* [Bug 51021] New: Matrox g200 driver mgag200 doesn't work with FS PRIMERGY RX200 S4
@ 2012-11-26 16:01 bugzilla-daemon
2012-11-26 21:03 ` [Bug 51021] " bugzilla-daemon
0 siblings, 1 reply; 2+ messages in thread
From: bugzilla-daemon @ 2012-11-26 16:01 UTC (permalink / raw)
To: dri-devel
https://bugzilla.kernel.org/show_bug.cgi?id=51021
Summary: Matrox g200 driver mgag200 doesn't work with FS
PRIMERGY RX200 S4
Product: Drivers
Version: 2.5
Kernel Version: 3.6.7
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - non Intel)
AssignedTo: drivers_video-dri@kernel-bugs.osdl.org
ReportedBy: igor.sverkos+kernel@googlemail.com
Regression: No
Created an attachment (id=87311)
--> (https://bugzilla.kernel.org/attachment.cgi?id=87311)
This is how the display looks when the mgag200 is loaded
Hi,
sorry - don't know how to better phrase "doesn't work". With doesn't work I
mean, that my screen will look like the attached screenshot.
Relevant lspci output:
rx200s4 ~ # lspci -s 1b: -nn
1b:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA
G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02)
rx200s4 ~ # lspci -s 1b: -xxvv
1b:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200e
[Pilot] ServerEngines (SEP1) (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device 108e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f6000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fc000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [e4] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
<1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0
<64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: mgag200
00: 2b 10 22 05 47 01 10 10 02 00 00 03 10 00 00 00
10: 08 00 00 f6 00 00 00 fc 00 00 80 fc 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 8e 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 00 00
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Bug 51021] Matrox g200 driver mgag200 doesn't work with FS PRIMERGY RX200 S4
2012-11-26 16:01 [Bug 51021] New: Matrox g200 driver mgag200 doesn't work with FS PRIMERGY RX200 S4 bugzilla-daemon
@ 2012-11-26 21:03 ` bugzilla-daemon
0 siblings, 0 replies; 2+ messages in thread
From: bugzilla-daemon @ 2012-11-26 21:03 UTC (permalink / raw)
To: dri-devel
https://bugzilla.kernel.org/show_bug.cgi?id=51021
Igor Sverkos <igor.sverkos+kernel@googlemail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |INVALID
--- Comment #1 from Igor Sverkos <igor.sverkos+kernel@googlemail.com> 2012-11-26 21:03:47 ---
Sorry - mgag200 seems to be working fine. Because the system does not have EFI,
I disabled CONFIG_EFI, which disabled CONFIG_FB_EFI, which is required for
passing gfxpayload from bootloader to kernel, which failed.
See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567245#17
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-11-26 21:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-26 16:01 [Bug 51021] New: Matrox g200 driver mgag200 doesn't work with FS PRIMERGY RX200 S4 bugzilla-daemon
2012-11-26 21:03 ` [Bug 51021] " bugzilla-daemon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).