* [PATCH v2 1/3] drm/msm/dp: check sink_count before update is_connected status
@ 2021-04-13 23:11 Kuogee Hsieh
2021-04-14 2:41 ` Stephen Boyd
0 siblings, 1 reply; 4+ messages in thread
From: Kuogee Hsieh @ 2021-04-13 23:11 UTC (permalink / raw)
To: robdclark, sean, swboyd
Cc: airlied, linux-arm-msm, dri-devel, linux-kernel, abhinavk,
khsieh, tanmay, aravindh, freedreno
Link status is different from display connected status in the case
of something like an Apple dongle where the type-c plug can be
connected, and therefore the link is connected, but no sink is
connected until an HDMI cable is plugged into the dongle.
The sink_count of DPCD of dongle will increase to 1 once an HDMI
cable is plugged into the dongle so that display connected status
will become true. This checking also apply at pm_resume.
Fixes: 94e58e2d06e3 ("drm/msm/dp: reset dp controller only at boot up and pm_resume")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 5a39da6..0ba71c7 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -586,10 +586,8 @@ static int dp_connect_pending_timeout(struct dp_display_private *dp, u32 data)
mutex_lock(&dp->event_mutex);
state = dp->hpd_state;
- if (state == ST_CONNECT_PENDING) {
- dp_display_enable(dp, 0);
+ if (state == ST_CONNECT_PENDING)
dp->hpd_state = ST_CONNECTED;
- }
mutex_unlock(&dp->event_mutex);
@@ -669,10 +667,8 @@ static int dp_disconnect_pending_timeout(struct dp_display_private *dp, u32 data
mutex_lock(&dp->event_mutex);
state = dp->hpd_state;
- if (state == ST_DISCONNECT_PENDING) {
- dp_display_disable(dp, 0);
+ if (state == ST_DISCONNECT_PENDING)
dp->hpd_state = ST_DISCONNECTED;
- }
mutex_unlock(&dp->event_mutex);
@@ -1272,7 +1268,12 @@ static int dp_pm_resume(struct device *dev)
status = dp_catalog_link_is_connected(dp->catalog);
- if (status)
+ /*
+ * can not declared display is connected unless
+ * HDMI cable is plugged in and sink_count of
+ * dongle become 1
+ */
+ if (status && dp->link->sink_count)
dp->dp_display.is_connected = true;
else
dp->dp_display.is_connected = false;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2 1/3] drm/msm/dp: check sink_count before update is_connected status
2021-04-13 23:11 [PATCH v2 1/3] drm/msm/dp: check sink_count before update is_connected status Kuogee Hsieh
@ 2021-04-14 2:41 ` Stephen Boyd
0 siblings, 0 replies; 4+ messages in thread
From: Stephen Boyd @ 2021-04-14 2:41 UTC (permalink / raw)
To: Kuogee Hsieh, robdclark, sean
Cc: airlied, linux-arm-msm, dri-devel, linux-kernel, abhinavk,
khsieh, tanmay, aravindh, freedreno
Quoting Kuogee Hsieh (2021-04-13 16:11:10)
> Link status is different from display connected status in the case
> of something like an Apple dongle where the type-c plug can be
> connected, and therefore the link is connected, but no sink is
> connected until an HDMI cable is plugged into the dongle.
> The sink_count of DPCD of dongle will increase to 1 once an HDMI
> cable is plugged into the dongle so that display connected status
> will become true. This checking also apply at pm_resume.
>
> Fixes: 94e58e2d06e3 ("drm/msm/dp: reset dp controller only at boot up and pm_resume")
> Reported-by: Stephen Boyd <swboyd@chromium.org>
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/3] drm/msm/dp: check sink_count before update is_connected status
@ 2021-04-14 21:02 Kuogee Hsieh
2021-04-14 21:18 ` Stephen Boyd
0 siblings, 1 reply; 4+ messages in thread
From: Kuogee Hsieh @ 2021-04-14 21:02 UTC (permalink / raw)
To: robdclark, sean, swboyd
Cc: airlied, linux-arm-msm, dri-devel, linux-kernel, abhinavk,
khsieh, tanmay, aravindh, freedreno
Link status is different from display connected status in the case
of something like an Apple dongle where the type-c plug can be
connected, and therefore the link is connected, but no sink is
connected until an HDMI cable is plugged into the dongle.
The sink_count of DPCD of dongle will increase to 1 once an HDMI
cable is plugged into the dongle so that display connected status
will become true. This checking also apply at pm_resume.
Fixes: 94e58e2d06e3 ("drm/msm/dp: reset dp controller only at boot up and pm_resume")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 5a39da6..0ba71c7 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -586,10 +586,8 @@ static int dp_connect_pending_timeout(struct dp_display_private *dp, u32 data)
mutex_lock(&dp->event_mutex);
state = dp->hpd_state;
- if (state == ST_CONNECT_PENDING) {
- dp_display_enable(dp, 0);
+ if (state == ST_CONNECT_PENDING)
dp->hpd_state = ST_CONNECTED;
- }
mutex_unlock(&dp->event_mutex);
@@ -669,10 +667,8 @@ static int dp_disconnect_pending_timeout(struct dp_display_private *dp, u32 data
mutex_lock(&dp->event_mutex);
state = dp->hpd_state;
- if (state == ST_DISCONNECT_PENDING) {
- dp_display_disable(dp, 0);
+ if (state == ST_DISCONNECT_PENDING)
dp->hpd_state = ST_DISCONNECTED;
- }
mutex_unlock(&dp->event_mutex);
@@ -1272,7 +1268,12 @@ static int dp_pm_resume(struct device *dev)
status = dp_catalog_link_is_connected(dp->catalog);
- if (status)
+ /*
+ * can not declared display is connected unless
+ * HDMI cable is plugged in and sink_count of
+ * dongle become 1
+ */
+ if (status && dp->link->sink_count)
dp->dp_display.is_connected = true;
else
dp->dp_display.is_connected = false;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2 1/3] drm/msm/dp: check sink_count before update is_connected status
2021-04-14 21:02 Kuogee Hsieh
@ 2021-04-14 21:18 ` Stephen Boyd
0 siblings, 0 replies; 4+ messages in thread
From: Stephen Boyd @ 2021-04-14 21:18 UTC (permalink / raw)
To: Kuogee Hsieh, robdclark, sean
Cc: airlied, linux-arm-msm, dri-devel, linux-kernel, abhinavk,
khsieh, tanmay, aravindh, freedreno
Quoting Kuogee Hsieh (2021-04-14 14:02:34)
> Link status is different from display connected status in the case
> of something like an Apple dongle where the type-c plug can be
> connected, and therefore the link is connected, but no sink is
> connected until an HDMI cable is plugged into the dongle.
> The sink_count of DPCD of dongle will increase to 1 once an HDMI
> cable is plugged into the dongle so that display connected status
> will become true. This checking also apply at pm_resume.
>
> Fixes: 94e58e2d06e3 ("drm/msm/dp: reset dp controller only at boot up and pm_resume")
> Reported-by: Stephen Boyd <swboyd@chromium.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Tested-by: Stephen Boyd <swboyd@chromium.org>
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---
Can you please thread your emailed patches? I see them all as toplevel
messages in my inbox :(
> drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 5a39da6..0ba71c7 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -586,10 +586,8 @@ static int dp_connect_pending_timeout(struct dp_display_private *dp, u32 data)
> mutex_lock(&dp->event_mutex);
>
> state = dp->hpd_state;
> - if (state == ST_CONNECT_PENDING) {
> - dp_display_enable(dp, 0);
> + if (state == ST_CONNECT_PENDING)
> dp->hpd_state = ST_CONNECTED;
> - }
>
> mutex_unlock(&dp->event_mutex);
>
> @@ -669,10 +667,8 @@ static int dp_disconnect_pending_timeout(struct dp_display_private *dp, u32 data
> mutex_lock(&dp->event_mutex);
>
> state = dp->hpd_state;
> - if (state == ST_DISCONNECT_PENDING) {
> - dp_display_disable(dp, 0);
> + if (state == ST_DISCONNECT_PENDING)
> dp->hpd_state = ST_DISCONNECTED;
> - }
>
> mutex_unlock(&dp->event_mutex);
>
> @@ -1272,7 +1268,12 @@ static int dp_pm_resume(struct device *dev)
>
> status = dp_catalog_link_is_connected(dp->catalog);
>
> - if (status)
> + /*
> + * can not declared display is connected unless
> + * HDMI cable is plugged in and sink_count of
> + * dongle become 1
> + */
> + if (status && dp->link->sink_count)
> dp->dp_display.is_connected = true;
> else
> dp->dp_display.is_connected = false;
With this patch applied things still go wrong for me sometimes. I can
connect the apple dongle and then disconnect the apple dongle, instead
of connect and disconnect the HDMI cable, and sometimes the external
display doesn't come on. I'm still investigating but just wanted to let
you know.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-04-14 21:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-13 23:11 [PATCH v2 1/3] drm/msm/dp: check sink_count before update is_connected status Kuogee Hsieh
2021-04-14 2:41 ` Stephen Boyd
2021-04-14 21:02 Kuogee Hsieh
2021-04-14 21:18 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).