From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Chen-Yu Tsai <wens@csie.org>,
Maxime Ripard <maxime.ripard@bootlin.com>
Cc: devicetree@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Arnd Bergmann <arnd@arndb.de>,
dri-devel@lists.freedesktop.org,
Georgi Djakov <georgi.djakov@linaro.org>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Yong Deng <yong.deng@magewell.com>,
Robin Murphy <robin.murphy@arm.com>,
Dave Martin <dave.martin@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 4/7] of: address: Add support for the parent DMA bus
Date: Thu, 14 Mar 2019 21:26:03 +0100 [thread overview]
Message-ID: <1ed042a4c5b8c13c6692e12b2d630d75effbb90a.1552595146.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.221220f2f28e14ef07cce84e753ac662085d84ff.1552595146.git-series.maxime.ripard@bootlin.com>
Some SoCs have devices that are using a separate bus from the main bus to
perform DMA.
These buses might have some restrictions and/or different mapping than from
the CPU side, so we'd need to express those using the usual dma-ranges, but
using a different DT node than the node's parent.
Now that the generic interconnect bindings are available, we can model an
interconnect with the reserved name "dma" for those use-cases.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
drivers/of/address.c | 29 ++++++++++++++++++++++++++---
1 file changed, 26 insertions(+), 3 deletions(-)
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 140bd0718067..95e47f2e9198 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -678,14 +678,31 @@ u64 of_translate_address(struct device_node *dev, const __be32 *in_addr)
}
EXPORT_SYMBOL(of_translate_address);
+static struct device_node *__of_get_dma_parent(const struct device_node *np)
+{
+ struct of_phandle_args args;
+ int ret, index;
+
+ index = of_property_match_string(np, "interconnect-names", "dma-mem");
+ if (index < 0)
+ return of_get_parent(np);
+
+ ret = of_parse_phandle_with_args(np, "interconnects",
+ "#interconnect-cells",
+ index, &args);
+ if (ret < 0)
+ return of_get_parent(np);
+
+ return of_node_get(args.np);
+}
+
u64 of_translate_dma_address(struct device_node *dev, const __be32 *in_addr)
{
struct device_node *host;
u64 ret;
- ret = __of_translate_address(dev, of_get_parent,
+ ret = __of_translate_address(dev, __of_get_dma_parent,
in_addr, "dma-ranges", &host);
-
if (host) {
of_node_put(host);
return OF_BAD_ADDR;
@@ -913,9 +930,15 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
return -EINVAL;
while (1) {
+ struct device_node *parent;
+
naddr = of_n_addr_cells(node);
nsize = of_n_size_cells(node);
- node = of_get_next_parent(node);
+
+ parent = __of_get_dma_parent(node);
+ of_node_put(node);
+
+ node = parent;
if (!node)
break;
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-03-14 20:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-14 20:25 [PATCH v4 0/7] sunxi: Add DT representation for the MBUS controller Maxime Ripard
2019-03-14 20:26 ` [PATCH v4 1/7] dt-bindings: interconnect: Add a dma interconnect name Maxime Ripard
2019-03-22 16:46 ` Georgi Djakov
2019-03-14 20:26 ` [PATCH v4 2/7] dt-bindings: bus: Add binding for the Allwinner MBUS controller Maxime Ripard
2019-03-14 20:26 ` [PATCH v4 3/7] of: address: Add parent pointer to the __of_translate_address args Maxime Ripard
2019-03-27 12:40 ` Robin Murphy
2019-03-14 20:26 ` Maxime Ripard [this message]
2019-03-27 12:46 ` [PATCH v4 4/7] of: address: Add support for the parent DMA bus Robin Murphy
2019-03-14 20:26 ` [PATCH v4 5/7] drm/sun4i: Rely on dma interconnect for our RAM offset Maxime Ripard
2019-03-27 12:50 ` Robin Murphy
2019-03-14 20:26 ` [PATCH v4 6/7] clk: sunxi-ng: sun5i: Export the MBUS clock Maxime Ripard
2019-03-14 20:26 ` [PATCH v4 7/7] ARM: dts: sun5i: Add the MBUS controller Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ed042a4c5b8c13c6692e12b2d630d75effbb90a.1552595146.git-series.maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=arnd@arndb.de \
--cc=dave.martin@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=frowand.list@gmail.com \
--cc=georgi.djakov@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=paul.kocialkowski@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=wens@csie.org \
--cc=yong.deng@magewell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).