dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v4 39/78] drm/vc4: hdmi: Move structure to header
Date: Wed,  8 Jul 2020 19:41:47 +0200	[thread overview]
Message-ID: <6070ac45cd27d6b551aafc3bc67f78987a43a47f.1594230107.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.7a1aa1784976093af26cb31fd283cf5b3ed568bb.1594230107.git-series.maxime@cerno.tech>

We will need to share the vc4_hdmi and related structures with multiple
files, so let's create a header for it.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 76 +-------------------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h | 86 +++++++++++++++++++++++++++++++++++-
 2 files changed, 87 insertions(+), 75 deletions(-)
 create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index f6b4a05a7d96..db79e0d88625 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -49,87 +49,13 @@
 #include <sound/soc.h>
 #include "media/cec.h"
 #include "vc4_drv.h"
+#include "vc4_hdmi.h"
 #include "vc4_regs.h"
 
 #define HSM_CLOCK_FREQ 163682864
 #define CEC_CLOCK_FREQ 40000
 #define CEC_CLOCK_DIV  (HSM_CLOCK_FREQ / CEC_CLOCK_FREQ)
 
-/* HDMI audio information */
-struct vc4_hdmi_audio {
-	struct snd_soc_card card;
-	struct snd_soc_dai_link link;
-	struct snd_soc_dai_link_component cpu;
-	struct snd_soc_dai_link_component codec;
-	struct snd_soc_dai_link_component platform;
-	int samplerate;
-	int channels;
-	struct snd_dmaengine_dai_dma_data dma_data;
-	struct snd_pcm_substream *substream;
-};
-
-/* General HDMI hardware state. */
-struct vc4_hdmi {
-	struct platform_device *pdev;
-
-	struct drm_encoder *encoder;
-	struct drm_connector *connector;
-
-	struct vc4_hdmi_audio audio;
-
-	struct i2c_adapter *ddc;
-	void __iomem *hdmicore_regs;
-	void __iomem *hd_regs;
-	int hpd_gpio;
-	bool hpd_active_low;
-
-	struct cec_adapter *cec_adap;
-	struct cec_msg cec_rx_msg;
-	bool cec_tx_ok;
-	bool cec_irq_was_rx;
-
-	struct clk *pixel_clock;
-	struct clk *hsm_clock;
-
-	struct debugfs_regset32 hdmi_regset;
-	struct debugfs_regset32 hd_regset;
-};
-
-#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
-#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
-#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
-#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
-
-/* VC4 HDMI encoder KMS struct */
-struct vc4_hdmi_encoder {
-	struct vc4_encoder base;
-	bool hdmi_monitor;
-	bool limited_rgb_range;
-};
-
-static inline struct vc4_hdmi_encoder *
-to_vc4_hdmi_encoder(struct drm_encoder *encoder)
-{
-	return container_of(encoder, struct vc4_hdmi_encoder, base.base);
-}
-
-/* VC4 HDMI connector KMS struct */
-struct vc4_hdmi_connector {
-	struct drm_connector base;
-
-	/* Since the connector is attached to just the one encoder,
-	 * this is the reference to it so we can do the best_encoder()
-	 * hook.
-	 */
-	struct drm_encoder *encoder;
-};
-
-static inline struct vc4_hdmi_connector *
-to_vc4_hdmi_connector(struct drm_connector *connector)
-{
-	return container_of(connector, struct vc4_hdmi_connector, base);
-}
-
 static const struct debugfs_reg32 hdmi_regs[] = {
 	VC4_REG32(VC4_HDMI_CORE_REV),
 	VC4_REG32(VC4_HDMI_SW_RESET_CONTROL),
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
new file mode 100644
index 000000000000..5ec5d1f6b1e6
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -0,0 +1,86 @@
+#ifndef _VC4_HDMI_H_
+#define _VC4_HDMI_H_
+
+#include <drm/drm_connector.h>
+#include <media/cec.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/soc.h>
+
+#include "vc4_drv.h"
+
+/* HDMI audio information */
+struct vc4_hdmi_audio {
+	struct snd_soc_card card;
+	struct snd_soc_dai_link link;
+	struct snd_soc_dai_link_component cpu;
+	struct snd_soc_dai_link_component codec;
+	struct snd_soc_dai_link_component platform;
+	int samplerate;
+	int channels;
+	struct snd_dmaengine_dai_dma_data dma_data;
+	struct snd_pcm_substream *substream;
+};
+
+/* General HDMI hardware state. */
+struct vc4_hdmi {
+	struct platform_device *pdev;
+
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+
+	struct vc4_hdmi_audio audio;
+
+	struct i2c_adapter *ddc;
+	void __iomem *hdmicore_regs;
+	void __iomem *hd_regs;
+	int hpd_gpio;
+	bool hpd_active_low;
+
+	struct cec_adapter *cec_adap;
+	struct cec_msg cec_rx_msg;
+	bool cec_tx_ok;
+	bool cec_irq_was_rx;
+
+	struct clk *pixel_clock;
+	struct clk *hsm_clock;
+
+	struct debugfs_regset32 hdmi_regset;
+	struct debugfs_regset32 hd_regset;
+};
+
+#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
+#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
+#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
+#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
+
+/* VC4 HDMI encoder KMS struct */
+struct vc4_hdmi_encoder {
+	struct vc4_encoder base;
+	bool hdmi_monitor;
+	bool limited_rgb_range;
+};
+
+static inline struct vc4_hdmi_encoder *
+to_vc4_hdmi_encoder(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct vc4_hdmi_encoder, base.base);
+}
+
+/* VC4 HDMI connector KMS struct */
+struct vc4_hdmi_connector {
+	struct drm_connector base;
+
+	/* Since the connector is attached to just the one encoder,
+	 * this is the reference to it so we can do the best_encoder()
+	 * hook.
+	 */
+	struct drm_encoder *encoder;
+};
+
+static inline struct vc4_hdmi_connector *
+to_vc4_hdmi_connector(struct drm_connector *connector)
+{
+	return container_of(connector, struct vc4_hdmi_connector, base);
+}
+
+#endif /* _VC4_HDMI_H_ */
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-07-09  7:07 UTC|newest]

Thread overview: 144+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200709070649epcas1p13664bacc66a0f73443bf4d3e8940f933@epcas1p1.samsung.com>
2020-07-08 17:41 ` [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 01/78] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 02/78] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 03/78] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-09-01 11:21     ` Chanwoo Choi
2020-09-01 11:48       ` Chanwoo Choi
2020-09-02 14:48       ` Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 04/78] drm/vc4: plane: Change LBM alignment constraint on LBM Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 05/78] drm/vc4: plane: Optimize the LBM allocation size Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 06/78] drm/vc4: plane: Create more planes Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 07/78] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 08/78] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 09/78] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 10/78] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-07-28  9:48     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 11/78] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-07-28  9:50     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 12/78] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-07-28  9:57     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 13/78] drm/vc4: kms: Convert to for_each_new_crtc_state Maxime Ripard
2020-07-29 15:02     ` Dave Stevenson
2020-09-02 17:59       ` Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 14/78] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-07-29 14:31     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 15/78] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 16/78] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 17/78] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 18/78] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 19/78] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 20/78] drm/vc4: crtc: Turn pixelvalve reset into a function Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 21/78] drm/vc4: crtc: Move PV dump to config_pv Maxime Ripard
2020-07-28 10:30     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 22/78] drm/vc4: crtc: Move HVS init and close to a function Maxime Ripard
2020-07-28 10:31     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 23/78] drm/vc4: crtc: Move the HVS gamma LUT setup to our init function Maxime Ripard
2020-07-29 14:42     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 24/78] drm/vc4: hvs: Make sure our channel is reset Maxime Ripard
2020-07-28 10:37     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 25/78] drm/vc4: crtc: Remove mode_set_nofb Maxime Ripard
2020-07-28 10:38     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 26/78] drm/vc4: crtc: Remove redundant pixelvalve reset Maxime Ripard
2020-07-28 10:39     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 27/78] drm/vc4: crtc: Move HVS channel init before the PV initialisation Maxime Ripard
2020-07-28 10:40     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 28/78] drm/vc4: encoder: Add finer-grained encoder callbacks Maxime Ripard
2020-07-28 11:25     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 29/78] drm/vc4: crtc: Add a delay after disabling the PixelValve output Maxime Ripard
2020-07-29 14:09     ` Dave Stevenson
2020-07-29 14:42       ` Maxime Ripard
2020-07-29 14:45         ` Dave Stevenson
2020-07-29 15:50         ` Stefan Wahren
2020-08-25 15:06           ` Maxime Ripard
2020-08-25 21:30             ` Stefan Wahren
2020-09-01  9:58               ` Maxime Ripard
2020-09-01 16:31                 ` Stefan Wahren
2020-09-02 15:08                   ` Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 30/78] drm/vc4: crtc: Clear the PixelValve FIFO on disable Maxime Ripard
2020-07-28 11:40     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 31/78] drm/vc4: crtc: Clear the PixelValve FIFO during configuration Maxime Ripard
2020-07-28 11:41     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 32/78] drm/vc4: hvs: Make the stop_channel function public Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 33/78] drm/vc4: hvs: Introduce a function to get the assigned FIFO Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 34/78] drm/vc4: crtc: Move the CRTC disable out Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 35/78] drm/vc4: drv: Disable the CRTC at boot time Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 36/78] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 37/78] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 38/78] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-07-08 17:41   ` Maxime Ripard [this message]
2020-07-08 17:41   ` [PATCH v4 40/78] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-07-28 11:58     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 41/78] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 42/78] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 43/78] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 44/78] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 45/78] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 46/78] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 47/78] drm/vc4: hdmi: Retrieve the vc4_hdmi at unbind using our device Maxime Ripard
2020-07-28 12:32     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 48/78] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 49/78] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-07-08 17:41   ` [PATCH v4 50/78] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-07-28 12:37     ` Dave Stevenson
2020-07-08 17:41   ` [PATCH v4 51/78] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-07-28 12:59     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 52/78] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-07-28 13:00     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 53/78] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-07-28 13:03     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 54/78] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-07-28 13:04     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 55/78] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-07-28 13:12     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 56/78] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-07-28 13:18     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 57/78] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-07-28 13:20     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 58/78] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-07-28 13:23     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 59/78] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-07-28 13:25     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 60/78] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-07-28 13:26     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 61/78] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-07-28 14:45     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 62/78] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-07-28 14:56     ` Dave Stevenson
2020-09-01  4:36     ` Chanwoo Choi
2020-09-01  9:45       ` Maxime Ripard
2020-09-01 10:48         ` Chanwoo Choi
2020-07-08 17:42   ` [PATCH v4 63/78] drm/vc4: hdmi: Use clk_set_min_rate instead Maxime Ripard
2020-07-28 14:57     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 64/78] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-07-08 17:42   ` [PATCH v4 65/78] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-07-08 17:42   ` [PATCH v4 66/78] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-07-08 17:42   ` [PATCH v4 67/78] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-07-08 17:42   ` [PATCH v4 68/78] drm/vc4: hdmi: Deal with multiple ALSA cards Maxime Ripard
2020-07-28 15:00     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 69/78] drm/vc4: hdmi: Remove register dumps in enable Maxime Ripard
2020-07-28 15:01     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 70/78] drm/vc4: hdmi: Always recenter the HDMI FIFO Maxime Ripard
2020-07-28 15:03     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 71/78] drm/vc4: hdmi: Implement finer-grained hooks Maxime Ripard
2020-07-28 15:04     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 72/78] drm/vc4: hdmi: Do the VID_CTL configuration at once Maxime Ripard
2020-07-28 15:06     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 73/78] drm/vc4: hdmi: Switch to blank pixels when disabled Maxime Ripard
2020-07-28 15:09     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 74/78] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-07-28 15:21     ` Dave Stevenson
2020-07-08 17:42   ` [PATCH v4 75/78] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-09-01  4:45     ` Chanwoo Choi
2020-09-01  9:52       ` Maxime Ripard
2020-07-08 17:42   ` [PATCH v4 76/78] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-07-08 17:42   ` [PATCH v4 77/78] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-07-28 15:30     ` Dave Stevenson
2020-09-01 10:19       ` Maxime Ripard
2020-07-08 17:42   ` [PATCH v4 78/78] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-07-28 15:35     ` Dave Stevenson
2020-07-10  7:37   ` [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline Jian-Hong Pan
2020-07-10  9:58   ` Stefan Wahren
2020-08-21  7:18   ` Hoegeun Kwon
2020-09-02 13:32     ` Maxime Ripard
2020-09-02 13:52       ` Maxime Ripard
2020-08-31  2:36   ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6070ac45cd27d6b551aafc3bc67f78987a43a47f.1594230107.git-series.maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).