From: Hoegeun Kwon <hoegeun.kwon@samsung.com>
To: Maxime Ripard <maxime@cerno.tech>,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>
Cc: devicetree@vger.kernel.org, Tim Gover <tim.gover@raspberrypi.com>,
Kamal Dasu <kdasu.kdev@gmail.com>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Phil Elwell <phil@raspberrypi.com>,
Rob Herring <robh+dt@kernel.org>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Hoegeun Kwon <hoegeun.kwon@samsung.com>
Subject: Re: [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline
Date: Fri, 21 Aug 2020 16:18:34 +0900 [thread overview]
Message-ID: <1a39aedf-b708-e490-6acb-9a07e1b73300@samsung.com> (raw)
In-Reply-To: <cover.7a1aa1784976093af26cb31fd283cf5b3ed568bb.1594230107.git-series.maxime@cerno.tech>
Hi Maxime,
Thank you for your version 4 patch.
I tested all 78 patches based on the next-20200708.
Dual HDMI opearation does not work normally.
flip_done timed out occurs and doesn't work.
Could you check please it.
[ 105.694541] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR*
[CRTC:64:crtc-3] flip_done timed out
[ 115.934994] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR*
[CONNECTOR:32:HDMI-A-1] flip_done timed out
[ 126.174545] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR*
[PLANE:60:plane-3] flip_done timed out
And there is a problem with 4k UDH not outputting...
So this problem worked as I fixed it like patches[1].
[1] [PATCH 0/3] drm/vc4: Support HDMI QHD or higher output
"[PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline" all patches.
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Best regards,
Hoegeun
> Hi everyone,
>
> Here's a (pretty long) series to introduce support in the VC4 DRM driver
> for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4).
>
> The main differences are that there's two HDMI controllers and that there's
> more pixelvalve now. Those pixelvalve come with a mux in the HVS that still
> have only 3 FIFOs. Both of those differences are breaking a bunch of
> expectations in the driver, so we first need a good bunch of cleanup and
> reworks to introduce support for the new controllers.
>
> Similarly, the HDMI controller has all its registers shuffled and split in
> multiple controllers now, so we need a bunch of changes to support this as
> well.
>
> Only the HDMI support is enabled for now (even though the DPI and DSI
> outputs have been tested too).
>
> Let me know if you have any comments
> Maxime
>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: devicetree@vger.kernel.org
> Cc: Kamal Dasu <kdasu.kdev@gmail.com>
> Cc: linux-clk@vger.kernel.org
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
>
> Changes from v3:
> - Rebased on top of next-20200708
> - Added a name to the HDMI audio codec component
> - Only disable the BCM2711 HDMI pixelvalves at boot
> - Fixed an error in the HVS binding
> - Fix a framebuffer size condition that was inverted
> - Changed the channel allocation algorithm using Eric's suggestion
> - Always write the muxing values instead of updating if needed
> - Improved a bit the hvs_available_channels comment in the structure
> - Change atomic_complete_commit code to use for_each_new_crtc_in_state
> - Change the muxing code to take into account disparities between the
> BCM2711 and previous SoCs.
> - Only change the clock rate on BCM2711 during a modeset
> - Fix a crash at atomic_disable
> - Use clk_set_min_rate for the core clock too
> - Add a few defines, and simplify the FIFO level stuff
> - Reordered the patches according to Eric's reviews
> - Fixed a regression with VID_CTL setting on RPI3
>
> Changes from v2:
> - Rebased on top of next-20200526
> - Split the firmware clock series away
> - Removed the stuck pixel (with all the subsequent pixels being shifted
> by one
> - Fixed the writeback issue too.
> - Fix the dual output
> - Fixed the return value of phy_get_cp_current
> - Enhanced the comment on the reset delay
> - Increase the max width and height
> - Made a proper Kconfig option for the DVP clock driver
> - Fixed the alsa card name collision
>
> Changes from v1:
> - Rebased on top of 5.7-rc1
> - Run checkpatch
> - Added audio support
> - Fixed some HDMI timeouts
> - Swiched to clk_hw_register_gate_parent_data
> - Reorder Kconfig symbols in drivers/i2c/busses
> - Make the firmware clocks a child of the firmware node
> - Switch DVP clock driver to clk_hw interface
> - constify raspberrypi_clk_data in raspberrypi_clock_property
> - Don't mark firmware clocks as IGNORE_UNUSED
> - Change from reset_ms to reset_us in reset-simple, and add a bit more
> comments
> - Remove generic clk patch to test if a NULL pointer is returned
> - Removed misleading message in the is_prepared renaming patch commit
> message
> - Constify HDMI controller variants
> - Fix a bug in the allocation size of the clk data array
> - Added a mention in the DT binding conversion patches about the breakage
> - Merged a few fixes from kbuild
> - Fixed a few bisection and CEC build issues
> - Collected Acked-by and Reviewed-by
> - Change Dave email address to raspberrypi.com
>
> Dave Stevenson (7):
> drm/vc4: Add support for the BCM2711 HVS5
> drm/vc4: plane: Change LBM alignment constraint on LBM
> drm/vc4: plane: Optimize the LBM allocation size
> drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers
> drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming
> drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default.
> drm/vc4: hdmi: Add audio-related callbacks
>
> Maxime Ripard (71):
> dt-bindings: display: Add support for the BCM2711 HVS
> drm/vc4: hvs: Boost the core clock during modeset
> drm/vc4: plane: Create more planes
> drm/vc4: crtc: Deal with different number of pixel per clock
> drm/vc4: crtc: Use a shared interrupt
> drm/vc4: crtc: Move the cob allocation outside of bind
> drm/vc4: crtc: Rename HVS channel to output
> drm/vc4: crtc: Use local chan variable
> drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable
> drm/vc4: kms: Convert to for_each_new_crtc_state
> drm/vc4: crtc: Assign output to channel automatically
> drm/vc4: crtc: Add FIFO depth to vc4_crtc_data
> drm/vc4: crtc: Add function to compute FIFO level bits
> drm/vc4: crtc: Rename HDMI encoder type to HDMI0
> drm/vc4: crtc: Add HDMI1 encoder type
> drm/vc4: crtc: Disable color management for HVS5
> drm/vc4: crtc: Turn pixelvalve reset into a function
> drm/vc4: crtc: Move PV dump to config_pv
> drm/vc4: crtc: Move HVS init and close to a function
> drm/vc4: crtc: Move the HVS gamma LUT setup to our init function
> drm/vc4: hvs: Make sure our channel is reset
> drm/vc4: crtc: Remove mode_set_nofb
> drm/vc4: crtc: Remove redundant pixelvalve reset
> drm/vc4: crtc: Move HVS channel init before the PV initialisation
> drm/vc4: encoder: Add finer-grained encoder callbacks
> drm/vc4: crtc: Add a delay after disabling the PixelValve output
> drm/vc4: crtc: Clear the PixelValve FIFO on disable
> drm/vc4: crtc: Clear the PixelValve FIFO during configuration
> drm/vc4: hvs: Make the stop_channel function public
> drm/vc4: hvs: Introduce a function to get the assigned FIFO
> drm/vc4: crtc: Move the CRTC disable out
> drm/vc4: drv: Disable the CRTC at boot time
> dt-bindings: display: vc4: pv: Add BCM2711 pixel valves
> drm/vc4: crtc: Add BCM2711 pixelvalves
> drm/vc4: hdmi: Use debugfs private field
> drm/vc4: hdmi: Move structure to header
> drm/vc4: hdmi: rework connectors and encoders
> drm/vc4: hdmi: Remove DDC argument to connector_init
> drm/vc4: hdmi: Rename hdmi to vc4_hdmi
> drm/vc4: hdmi: Move accessors to vc4_hdmi
> drm/vc4: hdmi: Use local vc4_hdmi directly
> drm/vc4: hdmi: Add container_of macros for encoders and connectors
> drm/vc4: hdmi: Pass vc4_hdmi to CEC code
> drm/vc4: hdmi: Retrieve the vc4_hdmi at unbind using our device
> drm/vc4: hdmi: Remove vc4_dev hdmi pointer
> drm/vc4: hdmi: Remove vc4_hdmi_connector
> drm/vc4: hdmi: Introduce resource init and variant
> drm/vc4: hdmi: Implement a register layout abstraction
> drm/vc4: hdmi: Add reset callback
> drm/vc4: hdmi: Add PHY init and disable function
> drm/vc4: hdmi: Add PHY RNG enable / disable function
> drm/vc4: hdmi: Add a CSC setup callback
> drm/vc4: hdmi: Store the encoder type in the variant structure
> drm/vc4: hdmi: Deal with multiple debugfs files
> drm/vc4: hdmi: Move CEC init to its own function
> drm/vc4: hdmi: Add CEC support flag
> drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define
> drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid
> drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate
> drm/vc4: hdmi: Use clk_set_min_rate instead
> drm/vc4: hdmi: Deal with multiple ALSA cards
> drm/vc4: hdmi: Remove register dumps in enable
> drm/vc4: hdmi: Always recenter the HDMI FIFO
> drm/vc4: hdmi: Implement finer-grained hooks
> drm/vc4: hdmi: Do the VID_CTL configuration at once
> drm/vc4: hdmi: Switch to blank pixels when disabled
> drm/vc4: hdmi: Support the BCM2711 HDMI controllers
> dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
> dt-bindings: display: vc4: Document BCM2711 VC5
> drm/vc4: drv: Support BCM2711
> ARM: dts: bcm2711: Enable the display pipeline
>
> Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml | 109 +++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 18 +-
> Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 5 +-
> Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 1 +-
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 46 ++-
> arch/arm/boot/dts/bcm2711.dtsi | 115 ++++-
> drivers/gpu/drm/vc4/Makefile | 1 +-
> drivers/gpu/drm/vc4/vc4_crtc.c | 338 +++++++++++----
> drivers/gpu/drm/vc4/vc4_drv.c | 5 +-
> drivers/gpu/drm/vc4/vc4_drv.h | 43 +-
> drivers/gpu/drm/vc4/vc4_hdmi.c | 1625 +++++++++++++++++++++++++++++++++++++++++++-----------------------------
> drivers/gpu/drm/vc4/vc4_hdmi.h | 183 ++++++++-
> drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 520 +++++++++++++++++++++++-
> drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 442 ++++++++++++++++++++-
> drivers/gpu/drm/vc4/vc4_hvs.c | 260 +++++++-----
> drivers/gpu/drm/vc4/vc4_kms.c | 225 +++++++++-
> drivers/gpu/drm/vc4/vc4_plane.c | 222 +++++++---
> drivers/gpu/drm/vc4/vc4_regs.h | 177 +++-----
> drivers/gpu/drm/vc4/vc4_txp.c | 4 +-
> 19 files changed, 3331 insertions(+), 1008 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h
> create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_regs.h
>
> base-commit: 5bdd2824d705fb8d339d6f96e464b907c9a1553d
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-08-21 7:18 UTC|newest]
Thread overview: 144+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200709070649epcas1p13664bacc66a0f73443bf4d3e8940f933@epcas1p1.samsung.com>
2020-07-08 17:41 ` [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 01/78] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 02/78] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 03/78] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-09-01 11:21 ` Chanwoo Choi
2020-09-01 11:48 ` Chanwoo Choi
2020-09-02 14:48 ` Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 04/78] drm/vc4: plane: Change LBM alignment constraint on LBM Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 05/78] drm/vc4: plane: Optimize the LBM allocation size Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 06/78] drm/vc4: plane: Create more planes Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 07/78] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 08/78] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 09/78] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 10/78] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-07-28 9:48 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 11/78] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-07-28 9:50 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 12/78] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-07-28 9:57 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 13/78] drm/vc4: kms: Convert to for_each_new_crtc_state Maxime Ripard
2020-07-29 15:02 ` Dave Stevenson
2020-09-02 17:59 ` Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 14/78] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-07-29 14:31 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 15/78] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 16/78] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 17/78] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 18/78] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 19/78] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 20/78] drm/vc4: crtc: Turn pixelvalve reset into a function Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 21/78] drm/vc4: crtc: Move PV dump to config_pv Maxime Ripard
2020-07-28 10:30 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 22/78] drm/vc4: crtc: Move HVS init and close to a function Maxime Ripard
2020-07-28 10:31 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 23/78] drm/vc4: crtc: Move the HVS gamma LUT setup to our init function Maxime Ripard
2020-07-29 14:42 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 24/78] drm/vc4: hvs: Make sure our channel is reset Maxime Ripard
2020-07-28 10:37 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 25/78] drm/vc4: crtc: Remove mode_set_nofb Maxime Ripard
2020-07-28 10:38 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 26/78] drm/vc4: crtc: Remove redundant pixelvalve reset Maxime Ripard
2020-07-28 10:39 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 27/78] drm/vc4: crtc: Move HVS channel init before the PV initialisation Maxime Ripard
2020-07-28 10:40 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 28/78] drm/vc4: encoder: Add finer-grained encoder callbacks Maxime Ripard
2020-07-28 11:25 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 29/78] drm/vc4: crtc: Add a delay after disabling the PixelValve output Maxime Ripard
2020-07-29 14:09 ` Dave Stevenson
2020-07-29 14:42 ` Maxime Ripard
2020-07-29 14:45 ` Dave Stevenson
2020-07-29 15:50 ` Stefan Wahren
2020-08-25 15:06 ` Maxime Ripard
2020-08-25 21:30 ` Stefan Wahren
2020-09-01 9:58 ` Maxime Ripard
2020-09-01 16:31 ` Stefan Wahren
2020-09-02 15:08 ` Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 30/78] drm/vc4: crtc: Clear the PixelValve FIFO on disable Maxime Ripard
2020-07-28 11:40 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 31/78] drm/vc4: crtc: Clear the PixelValve FIFO during configuration Maxime Ripard
2020-07-28 11:41 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 32/78] drm/vc4: hvs: Make the stop_channel function public Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 33/78] drm/vc4: hvs: Introduce a function to get the assigned FIFO Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 34/78] drm/vc4: crtc: Move the CRTC disable out Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 35/78] drm/vc4: drv: Disable the CRTC at boot time Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 36/78] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 37/78] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 38/78] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 39/78] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 40/78] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-07-28 11:58 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 41/78] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 42/78] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 43/78] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 44/78] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 45/78] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 46/78] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 47/78] drm/vc4: hdmi: Retrieve the vc4_hdmi at unbind using our device Maxime Ripard
2020-07-28 12:32 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 48/78] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 49/78] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 50/78] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-07-28 12:37 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 51/78] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-07-28 12:59 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 52/78] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-07-28 13:00 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 53/78] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-07-28 13:03 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 54/78] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-07-28 13:04 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 55/78] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-07-28 13:12 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 56/78] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-07-28 13:18 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 57/78] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-07-28 13:20 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 58/78] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-07-28 13:23 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 59/78] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-07-28 13:25 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 60/78] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-07-28 13:26 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 61/78] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-07-28 14:45 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 62/78] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-07-28 14:56 ` Dave Stevenson
2020-09-01 4:36 ` Chanwoo Choi
2020-09-01 9:45 ` Maxime Ripard
2020-09-01 10:48 ` Chanwoo Choi
2020-07-08 17:42 ` [PATCH v4 63/78] drm/vc4: hdmi: Use clk_set_min_rate instead Maxime Ripard
2020-07-28 14:57 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 64/78] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 65/78] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 66/78] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 67/78] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 68/78] drm/vc4: hdmi: Deal with multiple ALSA cards Maxime Ripard
2020-07-28 15:00 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 69/78] drm/vc4: hdmi: Remove register dumps in enable Maxime Ripard
2020-07-28 15:01 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 70/78] drm/vc4: hdmi: Always recenter the HDMI FIFO Maxime Ripard
2020-07-28 15:03 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 71/78] drm/vc4: hdmi: Implement finer-grained hooks Maxime Ripard
2020-07-28 15:04 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 72/78] drm/vc4: hdmi: Do the VID_CTL configuration at once Maxime Ripard
2020-07-28 15:06 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 73/78] drm/vc4: hdmi: Switch to blank pixels when disabled Maxime Ripard
2020-07-28 15:09 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 74/78] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-07-28 15:21 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 75/78] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-09-01 4:45 ` Chanwoo Choi
2020-09-01 9:52 ` Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 76/78] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 77/78] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-07-28 15:30 ` Dave Stevenson
2020-09-01 10:19 ` Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 78/78] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-07-28 15:35 ` Dave Stevenson
2020-07-10 7:37 ` [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline Jian-Hong Pan
2020-07-10 9:58 ` Stefan Wahren
2020-08-21 7:18 ` Hoegeun Kwon [this message]
2020-09-02 13:32 ` Maxime Ripard
2020-09-02 13:52 ` Maxime Ripard
2020-08-31 2:36 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1a39aedf-b708-e490-6acb-9a07e1b73300@samsung.com \
--to=hoegeun.kwon@samsung.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=kdasu.kdev@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maxime@cerno.tech \
--cc=mturquette@baylibre.com \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).