis-yc.hsieh@mediatek.com> wrote:
>
> This patch support gce on mt6779 platform.
>
> Change since v5:
> - spearate address shift code in client helper and mailbox controller
> - separate write_s/write_s_mask and write_s_value/write_s_mask_value so that
>   client can decide use mask or not
> - fix typo in header
>
> Change since v4:
> - do not clear disp event again in drm driver
> - symbolize value 1 to jump relative
>
> [... snip ...]
>
>
>
> Dennis YC Hsieh (16):
>   dt-binding: gce: add gce header file for mt6779
>   mailbox: cmdq: variablize address shift in platform
>   mailbox: cmdq: support mt6779 gce platform definition
>   mailbox: mediatek: cmdq: clear task in channel before shutdown
>   soc: mediatek: cmdq: return send msg error code
>   soc: mediatek: cmdq: add address shift in jump
>   soc: mediatek: cmdq: add assign function
>   soc: mediatek: cmdq: add write_s function
>   soc: mediatek: cmdq: add write_s_mask function
>   soc: mediatek: cmdq: add read_s function
>   soc: mediatek: cmdq: add write_s value function
>   soc: mediatek: cmdq: add write_s_mask value function
>   soc: mediatek: cmdq: export finalize function
>   soc: mediatek: cmdq: add jump function
>   soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
>   soc: mediatek: cmdq: add set event function
>
>  .../devicetree/bindings/mailbox/mtk-gce.txt   |   8 +-
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |   3 +-
>  drivers/mailbox/mtk-cmdq-mailbox.c            | 101 ++++++--
>  drivers/soc/mediatek/mtk-cmdq-helper.c        | 163 ++++++++++++-
>  include/dt-bindings/gce/mt6779-gce.h          | 222 ++++++++++++++++++
>  include/linux/mailbox/mtk-cmdq-mailbox.h      |  10 +-
>  include/linux/soc/mediatek/mtk-cmdq.h         | 125 +++++++++-
>
Please break the patchset into two. The lower mailbox related changes
with soc changes on top.

thanks
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v6] support gce on mt6779 platform

[Dennis-YC Hsieh]

Hi Jassi,

Thanks for your comment

On Sat, 2020-05-30 at 15:34 -0500, Jassi Brar wrote:
> On Thu, May 28, 2020 at 12:05 PM Dennis YC Hsieh
> <dennis-yc.hsieh@mediatek.com> wrote:
> >
> > This patch support gce on mt6779 platform.
> >
> > Change since v5:
> > - spearate address shift code in client helper and mailbox controller
> > - separate write_s/write_s_mask and write_s_value/write_s_mask_value so that
> >   client can decide use mask or not
> > - fix typo in header
> >
> > Change since v4:
> > - do not clear disp event again in drm driver
> > - symbolize value 1 to jump relative
> >
> > [... snip ...]
> >
> >
> >
> > Dennis YC Hsieh (16):
> >   dt-binding: gce: add gce header file for mt6779
> >   mailbox: cmdq: variablize address shift in platform
> >   mailbox: cmdq: support mt6779 gce platform definition
> >   mailbox: mediatek: cmdq: clear task in channel before shutdown
> >   soc: mediatek: cmdq: return send msg error code
> >   soc: mediatek: cmdq: add address shift in jump
> >   soc: mediatek: cmdq: add assign function
> >   soc: mediatek: cmdq: add write_s function
> >   soc: mediatek: cmdq: add write_s_mask function
> >   soc: mediatek: cmdq: add read_s function
> >   soc: mediatek: cmdq: add write_s value function
> >   soc: mediatek: cmdq: add write_s_mask value function
> >   soc: mediatek: cmdq: export finalize function
> >   soc: mediatek: cmdq: add jump function
> >   soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
> >   soc: mediatek: cmdq: add set event function
> >
> >  .../devicetree/bindings/mailbox/mtk-gce.txt   |   8 +-
> >  drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |   3 +-
> >  drivers/mailbox/mtk-cmdq-mailbox.c            | 101 ++++++--
> >  drivers/soc/mediatek/mtk-cmdq-helper.c        | 163 ++++++++++++-
> >  include/dt-bindings/gce/mt6779-gce.h          | 222 ++++++++++++++++++
> >  include/linux/mailbox/mtk-cmdq-mailbox.h      |  10 +-
> >  include/linux/soc/mediatek/mtk-cmdq.h         | 125 +++++++++-
> >
> Please break the patchset into two. The lower mailbox related changes
> with soc changes on top.

Ok, I'll separate patches into two patchset, thanks.


Regards,
Dennis

> 
> thanks

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel