dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Eric Anholt <eric@anholt.net>
To: dri-devel@lists.freedesktop.org,
	Archit Taneja <architt@codeaurora.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Thierry Reding <thierry.reding@gmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 5/8] drm/vc4: Delay DSI host registration until the panel has probed.
Date: Tue, 27 Jun 2017 12:58:36 -0700	[thread overview]
Message-ID: <20170627195839.3338-6-eric@anholt.net> (raw)
In-Reply-To: <20170627195839.3338-1-eric@anholt.net>

The vc4 driver was unusual in that it was delaying the panel lookup
until the attach step, while most DSI hosts will -EPROBE_DEFER until
they get a panel.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 40 ++++++++++++++++------------------------
 1 file changed, 16 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index fca4d7fd677e..31627522dd8c 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -33,6 +33,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
@@ -504,7 +505,6 @@ struct vc4_dsi {
 	struct mipi_dsi_host dsi_host;
 	struct drm_encoder *encoder;
 	struct drm_bridge *bridge;
-	bool is_panel_bridge;
 
 	void __iomem *regs;
 
@@ -1290,7 +1290,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
 	struct vc4_dsi *dsi = host_to_dsi(host);
-	int ret = 0;
 
 	dsi->lanes = device->lanes;
 	dsi->channel = device->channel;
@@ -1325,34 +1324,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 		return 0;
 	}
 
-	dsi->bridge = of_drm_find_bridge(device->dev.of_node);
-	if (!dsi->bridge) {
-		struct drm_panel *panel =
-			of_drm_find_panel(device->dev.of_node);
-
-		dsi->bridge = drm_panel_bridge_add(panel,
-						   DRM_MODE_CONNECTOR_DSI);
-		if (IS_ERR(dsi->bridge)) {
-			ret = PTR_ERR(dsi->bridge);
-			dsi->bridge = NULL;
-			return ret;
-		}
-		dsi->is_panel_bridge = true;
-	}
-
 	return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
 }
 
 static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
-	struct vc4_dsi *dsi = host_to_dsi(host);
-
-	if (dsi->is_panel_bridge) {
-		drm_panel_bridge_remove(dsi->bridge);
-		dsi->bridge = NULL;
-	}
-
 	return 0;
 }
 
@@ -1496,6 +1473,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	struct vc4_dsi *dsi;
 	struct vc4_dsi_encoder *vc4_dsi_encoder;
+	struct drm_panel *panel;
 	const struct of_device_id *match;
 	dma_cap_mask_t dma_mask;
 	int ret;
@@ -1599,6 +1577,20 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+					  &panel, &dsi->bridge);
+	if (ret) {
+		dev_info(dev, "find panel: %d\n", ret);
+		return ret;
+	}
+
+	if (panel) {
+		dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
+							DRM_MODE_CONNECTOR_DSI);
+		if (IS_ERR(dsi->bridge))
+			return PTR_ERR(dsi->bridge);
+	}
+
 	/* The esc clock rate is supposed to always be 100Mhz. */
 	ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
 	if (ret) {
-- 
2.11.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2017-06-27 19:58 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-27 19:58 [PATCH 0/8] RPi touchscreen panel driver v4 Eric Anholt
2017-06-27 19:58 ` [PATCH 1/8] drm/vc4: Fix DSI T_INIT timing Eric Anholt
2017-06-29  9:02   ` Andrzej Hajda
2017-06-27 19:58 ` [PATCH 2/8] drm/vc4: Fix misleading name of the continuous flag Eric Anholt
2017-06-29  9:03   ` Andrzej Hajda
2017-06-27 19:58 ` [PATCH 3/8] drm/vc4: Use drm_mode_vrefresh() in DSI fixup, in case vrefresh is 0 Eric Anholt
2017-06-29  9:24   ` Andrzej Hajda
2017-06-27 19:58 ` [PATCH 4/8] drm/bridge: Add a devm_ allocator for panel bridge Eric Anholt
2017-06-29  9:30   ` Andrzej Hajda
2017-06-27 19:58 ` Eric Anholt [this message]
2017-06-29  9:42   ` [PATCH 5/8] drm/vc4: Delay DSI host registration until the panel has probed Andrzej Hajda
2017-06-27 19:58 ` [PATCH 6/8] drm: Allow DSI devices to be registered before the host registers Eric Anholt
2017-06-29  5:03   ` Archit Taneja
2017-06-29 10:39     ` Andrzej Hajda
2017-06-29 15:22       ` Eric Anholt
2017-06-30  8:48         ` Andrzej Hajda
2017-07-03 10:56       ` Archit Taneja
2017-07-14 23:01         ` Eric Anholt
2017-07-17 13:39           ` Archit Taneja
2017-07-14 22:58     ` Eric Anholt
2017-07-17  4:26       ` Archit Taneja
2017-07-18 20:13         ` Eric Anholt
2017-07-19  3:29           ` Archit Taneja
2017-08-04  9:29           ` Boris Brezillon
2017-06-27 19:58 ` [PATCH 7/8] dt-bindings: Document the Raspberry Pi Touchscreen nodes Eric Anholt
2017-06-27 19:58 ` [PATCH 8/8] drm/panel: Add support for the Raspberry Pi 7" Touchscreen Eric Anholt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170627195839.3338-6-eric@anholt.net \
    --to=eric@anholt.net \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=architt@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).