dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v3 073/105] drm/vc4: hdmi: Move accessors to vc4_hdmi
Date: Wed, 27 May 2020 17:48:43 +0200	[thread overview]
Message-ID: <1705c3cb40906863ec0d24ee5ea5092f5ee2e994.1590594512.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.aaf2100bd7da4609f8bcb8216247d4b4e4379639.1590594512.git-series.maxime@cerno.tech>

The current driver only supports a single HDMI controller, and part of
the issue is that the main vc4_dev structure holds a pointer to its
(only) HDMI controller, and the HDMI registers accessors will use it to
retrieve the mapped addresses.

Let's modify those accessors to use directly the vc4_hdmi structure so
that we can eventually get rid of that single global pointer.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 24 +++++++++---------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  8 ++++----
 2 files changed, 13 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 38a14acf73e7..755b3e99a7af 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -123,6 +123,7 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
 
 	if (vc4->hdmi->hpd_gpio) {
 		if (gpio_get_value_cansleep(vc4->hdmi->hpd_gpio) ^
@@ -230,6 +231,7 @@ static int vc4_hdmi_stop_packet(struct drm_encoder *encoder,
 {
 	struct drm_device *dev = encoder->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
 	u32 packet_id = type - 0x80;
 
 	HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG,
@@ -244,6 +246,7 @@ static void vc4_hdmi_write_infoframe(struct drm_encoder *encoder,
 {
 	struct drm_device *dev = encoder->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
 	u32 packet_id = frame->any.type - 0x80;
 	u32 packet_reg = VC4_HDMI_RAM_PACKET(packet_id);
 	uint8_t buffer[VC4_HDMI_PACKET_STRIDE];
@@ -623,9 +626,6 @@ static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = {
 /* HDMI audio codec callbacks */
 static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
 {
-	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct drm_device *drm = encoder->dev;
-	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	u32 hsm_clock = clk_get_rate(vc4_hdmi->hsm_clock);
 	unsigned long n, m;
 
@@ -645,8 +645,6 @@ static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi)
 {
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
 	struct drm_crtc *crtc = encoder->crtc;
-	struct drm_device *drm = encoder->dev;
-	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
 	u32 samplerate = vc4_hdmi->audio.samplerate;
 	u32 n, cts;
@@ -683,7 +681,6 @@ static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
 	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
 	struct drm_connector *connector = &vc4_hdmi->connector.base;
-	struct vc4_dev *vc4 = to_vc4_dev(encoder->dev);
 	int ret;
 
 	if (vc4_hdmi->audio.substream && vc4_hdmi->audio.substream != substream)
@@ -714,9 +711,7 @@ static int vc4_hdmi_audio_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 static void vc4_hdmi_audio_reset(struct vc4_hdmi *vc4_hdmi)
 {
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct drm_device *drm = encoder->dev;
 	struct device *dev = &vc4_hdmi->pdev->dev;
-	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	int ret;
 
 	ret = vc4_hdmi_stop_packet(encoder, HDMI_INFOFRAME_TYPE_AUDIO);
@@ -747,10 +742,7 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_soc_dai *dai)
 {
 	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
-	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct drm_device *drm = encoder->dev;
 	struct device *dev = &vc4_hdmi->pdev->dev;
-	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map, i;
 
@@ -821,8 +813,6 @@ static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
 {
 	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct drm_device *drm = encoder->dev;
-	struct vc4_dev *vc4 = to_vc4_dev(drm);
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
@@ -1082,7 +1072,8 @@ static irqreturn_t vc4_cec_irq_handler_thread(int irq, void *priv)
 
 static void vc4_cec_read_msg(struct vc4_dev *vc4, u32 cntrl1)
 {
-	struct cec_msg *msg = &vc4->hdmi->cec_rx_msg;
+	struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
+	struct cec_msg *msg = &vc4_hdmi->cec_rx_msg;
 	unsigned int i;
 
 	msg->len = 1 + ((cntrl1 & VC4_HDMI_CEC_REC_WRD_CNT_MASK) >>
@@ -1128,6 +1119,7 @@ static irqreturn_t vc4_cec_irq_handler(int irq, void *priv)
 static int vc4_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
 {
 	struct vc4_dev *vc4 = cec_get_drvdata(adap);
+	struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
 	/* clock period in microseconds */
 	const u32 usecs = 1000000 / CEC_CLOCK_FREQ;
 	u32 val = HDMI_READ(VC4_HDMI_CEC_CNTRL_5);
@@ -1171,6 +1163,7 @@ static int vc4_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
 static int vc4_hdmi_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
 {
 	struct vc4_dev *vc4 = cec_get_drvdata(adap);
+	struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
 
 	HDMI_WRITE(VC4_HDMI_CEC_CNTRL_1,
 		   (HDMI_READ(VC4_HDMI_CEC_CNTRL_1) & ~VC4_HDMI_CEC_ADDR_MASK) |
@@ -1182,6 +1175,7 @@ static int vc4_hdmi_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
 				      u32 signal_free_time, struct cec_msg *msg)
 {
 	struct vc4_dev *vc4 = cec_get_drvdata(adap);
+	struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
 	u32 val;
 	unsigned int i;
 
@@ -1392,7 +1386,7 @@ static void vc4_hdmi_unbind(struct device *dev, struct device *master,
 
 	cec_unregister_adapter(vc4_hdmi->cec_adap);
 	vc4_hdmi_connector_destroy(&vc4_hdmi->connector.base);
-	vc4_hdmi_encoder_destroy(&vc4_hdmi->encoder.base.base);
+	drm_encoder_cleanup(&vc4_hdmi->encoder.base.base);
 
 	clk_disable_unprepare(vc4_hdmi->hsm_clock);
 	pm_runtime_disable(dev);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 17079a39f1b1..cdc9d90f62ac 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -78,9 +78,9 @@ struct vc4_hdmi {
 	struct debugfs_regset32 hd_regset;
 };
 
-#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
-#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
-#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
-#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
+#define HDMI_READ(offset) readl(vc4_hdmi->hdmicore_regs + offset)
+#define HDMI_WRITE(offset, val) writel(val, vc4_hdmi->hdmicore_regs + offset)
+#define HD_READ(offset) readl(vc4_hdmi->hd_regs + offset)
+#define HD_WRITE(offset, val) writel(val, vc4_hdmi->hd_regs + offset)
 
 #endif /* _VC4_HDMI_H_ */
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-05-28  7:44 UTC|newest]

Thread overview: 151+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-27 15:47 [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 001/105] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 002/105] reset: simple: Add reset callback Maxime Ripard
2020-05-27 16:03   ` Philipp Zabel
2020-05-27 15:47 ` [PATCH v3 003/105] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 004/105] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-06-04 17:26   ` Nicolas Saenz Julienne
2020-06-05 17:43     ` Maxime Ripard
2020-06-05 18:11       ` Nicolas Saenz Julienne
2020-06-05 17:56   ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 005/105] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 006/105] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-05-27 19:12   ` Rob Herring
2020-06-02 15:00     ` Maxime Ripard
2020-06-17 20:21   ` Rob Herring
2020-05-27 15:47 ` [PATCH v3 007/105] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 008/105] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 009/105] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 010/105] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 011/105] drm/vc4: drv: Add include guards Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 012/105] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-05-27 16:27   ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 013/105] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 014/105] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 015/105] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-05-27 16:33   ` Eric Anholt
2020-06-02 12:52     ` Maxime Ripard
2020-06-02 17:52       ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 016/105] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-05-27 16:44   ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 017/105] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 018/105] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 019/105] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 020/105] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-05-27 16:52   ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 021/105] drm/vc4: plane: Create more planes Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 022/105] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 023/105] drm/vc4: crtc: Switch to of_device_get_match_data Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 024/105] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 025/105] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 026/105] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 027/105] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 028/105] drm/vc4: crtc: Restrict HACT_ACT setup to DSI Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 029/105] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 030/105] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 031/105] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 032/105] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-05-27 16:54   ` Eric Anholt
2020-06-02 14:12     ` Maxime Ripard
2020-06-02 15:02       ` Dave Stevenson
2020-06-02 19:31         ` Eric Anholt
2020-06-02 20:03           ` Stefan Wahren
2020-06-03 13:14             ` Maxime Ripard
2020-06-03 15:26               ` Stefan Wahren
2020-06-12 15:35           ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 033/105] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-05-27 17:23   ` Eric Anholt
2020-06-16 15:04     ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 034/105] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 035/105] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 036/105] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 037/105] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 038/105] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 039/105] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 040/105] drm/vc4: crtc: Turn pixelvalve reset into a function Maxime Ripard
2020-05-27 17:30   ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 041/105] drm/vc4: crtc: Move HVS mode config to HVS file Maxime Ripard
2020-05-27 18:26   ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 042/105] drm/vc4: crtc: Move PV dump to config_pv Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 043/105] drm/vc4: crtc: Move HVS init and close to a function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 044/105] drm/vc4: crtc: Move the HVS gamma LUT setup to our init function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 045/105] drm/vc4: hvs: Make sure our channel is reset Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 046/105] drm/vc4: hvs: Remove mode_set_nofb Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 047/105] drm/vc4: crtc: " Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 048/105] drm/vc4: crtc: Remove redundant pixelvalve reset Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 049/105] drm/vc4: crtc: Move HVS channel init before the PV initialisation Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 050/105] drm/vc4: encoder: Add finer-grained encoder callbacks Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 051/105] drm/vc4: crtc: Add a delay after disabling the PixelValve output Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 052/105] drm/vc4: crtc: Clear the PixelValve FIFO on disable Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 053/105] drm/vc4: crtc: Clear the PixelValve FIFO during configuration Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 054/105] drm/vc4: hvs: Make the stop_channel function public Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 055/105] drm/vc4: hvs: Introduce a function to get the assigned FIFO Maxime Ripard
2020-05-27 19:40   ` Eric Anholt
2020-06-03  9:43     ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 056/105] drm/vc4: crtc: Move the CRTC disable out Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 057/105] drm/vc4: drv: Disable the CRTC at boot time Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 058/105] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 059/105] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-05-27 19:24   ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 060/105] drm/vc4: crtc: Make state functions public Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 061/105] drm/vc4: crtc: Split CRTC data in two Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 062/105] drm/vc4: crtc: Only access the PixelValve registers if we have to Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 063/105] drm/vc4: crtc: Move the CRTC initialisation to a separate function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 064/105] drm/vc4: crtc: Change the HVS5 test for of_device_is_compatible Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 065/105] drm/vc4: crtc: Move the txp_armed function to the TXP Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 066/105] drm/vc4: txp: Turn the TXP into a CRTC of its own Maxime Ripard
2020-05-28 15:51   ` Emil Velikov
2020-06-10 18:40     ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 067/105] drm/vc4: crtc: Remove the feed_txp tests Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 068/105] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 069/105] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 070/105] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-05-27 18:41   ` Eric Anholt
2020-06-02 15:54     ` Maxime Ripard
2020-06-03 17:32       ` Stefan Wahren
2020-06-05 14:35         ` Maxime Ripard
2020-06-06  8:06           ` Stefan Wahren
2020-06-11 13:34             ` Maxime Ripard
2020-06-14 16:16               ` Stefan Wahren
2020-06-16 12:30                 ` Maxime Ripard
2020-06-16 19:09                   ` Stefan Wahren
2020-05-27 15:48 ` [PATCH v3 071/105] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 072/105] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-05-27 15:48 ` Maxime Ripard [this message]
2020-05-27 15:48 ` [PATCH v3 074/105] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 075/105] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 076/105] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 077/105] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 078/105] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 079/105] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 080/105] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 081/105] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 082/105] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 083/105] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 084/105] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 085/105] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 086/105] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 087/105] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 088/105] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 089/105] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 090/105] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 091/105] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 092/105] drm/vc4: hdmi: Use clk_set_min_rate instead Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 093/105] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 094/105] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 095/105] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 096/105] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 097/105] drm/vc4: hdmi: Deal with multiple ALSA cards Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 098/105] drm/vc4: hdmi: Remove register dumps in enable Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 099/105] drm/vc4: hdmi: Always recenter the HDMI FIFO Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 100/105] drm/vc4: hdmi: Implement finer-grained hooks Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 101/105] drm/vc4: hdmi: Do the VID_CTL configuration at once Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 102/105] drm/vc4: hdmi: Switch to blank pixels when disabled Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 103/105] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 104/105] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-29 18:18   ` Rob Herring
2020-06-02 15:08     ` Maxime Ripard
2020-06-08 23:01       ` Rob Herring
2020-05-27 15:49 ` [PATCH v3 105/105] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-06-03 20:11   ` Stefan Wahren
2020-06-02 20:12 ` [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1705c3cb40906863ec0d24ee5ea5092f5ee2e994.1590594512.git-series.maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).